04 Oct, 2011
1 commit
-
Simon Kirby reported that on his RAID setup with idedisk underneath
the box OOMs after a couple of days of runtime. Running with
CONFIG_DEBUG_KMEMLEAK pointed to idedisk_prep_fn() which unconditionally
allocates an ide_cmd struct. However, ide_requeue_and_plug() can be
called more than once per request, either from the request issue or the
IRQ handler path and do blk_peek_request() ends up in idedisk_prep_fn()
repeatedly, allocating a struct ide_cmd everytime and "forgetting" the
previous pointer.Make sure the code reuses the old allocated chunk.
Reported-and-tested-by: Simon Kirby
Cc: [ 39.x, 3.0.x ]
Link: http://marc.info/?l=linux-kernel&m=131667641517919
Link: http://lkml.kernel.org/r/20110922072643.GA27232@hostway.ca
Signed-off-by: Borislav Petkov
Signed-off-by: David S. Miller
25 Oct, 2010
1 commit
-
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
Update broken web addresses in arch directory.
Update broken web addresses in the kernel.
Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
Revert "Fix typo: configuation => configuration" partially
ida: document IDA_BITMAP_LONGS calculation
ext2: fix a typo on comment in ext2/inode.c
drivers/scsi: Remove unnecessary casts of private_data
drivers/s390: Remove unnecessary casts of private_data
net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
drivers/infiniband: Remove unnecessary casts of private_data
drivers/gpu/drm: Remove unnecessary casts of private_data
kernel/pm_qos_params.c: Remove unnecessary casts of private_data
fs/ecryptfs: Remove unnecessary casts of private_data
fs/seq_file.c: Remove unnecessary casts of private_data
arm: uengine.c: remove C99 comments
arm: scoop.c: remove C99 comments
Fix typo configue => configure in comments
Fix typo: configuation => configuration
Fix typo interrest[ing|ed] => interest[ing|ed]
Fix various typos of valid in comments
...Fix up trivial conflicts in:
drivers/char/ipmi/ipmi_si_intf.c
drivers/usb/gadget/rndis.c
net/irda/irnet/irnet_ppp.c
10 Sep, 2010
1 commit
-
Barrier is deemed too heavy and will soon be replaced by FLUSH/FUA
requests. Deprecate barrier. All REQ_HARDBARRIERs are failed with
-EOPNOTSUPP and blk_queue_ordered() is replaced with simpler
blk_queue_flush().blk_queue_flush() takes combinations of REQ_FLUSH and FUA. If a
device has write cache and can flush it, it should set REQ_FLUSH. If
the device can handle FUA writes, it should also set REQ_FUA.All blk_queue_ordered() users are converted.
* ORDERED_DRAIN is mapped to 0 which is the default value.
* ORDERED_DRAIN_FLUSH is mapped to REQ_FLUSH.
* ORDERED_DRAIN_FLUSH_FUA is mapped to REQ_FLUSH | REQ_FUA.Signed-off-by: Tejun Heo
Acked-by: Boaz Harrosh
Cc: Christoph Hellwig
Cc: Nick Piggin
Cc: Michael S. Tsirkin
Cc: Jeremy Fitzhardinge
Cc: Chris Wright
Cc: FUJITA Tomonori
Cc: Geert Uytterhoeven
Cc: David S. Miller
Cc: Alasdair G Kergon
Cc: Pierre Ossman
Cc: Stefan Weinhuber
Signed-off-by: Jens Axboe
19 Aug, 2010
1 commit
-
Signed-off-by: Tao Ma
Acked-by: Jeff Garzik
Signed-off-by: Jiri Kosina
08 Aug, 2010
3 commits
-
This removes q->prepare_flush_fn completely (changes the
blk_queue_ordered API).Signed-off-by: FUJITA Tomonori
Reviewed-by: Christoph Hellwig
Signed-off-by: Jens Axboe -
use REQ_FLUSH flag instead.
