04 Jan, 2017

1 commit

  • Add support for the SPI serial flash host controller found on many Intel
    CPUs including Baytrail and Braswell. The SPI serial flash controller is
    used to access BIOS and other platform specific information. By default the
    driver exposes a single read-only MTD device but with a module parameter
    "writeable=1" the MTD device can be made read-write which makes it possible
    to upgrade BIOS directly from Linux.

    Signed-off-by: Mika Westerberg
    Acked-by: Cyrille Pitchen
    Signed-off-by: Lee Jones

    Mika Westerberg
     

18 Nov, 2015

1 commit


11 Jun, 2014

1 commit

  • Pull MTD updates from Brian Norris:
    - refactor m25p80.c driver for use as a general SPI NOR framework for
    other drivers which may speak to SPI NOR flash without providing full
    SPI support (i.e., not part of drivers/spi/)
    - new Freescale QuadSPI driver (utilizing new SPI NOR framework)
    - updates for the STMicro "FSM" SPI NOR driver
    - fix sync/flush behavior on mtd_blkdevs
    - fixup subpage write support on a few NAND drivers
    - correct the MTD OOB test for odd-sized OOB areas
    - add BCH-16 support for OMAP NAND
    - fix warnings and trivial refactoring
    - utilize new ECC DT bindings in pxa3xx NAND driver
    - new LPDDR NVM driver
    - address a few assorted bugs caught by Coverity
    - add new imx6sx support for GPMI NAND
    - use a bounce buffer for NAND when non-DMA-able buffers are used

    * tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits)
    mtd: gpmi: add gpmi support for imx6sx
    mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE
    mtd: bf5xx_nand: use the managed version of kzalloc
    mtd: pxa3xx_nand: make the driver work on big-endian systems
    mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error
    mtd: nand: r852: correct write_buf loop bounds
    mtd: nand_bbt: handle error case for nand_create_badblock_pattern()
    mtd: nand_bbt: remove unused variable
    mtd: maps: sc520cdp: fix warnings
    mtd: slram: fix unused variable warning
    mtd: pfow: remove unused variable
    mtd: lpddr: fix Kconfig dependency, for I/O accessors
    mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding
    mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding
    mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling
    mtd: nand: Warn the user if the selected ECC strength is too weak
    mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ?
    mtd: nand: omap: add support for BCH16_ECC - NAND driver updates
    mtd: nand: omap: add support for BCH16_ECC - ELM driver updates
    mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates
    ...

    Linus Torvalds
     

05 May, 2014

1 commit


15 Apr, 2014

2 commits


04 Jan, 2014

1 commit


27 Aug, 2013

1 commit


04 Aug, 2010

1 commit

  • Below you will find an updated version from the original series bunching all patches into one big patch
    updating broken web addresses that are located in Documentation/*
    Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
    the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
    Now there are also some addresses pointing to .spec files some are located, but some(after searching
    on the companies site)where still no where to be found. In this case I just changed the address
    to the company site this way the users can contact the company and they can locate them for the users.

    Signed-off-by: Justin P. Mattock
    Signed-off-by: Thomas Weber
    Signed-off-by: Mike Frysinger
    Cc: Paulo Marques
    Cc: Randy Dunlap
    Cc: Michael Neuling
    Signed-off-by: Jiri Kosina

    Justin P. Mattock
     

13 Jun, 2009

1 commit


16 Aug, 2008

1 commit