29 Nov, 2020
1 commit
-
…masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove unused OBJSIZE variable.
- Fix rootless deb-pkg build in a setgid directory.
* tag 'kbuild-fixes-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
builddeb: Fix rootless build in setuid/setgid directory
kbuild: remove unused OBJSIZE
13 Nov, 2020
1 commit
-
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for
ENETCCurrent release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- fix out-of-order UDP packets when forwarding with UDP GSO fraglists
turned on:
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter
rules"* tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
lan743x: fix use of uninitialized variable
net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO
net: udp: fix UDP header access on Fast/frag0 UDP GRO
devlink: Avoid overwriting port attributes of registered port
vrf: Fix fast path output packet handling with async Netfilter rules
cosa: Add missing kfree in error path of cosa_write
net: switch to the kernel.org patchwork instance
ch_ktls: stop the txq if reaches threshold
ch_ktls: tcb update fails sometimes
ch_ktls/cxgb4: handle partial tag alone SKBs
ch_ktls: don't free skb before sending FIN
ch_ktls: packet handling prior to start marker
ch_ktls: Correction in middle record handling
ch_ktls: missing handling of header alone
ch_ktls: Correction in trimmed_len calculation
cxgb4/ch_ktls: creating skbs causes panic
ch_ktls: Update cheksum information
ch_ktls: Correction in finding correct length
cxgb4/ch_ktls: decrypted bit is not enough
net/x25: Fix null-ptr-deref in x25_connect
...
09 Nov, 2020
1 commit
-
Pull driver core documentation fixes from Greg KH:
"Some small Documentation fixes that were fallout from the larger
documentation update we did in 5.10-rc2.Nothing major here at all, but all of these have been in linux-next
and resolve build warnings when building the documentation files"* tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: remove mic/index from misc-devices/index.rst
scripts: get_api.pl: Add sub-titles to ABI output
scripts: get_abi.pl: Don't let ABI files to create subtitles
docs: leds: index.rst: add a missing file
docs: ABI: sysfs-class-net: fix a typo
docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys
07 Nov, 2020
1 commit
-
Alexei Starovoitov says:
====================
pull-request: bpf 2020-11-061) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David.
2) Tighten bpf_lsm function check, from KP.
3) Fix bpftool attaching to flow dissector, from Lorenz.
4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard.
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Update verification logic for LSM programs
bpf: Zero-fill re-used per-cpu map element
bpf: BPF_PRELOAD depends on BPF_SYSCALL
tools/bpftool: Fix attaching flow dissector
libbpf: Fix possible use after free in xsk_socket__delete
libbpf: Fix null dereference in xsk_socket__delete
libbpf, hashmap: Fix undefined behavior in hash_bits
bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
tools, bpftool: Remove two unused variables.
tools, bpftool: Avoid array index warnings.
xsk: Fix possible memory leak at socket close
bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs
samples/bpf: Set rlimit for memlock to infinity in all samples
bpf: Fix -Wshadow warnings
selftest/bpf: Fix profiler test using CO-RE relocation for enums
====================Link: https://lore.kernel.org/r/20201106221759.24143-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski
04 Nov, 2020
2 commits
-
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
... -
Pull documentation fixes from Jonathan Corbet:
"A small number of fixes, plus a build tweak to respect the desire for
silence in V=0 builds"* tag 'docs-5.10-3' of git://git.lwn.net/linux:
docs: fix automarkup regression on Python 2
documentation: arm: sunxi: add Allwinner H6 documents
scripts: kernel-doc: split typedef complex regex
scripts: kernel-doc: fix typedef parsing
docs: Makefile: honor V=0 for docs building
02 Nov, 2020
3 commits
-
Instead of adding titles just for the files, add titles
for each part of the ABI output, in order to make easier
to search for a symbol there.Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/64752a5de06ab8263c296e3ed01414b25861e1eb.1604312590.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
The ReST output should only contain documentation titles
automatically created by the script.There are two reasons for that:
1) Consistency.
just a handful ABI docs define titles
2) To avoid critical errors.
Docutils (which is the basis for Sphinx) allows a free
assign of documentation title markups. So, one document
could be doing things like:Level 1
=======Level 2
-------While another one could do the reverse:
Level 1
-------Level 2
=======But the same document can't mix.
As the output of get_abi.pl will join contents from multiple
files, if they don't define the levels on a consistent errors,
errors like this can happen:Sphinx parallel build error:
docutils.utils.SystemMessage: /home/rdunlap/lnx/lnx-510-rc2/Documentation/ABI/testing/sysfs-bus-rapidio:2: (SEVERE/4) Title level inconsistent:Attributes Common for All RapidIO Devices
-----------------------------------------Which cause some versions of Sphinx to go into an endless
loop.It should be noticed that an alternative to that would
be to replace all title occurrences by a single markup,
but that will make the parser more complex, and, due to
(1) it would generate an inconsistent output.So, better to just remove the titles defined at the ABI
files from the output.Reported-by: Randy Dunlap
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/6c62ef5c01d39dee8d891f8390c816d2a889670a.1604312590.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
Building 5.10-rc1 in a setgid directory failed with the following
error:dpkg-deb: error: control directory has bad permissions 2755 (must be
>=0755 and
Signed-off-by: Sven Joachim
Signed-off-by: Masahiro Yamada
30 Oct, 2020
13 commits
-
All ABI files are now compatible with ReST format. So, change
the script default to assume that the ABI source files
are compatible with ReST.Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/4b0af257010570e0e917d82498e42992bec5e173.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
There are some ABI documents that, while they don't generate
any warnings, they have issues when parsed by get_abi.pl script
on its output result.Address them, in order to provide a clean output.
Reviewed-by: Tom Rix # for fpga-manager
Reviewed-By: Kajol Jain # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7
Acked-by: Jonathan Cameron #for IIO
Acked-by: Oded Gabbay # for Habanalabs
Acked-by: Vaibhav Jain # for sysfs-bus-papr-pmem
Acked-by: Cezary Rojewski # for catpt
Acked-by: Suzuki K Poulose
Acked-by: Ilya Dryomov # for rbd
Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
The files under Documentation/ABI should follow the syntax
as defined at Documentation/ABI/README.Allow checking if they're following the syntax by running
the ABI parser script on COMPILE_TEST.With that, when there's a problem with a file under
Documentation/ABI, it would produce a warning like:Warning: file ./Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats#14:
What '/sys/bus/pci/devices//aer_stats/aer_rootport_total_err_cor' doesn't have a description
Warning: file ./Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats#21:
What '/sys/bus/pci/devices//aer_stats/aer_rootport_total_err_fatal' doesn't have a descriptionAcked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/57a38de85cb4b548857207cf1fc1bf1ee08613c9.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
There are several cross-references that can be automatically
generated:- References to .rst files inside Documentation/
- References to other ABI files;
- References to ABI symbols at /sys/*.Add a logic to automatically parse them and convert into
cross references.Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/abe756d4f94fb6ffcc3dd3902a766c7c3990ea89.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
As we're using tables, let's distinguish the ones used by ABI
by using a bold font.Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/9ed645c2519169817379c1df5b8cf03828e92520.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
The same filename may exist on multiple directories within
ABI. Create separate entries at the internal database for
each of them.Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/ef760f68f54e132c4be52f0027189b4ba31554ec.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
Right now, the script only outputs Users on search. Print it
also in ReST format.Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/83def2a692c4c678f21ee6e76b66a54d2be1e796.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
The ABI should define only once each What. The current script
logic assumes that.However, that's not the case, currently: there are several
symbols with a generic definition, and per-driver ones.Better handle such cases, by preserving the cross-references
with the files that define them, but also track such
cases, producing warnings, as they should be fixed.Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/d7a73b8b3aae5b2bff9279996ff9ca4cdfc89196.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
Right now, the cross-references are generated on a single
step, when doing ReST output.While this is nice optimization, it prevents auto-creating
cross-references for ABI symbols.So, split it into a separate logic.
While here, turn on Perl warnings, as it helps to debug
problems inside the script.Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/dbc97c8c2dfd877921f058134c35b2a8b1f8414b.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
The original parser for indentation were relying on having
just one description for each "what". However, that's not
the case: there are a number of ABI symbols that got defined
multiple times.Improve the parser for it to better handle descriptions
if entries are duplicated.Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/eb458bb30be0e5a89192d6057b2e8a7e910dbcb8.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
The get_abi.pl reads a lot of files and can join them on a
single output file. Store where each "What:" output came from,
in order to be able to optionally display it.This is useful for the Sphinx extension, with can now be
able to blame what ABI file has issues, and on what line
the What: description with problems begin.Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/befc387011c5e3c6febd285b7f27610e41c90260.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
When the source ABI file is using ReST notation, the script
should handle whitespaces and lines with care, as otherwise
the file won't be properly recognized.Address the bugs that are on such part of the script.
Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/5c22c54fbd0cda797b691d52c568be6d0d1079d8.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman -
Right now, several ABI files won't parse as ReST, as they
contain severe violations to the spec, with makes the script
to crash.So, the code has a sanity logic with escapes bad code and
cleans tags that can cause Sphinx to crash.Add support for disabling this mode.
Right now, as enabling rst-mode causes crash, it is disabled
by default.Acked-by: Jonathan Corbet
Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/34b691e3002e8987c24d851fe37640f95e506a92.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman
29 Oct, 2020
4 commits
-
Forward-declare struct bpf_redir_neigh in bpf_helper_defs.h to avoid
compiler warning about unknown structs.Fixes: ba452c9e996d ("bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop")
Signed-off-by: Andrii Nakryiko
Signed-off-by: Daniel Borkmann
Acked-by: Toke Høiland-Jørgensen
Link: https://lore.kernel.org/bpf/20201028181204.111241-1-andrii@kernel.org -
Sphinx C domain code after 3.2.1 will start complaning if :c:struct
would be used for an union type:.../Documentation/gpu/drm-kms-helpers:352: ../drivers/video/hdmi.c:851: WARNING: C 'identifier' cross-reference uses wrong tag: reference name is 'union hdmi_infoframe' but found name is 'struct hdmi_infoframe'. Full reference name is 'union hdmi_infoframe'. Full found name is 'struct hdmi_infoframe'.
So, let's address this issue too in advance, in order to
avoid future issues.Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/6e4ec3eec914df62389a299797a3880ae4490f35.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet -
The typedef regex for function prototypes are very complex.
Split them into 3 separate regex and then join them using
qr.Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/3a4af999a0d62d4ab9dfae1cdefdfcad93383356.1603792384.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet -
The include/linux/genalloc.h file defined this typedef:
typedef unsigned long (*genpool_algo_t)(unsigned long *map,unsigned long size,unsigned long start,unsigned int nr,void *data, struct gen_pool *pool, unsigned long start_addr);
Because it has a type composite of two words (unsigned long),
the parser gets the typedef name wrong:.. c:macro:: long
**Typedef**: Allocation callback function type definition
Fix the regex in order to accept composite types when
defining a typedef for a function pointer.Signed-off-by: Mauro Carvalho Chehab
Link: https://lore.kernel.org/r/328e8018041cc44f7a1684e57f8d111230761c4f.1603792384.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet
26 Oct, 2020
2 commits
-
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches
Reviewed-by: Nick Desaulniers
Reviewed-by: Miguel Ojeda
Signed-off-by: Linus Torvalds -
If set, use the environment variable GIT_DIR to change the default .git
location of the kernel git tree.If GIT_DIR is unset, keep using the current ".git" default.
Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.com
Signed-off-by: Joe Perches
Tested-by: Geert Uytterhoeven
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
24 Oct, 2020
1 commit
-
Pull networking fixes from Jakub Kicinski:
"Cross-tree/merge window issues:- rtl8150: don't incorrectly assign random MAC addresses; fix late in
the 5.9 cycle started depending on a return code from a function
which changed with the 5.10 PR from the usb subsystemCurrent release regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/availablePrevious release regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu() to
synchronize_rcu_expedited()- netsec: ignore 'phy-mode' device property on ACPI systems; the
property is not populated correctly by the firmware, but firmware
configures the PHY so just keep boot settingsPrevious releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is light
and only wants to schedule napi (and do so through a _irqoff()
variant, preferably)- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it"
* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
tcp: fix to update snd_wl1 in bulk receiver fast path
net: Properly typecast int values to set sk_max_pacing_rate
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
ibmvnic: save changed mac address to adapter->mac_addr
selftests: mptcp: depends on built-in IPv6
Revert "virtio-net: ethtool configurable RXCSUM"
rtnetlink: fix data overflow in rtnl_calcit()
net: ethernet: mtk-star-emac: select REGMAP_MMIO
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
mptcp: depends on IPV6 but not as a module
sfc: move initialisation of efx->filter_sem to efx_init_struct()
mpls: load mpls_gso after mpls_iptunnel
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
net: dsa: bcm_sf2: make const array static, makes object smaller
mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
...
