30 Jul, 2011
1 commit
-
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits)
[media] ir-mce_kbd-decoder: include module.h for its facilities
[media] ov5642: include module.h for its facilities
[media] em28xx: Fix DVB-C maxsize for em2884
[media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz
[media] v4l: mt9v032: Fix Bayer pattern
[media] V4L: mt9m111: rewrite set_pixfmt
[media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear
[media] V4L: initial driver for ov5642 CMOS sensor
[media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails
[media] V4L: soc-camera: remove soc-camera bus and devices on it
[media] V4L: soc-camera: un-export the soc-camera bus
[media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier
[media] V4L: add media bus configuration subdev operations
[media] V4L: soc-camera: group struct field initialisations together
[media] V4L: soc-camera: remove now unused soc-camera specific PM hooks
[media] V4L: pxa-camera: switch to using standard PM hooks
[media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param
[media] Don't OOPS if videobuf_dvb_get_frontend return NULL
[media] NetUP Dual DVB-T/C CI RF: load firmware according card revision
[media] omap3isp: Support configurable HS/VS polarities
...Fix up conflicts:
- arch/arm/mach-omap2/board-rx51-peripherals.c:
cleanup regulator supply definitions in mach-omap2
vs
OMAP3: RX-51: define vdds_csib regulator supply
- drivers/staging/tm6000/tm6000-alsa.c (trivial)
28 Jul, 2011
39 commits
-
Add control definitions and documentation for controls
specific to codec devices.Signed-off-by: Kamil Debski
Signed-off-by: Kyungmin Park
Signed-off-by: Mauro Carvalho Chehab -
Add fourcc definitions and documentation for the following
compressed formats: H264, H264 without start codes,
MPEG1/2/4 ES, XVID, VC1 Annex G and Annex L compliant.Signed-off-by: Kamil Debski
Signed-off-by: Kyungmin Park
Signed-off-by: Mauro Carvalho Chehab -
Document V4L2 control endianness as machine endianness.
Signed-off-by: Sakari Ailus
Signed-off-by: Mauro Carvalho Chehab -
Add documentation for V4L2 flash controls.
Signed-off-by: Sakari Ailus
Acked-by: Laurent Pinchart
Signed-off-by: Mauro Carvalho Chehab -
[mchehab@redhat.com: Fix a merge conflict and make compat.xml coherent with v4l2.xml]
Signed-off-by: Hans Verkuil
Acked-by: Sakari Ailus
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans de Goede
Signed-off-by: Mauro Carvalho Chehab -
Currently, -EINVAL is used to return either when an IOCTL is not
implemented, or if the ioctl was not implemented.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
While here, removes the bogus EINTERNAL error codes.
Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Move generic stuff into gen-errors.xml, and remove them from
DVB API. While here, removes two bogus error codes that aren't
supported or used on Linux: EINTERNAL and ENOSIGNAL.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Remove generic errors from ioctl() descriptions. For other ioctl's,
there's no generic section. So, just keep whatever is there.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Remove generic errors from ioctl() descriptions. For other ioctl's,
there's no generic section. So, just keep whatever is there.
Also remove the EINTERNAL error code, as no DVB driver returns
it, and this error code is not defined on POSIX or on Linux.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Just like the V4L, MC and LIRC API's, point to the generic error
chapter for ioctl's. This will allow moving generic error codes
to just one place inside all media API's.A latter patch will remove the generic errors from each specific
ioctl.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Add a reference for the generic error code chapter to LIRC ioctl
description.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
V4L ioctl function descripton also has a generic error chapter.
Remove it, as it is now obsoleted by a general, multi-API generic
error descriptions.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
The EBUSY is already described as a generic error condition, with a
similar text.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Instead of having their own generic error codes at the MC API, move
its section to the generic one and be sure that all media ioctl's
will point to it.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Be sure that all VIDIOC_* ioctl are using the return error macro, and
aren't specifying generic error codes internally.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
There are several errors reported by V4L that aren't described.
