26 Jun, 2006
6 commits
-
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IB/iser: iSER Kconfig and Makefile
IB/iser: iSER handling of memory for RDMA
IB/iser: iSER RDMA CM (CMA) and IB verbs interaction
IB/iser: iSER initiator iSCSI PDU and TX/RX
IB/iser: iSCSI iSER transport provider high level code
IB/iser: iSCSI iSER transport provider header file
IB/uverbs: Remove unnecessary list_del()s
IB/uverbs: Don't free wr list when it's known to be empty -
Priority: not critical.
Mark 3 functions __init. Saves a little memory.
This makes these functions' calls to AdvWaitEEPCmd() (which is __init)
be clean (i.e., eliminates text -> init -> text call chain).Fix multiple section mismatch warnings:
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a22) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a4e) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a79) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7aa2) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7abb) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7ae0) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b0c) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b37) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b60) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b79) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7b9e) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bca) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bf5) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c1e) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c37) and 'AdvExeScsiQueue'Signed-off-by: Randy Dunlap
Cc: James Bottomley
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Fix section warning:
WARNING: drivers/scsi/megaraid/megaraid_mbox.o - Section mismatch: reference to .init.text: from .text between 'megaraid_probe_one' (at offset 0x171e) and 'megaraid_queue_command'Signed-off-by: Randy Dunlap
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
From: Randy Dunlap
Fix section mismatch in wd7000 driver:
WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xa5d)
WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xab6)
WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xb67Signed-off-by: Randy Dunlap
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Signed-off-by: Roman Zippel
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Signed-off-by: Roman Zippel
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
24 Jun, 2006
4 commits
-
Signed-off-by: David S. Miller
-
Do not try to kfree(esp), scsi_host_put() takes care of that.
Signed-off-by: David S. Miller
-
This also turns the driver into a new-style scsi driver.
Signed-off-by: David S. Miller
-
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (258 commits)
[libata] conversion to new debug scheme, part 1 of $N
[PATCH] libata: Add ata_scsi_dev_disabled
[libata] Add host lock to struct ata_port
[PATCH] libata: implement per-dev EH action mask eh_info->dev_action[]
[PATCH] libata-dev: move the CDB-intr DMA blacklisting
[PATCH] ahci: disable NCQ support on vt8251
[libata] ahci: add JMicron PCI IDs
[libata] sata_nv: add PCI IDs
[libata] ahci: Add NVIDIA PCI IDs.
[PATCH] libata: convert several bmdma-style controllers to new EH, take #3
[PATCH] sata_via: convert to new EH, take #3
[libata] sata_nv: s/spin_lock_irqsave/spin_lock/ in irq handler
[PATCH] sata_nv: add hotplug support
[PATCH] sata_nv: convert to new EH
[PATCH] sata_nv: better irq handlers
[PATCH] sata_nv: simplify constants
[PATCH] sata_nv: kill struct nv_host_desc and nv_host
[PATCH] sata_nv: kill not-working hotplug code
[libata] Update docs to reflect current driver API
[PATCH] libata: add host_set->next for legacy two host_sets case, take #3
...
23 Jun, 2006
13 commits
-
Signed-off-by: Eric Sesterhenn
Signed-off-by: Alexey Dobriyan
Cc: Bartlomiej Zolnierkiewicz
Cc: Alan Cox
Cc: James Bottomley
Acked-by: "Salyzyn, Mark"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Pass the POSIX lock owner ID to the flush operation.
This is useful for filesystems which don't want to store any locking state
in inode->i_flock but want to handle locking/unlocking POSIX locks
internally. FUSE is one such filesystem but I think it possible that some
network filesystems would need this also.Also add a flag to indicate that a POSIX locking request was generated by
close(), so filesystems using the above feature won't send an extra locking
request in this case.Signed-off-by: Miklos Szeredi
Cc: Trond Myklebust
Cc: Al Viro
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The wd33c93 needs a small delay before a new command can be started.
Signed-off-by: Roman Zippel
Cc: James Bottomley
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The first 25% of libata-core.c converted to the new debugging scheme.
Signed-off-by:
(with addition of ATA_MSG_WARN to standard msg_enable by me)
Signed-off-by: Jeff Garzik -
Separate out parts of ata_scsi_find_dev to be reused in
future SAS/SATA patches.Acked-by: Jeff Garzik
Signed-off-by: Brian King
Signed-off-by: Jeff Garzik -
Prepare for changes required to support SATA devices
attached to SAS HBAs. For these devices we don't want to
use host_set at all, since libata will not be the owner
of struct scsi_host.Signed-off-by: Brian King
(with slight merge modifications made by...)
Signed-off-by: Jeff Garzik -
Currently, the only per-dev EH action is REVALIDATE. EH used to
exploit ehi->dev to do selective revalidation on a ATA bus. However,
this is a bit hacky and makes it impossible to request selective
revalidation from outside of EH or add another per-dev EH action.This patch adds per-dev EH action mask eh_info->dev_action[] and
update EH to use this field for REVALIDATE. Note that per-dev actions
can still be specified at port-level and it has the same effect of
specifying the action for all devices on the port.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
Move the DMA blacklisting of the CDB-intr devices
from ata_check_atapi_dma() to ata_dma_blacklisted(), where it makes more sense.Signed-off-by: Albert Lee
Signed-off-by: Jeff Garzik -
vt8251 chokes on NCQ commands. Two different disks from different
vendors are showing the same symptom and it seems that the windows
driver from via doesn't support NCQ either. Disable NCQ support on
this controller for the time being.Signed-off-by: Tejun Heo
Cc: Aalderd Bouwman
Cc: Bastiaan Jacques
Signed-off-by: Jeff Garzik -
Originally contributed by Justin @ JMicron.