23 Oct, 2020
2 commits
-
Pull Kconfig updates from Masahiro Yamada:
- Remove unused or useless code from qconf
- Allow to edit "int", "hex", "string" options in place, and remove the
separate edit box from qconf* tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: create QApplication after option checks
kconfig: qconf: remove Y, M, N columns
kconfig: qconf: remove ConfigView class
kconfig: qconf: move setShowName/Range() to ConfigList from ConfigView
kconfig: qconf: remove ConfigLineEdit class
kconfig: qconf: allow to edit "int", "hex", "string" menus in-place
kconfig: qconf: show data column all the time
kconfig: qconf: move ConfigView::updateList(All) to ConfigList class
kconfig: qconf: remove unused ConfigItem::okRename()
kconfig: qconf: update the intro message to match to the current code
kconfig: qconf: reformat the intro message -
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
22 Oct, 2020
1 commit
-
Based on the discussion in [0], update the bpf_redirect_neigh() helper to
accept an optional parameter specifying the nexthop information. This makes
it possible to combine bpf_fib_lookup() and bpf_redirect_neigh() without
incurring a duplicate FIB lookup - since the FIB lookup helper will return
the nexthop information even if no neighbour is present, this can simply
be passed on to bpf_redirect_neigh() if bpf_fib_lookup() returns
BPF_FIB_LKUP_RET_NO_NEIGH. Thus fix & extend it before helper API is frozen.[0] https://lore.kernel.org/bpf/393e17fc-d187-3a8d-2f0d-a627c7c63fca@iogearbox.net/
Signed-off-by: Toke Høiland-Jørgensen
Signed-off-by: Daniel Borkmann
Reviewed-by: David Ahern
Link: https://lore.kernel.org/bpf/160322915615.32199.1187570224032024535.stgit@toke.dk
20 Oct, 2020
3 commits
-
`hostname` may not be present on some systems as it's not mandated by
POSIX/SUSv4. This isn't just a theoretical problem: on Arch Linux,
`hostname` is provided by `inetutils`, which isn't part of the base
distribution../scripts/mkcompile_h: line 38: hostname: command not found
Use `uname -n` instead, which is more likely to be available (and
mandated by standards).Signed-off-by: Chris Down
Signed-off-by: Masahiro Yamada -
After commit 43fee2b23895 ("kbuild: do not redirect the first
prerequisite for filechk"), the rule is no longer automatically passed
$< as stdin, so remove the stale comment.Fixes: 43fee2b23895 ("kbuild: do not redirect the first prerequisite for filechk")
Signed-off-by: Rasmus Villemoes
Signed-off-by: Masahiro Yamada -
This change removes all instances of DISABLE_LTO from
Makefiles, as they are currently unused, and the preferred
method of disabling LTO is to filter out the flags instead.Note added by Masahiro Yamada:
DISABLE_LTO was added as preparation for GCC LTO, but GCC LTO was
not pulled into the mainline. (https://lkml.org/lkml/2014/4/8/272)Suggested-by: Kees Cook
Signed-off-by: Sami Tolvanen
Reviewed-by: Kees Cook
Signed-off-by: Masahiro Yamada
19 Oct, 2020
1 commit
-
Pull coccinelle updates from Julia Lawall.
* 'for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
coccinelle: api: add kfree_mismatch script
coccinelle: iterators: Add for_each_child.cocci script
scripts: coccicheck: Change default condition for parallelism
scripts: coccicheck: Add quotes to improve portability
coccinelle: api: kfree_sensitive: print memset position
coccinelle: misc: add flexible_array.cocci script
coccinelle: api: add kvmalloc script
scripts: coccicheck: Change default value for parallelism
coccinelle: misc: add excluded_middle.cocci script
scripts: coccicheck: Improve error feedback when coccicheck fails
coccinelle: api: update kzfree script to kfree_sensitive
coccinelle: misc: add uninitialized_var.cocci script
coccinelle: ifnullfree: add vfree(), kvfree*() functions
coccinelle: api: add kobj_to_dev.cocci script
coccinelle: add patch rule for dma_alloc_coherent
scripts: coccicheck: Add chain mode to list of modes
18 Oct, 2020
1 commit
-
Check that alloc and free types of functions match each other.
Signed-off-by: Denis Efremov
Signed-off-by: Julia Lawall
17 Oct, 2020
3 commits
-
Pull documentation updates from Mauro Carvalho Chehab:
"A series of patches addressing warnings produced by make htmldocs.