Signed-off-by: FUJITA Tomonori
Acked-by: David S. Miller
Reviewed-by: Christoph Hellwig
Signed-off-by: Jens Axboe -
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests. This allows much easier grepping for different request
types instead of unwinding through macros.Signed-off-by: Christoph Hellwig
Signed-off-by: Jens Axboe
22 May, 2010
1 commit
-
bdops->set_capacity() is unnecessarily generic. All that's required
is a simple one way notification to lower level driver telling it to
try to unlock native capacity. There's no reason to pass in target
capacity or return the new capacity. The former is always the
inherent native capacity and the latter can be handled via the usual
device resize / revalidation path. In fact, the current API is always
used that way.Replace ->set_capacity() with ->unlock_native_capacity() which take
only @disk and doesn't return anything. IDE which is the only current
user of the API is converted accordingly.Signed-off-by: Tejun Heo
Cc: Ben Hutchings
Cc: Bartlomiej Zolnierkiewicz
Acked-by: David S. Miller
Signed-off-by: Jens Axboe
26 Feb, 2010
1 commit
-
The block layer calling convention is blk_queue_.
blk_queue_max_sectors predates this practice, leading to some confusion.
Rename the function to appropriately reflect that its intended use is to
set max_hw_sectors.Also introduce a temporary wrapper for backwards compability. This can
be removed after the merge window is closed.Signed-off-by: Martin K. Petersen
Signed-off-by: Jens Axboe
22 Jul, 2009
1 commit
-
I'm using ide on 2.6.30.1 with xfs filesystem. I noticed a kernel memory
leak after writing lots of data, the kmalloc-96 slab cache keeps
growing. It seems the struct ide_cmd kmalloced by idedisk_prepare_flush
is never kfreed.Commit a09485df9cda49fbde2766c86eb18a9cae585162 ("ide: move request
type specific code from ide_end_drive_cmd() to callers (v3)") and
f505d49ffd25ed062e76ffd17568d3937fcd338c ("ide: fix barriers support")
cause this regression, cmd->rq must now be set for ide_complete_cmd to
honor the IDE_TFLAG_DYN flag.Signed-off-by: Maxime Bizon
Acked-by: Bartlomiej Zolnierkiewicz
Signed-off-by: David S. Miller
16 Jun, 2009
1 commit
-
Unsupported requests should be never handed down to device drivers
and the best thing we can do upon discovering such request inside
driver's ->do_request method is to just BUG().Signed-off-by: Bartlomiej Zolnierkiewicz
13 Jun, 2009
1 commit
-
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits)
ide: re-implement ide_pci_init_one() on top of ide_pci_init_two()
ide: unexport ide_find_dma_mode()
ide: fix PowerMac bootup oops
ide: skip probe if there are no devices on the port (v2)
sl82c105: add printk() logging facility
ide-tape: fix proc warning
ide: add IDE_DFLAG_NIEN_QUIRK device flag
ide: respect quirk_drives[] list on all controllers
hpt366: enable all quirks for devices on quirk_drives[] list
hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c
ide: remove superfluous SELECT_MASK() call from do_rw_taskfile()
ide: remove superfluous SELECT_MASK() call from ide_driveid_update()
icside: remove superfluous ->maskproc method
ide-tape: fix IDE_AFLAG_* atomic accesses
ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically
pdc202xx_old: kill resetproc() method
pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout
pdc202xx_old: use ide_dma_test_irq()
ide: preserve Host Protected Area by default (v2)
ide-gd: implement block device ->set_capacity method (v2)
...
07 Jun, 2009
3 commits
-
From the perspective of most users of recent systems, disabling Host
Protected Area (HPA) can break vendor RAID formats, GPT partitions and
risks corrupting firmware or overwriting vendor system recovery tools.Unfortunately the original (kernels < 2.6.30) behavior (unconditionally
disabling HPA and using full disk capacity) was introduced at the time
when the main use of HPA was to make the drive look small enough for the
BIOS to allow the system to boot with large capacity drives.Thus to allow the maximum compatibility with the existing setups (using
HPA and partitioned with HPA disabled) we automically disable HPA if
any partitions overlapping HPA are detected. Additionally HPA can also
be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0"
to disable HPA on /dev/hda).v2:
Fix ->resume HPA support.While at it:
- remove stale "idebus=" entry from Documentation/kernel-parameters.txtCc: Robert Hancock
Cc: Frans Pop
Cc: "Andries E. Brouwer"
Cc: Al Viro
Acked-by: Sergei Shtylyov
[patch description was based on input from Alan Cox and Frans Pop]
Emphatically-Acked-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Use ->probed_capacity to store native device capacity for ATA disks.
