15 Oct, 2008
1 commit
-
Manual fixup of conflicts on:
arch/powerpc/include/asm/dcr-regs.h
drivers/net/ibm_newemac/core.h
14 Oct, 2008
2 commits
-
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (313 commits)
V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards
V4L/DVB (9185): S2API: Ensure we have a reasonable ROLLOFF default
V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by default.
V4L/DVB (9183): S2API: Return error of the caller provides 0 commands.
V4L/DVB (9182): S2API: Added support for DTV_HIERARCHY
V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and DTV_TRANSMISSION_MODE
V4L/DVB (9180): S2API: Added support for DTV_CODE_RATE_HP/LP
V4L/DVB (9179): S2API: frontend.h cleanup
V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO.
V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16
V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator.
V4L/DVB (9175): Remove NULL pointer in stb6000 driver.
V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator.
V4L/DVB (9173): S2API: Remove the hardcoded command limit during validation
V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the legacy API.
V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API.
V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the cx24116 demod.
V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams.
V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote
V4L/DVB: v4l2-dev: remove duplicated #include
... -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (33 commits)
ALSA: ASoC codec: remove unused #include
ALSA: ASoC: update email address for Liam Girdwood
ALSA: hda: corrected invalid mixer values
ALSA: hda: add mixers for analog mixer on 92hd75xx codecs
ALSA: ASoC: Add destination and source port for DMA on OMAP1
ALSA: ASoC: Drop device registration from GTA01 lm4857 driver
ALSA: ASoC: Fix build of GTA01 audio driver
ALSA: ASoC: Add widgets before setting endpoints on GTA01
ALSA: ASoC: Fix inverted input PGA mute bits in WM8903
ALSA: ASoC: OMAP: Set DMA stream name at runtime in McBSP DAI driver
ALSA: ASoC: OMAP: Add support for OMAP2430 and OMAP34xx in McBSP DAI driver
ALSA: ASoC: OMAP: Add multilink support to McBSP DAI driver
ALSA: ASoC: Make TLV320AIC26 user-visible
ALSA: ASoC - clean up Kconfig for TLV320AIC2
ALSA: ASoC: Make WM8510 microphone input a DAPM mixer
ALSA: ASoC: Implement WM8510 bias level control
ALSA: ASoC: Remove unused AUDIO_NAME define from codec drivers
ALSA: ASoC: tlv320aic3x: Use uniform tlv320aic naming
ALSA: ASoC: Add WM8510 SPI support
ALSA: ASoC: Add WM8753 SPI support
...
13 Oct, 2008
34 commits
-
The files below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
sound/soc/codecs/ad1980.c
sound/soc/codecs/wm8580.c
sound/soc/codecs/wm8900.cThis patch removes the said #include .
Signed-off-by: Huang Weiyi
Signed-off-by: Takashi Iwai -
Update the contact information for Liam Girdwood in ASoC core and
drivers as my old email address is no longer valid.Signed-off-by: Liam Girdwood
Signed-off-by: Takashi Iwai -
Corrected invalid mixer index values on the 92hd71bxxx codec branch.
Signed-off-by: Matthew Ranostay
Signed-off-by: Takashi Iwai -
Add support for mixers on the analog mixer on some 92hd75xx codecs,
along with adding a 'Mixer' entry for it's connection on the dmux.Signed-off-by: Matthew Ranostay
Signed-off-by: Takashi Iwai -
Adds destination and source port for dma in platform driver as
required by OMAP1Signed-off-by: Arun KS
Acked-by: Jarkko Nikula
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Device registration should be handled at the machine level and not
in the driver code itself. This patch removes the device registration
from the driver code in preparation for moving it to the machine
definition.[Squashed down two parts to this patch for bisectability - there's also
a third part adding registration of the device to the out of tree GTA01
machine driver -- broonie]Signed-off-by: Jonas Bonn
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Fix a couple of thinkos introduced during the I2C API update.
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
This prevents error messages at startup where the endpoints are being
set before the widgets/controls have even been added.Signed-off-by: Jonas Bonn
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
This suits better when adding support for multiple links and different
link formats.Signed-off-by: Jarkko Nikula
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Thanks to Arun KS for fixing one typo in
original version of this patch.Signed-off-by: Jarkko Nikula
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Jarkko Nikula
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
The TLV320AIC26 Kconfig option is unusual in that it supports the
OpenFirmware machine driver which doesn't have a hard binding to the
codec driver but discovers the codec via the device tree. This makes it
meaningful to select the codec without a machine driver.Ideally there would be a proxy entry so that this option was only
visible on OpenFirmware systems.Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Removed unnecessary dependency. Also, make it uninteractive, as it's
only for selection by other configs.Signed-off-by: Takashi Iwai
-
The WM8510 microphone input PGA was represented as a DAPM PGA but in
DAPM terms the functionality is that of a mixer since it takes three
switchable inputs and produces one output. Representing it as an input
was causing its controls to be misinterpreted as gain controls and
would cause some required DAPM updates to be missed.Reported-by: Jukka Hynninen
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
The WM8510 bias level configuration blindly overwrites the power
management registers, interfering with the operation of DAPM.
Only adjust the specific bits required, implementing use of the VMID
resistor string configuration control as we go.Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Jarkko Nikula
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Jarkko Nikula
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Implement SPI support for WM8510, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Implement SPI support for WM8753, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Replaces SOC_ENUM with custom SOC_SINGLE_TLV for Sidetone volume
Signed-off-by: Arun KS
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Enables DSP DAI format for McBSP in OMAP platform driver
Signed-off-by: Arun KS
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Adding ASoC machine driver for osk5912
Signed-off-by: Arun KS
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
ASoC codec driver for TLV320AIC23 device
Signed-off-by: Arun KS
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
With MMAP enabled (DMA mode) on the AD1981, there is +/- 250ms of delay between
writing data to alsa and audio starts coming out of the AD1981.Copy more data to local buffer before starting DMA
Signed-off-by: Cliff Cai
Signed-off-by: Bryan Wu
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Cliff Cai
Signed-off-by: Bryan Wu
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Cliff Cai
Signed-off-by: Bryan Wu
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Cliff Cai
Signed-off-by: Bryan Wu
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
The ASoC machine drivers for this board were only provided as examples
for the new AT91 ASoC platform driver. Since the ETI-B1 board is
proprietary and there are other AT91 ASoC machine drivers available,
it makes sense to remove these drivers.Signed-off-by: Frank Mandarino
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai -
Add a new API call snd_soc_dapm_nc_pin() which allows machine drivers to
mark pins as being permanently disabled. At present this is identical
to snd_soc_dapm_disable_pin() except in terms of improving the internal
documentation of machine drivers that use it. The intention is that in
future it will be extended to provide additional features such as hiding
controls that are only relevant to paths using the disconnected pin.Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai
12 Oct, 2008
3 commits
-
Use the new video_drvdata(filp) function where it is safe to do so.
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Move the video_exclusive_open/release functionality into the
driver itself.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Conflicts:
sound/core/memalloc.c