24 Apr, 2008

1 commit

  • free_irq() calls synchronize_irq() for you, so there is no need for
    drivers to manually do the same thing (again). Thus, calls where
    sync-irq immediately precedes free-irq can be simplified.

    However, during this audit several bugs were noticed, where free-irq is
    preceded by a "irq >= 0" check... but the sync-irq call is not covered
    by the same check.

    So, where sync-irq could not be eliminated completely, the missing check
    was added.

    Signed-off-by: Jeff Garzik
    Signed-off-by: Takashi Iwai

    Jeff Garzik
     

01 Feb, 2008

2 commits

  • With the Solo1 (es1938) I got a lot of xrun's during capture on my machine.
    Tracing that down it seems to be comming from reading ocassionaly bad hw
    pointers from the chip. This patch uses more checking to avoid that false
    pointer reads.
    Failed reads are giving back the last good value read instead of spinning in
    a tight loop, which seems more appropriate to me in an interrupt. I think I
    saw this trick used in another driver

    Signed-off-by: Hermann Lauer
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Hermann Lauer
     
  • This header file exists only for some hacks to adapt alsa-driver
    tree. It's useless for building in the kernel. Let's move a few
    lines in it to sound/core.h and remove it.
    With this patch, sound/driver.h isn't removed but has just a single
    compile warning to include it. This should be really killed in
    future.

    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Takashi Iwai
     

16 Oct, 2007

2 commits


09 Feb, 2007

1 commit


20 Dec, 2006

1 commit

  • Fix IRQ flags for PCI devices.
    The shared IRQs for PCI devices shouldn't be allocated with
    IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't
    be used.
    The patch removes unnecessary cast in request_irq and free_irq,
    too.

    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Takashi Iwai
     

22 Oct, 2006

1 commit

  • - Check the return value of pci_enable_device() and request_irq()
    in the suspend. If any error occurs there, disable the device
    using snd_card_disconnect().
    - Call pci_set_power_state() properly with pci_choose_state().
    - Fix the order to call pci_set_power_state().
    - Removed obsolete house-made PM codes in some drivers.

    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Takashi Iwai
     

05 Oct, 2006

1 commit

  • Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
    of passing regs around manually through all ~1800 interrupt handlers in the
    Linux kernel.

    The regs pointer is used in few places, but it potentially costs both stack
    space and code to pass it around. On the FRV arch, removing the regs parameter
    from all the genirq function results in a 20% speed up of the IRQ exit path
    (ie: from leaving timer_interrupt() to leaving do_IRQ()).

    Where appropriate, an arch may override the generic storage facility and do
    something different with the variable. On FRV, for instance, the address is
    maintained in GR28 at all times inside the kernel as part of general exception
    handling.

    Having looked over the code, it appears that the parameter may be handed down
    through up to twenty or so layers of functions. Consider a USB character
    device attached to a USB hub, attached to a USB controller that posts its
    interrupts through a cascaded auxiliary interrupt controller. A character
    device driver may want to pass regs to the sysrq handler through the input
    layer which adds another few layers of parameter passing.

    I've build this code with allyesconfig for x86_64 and i386. I've runtested the
    main part of the code on FRV and i386, though I can't test most of the drivers.
    I've also done partial conversion for powerpc and MIPS - these at least compile
    with minimal configurations.

    This will affect all archs. Mostly the changes should be relatively easy.
    Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

    struct pt_regs *old_regs = set_irq_regs(regs);

    And put the old one back at the end:

    set_irq_regs(old_regs);

    Don't pass regs through to generic_handle_irq() or __do_IRQ().

    In timer_interrupt(), this sort of change will be necessary:

    - update_process_times(user_mode(regs));
    - profile_tick(CPU_PROFILING, regs);
    + update_process_times(user_mode(get_irq_regs()));
    + profile_tick(CPU_PROFILING);

    I'd like to move update_process_times()'s use of get_irq_regs() into itself,
    except that i386, alone of the archs, uses something other than user_mode().

    Some notes on the interrupt handling in the drivers:

    (*) input_dev() is now gone entirely. The regs pointer is no longer stored in
    the input_dev struct.

    (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
    something different depending on whether it's been supplied with a regs
    pointer or not.

    (*) Various IRQ handler function pointers have been moved to type
    irq_handler_t.

    Signed-Off-By: David Howells
    (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

    David Howells
     

23 Sep, 2006

2 commits


13 Jul, 2006

1 commit


03 Jul, 2006

1 commit


23 Jun, 2006

1 commit


28 Apr, 2006

1 commit


29 Mar, 2006

1 commit


03 Jan, 2006

3 commits


11 Nov, 2005

1 commit


04 Nov, 2005

3 commits


12 Sep, 2005

3 commits

  • AD1889 driver,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver
    AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver
    ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver
    Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver
    RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver
    ALI5451 driver,au88x0 driver,CS46xx driver,EMU10K1/EMU10K2 driver
    HDA Intel driver,ICE1712 driver,ICE1724 driver,KORG1212 driver
    MIXART driver,NM256 driver,RME HDSP driver,RME9652 driver
    Trident driver,Digigram VX222 driver,YMFPCI driver
    Set the module owner field in each driver's struct pci_driver to get
    the driver symlink in the sysfs device directory.

    Signed-off-by: Clemens Ladisch

    Clemens Ladisch
     
  • AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver
    BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver
    ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver
    Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver
    VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver
    CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver
    HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
    KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver
    Replace kcalloc(1,..) with kzalloc().

    Signed-off-by: Takashi Iwai

    Takashi Iwai
     
  • CS46xx driver,EMU10K1/EMU10K2 driver,PCM Midlevel,Trident driver
    YMFPCI driver,BT87x driver,CMIPCI driver,CS4281 driver
    ENS1370/1+ driver,ES1938 driver,ES1968 driver,Intel8x0 driver
    Intel8x0-modem driver,Maestro3 driver,RME32 driver,RME96 driver
    SonicVibes driver,VIA82xx driver,ALI5451 driver,ICE1712 driver
    ICE1724 driver,NM256 driver,RME HDSP driver,RME9652 driver
    Remove superfluous PCI ID definitions.

    Signed-off-by: Takashi Iwai

    Takashi Iwai
     

29 May, 2005

1 commit

  • Documentation,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver
    AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver
    ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver
    Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver
    RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver
    ALI5451 driver,au88x0 driver,CA0106 driver,CS46xx driver
    EMU10K1/EMU10K2 driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
    KORG1212 driver,MIXART driver,NM256 driver,RME HDSP driver
    RME9652 driver,Trident driver,Digigram VX222 driver,YMFPCI driver
    Replace the obsolete pci_module_init() with pci_register_driver().

    Signed-off-by: Takashi Iwai

    Takashi Iwai
     

17 Apr, 2005

1 commit

  • Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds