Eric Lee / smarc-fsl-linux-kernel

22 Nov, 2011

1 commit

  • 3b9abc7e4   Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty ... Browse Code »

    * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
    TTY: ldisc, wait for ldisc infinitely in hangup
    TTY: ldisc, move wait idle to caller
    TTY: ldisc, allow waiting for ldisc arbitrarily long
    Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs"
    RS485: fix inconsistencies in the meaning of some variables
    pch_uart: Fix DMA resource leak issue
    serial,mfd: Fix CMSPAR setup
    tty/serial: Prevent drop of DCD on suspend for Tegra UARTs
    pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
    pch_uart: Support new device LAPIS Semiconductor ML7831 IOH
    pch_uart: Fix hw-flow control issue
    tty: hvc_dcc: Fix duplicate character inputs
    jsm: Change maintainership

    Linus Torvalds
     

16 Nov, 2011

8 commits

  • 6edf0c9b1   Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs" ... Browse Code »

    This reverts commit 9636b755da7b498094bdf15b4ce9f6fd16995e4e.

    It wasn't supposed to be applied, thanks to Doug for letting me know.

    Cc: Doug Anderson
    Signed-off-by: Greg Kroah-Hartman

    Greg Kroah-Hartman
     
  • 93f3350c4   RS485: fix inconsistencies in the meaning of some variables ... Browse Code »

    The crisv10.c and the atmel_serial.c serial drivers intepret the fields of the
    serial_rs485 structure in a different way.

    In particular, crisv10.c uses SER_RS485_RTS_AFTER_SEND and
    SER_RS485_RTS_ON_SEND for the voltage of the RTS pin; atmel_serial.c,
    instead, uses these values to know if a delay must be set before and
    after sending. This patch makes the usage of these variables consistent
    across all drivers and fixes the Documentation as well.

    From now on, SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND will be
    used to set the voltage of the RTS pin (as in the crisv10.c driver); the
    delay will be understood by looking only at the value of
    delay_rts_before_send and delay_rts_after_send.

    Signed-off-by: Claudio Scordino
    Signed-off-by: Darron Black
    Acked-by: Jesper Nilsson
    Acked-by: Nicolas Ferre
    Acked-by: Alan Cox
    Signed-off-by: Greg Kroah-Hartman

    Claudio Scordino
     
  • 90f04c292   pch_uart: Fix DMA resource leak issue ... Browse Code »
    1

    Changing UART mode PIO->DMA->PIO->DMA like below, pch_uart driver can't get
    DMA channel resource.

    setserial /dev/ttyPCH0 ^low_latency
    setserial /dev/ttyPCH0 low_latency

    CAUSE:
    Changing mode using setserial command, ".startup" function which gets DMA
    channel is called before ".verify_port" function which sets
    dma-flag(use_dma/use_dma_flag) as 1.

    PIO->DMA
    .startup: Since dma-flag is 0, DMA channel is not requested.
    .verify_port: dma-flag is set as 1.
    .shutdown: N/A

    DMA->PIO
    .startup: Since dma-flag is 1, DMA channel is requested.
    .verify_port: dma-flag is set as 0.
    .shutdown: Since dma-flag is 0, DMA channel is not released.

    This means DMA channel resource leak occurs.
    Next time, this driver can't get DMA channel resource forever.

    MODIFICATION:
    Currently, when release DMA channel resource, this driver checks dma-flag.
    However, this specification occurs the above issue.
    This driver must check whether dma_request_channel is executed or not.
    The values are saved in private data variable "chan_tx/chan_tx".
    These variables mean if the value is NULL, DMA channel is not requested,
    if not NULL, DMA channel is requested.

    This patch fixes the issue.

    Signed-off-by: Tomoya MORINAGA
    Acked-by: Alan Cox
    Cc: stable
    Signed-off-by: Greg Kroah-Hartman

    Tomoya MORINAGA
     
  • 604fdb750   serial,mfd: Fix CMSPAR setup ... Browse Code »

    This is referenced the wrong way. Mika Westerberg added some checks to the
    tty to support multiple console, but the real problem is simply referencing the
    termios object via the wrong path.

    Signed-off-by: Alan Cox
    Signed-off-by: Greg Kroah-Hartman

    Alan Cox
     
  • 9636b755d   tty/serial: Prevent drop of DCD on suspend for Tegra UARTs ... Browse Code »

    On Tegra UARTs (except UART1), the DTR / DCD / DSR lines are not
    externally accessible. Instead, the DTR line internally appears to be
    looped back to be the input to the DCD and DSR lines. The net effect
    of this is that when we drop DTR (like when we suspend), we'll see DCD
    drop too. ...and when we see DCD drop, we treat that as a hangup.

    In order to prevent this hangup from occurring at every sleep, we need
    to force DTR to remain high on Tegra UARTs.

    This patch uses the mcr_mask / mcr_force fields, which were originally
    added for the kludge ALPHA_KLUDGE_MCR. Using these fields does not
    prevent us from removing ALPHA_KLUDGE_MCR--we can just remove the "if"
    tests I have added and always init mcr_mask / mcr_force from the
    serial8250_config.

    NOTE: If we have people that are using UARTA on a Tegra and need to
    control DTR, we'll need to either add a separate port type for UARTA
    or we'll need to add some tegra-specific code to detect whether the
    DTR needs to be left high.

    Signed-off-by: Doug Anderson
    Signed-off-by: Greg Kroah-Hartman

    Doug Anderson
     
  • eca9dfa84   pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor ... Browse Code »

    On October 1 in 2011,
    OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd.

    Signed-off-by: Tomoya MORINAGA
    Signed-off-by: Greg Kroah-Hartman

    Tomoya MORINAGA
     
  • 8249f743f   pch_uart: Support new device LAPIS Semiconductor ML7831 IOH ... Browse Code »
    1

    ML7831 is companion chip for Intel Atom E6xx series.

    Signed-off-by: Tomoya MORINAGA
    Acked-by: Alan Cox
    Cc: stable
    Signed-off-by: Greg Kroah-Hartman

    Tomoya MORINAGA
     
  • a1d7cfe29   pch_uart: Fix hw-flow control issue ... Browse Code »
    1

    Using hardware flow control,
    currently, register of the control-bit(AFE) is not set.
    This patch fixes the issue.

    Signed-off-by: Tomoya MORINAGA
    Acked-by: Alan Cox
    Cc: stable
    Signed-off-by: Greg Kroah-Hartman

    Tomoya MORINAGA
     

11 Nov, 2011

1 commit

07 Nov, 2011

2 commits

  • 32aaeffbd   Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux ... Browse Code »

    * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
    Revert "tracing: Include module.h in define_trace.h"
    irq: don't put module.h into irq.h for tracking irqgen modules.
    bluetooth: macroize two small inlines to avoid module.h
    ip_vs.h: fix implicit use of module_get/module_put from module.h
    nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
    include: replace linux/module.h with "struct module" wherever possible
    include: convert various register fcns to macros to avoid include chaining
    crypto.h: remove unused crypto_tfm_alg_modname() inline
    uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
    pm_runtime.h: explicitly requires notifier.h
    linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
    miscdevice.h: fix up implicit use of lists and types
    stop_machine.h: fix implicit use of smp.h for smp_processor_id
    of: fix implicit use of errno.h in include/linux/of.h
    of_platform.h: delete needless include
    acpi: remove module.h include from platform/aclinux.h
    miscdevice.h: delete unnecessary inclusion of module.h
    device_cgroup.h: delete needless include
    net: sch_generic remove redundant use of
    net: inet_timewait_sock doesnt need
    ...

    Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
    - drivers/media/dvb/frontends/dibx000_common.c
    - drivers/media/video/{mt9m111.c,ov6650.c}
    - drivers/mfd/ab3550-core.c
    - include/linux/dmaengine.h

    Linus Torvalds
     
  • 1197ab294   Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc ... Browse Code »

    * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
    powerpc/p3060qds: Add support for P3060QDS board
    powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
    powerpc/85xx: Make kexec to interate over online cpus
    powerpc/fsl_booke: Fix comment in head_fsl_booke.S
    powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
    powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
    powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
    powerpc/86xx: Correct Gianfar support for GE boards
    powerpc/cpm: Clear muram before it is in use.
    drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
    powerpc/fsl_msi: add support for "msi-address-64" property
    powerpc/85xx: Setup secondary cores PIR with hard SMP id
    powerpc/fsl-booke: Fix settlbcam for 64-bit
    powerpc/85xx: Adding DCSR node to dtsi device trees
    powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
    powerpc/85xx: fix PHYS_64BIT selection for P1022DS
    powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
    powerpc: respect mem= setting for early memory limit setup
    powerpc: Update corenet64_smp_defconfig
    powerpc: Update mpc85xx/corenet 32-bit defconfigs
    ...

    Fix up trivial conflicts in:
    - arch/powerpc/configs/40x/hcu4_defconfig
    removed stale file, edited elsewhere
    - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
    added opal and gelic drivers vs added ePAPR driver
    - drivers/tty/serial/8250.c
    moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support

    Linus Torvalds
     

05 Nov, 2011

1 commit

  • fba956992   Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma ... Browse Code »

    * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits)
    dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle
    dmaengine/ep93xx_dma: add module.h include
    pch_dma: Reduce wasting memory
    pch_dma: Fix suspend issue
    dma/timberdale: free_irq() on an error path
    dma: shdma: transfer based runtime PM
    dmaengine: shdma: protect against the IRQ handler
    dmaengine i.MX DMA/SDMA: add missing include of linux/module.h
    dmaengine: delete redundant chan_id and chancnt initialization in dma drivers
    dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool
    dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers
    serial: sh-sci: don't filter on DMA device, use only channel ID
    ARM: SAMSUNG: Remove Samsung specific enum type for dma direction
    ASoC: Samsung: Update DMA interface
    spi/s3c64xx: Merge dma control code
    spi/s3c64xx: Add support DMA engine API
    ARM: SAMSUNG: Remove S3C-PL330-DMA driver
    ARM: S5P64X0: Use generic DMA PL330 driver
    ARM: S5PC100: Use generic DMA PL330 driver
    ARM: S5PV210: Use generic DMA PL330 driver
    ...

    Fix up fairly trivial conflicts in
    - arch/arm/mach-exynos4/{Kconfig,clock.c}
    - arch/arm/mach-s5p64x0/dma.c

    Linus Torvalds
     

04 Nov, 2011

1 commit

  • 3af1f8a41   serial: sh-sci: Fix up SH-2A SCIF support. ... Browse Code »

    This fixes up support for SH-2(A) SCIFs by introducing a new regtype. As
    expected, it's close to the SH-4A SCIF with fifodata, but still different
    enough to warrant its own type.

    Fixes up a number of FIFO overflows and similar for both SH7203/SH7264.

    Signed-off-by: Phil Edworthy
    Tested-by: Federico Fuga
    Signed-off-by: Paul Mundt

    Phil Edworthy
     

02 Nov, 2011

1 commit

  • 367069f16   Merge branch 'next/dt' of git://git.linaro.org/people/arnd/arm-soc ... Browse Code »

    * 'next/dt' of git://git.linaro.org/people/arnd/arm-soc:
    ARM: gic: use module.h instead of export.h
    ARM: gic: fix irq_alloc_descs handling for sparse irq
    ARM: gic: add OF based initialization
    ARM: gic: add irq_domain support
    irq: support domains with non-zero hwirq base
    of/irq: introduce of_irq_init
    ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support
    ARM: at91: dt: at91sam9g45 family and board device tree files
    arm/mx5: add device tree support for imx51 babbage
    arm/mx5: add device tree support for imx53 boards
    ARM: msm: Add devicetree support for msm8660-surf
    msm_serial: Add devicetree support
    msm_serial: Use relative resources for iomem

    Fix up conflicts in arch/arm/mach-at91/{at91sam9260.c,at91sam9g45.c}

    Linus Torvalds
     

01 Nov, 2011

2 commits

31 Oct, 2011

1 commit

29 Oct, 2011

1 commit

  • 18c063536   Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6 ... Browse Code »

    * 'spi/next' of git://git.secretlab.ca/git/linux-2.6:
    drivercore: Add helper macro for platform_driver boilerplate
    spi: irq: Remove IRQF_DISABLED
    OMAP: SPI: Fix the trying to free nonexistent resource error
    spi/spi-ep93xx: add module.h include
    spi/tegra: fix compilation error in spi-tegra.c
    spi: spi-dw: fix all sparse warnings
    spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true
    spi/spi-pl022: calculate_effective_freq() must set rate t allocate more sg than required.
    spi/spi-pl022: Use GFP_ATOMIC for allocation from tasklet
    spi/spi-pl022: Resolve formatting issues

    Linus Torvalds
     

27 Oct, 2011

3 commits

  • 18974369c   Merge branch 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm ... Browse Code »

    * 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
    ARM: 7131/1: clkdev: Add Common Macro for clk_lookup
    clk: spi-pl022: convert to clk_prepare()/clk_unprepare()
    clk: timer-sp: convert to clk_prepare()/clk_unprepare()
    clk: sa1111: convert to clk_prepare()/clk_unprepare()
    clk: mmci: convert to clk_prepare()/clk_unprepare()
    clk: amba-pl011: convert to clk_prepare()/clk_unprepare()
    clk: amba-pl010: convert to clk_prepare()/clk_unprepare()
    clk: amba-clcd: convert to clk_prepare()/clk_unprepare()
    clk: amba bus: convert to clk_prepare()/clk_unprepare()
    clk: provide prepare/unprepare functions

    Linus Torvalds
     
  • ca9066628   Merge branch 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm ... Browse Code »

    * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits)
    ARM: 7135/1: ep93xx: bring back missing
    ARM: 7104/1: plat-pxa: break out GPIO driver specifics
    ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem
    ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics
    ARM: 7101/1: arm/tegra: Replace with
    ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h
    ARM: 7083/1: rewrite U300 GPIO to use gpiolib
    ARM: 7074/1: gpio: davinci: eliminate unused variable warnings
    ARM: 7063/1: Orion: gpio: add missing include of linux/types.h
    ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build
    ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio
    ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq
    ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio
    ARM: 7057/1: mach-pnx4008: rename GPIO header
    ARM: 7056/1: plat-nomadik: kill off
    ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function
    ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem
    ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics
    ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem
    ARM: 7043/1: mach-ixp2000: rename GPIO header
    ...

    Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually

    Linus Torvalds
     
  • 5fffb9513   Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6 ... Browse Code »

    * 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6:
    of_mdio: Don't phy_scan_fixups() twice
    Devicetree: Expand on ARM Primecell binding documentation
    dt: Add empty of_match_node() macro
    dt: add empty dt helpers for non-dt build
    devicetree: fix build error on drivers/tty/serial/altera_jtaguart.c
    devicetree: Add ARM pl022 spi controller binding doc
    devicetree: Add ARM pl061 gpio controller binding doc
    of/irq: of_irq_find_parent: check for parent equal to child
    MAINTAINERS: update devicetree maintainers
    dt: add helper to read 64-bit integers
    tty: use of_match_ptr() for of_match_table entry
    OF: Add of_match_ptr() macro
    dt: add empty for_each_child_of_node, of_find_property
    devicetree: Document Qualcomm and Atmel prefixes
    serial/imx: add of_alias_get_id() reference back
    dt: add of_alias_scan and of_alias_get_id
    devicetree: Add a registry of vendor prefixes

    Linus Torvalds
     

26 Oct, 2011

1 commit

  • efb8d21b2   Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty ... Browse Code »

    * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
    TTY: serial_core: Fix crash if DCD drop during suspend
    tty/serial: atmel_serial: bootconsole removed from auto-enumerates
    Revert "TTY: call tty_driver_lookup_tty unconditionally"
    tty/serial: atmel_serial: add device tree support
    tty/serial: atmel_serial: auto-enumerate ports
    tty/serial: atmel_serial: whitespace and braces modifications
    tty/serial: atmel_serial: change platform_data variable name
    tty/serial: RS485 bindings for device tree
    TTY: call tty_driver_lookup_tty unconditionally
    TTY: pty, release tty in all ptmx_open fail paths
    TTY: make tty_add_file non-failing
    TTY: drop driver reference in tty_open fail path
    8250_pci: Fix kernel panic when pch_uart is disabled
    h8300: drivers/serial/Kconfig was moved
    parport_pc: release IO region properly if unsupported ITE887x card is found
    tty: Support compat_ioctl get/set termios_locked
    hvc_console: display printk messages on console.
    TTY: snyclinkmp: forever loop in tx_load_dma_buffer()
    tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output
    tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case)
    ...

    Fix up Conflicts in:
    - drivers/tty/serial/8250_pci.c
    Trivial conflict with removed duplicate device ID
    - drivers/tty/serial/atmel_serial.c
    Annoying silly conflict between "specify the port num via
    platform_data" and other changes to atmel_console_init

    Linus Torvalds
     

25 Oct, 2011

2 commits

  • 59e525341   Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial ... Browse Code »

    * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits)
    MAINTAINERS: linux-m32r is moderated for non-subscribers
    linux@lists.openrisc.net is moderated for non-subscribers
    Drop default from "DM365 codec select" choice
    parisc: Kconfig: cleanup Kernel page size default
    Kconfig: remove redundant CONFIG_ prefix on two symbols
    cris: remove arch/cris/arch-v32/lib/nand_init.S
    microblaze: add missing CONFIG_ prefixes
    h8300: drop puzzling Kconfig dependencies
    MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers
    tty: drop superfluous dependency in Kconfig
    ARM: mxc: fix Kconfig typo 'i.MX51'
    Fix file references in Kconfig files
    aic7xxx: fix Kconfig references to READMEs
    Fix file references in drivers/ide/
    thinkpad_acpi: Fix printk typo 'bluestooth'
    bcmring: drop commented out line in Kconfig
    btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888'
    doc: raw1394: Trivial typo fix
    CIFS: Don't free volume_info->UNC until we are entirely done with it.
    treewide: Correct spelling of successfully in comments
    ...