This includes:- kernel-doc markup fixes
- ReST fixes
- Updates at the build system in order to support newer versions of
the docs build toolchain (Sphinx)After this series, the number of html build warnings should reduce
significantly, and building with Sphinx 3.1 or later should now be
supported (although it is still recommended to use Sphinx 2.4.4).As agreed with Jon, I should be sending you a late pull request by the
end of the merge window addressing remaining issues with docs build,
as there are a number of warning fixes that depends on pull requests
that should be happening along the merge window.The end goal is to have a clean htmldocs build on Kernel 5.10.
PS. It should be noticed that Sphinx 3.0 is not currently supported,
as it lacks support for C domain namespaces. Such feature, needed in
order to document uAPI system calls with Sphinx 3.x, was added only on
Sphinx 3.1"* tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits)
PM / devfreq: remove a duplicated kernel-doc markup
mm/doc: fix a literal block markup
workqueue: fix a kernel-doc warning
docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup
Input: sparse-keymap: add a description for @sw
rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu
nl80211: docs: add a description for s1g_cap parameter
usb: docs: document altmode register/unregister functions
kunit: test.h: fix a bad kernel-doc markup
drivers: core: fix kernel-doc markup for dev_err_probe()
docs: bio: fix a kerneldoc markup
kunit: test.h: solve kernel-doc warnings
block: bio: fix a warning at the kernel-doc markups
docs: powerpc: syscall64-abi.rst: fix a malformed table
drivers: net: hamradio: fix document location
net: appletalk: Kconfig: Fix docs location
dt-bindings: fix references to files converted to yaml
memblock: get rid of a :c:type leftover
math64.h: kernel-docs: Convert some markups into normal comments
media: uAPI: buffer.rst: remove a left-over documentation
... -
Merge more updates from Andrew Morton:
"155 patches.Subsystems affected by this patch series: mm (dax, debug, thp,
readahead, page-poison, util, memory-hotplug, zram, cleanups), misc,
core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch,
binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan,
romfs, and fault-injection"* emailed patches from Andrew Morton : (155 commits)
lib, uaccess: add failure injection to usercopy functions
lib, include/linux: add usercopy failure capability
ROMFS: support inode blocks calculation
ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang
sched.h: drop in_ubsan field when UBSAN is in trap mode
scripts/gdb/tasks: add headers and improve spacing format
scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command
kernel/relay.c: drop unneeded initialization
panic: dump registers on panic_on_warn
rapidio: fix the missed put_device() for rio_mport_add_riodev
rapidio: fix error handling path
nilfs2: fix some kernel-doc warnings for nilfs2
autofs: harden ioctl table
ramfs: fix nommu mmap with gaps in the page cache
mm: remove the now-unnecessary mmget_still_valid() hack
mm/gup: take mmap_lock in get_dump_page()
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot
coredump: rework elf/elf_fdpic vma_dump_size() into common helper
coredump: refactor page range dumping into common helper
coredump: let dump_emit() bail out on short writes
... -
When the kernel is compiled with Clang, -fsanitize=bounds expands to
-fsanitize=array-bounds and -fsanitize=local-bounds.Enabling -fsanitize=local-bounds with Clang has the unfortunate
side-effect of inserting traps; this goes back to its original intent,
which was as a hardening and not a debugging feature [1]. The same
feature made its way into -fsanitize=bounds, but the traps remained. For
that reason, -fsanitize=bounds was split into 'array-bounds' and
'local-bounds' [2].Since 'local-bounds' doesn't behave like a normal sanitizer, enable it
with Clang only if trapping behaviour was requested by
CONFIG_UBSAN_TRAP=y.Add the UBSAN_BOUNDS_LOCAL config to Kconfig.ubsan to enable the
'local-bounds' option by default when UBSAN_TRAP is enabled.[1] http://lists.llvm.org/pipermail/llvm-dev/2012-May/049972.html
[2] http://lists.llvm.org/pipermail/cfe-commits/Week-of-Mon-20131021/091536.htmlSuggested-by: Marco Elver
Signed-off-by: George Popescu
Signed-off-by: Andrew Morton
Reviewed-by: David Brazdil
Reviewed-by: Marco Elver
Cc: Masahiro Yamada
Cc: Michal Marek
Cc: Nathan Chancellor
Cc: Nick Desaulniers
Cc: Kees Cook
Cc: Dmitry Vyukov
Cc: Arnd Bergmann
Cc: Peter Zijlstra
Link: https://lkml.kernel.org/r/20200922074330.2549523-1-georgepope@google.com
Signed-off-by: Linus Torvalds
