31 Mar, 2011
1 commit
-
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi
31 Dec, 2010
1 commit
-
This adds a more informative error code and message
for the iscsi scsi eh session drop paths. This allows
you to distinguish if the session was dropped due to
a connection failure vs the iscsi layer dropping
the session due to scsi eh failure processing.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
28 Jul, 2010
1 commit
-
Signed-off-by: Vikas Chaudhary
Signed-off-by: Ravi Anand
Reviewed-by: Mike Christie
Signed-off-by: James Bottomley
05 Dec, 2009
1 commit
-
This implements warm target reset tmf support for
the scsi-ml target reset callback. Previously we would
just drop the session in that callback. This patch will
now try a target reset and if that fails drop the session.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
05 Sep, 2009
1 commit
-
If a target closed the connection, we will detect it in the
state_changed or data_ready callout. This adds a new conn
error value to use for this problem, so it is not confused
with when the initiator throws a conn error and drops
the connection.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
09 Jun, 2009
1 commit
-
Add ISCSI_NETLINK messages for iSCSI NICs to get information such as
path from userspace. Original iscsid messages are now always sent as
multicast to group 1. The new messages are sent to group 2.The multicast changes were made by Mike Christie.
Signed-off-by: Michael Chan
Signed-off-by: Benjamin Li
Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
24 May, 2009
1 commit
-
When we create the tcp/ip connection by calling ep_connect, we currently
just go by the routing table info.I think there are two problems with this.
1. Some drivers do not have access to a routing table. Some drivers like
qla4xxx do not even know about other ports.2. If you have two initiator ports on the same subnet, the user may have
set things up so that session1 was supposed to be run through port1. and
session2 was supposed to be run through port2. It looks like we could
end with both sessions going through one of the ports.Fixes for cxgb3i from Karen Xie.
Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
30 Dec, 2008
2 commits
-
cxgb3i does not offload the processing of the header,
but it will always process the padding. This patch
adds a padding offload flag to detect when the LLD
supports this.The patch also modifies the header processing so that
we do not try to read/bypass the header dugest in the
skb. cxgb3i will not include it with the header like
with other offload cards.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
cxgb3i is unlike qla4xxx and bnx2i in that it does not offload entire
scsi commands or iscsi sequences. Instead it only offloads the transfer
of a ISCSI DATA_IN pdu's data, the digests and padding. This patch fixes up the
iscsi tcp recv path so that it exports its skb recv processing so
cxgb3i and other drivers can call them. All they have to do is pass
the function the skb with the hdr or data pdu header and this function
will do the rest.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
13 Oct, 2008
2 commits
-
The segment->done functions return a iscsi error value which gives
a lot more info than conn failed, so this patch has us return
that value. I also add a new one for xmit failures.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
If the driver knows when hardware is removed like with cxgb3i,
bnx2i, qla4xxx and iser then we will want to remove the sessions/devices
that are bound to that device before removing the host.cxgb3i and in the future bnx2i will remove the host and that will
remove all the sessions on the hba. iser can call iscsi_kill_session
when it gets an event that indicates that a hca is removed.
And when qla4xxx is hooked in to the lib (it is only hooked into
the class right now) it can call iscsi remove host like the
partial offload card drivers.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
12 Jul, 2008
4 commits
-
This adds two new attrs used for creating initiator ports and
binding sessions to hardware.The session level initiatorname:
Since bnx2i does a scsi_host per host device, we need to add the
iface initiator port settings on the session, so we can create
multiple initiator ports (each with different inames) per device/scsi_host.The current iname reflects that qla4xxx can have one iname per hba, and we are
allocating a host per session for software. The iname on the host will
remain so we can export and set the hba level qla4xxx setting.The ifacename attr:
To bind a session to a some peice of hardware in userspace we maintain
some mappings, but during boot or iscsid restart (iscsid contains the user
space part of the driver) we need to be able to figure out which of those
host mappings abstractions maps to certain sessions. This patch adds
a ifacename attr, which userspace can set to id the host side of the
endpoint across pivot_roots and iscsid restarts.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
Add sysfs representation for the endpoint, so userspace can match the
host and session to the endpoint. This will allow us to set the host's
parent correctly at host creation time.The next patches will convert tcp and iser, and fix iser's dma_mask
bug.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
bnx2i allocates a host per netdevice but will use libiscsi,
so this unbinds the session from the host in that code.This will also be useful for the iser parent device dma settings
fixes.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
iscsi offload (bnx2i and qla4xx) allocate a scsi host per hba,
so the session creation path needs a shost/host_no argument.
Software iscsi/iser will follow the same behabior as before
where it allcoates a host per session, but in the future iser
will probably look more like bnx2i where the host's parent is
the hardware (rnic for iser and for bnx2i it is the nic), because
it does not use a socket layer like how iscsi_tcp does.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
12 Jan, 2008
3 commits
-
During root boot and shutdown the target could send us nops.