    Linus Torvalds
     
  • 940ab8896   drivercore: Add helper macro for platform_driver boilerplate ... Browse Code »

    For simple modules that contain a single platform_driver without any
    additional setup code then ends up being a block of duplicated
    boilerplate. This patch adds a new macro, module_platform_driver(),
    which replaces the module_init()/module_exit() registrations with
    template functions.

    Signed-off-by: Grant Likely
    Acked-by: Greg Kroah-Hartman
    Reviewed-by: Magnus Damm
    Reviewed-by: Mark Brown
    Reviewed-by: Stephen Boyd

    Grant Likely
     

24 Oct, 2011

1 commit

20 Oct, 2011

1 commit

  • d208a3bf7   TTY: serial_core: Fix crash if DCD drop during suspend ... Browse Code »

    This crash was showing up 100% of the time on Tegra CPUs when an
    agetty was running on the serial port and the console was not running
    on the serial port. The reason the Tegra saw it so reliably is that
    the Tegra CPU internally ties DTR to DCD/DSR. That means when we
    dropped DTR during suspend we would get always get an immediate DCD
    drop.

    The specific order of operations that were running:
    * uart_suspend_port() would be called to put the uart in suspend mode
    * we'd drop DTR (ops->set_mctrl(uport, 0)).
    * the DTR drop would be looped back in the CPU to be a DCD drop.
    * the DCD drop would look to the serial driver as a hangup
    * the hangup would call uart_shutdown()
    * ... suspend / resume happens ...
    * uart_resume_port() would be called and run the code in the
    (port->flags & ASYNC_SUSPENDED) block, which would startup the port
    (and enable tx again).
    * Since the UART would be available for tx, we'd immediately get
    an interrupt, eventually calling transmit_chars()
    * The transmit_chars() function would crash. The first crash would
    be a dereference of a NULL tty member, but since the port has been
    shutdown that was just a symptom.

    I have proposed a patch that would fix the Tegra CPUs here (see
    https://lkml.org/lkml/2011/10/11/444 - tty/serial: Prevent drop of DCD
    on suspend for Tegra UARTs). However, even with that fix it is still
    possible for systems that have an externally visible DCD line to see a
    crash if the DCD drops at just the right time during suspend: thus
    this patch is still useful.

    Signed-off-by: Doug Anderson
    Acked-by: Alan Cox
    Signed-off-by: Greg Kroah-Hartman

    Doug Anderson
     

19 Oct, 2011

6 commits

10 Oct, 2011

1 commit

  • a24d025a0   Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus ... Browse Code »

    * 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (29 commits)
    MIPS: Call oops_enter, oops_exit in die
    staging/octeon: Software should check the checksum of no tcp/udp packets
    MIPS: Octeon: Enable C0_UserLocal probing.
    MIPS: No branches in delay slots for huge pages in handle_tlbl
    MIPS: Don't clobber CP0_STATUS value for CONFIG_MIPS_MT_SMTC
    MIPS: Octeon: Select CONFIG_HOLES_IN_ZONE
    MIPS: PM: Use struct syscore_ops instead of sysdevs for PM (v2)
    MIPS: Compat: Use 32-bit wrapper for compat_sys_futex.
    MIPS: Do not use EXTRA_CFLAGS
    MIPS: Alchemy: DB1200: Disable cascade IRQ in handler
    SERIAL: Lantiq: Set timeout in uart_port
    MIPS: Lantiq: Fix setting the PCI bus speed on AR9
    MIPS: Lantiq: Fix external interrupt sources
    MIPS: tlbex: Fix build error in R3000 code.
    MIPS: Alchemy: Include Au1100 in PM code.
    MIPS: Alchemy: Fix typo in MAC0 registration
    MIPS: MSP71xx: Fix build error.
    MIPS: Handle __put_user() sleeping.
    MIPS: Allow forced irq threading
    MIPS: i8259: Mark cascade interrupt non-threaded
    ...

    Linus Torvalds
     

06 Oct, 2011

2 commits

30 Sep, 2011

1 commit

27 Sep, 2011

3 commits