Signed-off-by: Jeff Garzik
-
Based on a patch contributed by Andrew Chew @ NVIDIA.
Signed-off-by: Jeff Garzik
-
Based on a patch by Andrew Chew @ NVIDIA.
Signed-off-by: Jeff Garzik
-
Conflicts:
drivers/scsi/libata-core.c
drivers/scsi/libata-scsi.c
include/linux/pci_ids.h
22 Jun, 2006
3 commits
-
Kconfig and Makefile for iSER.
Signed-off-by: Or Gerlitz
Signed-off-by: Roland Dreier -
Move various QLogic, Vitesse, and Intel storage controller PCI IDs to the
main header file.Signed-off-by: Brent Casavant
Acked-by: Jes Sorensen
Signed-off-by: Andrew Morton
Signed-off-by: Greg Kroah-Hartman -
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits)
[SCSI] 53c700: remove reliance on deprecated cmnd fields
[SCSI] hptiop: don't use cmnd->bufflen
[SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
[SCSI] aacraid: small misc. cleanups
[SCSI] aacraid: Update supported product information
[SCSI] aacraid: Fix return code interpretation
[SCSI] scsi_transport_sas: fix panic in sas_free_rphy
[SCSI] remove RQ_SCSI_* flags
[SCSI] remove scsi_request infrastructure
[SCSI] mptfusion: change driver revision to 3.03.10
[SCSI] mptfc: abort of board reset leaves port dead requiring reboot
[SCSI] mptfc: fix fibre channel infinite request/response loop
[SCSI] mptfc: set fibre channel fw target missing timers to one second
[SCSI] mptfusion: move fc event/reset handling to mptfc
[SCSI] spi transport: don't allow dt to be set on SE or HVD buses
[SCSI] aic7xxx: expose the bus setting to sysfs
[SCSI] scsi: remove Documentation/scsi/cpqfc.txt
[SCSI] drivers/scsi: Use ARRAY_SIZE macro
[SCSI] Remove last page_address from dc395x.c
[SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
...Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to
the sparc interrupt cleanups)
20 Jun, 2006
14 commits
-
Convert sata_sis, svw, uli and vsc drivers to new EH. All the drivers
used to specify ATA_FLAG_SATA_RESET to tell libata to use SATA
hardreset instead of SRST. This patch makes all the converted drivers
use the standard bmdma error handler which uses both SRST and SATA
hardreset.All the controllers should be able to perform SRST but still needs
verification. If some of the controllers can't do SRST, it will be
very easy to spot as it will show up during boot probing.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
Convert sata_via to new EH. vt6420 used ATA_FLAG_SRST while vt6421
used ATA_FLAG_SATA_RESET. This difference seems to be an accident
rather than intended. This patch makes both flavors use
ata_bmdma_error_handler() which makes use of both SRST and SATA
hardreset. This behavior change is intended and if it breaks
anything, it should be very easy to spot.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
We don't need to use the heavier spin lock in the irq handler.
It's quite possible we can do this in nv_generic_interrupt() as well,
but I didn't take the time to pursue that train of thought.Signed-off-by: Jeff Garzik
-
Add hotplug support.
Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
Convert to new EH.
Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
nf2/3 and ck804 have irq status register. Implement better irq
handler for those flavors of nv. This patch makes different flavors
of nv controllers use different irq handlers by using separate
port_info for each flavor.This change also makes following EH and hotplug updates easier to
integrate.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
Simplify interrupt constants and make NFORCE3 equal to NFORCE2.
Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
nv_host_desc and nv_host are used to discern different generations of
nv controllers. Kill those. New EH/hotplug implementation will use
standard port_info/ata_port_operations for that.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
sata_nv contained hotplug code which is mainly for demonstrating how
hotplug event is handled. This patch kills the demo code in
prepration for real hotplug implementation.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
This ugly hack was long overdue to die.
It was a way to print out Sparc interrupts in a more freindly format,
since IRQ numbers were arbitrary opaque 32-bit integers which vectored
into PIL levels. These 32-bit integers were not necessarily in the
0-->NR_IRQS range, but the PILs they vectored to were.The idea now is that we will increase NR_IRQS a little bit and use a
virtualreal IRQ number mapping scheme similar to PowerPC.That makes this IRQ printing hack irrelevant, and furthermore only a
handful of drivers actually used __irq_itoa() making it even less
useful.Signed-off-by: David S. Miller
-
Doing a full ata_busy_sleep() seems to get suspend and resume working
fine on the Apple Mac Mini, at least.Signed-off-by: Linus Torvalds
-
This one's quite tricky. The 53c700 uses the now deprecated fields of
the command structure for saving the prior command when it does
autosense. To fix this, we have to add extra fields to the LUN to
accommodate a copy of the real command.Signed-off-by: James Bottomley
-
use cmnd->request_bufflen instead.
Signed-off-by: James Bottomley
-
Updates:
- don't bypass SYNCHRONIZE_CACHE command
- return SCSI_MLQUEUE_HOST_BUSY when no free request slots
- move scsi_remove_host() to the begin of hpt_remove(), or it will
not work after resources being released.Signed-off-by: HighPoint Linux Team
Signed-off-by: James Bottomley