At this time iscsid cannot be running, so the target will drop
the session and the boot or shutdown will hang.To handle this and allow us to better control when to check the network
this patch moves the nop handling to the kernel.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
We were using the device delete sysfs file to remove each device
then logout. Now in 2.6.21 this will not work because
the sysfs delete file returns immediately and does not wait for
the device removal to complete. This causes a hang if a cache sync
is needed during shutdown. Before .21, that approach had other
problems, so this patch fixes the shutdown code so that we remove the target
and unbind the session before logging out and shut down the sessionSigned-off-by: Mike Christie
Signed-off-by: James Bottomley -
This patch adds logical unit reset support. This should work for ib_iser,
but I have not finished testing that driver so it is not hooked in yet.This patch also temporarily reverts the iscsi_tcp r2t write out patch.
That code is completely rewritten in this patchset.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
03 Jun, 2007
4 commits
-
iSCSI must support software iscsi (iscsi_tcp, iser), hardware iscsi (qla4xxx),
and partial offload (broadcom). To be able to allow each stack or driver
or port (virtual or physical) to be able to log into the same target portal
we use the initiator tuple [[HWADDRESS | NETDEVNAME], INITIATOR_NAME] and
the target tuple [TARGETNAME, CONN_ADDRESS, CONN_PORT] to id a session.
This patch adds the netdev name, which is used by software iscsi when
it binds a session to a netdevice using the SO_BINDTODEVICE sock opt.
It cannot use HWADDRESS because if someone did vlans then the same netdevice
will have the same mac and the initiator,target id will not be unique.Signed-off-by: Mike Christie
Cc: Roland Dreier
Cc: David C Somayajulu
Signed-off-by: James Bottomley -
This patch exports the local address for the session. For
qla4xxx this is the ip of the hba's port. For software
this is the src addr of the socket.Signed-off-by: Mike Christie
Cc: David C Somayajulu
Signed-off-by: James Bottomley -
Userspace will want to know what the driver/FW/HW capabilites
when it comes to some operations like if the hardware can
do discovery or if it can store iscsi info like what target
was used for boot. This patch adds some new caps so userspace
can tell if the driver supports hardware/fw based sendtargets
discovery and if the hardware has some flash which may be
holding or can contain some iscsi target info
.
Signed-off-by: Mike Christie
Cc: David C Somayajulu
Signed-off-by: James Bottomley -
This patch allows us to set can_queue and cmds_per_lun from userspace
when we create the session/host. From there we can set it on a per
target basis. The patch fully converts iscsi_tcp, but only hooks
up ib_iser for cmd_per_lun since it currently has a lots of preallocations
based on can_queue.Signed-off-by: Mike Christie
Cc: Roland Dreier
Signed-off-by: James Bottomley
02 Jun, 2007
4 commits
-
The attached patches add sysfs files for the chap settings
to the iscsi transport class, iscsi_tcp and ib_iser. This is
needed for software iscsi because there are times when iscsid
can die and it will need to reread the values it was using.
And it is needed by qla4xxx for basic management opertaions.
This patch does not hook in qla4xxx yet, because I am not sure
the mbx command to use.Signed-off-by: Mike Christie
Cc: Roland Dreier
Signed-off-by: James Bottomley -
For iscsi root boot, software iscsi needs to know what the BIOS/OF
initiator used for the initiator name so this puts it in sysfs
for userspace to be able to pick up.For hw iscsi, it is nice to see what the card is using.
This patch adds the new param, and hooks in qla4xxx, iscsi_tcp, and ib_iser.
Signed-off-by: Mike Christie
Cc: Roland Dreier
Cc: David C Somayajulu
Signed-off-by: James Bottomley -
The iscsi class uses the set_param event to set session
and connection params. This patch adds a set_host_param
so we can set host level values.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
Add hw address sysfs file.
Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
29 Jun, 2006
2 commits
-
This patch adds or modifies the transport class functions
used to notify userspace of session state events.We modify the session addition up event and add a destruction event
to notify userspace of session creation, relogin and destruction.And we modify the conn error event to be sent by broadcast
since multiple listeners may want to listen for it.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
Patch from david.somayajulu@qlogic.com:
Add target discovery event. We may have a setup where the iscsi traffic
is on a different netowrk than the other network traffic. In this case
we will want to do discovery though the iscsi card. This patch adds
a event to the transport class that can be used by hw iscsi cards that
support this.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
10 May, 2006
2 commits
-
debugged by Ming and Rohan:
The problem Ming and Rohan debugged was that during a normal session
login, open-iscsi is not incrementing the exp_statsn counter. It was
stuck at zero. From the RFC, it looks like if the login response PDU has
a successful status then we should be incrementing that value. Also from
the RFC, it looks like if when we drop a connection then reconnect, we
should be using the exp_statsn from the old connection in the next
relogin attempt.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
add transport end point callbacks so iscsi drivers that cannot connect
from userspace, like iscsi tcp, using sockets do not have to
implement their own socket infrastructure.Signed-off-by: Or Gerlitz
Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
15 Apr, 2006
4 commits
-
There is a lot of code duplcited between iscsi_tcp
and the upcoming iscsi_iser driver. This patch puts
the duplicated code in a lib. There is more code
to move around but this takes care of the
basics. For iscsi_offload if they use the lib we will
probably move some things around. For example in the
queuecommand we will not assume that the LLD wants
to do queue_work, but it is better to handle that
later when we know for sure what iscsi_offload looks
like (we could probably do this for iscsi_iser though to).Ideally I would like to get the iscsi_transports modules
to a place where all they really have to do is put data
on the wire, but how to do that will hopefully be more clear
when we see other modules like iscsi_offload. Or maybe
iscsi_offload will not use the lib and it will just be
iscsi_iser and iscsi_tcp and maybe the iscsi_tcp_tgt if that
is allowed in mainline.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
The current iscsi_tcp eh is not nicely setup for dm-multipath
and performs some extra task management functions when they
are not needed.The attached patch:
- Fixes the TMF issues. If a session is rebuilt
then we do not send aborts.- Fixes the problem where if the host reset fired, we would
return SUCCESS even though we had not really done anything
yet. This ends up causing problem with scsi_error.c's TUR.- If someone has turned on the userspace nop daemon code to try
and detect network problems before the scsi command timeout
we can now drop and clean up the session before the scsi command
timesout and fires the eh speeding up the time it takes for a
command to go from one patch to another. For network problems
we fail the command with DID_BUS_BUSY so if failfast is set
scsi_decide_disposition fails the command up to dm for it to
try on another path.- And we had to add some basic iscsi session block code. Previously
if we were trying to repair a session we would retrun a MLQUEUE code
in the queuecommand. This worked but it was not the most efficient
or pretty thing to do since it would take a while to relogin
to the target. For iscsi_tcp/open-iscsi a lot of the iscsi error handler
is in userspace the block code is pretty bare. We will be
adding to that for qla4xxx.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
For iscsi boot when going from initramfs to the real root we
need to stop the userpsace iscsi daemon. To later restart it
iscsid needs to be able to rebuild itself and part of that
process is matching a session running the kernel with the
iscsid representation. To do this the attached patch
adds several required iscsi values. If the LLD does not provide
them becuase, login is done in userspace, then the transport
class and userspace set ths up for the LLD.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley -
from hare@suse.de and michaelc@cs.wisc.edu
hw iscsi like qla4xxx does not allocate a host per session and
for userspace it is difficult to restart iscsid using the
"iscsi handles" for the session and connection, so this
patch just has the class or userspace allocate the id for
the session and connection.Note: this breaks userspace and requires users to upgrade to the newest
open-iscsi tools. Sorry about his but open-iscsi is still too new to
say we have a stable user-kernel api and we were not good nough
designers to know that other hw iscsi drivers and iscsid itself would
need such changes. Actually we sorta did but at the time we did not
have the HW available to us so we could only guess.Luckily, the only tools hooking into the class are the open-iscsi ones
or other tools like iscsitart hook into the open-iscsi engine from
userspace or prgroams like anaconda call our tools so they are not affected.Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
05 Feb, 2006
1 commit
-
From:
michaelc@cs.wisc.edu
fujita.tomonori@lab.ntt.co.jp
da-x@monatomic.organd err path fixup from:
ogerlitz@voltaire.comThis patch cleans up that interface by having the lld and class
pass a iscsi_cls_session or iscsi_cls_conn between each other when
the function is used by HW and SW iscsi llds. This way the lld
does not have to remember if it has to send a handle or pointer
and a handle or pointer to connection, session or host.This also has the class verify the session handle that gets passed from
userspace instead of using the pointer passed into the kernel directly.Signed-off-by: Mike Christie
Signed-off-by: Alex Aizman
Signed-off-by: Dmitry Yusupov
Signed-off-by: James Bottomley
15 Jan, 2006
1 commit
-
This is the second version of the patch to address Christoph's comments.
Instead of doing the lib, I just kept everything in scsi_trnapsort_iscsi.c
like the FC and SPI class. This was becuase the driver model and sysfs
class is tied to the session and connection setup so separating did not
buy very much at this time.The reason for this patch was becuase HW iscsi LLDs like qla4xxx cannot
use the iscsi class becuase the scsi_host was tied to the interface and
class code. This patch just seperates the session from scsi host so
that LLDs that allocate the host per some resource like pci device
can still use the class.This is also fixes a couple refcount bugs that can be triggered
when users have a sysfs file open, close the session, then
read or write to the file.Signed-off-by: Alex Aizman
Signed-off-by: Dmitry Yusupov
Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
06 Aug, 2005
1 commit
-
open-iscsi-headers.patch - common header files:
- iscsi_if.h (user/kernel #defines and user/kernel events);
- iscsi_proto.h (RFC3720 #defines and types);
- scsi_transport_iscsi.h (transport API, transport #defines and types).Signed-off-by: Alex Aizman
Signed-off-by: Dmitry Yusupov
Signed-off-by: Mike Christie
Signed-off-by: James Bottomley