* Add ->set_capacity method to struct ide_disk_ops.
* Implement disk device ->set_capacity method for ATA disks.
* Implement block device ->set_capacity method.
v2:
* Check if LBA and HPA are supported in ide_disk_set_capacity().* According to the spec the SET MAX ADDRESS command shall be
immediately preceded by a READ NATIVE MAX ADDRESS command.* Add ide_disk_hpa_{get_native,set}_capacity() helpers.
Together with the previous patch adding ->set_capacity block device
method this allows automatic disabling of Host Protected Area (HPA)
if any partitions overlapping HPA are detected.Cc: Robert Hancock
Cc: Frans Pop
Cc: "Andries E. Brouwer"
Cc: Al Viro
Emphatically-Acked-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz
23 May, 2009
1 commit
-
The recent move to accessor functions for querying queue limits
missed an entry in ide-disk.c:drivers/ide/ide-disk.c: In function ‘ide_disk_setup’:
drivers/ide/ide-disk.c:642: error: ‘struct request_queue’ has no member named ‘max_sectors’Fix it.
Signed-off-by: Martin K. Petersen
Signed-off-by: Jens Axboe
18 May, 2009
1 commit
-
Replace:
- special_t typedef by IDE_SFLAG_* flags
- 'special_t special' ide_drive_t's field by 'u8 special_flags' oneThere should be no functional changes caused by this patch.
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz
11 May, 2009
1 commit
-
ide doesn't manipulate request fields anymore and thus all hard and
their soft equivalents are always equal. Convert all references to
accessors.[ Impact: use pos and nr_sectors accessors ]
Signed-off-by: Tejun Heo
Acked-by: Bartlomiej Zolnierkiewicz
Cc: Borislav Petkov
Cc: Sergei Shtylyov
Signed-off-by: Jens Axboe
28 Apr, 2009
1 commit
-
ide doesn't have to worry about REQ_SOFTBARRIER. Don't set it.
Signed-off-by: Tejun Heo
19 Apr, 2009
1 commit
-
ide doesn't have to worry about REQ_SOFTBARRIER. Don't set it.
Signed-off-by: Tejun Heo
08 Apr, 2009
2 commits
-
Make 'struct ide_taskfile' cover only 8 register values and thus put two such
fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array'
field from it.This required changing the prototype of ide_get_lba_addr() and ide_tf_dump().
Signed-off-by: Sergei Shtylyov
[bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()]
Signed-off-by: Bartlomiej Zolnierkiewicz -
Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on
input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register
validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct
ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can
then be turned from 32-bit into 8-bit one).Signed-off-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz
01 Apr, 2009
1 commit
-
Make use of ATA_ERR instead of hard-coded value in idedisk_set_max_address()
and idedisk_read_native_max_address().Signed-off-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz
27 Mar, 2009
10 commits
-
* Pass number of bytes instead of sectors to ide_init_sg_cmd().
* Pass number of bytes to process to ide_pio_sector() and rename
it to ide_pio_bytes().* Rename ->nsect field to ->nbytes in struct ide_cmd and use
->nbytes, ->nleft and ->cursg_ofs to keep track of number of
bytes instead of sectors.There should be no functional changes caused by this patch.
Acked-by: Borislav Petkov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Set IDE_TFLAG_WRITE flag and ->rq also for ATA_CMD_PACKET
commands.* Pass command to ->dma_setup method and update all its
implementations accordingly.* Pass command instead of request to ide_build_sglist(),
*_build_dmatable() and ide_map_sg().While at it:
* Fix scc_dma_setup() documentation + use ATA_DMA_WR define.
* Rename sgiioc4_build_dma_table() to sgiioc4_build_dmatable(),
change return value type to 'int' and drop unused 'ddir'
argument.* Do some minor cleanups in [tx4939]ide_dma_setup().
There should be no functional changes caused by this patch.
Acked-by: Borislav Petkov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Add ide_rq_bytes() helper.
* Add blk_noretry_request() quirk to ide_complete_rq() (currently only fs
requests can be marked as "noretry" so there is no change in behavior).* Switch current ide_end_request() users to use ide_complete_rq().
