Eric Lee / smarc-fsl-linux-kernel

27 Nov, 2011

1 commit

04 Oct, 2011

1 commit

27 Jul, 2011

1 commit

  • 60063497a   atomic: use <linux/atomic.h> ... Browse Code »

    This allows us to move duplicated code in
    (atomic_inc_not_zero() for now) to

    Signed-off-by: Arun Sharma
    Reviewed-by: Eric Dumazet
    Cc: Ingo Molnar
    Cc: David Miller
    Cc: Eric Dumazet
    Acked-by: Mike Frysinger
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Arun Sharma
     

07 Jun, 2011

1 commit

13 Apr, 2011

1 commit

  • 24743537d   atm: iphase: Fix set-but-not-used warnings. ... Browse Code »

    The "iavcc" and "iadev" cases are obvious.

    The intr_status and frmr_intr cases are reading a register to clear
    the chip status. This driver is pretty old and creaky, and uses
    volatile pointer dereferences to do register I/O when it should be
    using readl() and friends. However that it outside of the scope of
    these changes.

    Signed-off-by: David S. Miller

    David S. Miller
     

31 Mar, 2011

1 commit

23 Dec, 2010

1 commit

11 Dec, 2010

1 commit

  • d9ca676bc   atm: correct sysfs 'device' link creation and parent relationships ... Browse Code »

    The ATM subsystem was incorrectly creating the 'device' link for ATM
    nodes in sysfs. This led to incorrect device/parent relationships
    exposed by sysfs and udev. Instead of rolling the 'device' link by hand
    in the generic ATM code, pass each ATM driver's bus device down to the
    sysfs code and let sysfs do this stuff correctly.

    Signed-off-by: Dan Williams
    Signed-off-by: David S. Miller

    Dan Williams
     

02 Nov, 2010

1 commit

  • b595076a1   tree-wide: fix comment/printk typos ... Browse Code »

    "gadget", "through", "command", "maintain", "maintain", "controller", "address",
    "between", "initiali[zs]e", "instead", "function", "select", "already",
    "equal", "access", "management", "hierarchy", "registration", "interest",
    "relative", "memory", "offset", "already",

    Signed-off-by: Uwe Kleine-König
    Signed-off-by: Jiri Kosina

    Uwe Kleine-König
     

12 Oct, 2010

2 commits

17 Aug, 2010

1 commit

  • 6f74dbbc2   drivers/atm: Adjust confusing if indentation ... Browse Code »

    Indent the branch of an if.

    The semantic match that finds this problem is as follows:
    (http://coccinelle.lip6.fr/)

    //
    @r disable braces4@
    position p1,p2;
    statement S1,S2;
    @@

    (
    if (...) { ... }
    |
    if (...) S1@p1 S2@p2
    )

    @script:python@
    p1 << r.p1;
    p2 << r.p2;
    @@

    if (p1[0].column == p2[0].column):
    cocci.print_main("branch",p1)
    cocci.print_secs("after",p2)
    //

    Signed-off-by: Julia Lawall
    Signed-off-by: David S. Miller

    Julia Lawall
     

30 Mar, 2010

1 commit

  • 5a0e3ad6a   include cleanup: Update gfp.h and slab.h includes to prepare for breaking implic… ... Browse Code »

    …it slab.h inclusion from percpu.h

    percpu.h is included by sched.h and module.h and thus ends up being
    included when building most .c files. percpu.h includes slab.h which
    in turn includes gfp.h making everything defined by the two files
    universally available and complicating inclusion dependencies.

    percpu.h -> slab.h dependency is about to be removed. Prepare for
    this change by updating users of gfp and slab facilities include those
    headers directly instead of assuming availability. As this conversion
    needs to touch large number of source files, the following script is
    used as the basis of conversion.

    http://userweb.kernel.org/~tj/misc/slabh-sweep.py

    The script does the followings.

    * Scan files for gfp and slab usages and update includes such that
    only the necessary includes are there. ie. if only gfp is used,
    gfp.h, if slab is used, slab.h.

    * When the script inserts a new include, it looks at the include
    blocks and try to put the new include such that its order conforms
    to its surrounding. It's put in the include block which contains
    core kernel includes, in the same order that the rest are ordered -
    alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
    doesn't seem to be any matching order.