They can occur on almost all ioctl's. Instead of adding them
into each ioctl, create a new chapter.For V4L, the new chapter will automatically be listed on all
places, as there's a macro used everywhere there.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Normally no control events will go to the filehandle that called the
VIDIOC_S_CTRL/VIDIOC_S_EXT_CTRLS ioctls. This is to prevent a feedback
loop.This can now be overridden by setting the new V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK
flag.Based on suggestions from Mauro Carvalho Chehab and
Laurent Pinchart .Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Starting with v3.1 the V4L2 API provides certain guarantees with respect to
events. Document these.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
The old V4L1 Kernel copatibility layer was removed, but the API
spec still says that it is there.Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Bjørn Mork
Signed-off-by: Mauro Carvalho Chehab -
The patch utility doesn't work with non-binary files. This causes some
tools to break, like generating tarball targets and the scripts that
generate diff patches at http://www.kernel.org/pub/linux/kernel/v2.6/.So, let's convert all binaries to ascii using base64, and add a
logic at Makefile to convert them back into binaries at runtime.Reported-by: Randy Dunlap
Reported-by: Andrew Morton
Reviewed-by: Michal Marek
Signed-off-by: Mauro Carvalho Chehab -
While here, remove the mediaindexdocs from PHONY.
Reported-by: Randy Dunlap
Signed-off-by: Mauro Carvalho Chehab -
Now, all data structures are commented. A few ioctls remain undocumented:
Error: no ID for constraint linkend: VIDEO_GET_SIZE.
Error: no ID for constraint linkend: VIDEO_GET_FRAME_RATE.
Error: no ID for constraint linkend: VIDEO_GET_PTS.
Error: no ID for constraint linkend: VIDEO_GET_FRAME_COUNT.
Error: no ID for constraint linkend: VIDEO_COMMAND.
Error: no ID for constraint linkend: VIDEO_TRY_COMMAND.Signed-off-by: Mauro Carvalho Chehab
-
Make the reference links at video.h.xml to match the ones at video.xml.
Signed-off-by: Mauro Carvalho Chehab
-
The av7110 uses an OSD API. Such API is not documented at all. Also,
the osd.h API uses camelCase and some other weird stuff. Also, dvb-core
doesn't recognize it.I don't see any good reason why we should document it. It seems better
to just let it as-is. If ever needed, it is probably better to write
a different API for dvb-core.Signed-off-by: Mauro Carvalho Chehab
-
There's no documentation at all for the DVB net API. Still, better to
remove a few warnings about the missing symbols. So, add the net data
structure inside the net.xml. Now, only the ioctl documentation is missed.Signed-off-by: Mauro Carvalho Chehab
-
Still, there are a few ioctl's not documented:
Error: no ID for constraint linkend: DMX_GET_PES_PIDS.
Error: no ID for constraint linkend: DMX_GET_CAPS.
Error: no ID for constraint linkend: DMX_SET_SOURCE.
Error: no ID for constraint linkend: DMX_ADD_PID.
Error: no ID for constraint linkend: DMX_REMOVE_PID.Signed-off-by: Mauro Carvalho Chehab
-
Make the reference links at dmx.h.xml to match the ones at demux.xml.
While here, also syncronizes the structures defined inside the API,
in order to match the current API.Signed-off-by: Mauro Carvalho Chehab
-
This is the remaining missing structure at ca.xml. The ioctl's are still
missing through.Signed-off-by: Mauro Carvalho Chehab
-
Make sure that both ca.h.xml and ca.xml will match the same names for
the sections/links.This way, it is now possible to identify API spec gaps:
Error: no ID for constraint linkend: ca-pid.
Error: no ID for constraint linkend: ca-pid.
Error: no ID for constraint linkend: CA_RESET.
Error: no ID for constraint linkend: CA_GET_CAP.
Error: no ID for constraint linkend: CA_GET_SLOT_INFO.
Error: no ID for constraint linkend: CA_GET_DESCR_INFO.
Error: no ID for constraint linkend: CA_GET_MSG.
Error: no ID for constraint linkend: CA_SEND_MSG.
Error: no ID for constraint linkend: CA_SET_DESCR.
Error: no ID for constraint linkend: CA_SET_PID.Basically, in this case, no CA ioctl is described at the specs, and one
file structure (ca-pid) is missing.Signed-off-by: Mauro Carvalho Chehab
-
Although this ioctl is only used at the av7110 driver, it is not
described at the API docbook. Yet, AUDIO_PAUSE ioctl description
somewhat describes it. Fill the gap by using the information there
and by looking inside av7110 implementation.Signed-off-by: Mauro Carvalho Chehab
-
Some attributes suffered some changes since DVBv1. Sync them with the
current API header files.Signed-off-by: Mauro Carvalho Chehab