[ No need to check for rq->nr_sectors == 0 in {ide_dma,task_pio}_intr(),
nsectors == 0 in cdrom_end_request() and err == 0 in ide_do_devset(). ]* Remove no longer needed ide_end_request().
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
Move rq->errors quirk out from ide_end_request() to its call sites.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Add IDE_TFLAG_MULTI_PIO taskfile flag and set it for commands
using multi-PIO protocol.* Use ata_tf_protocols enums instead of TASKFILE_* defines to
denote command's protocol and then rename ->data_phase field
to ->protocol.* Remove no longer needed includes.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Move command related fields from ide_hwif_t to struct ide_cmd.
* Make ide_init_sg_cmd() take command and sectors number as arguments.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Add IDE_TFLAG_FS taskfile flag and set it for REQ_TYPE_FS requests.
* Convert ->{in,out}put_data methods to take command instead of request
as an argument. Then convert pre_task_out_intr(), task_end_request(),
task_error(), task_in_unexpected(), ide_pio_sector(), ide_pio_multi()
and ide_pio_datablock() in similar way.* Rename task_end_request() to ide_finish_cmd().
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
While at it:
- rename struct ide_task_s to struct ide_cmd
- remove stale comments from idedisk_{read_native,set}_max_address()
- drop unused 'cmd' argument from ide_{cmd,task}_ioctl()
- drop unused 'task' argument from tx4939ide_tf_load_fixup()
- rename ide_complete_task() to ide_complete_cmd()
- use consistent naming for struct ide_cmd variablesThere should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Handle completion of private driver requests explicitly
for ide_floppy and ide_tape media in ide_kill_rq().* Remove no longer needed ->end_request method.
There should be no functional changes caused by this patch.
Acked-by: Borislav Petkov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Always use hwif->task->data_phase and remove ->data_phase
field from ide_hwif_t.* Remove superfluous REQ_TYPE_ATA_TASKFILE check from
ide_pio_datablock() while at it.There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz
15 Jan, 2009
1 commit
-
Some rotating disks also present themselves as CFA devices.
Reported-by: Alan Cox
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz
07 Jan, 2009
1 commit
-
Signed-off-by: Bartlomiej Zolnierkiewicz
03 Nov, 2008
1 commit
-
Signed-off-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz
24 Oct, 2008
1 commit
-
Signed-off-by: Bartlomiej Zolnierkiewicz
18 Oct, 2008
3 commits
-
* Add struct ide_disk_ops containing protocol specific methods.
* Add 'struct ide_disk_ops *' to ide_drive_t.
* Convert ide-{disk,floppy} drivers to use struct ide_disk_ops.
* Merge ide-{disk,floppy} drivers into generic ide-gd driver.
While at it:
- ide_disk_init_capacity() -> ide_disk_get_capacity()Acked-by: Borislav Petkov
Signed-off-by: Bartlomiej Zolnierkiewicz -
While at it:
- IDEDISK_VERSION -> IDE_GD_VERSION
- ide_cacheflush_p() -> ide_disk_flush()
- init_idedisk_capacity() -> ide_disk_init_capacity()
- idedisk_set_doorlock() -> ide_disk_set_doorlock()
- idedisk_setup() -> ide_disk_setup()- ide_disk_capacity() -> ide_gd_capacity()
- ide_disk_remove() -> ide_gd_remove()
- ide_disk_probe() -> ide_gd_probe()
- ide_disk_resume() -> ide_gd_resume()
- ide_device_shutdown() -> ide_gd_shutdown()
- idedisk_driver -> ide_gd_driver
- idedisk_open() -> ide_gd_open()
- idedisk_release() -> ide_gd_release()
- idedisk_getgeo() -> ide_gd_getgeo()
- idedisk_media_changed() -> ide_gd_media_changed()
- idedisk_revalidate_disk() -> ide_gd_revalidate_disk()
- idedisk_ops -> ide_gd_ops
- idedisk_init() -> ide_gd_init()
- idedisk_exit() -> ide_gd_exit()There should be no functional changes caused by this patch.
Acked-by: Borislav Petkov
Signed-off-by: Bartlomiej Zolnierkiewicz -
There should be no functional changes caused by this patch.
Acked-by: Borislav Petkov
Signed-off-by: Bartlomiej Zolnierkiewicz