    * If the script can't find a place to put a new include (mostly
    because the file doesn't have fitting include block), it prints out
    an error message indicating which .h file needs to be added to the
    file.

    The conversion was done in the following steps.

    1. The initial automatic conversion of all .c files updated slightly
    over 4000 files, deleting around 700 includes and adding ~480 gfp.h
    and ~3000 slab.h inclusions. The script emitted errors for ~400
    files.

    2. Each error was manually checked. Some didn't need the inclusion,
    some needed manual addition while adding it to implementation .h or
    embedding .c file was more appropriate for others. This step added
    inclusions to around 150 files.

    3. The script was run again and the output was compared to the edits
    from #2 to make sure no file was left behind.

    4. Several build tests were done and a couple of problems were fixed.
    e.g. lib/decompress_*.c used malloc/free() wrappers around slab
    APIs requiring slab.h to be added manually.

    5. The script was run on all .h files but without automatically
    editing them as sprinkling gfp.h and slab.h inclusions around .h
    files could easily lead to inclusion dependency hell. Most gfp.h
    inclusion directives were ignored as stuff from gfp.h was usually
    wildly available and often used in preprocessor macros. Each
    slab.h inclusion directive was examined and added manually as
    necessary.

    6. percpu.h was updated not to include slab.h.

    7. Build test were done on the following configurations and failures
    were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
    distributed build env didn't work with gcov compiles) and a few
    more options had to be turned off depending on archs to make things
    build (like ipr on powerpc/64 which failed due to missing writeq).

    * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
    * powerpc and powerpc64 SMP allmodconfig
    * sparc and sparc64 SMP allmodconfig
    * ia64 SMP allmodconfig
    * s390 SMP allmodconfig
    * alpha SMP allmodconfig
    * um on x86_64 SMP allmodconfig

    8. percpu.h modifications were reverted so that it could be applied as
    a separate patch and serve as bisection point.

    Given the fact that I had only a couple of failures from tests on step
    6, I'm fairly confident about the coverage of this conversion patch.
    If there is a breakage, it's likely to be something in one of the arch
    headers which should be easily discoverable easily on most builds of
    the specific arch.

    Signed-off-by: Tejun Heo <tj@kernel.org>
    Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
    Cc: Ingo Molnar <mingo@redhat.com>
    Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

    Tejun Heo
     

14 Dec, 2009

1 commit

  • 710708e82   drivers/atm: Correct code taking the size of a pointer ... Browse Code »

    sizeof(TstSchedTbl) is just the size of the pointer. Change it to the size
    of the referenced data.

    A simplified version of the semantic patch that finds this problem is as
    follows: (http://coccinelle.lip6.fr/)

    //
    @@
    expression *x;
    expression f;
    type T;
    @@

    *f(...,(T)x,...)
    //

    Signed-off-by: Julia Lawall
    Signed-off-by: David S. Miller

    Julia Lawall
     

04 Dec, 2009

1 commit

  • af901ca18   tree-wide: fix assorted typos all over the place ... Browse Code »

    That is "success", "unknown", "through", "performance", "[re|un]mapping"
    , "access", "default", "reasonable", "[con]currently", "temperature"
    , "channel", "[un]used", "application", "example","hierarchy", "therefore"
    , "[over|under]flow", "contiguous", "threshold", "enough" and others.

    Signed-off-by: André Goddard Rosa
    Signed-off-by: Jiri Kosina

    André Goddard Rosa
     

01 Oct, 2009

1 commit

  • b7058842c   net: Make setsockopt() optlen be unsigned. ... Browse Code »

    This provides safety against negative optlen at the type
    level instead of depending upon (sometimes non-trivial)
    checks against this sprinkled all over the the place, in
    each and every implementation.

    Based upon work done by Arjan van de Ven and feedback
    from Linus Torvalds.

    Signed-off-by: David S. Miller

    David S. Miller
     

22 Mar, 2009

1 commit

09 Jan, 2009

1 commit

31 Jul, 2008

1 commit

18 Jun, 2008

2 commits

17 Jun, 2008

2 commits

20 Apr, 2008

1 commit

  • 420635f51   drivers/atm: use time_before, time_before_eq, etc ... Browse Code »

    The functions time_before, time_before_eq, time_after, and time_after_eq
    are more robust for comparing jiffies against other values.

