10 Nov, 2016
1 commit
-
Introduce the hash:ipmac type.
Signed-off-by: Tomasz Chili??ski
Signed-off-by: Jozsef Kadlecsik
16 Sep, 2014
1 commit
-
Signed-off-by: Jozsef Kadlecsik
06 Mar, 2014
1 commit
-
Introduce packet mark support with new ip,mark hash set. This includes
userspace and kernelspace code, hash:ip,mark set tests and man page
updates.The intended use of ip,mark set is similar to the ip:port type, but for
protocols which don't use a predictable port number. Instead of port
number it matches a firewall mark determined by a layer 7 filtering
program like opendpi.As well as allowing or blocking traffic it will also be used for
accounting packets and bytes sent for each protocol.Signed-off-by: Jozsef Kadlecsik
01 Oct, 2013
2 commits
-
This adds a new set that provides similar functionality to ip,port,net
but permits arbitrary size subnets for both the first and last
parameter.Signed-off-by: Oliver Smith
Signed-off-by: Jozsef Kadlecsik -
This adds a new set that provides the ability to configure pairs of
subnets. A small amount of additional handling code has been added to
the generic hash header file - this code is conditionally activated by a
preprocessor definition.Signed-off-by: Oliver Smith
Signed-off-by: Jozsef Kadlecsik
17 Jun, 2011
1 commit
-
The hash:net,iface type makes possible to store network address and
interface name pairs in a set. It's mostly suitable for egress
and ingress filtering. Examples:# ipset create test hash:net,iface
# ipset add test 192.168.0.0/16,eth0
# ipset add test 192.168.0.0/24,eth1Signed-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy
01 Feb, 2011
11 commits
-
The module implements the list:set type support in two flavours:
without and with timeout. The sets has two sides: for the userspace,
they store the names of other (non list:set type of) sets: one can add,
delete and test set names. For the kernel, it forms an ordered union of
the member sets: the members sets are tried in order when elements are
added, deleted and tested and the process stops at the first success.Signed-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy -
The module implements the hash:net,port type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are two dimensional: IPv4/IPv6 network address/prefix and protocol/port
pairs.Signed-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy -
The module implements the hash:net type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are one dimensional: IPv4/IPv6 network address/prefixes.Signed-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy -
The module implements the hash:ip,port,net type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are three dimensional: IPv4/IPv6 address, protocol/port and IPv4/IPv6
network address/prefix triples. The different prefixes are searched/matched
from the longest prefix to the shortes one (most specific to least).
In other words the processing time linearly grows with the number of
different prefixes in the set.Signed-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy -
The module implements the hash:ip,port,ip type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are three dimensional: IPv4/IPv6 address, protocol/port and IPv4/IPv6
address triples.Signed-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy -
The module implements the hash:ip,port type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are two dimensional: IPv4/IPv6 address and protocol/port pairs. The port
is interpeted for TCP, UPD, ICMP and ICMPv6 (at the latters as type/code
of course).Signed-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy -
The module implements the hash:ip type support in four flavours:
for IPv4 or IPv6, both without and with timeout support.All the hash types are based on the "array hash" or ahash structure
and functions as a good compromise between minimal memory footprint
and speed. The hashing uses arrays to resolve clashes. The hash table
is resized (doubled) when searching becomes too long. Resizing can be
triggered by userspace add commands only and those are serialized by
the nfnl mutex. During resizing the set is read-locked, so the only
possible concurrent operations are the kernel side readers. Those are
protected by RCU locking.Because of the four flavours and the other hash types, the functions
are implemented in general forms in the ip_set_ahash.h header file
and the real functions are generated before compiling by macro expansion.
Thus the dereferencing of low-level functions and void pointer arguments
could be avoided: the low-level functions are inlined, the function
arguments are pointers of type-specific structures.Signed-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy -
The module implements the bitmap:port type in two flavours, without
and with timeout support to store TCP/UDP ports from a range.Signed-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy -
The module implements the bitmap:ip,mac set type in two flavours,
without and with timeout support. In this kind of set one can store
IPv4 address and (source) MAC address pairs. The type supports elements
added without the MAC part filled out: when the first matching from kernel
happens, the MAC part is automatically filled out. The timing out of the
elements stars when an element is complete in the IP,MAC pair.Signed-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy -
The module implements the bitmap:ip set type in two flavours, without
and with timeout support. In this kind of set one can store IPv4
addresses (or network addresses) from a given range.In order not to waste memory, the timeout version does not rely on
the kernel timer for every element to be timed out but on garbage
collection. All set types use this mechanism.Signed-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy -
The patch adds the IP set core support to the kernel.
The IP set core implements a netlink (nfnetlink) based protocol by which
one can create, destroy, flush, rename, swap, list, save, restore sets,
and add, delete, test elements from userspace. For simplicity (and backward
compatibilty and for not to force ip(6)tables to be linked with a netlink
library) reasons a small getsockopt-based protocol is also kept in order
to communicate with the ip(6)tables match and target.The netlink protocol passes all u16, etc values in network order with
NLA_F_NET_BYTEORDER flag. The protocol enforces the proper use of the
NLA_F_NESTED and NLA_F_NET_BYTEORDER flags.For other kernel subsystems (netfilter match and target) the API contains
the functions to add, delete and test elements in sets and the required calls
to get/put refereces to the sets before those operations can be performed.The set types (which are implemented in independent modules) are stored
in a simple RCU protected list. A set type may have variants: for example
without timeout or with timeout support, for IPv4 or for IPv6. The sets
(i.e. the pointers to the sets) are stored in an array. The sets are
identified by their index in the array, which makes possible easy and
fast swapping of sets. The array is protected indirectly by the nfnl
mutex from nfnetlink. The content of the sets are protected by the rwlock
of the set.There are functional differences between the add/del/test functions
for the kernel and userspace:- kernel add/del/test: works on the current packet (i.e. one element)
- kernel test: may trigger an "add" operation in order to fill
out unspecified parts of the element from the packet (like MAC address)
- userspace add/del: works on the netlink message and thus possibly
on multiple elements from the IPSET_ATTR_ADT container attribute.
- userspace add: may trigger resizing of a setSigned-off-by: Jozsef Kadlecsik
Signed-off-by: Patrick McHardy