    A simplified version of the semantic patch making this change is as follows:
    (http://www.emn.fr/x-info/coccinelle/)

    //
    @ change_compare_np @
    expression E;
    @@

    (
    - jiffies = E
    + time_after_eq(jiffies,E)
    |
    - jiffies < E
    + time_before(jiffies,E)
    |
    - jiffies > E
    + time_after(jiffies,E)
    )

    @ include depends on change_compare_np @
    @@

    #include

    @ no_include depends on !include && change_compare_np @
    @@

    #include
    + #include
    //

    Signed-off-by: Julia Lawall
    Signed-off-by: Andrew Morton
    Signed-off-by: David S. Miller

    Julia Lawall
     

02 Apr, 2008

1 commit

14 Aug, 2007

1 commit

12 Jul, 2007

1 commit

  • 44c10138f   PCI: Change all drivers to use pci_device->revision ... Browse Code »
    86

    Instead of all drivers reading pci config space to get the revision
    ID, they can now use the pci_device->revision member.

    This exposes some issues where drivers where reading a word or a dword
    for the revision number, and adding useless error-handling around the
    read. Some drivers even just read it for no purpose of all.

    In devices where the revision ID is being copied over and used in what
    appears to be the equivalent of hotpath, I have left the copy code
    and the cached copy as not to influence the driver's performance.

    Compile tested with make all{yes,mod}config on x86_64 and i386.

    Signed-off-by: Auke Kok
    Acked-by: Dave Jones
    Signed-off-by: Greg Kroah-Hartman

    Auke Kok
     

30 Nov, 2006

1 commit

05 Oct, 2006

1 commit

  • 7d12e780e   IRQ: Maintain regs pointer globally rather than passing to IRQ handlers ... Browse Code »

    Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
    of passing regs around manually through all ~1800 interrupt handlers in the
    Linux kernel.

    The regs pointer is used in few places, but it potentially costs both stack
    space and code to pass it around. On the FRV arch, removing the regs parameter
    from all the genirq function results in a 20% speed up of the IRQ exit path
    (ie: from leaving timer_interrupt() to leaving do_IRQ()).

    Where appropriate, an arch may override the generic storage facility and do
    something different with the variable. On FRV, for instance, the address is
    maintained in GR28 at all times inside the kernel as part of general exception
    handling.

    Having looked over the code, it appears that the parameter may be handed down
    through up to twenty or so layers of functions. Consider a USB character
    device attached to a USB hub, attached to a USB controller that posts its
    interrupts through a cascaded auxiliary interrupt controller. A character
    device driver may want to pass regs to the sysrq handler through the input
    layer which adds another few layers of parameter passing.

    I've build this code with allyesconfig for x86_64 and i386. I've runtested the
    main part of the code on FRV and i386, though I can't test most of the drivers.
    I've also done partial conversion for powerpc and MIPS - these at least compile
    with minimal configurations.

    This will affect all archs. Mostly the changes should be relatively easy.
    Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

    struct pt_regs *old_regs = set_irq_regs(regs);

    And put the old one back at the end:

    set_irq_regs(old_regs);

    Don't pass regs through to generic_handle_irq() or __do_IRQ().

    In timer_interrupt(), this sort of change will be necessary:

    - update_process_times(user_mode(regs));
    - profile_tick(CPU_PROFILING, regs);
    + update_process_times(user_mode(get_irq_regs()));
    + profile_tick(CPU_PROFILING);

    I'd like to move update_process_times()'s use of get_irq_regs() into itself,
    except that i386, alone of the archs, uses something other than user_mode().

    Some notes on the interrupt handling in the drivers:

    (*) input_dev() is now gone entirely. The regs pointer is no longer stored in
    the input_dev struct.

    (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
    something different depending on whether it's been supplied with a regs
    pointer or not.

    (*) Various IRQ handler function pointers have been moved to type
    irq_handler_t.

    Signed-Off-By: David Howells
    (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

    David Howells
     

03 Jul, 2006

1 commit

30 Jun, 2006

1 commit

10 Sep, 2005

1 commit

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds