Eric Lee / smarc-fsl-linux-kernel

31 May, 2019

1 commit

  • 2874c5fd2   treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 ... Browse Code »

    Based on 1 normalized pattern(s):

    this program is free software you can redistribute it and or modify
    it under the terms of the gnu general public license as published by
    the free software foundation either version 2 of the license or at
    your option any later version

    extracted by the scancode license scanner the SPDX license identifier

    GPL-2.0-or-later

    has been chosen to replace the boilerplate/reference in 3029 file(s).

    Signed-off-by: Thomas Gleixner
    Reviewed-by: Allison Randal
    Cc: linux-spdx@vger.kernel.org
    Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
    Signed-off-by: Greg Kroah-Hartman

    Thomas Gleixner
     

15 May, 2019

1 commit

07 Nov, 2017

1 commit

03 Nov, 2017

1 commit

  • 41760d0e0   drivers/pcmcia: Convert timers to use timer_setup() ... Browse Code »

    In preparation for unconditionally passing the struct timer_list pointer to
    all timer callbacks, switch to using the new timer_setup() and from_timer()
    to pass the timer pointer explicitly.

    Cc: Florian Fainelli
    Cc: bcm-kernel-feedback-list@broadcom.com
    Cc: David Howells
    Cc: Arnd Bergmann
    Cc: linux-pcmcia@lists.infradead.org
    Cc: linux-arm-kernel@lists.infradead.org
    Signed-off-by: Kees Cook
    Acked-by: Russell King # for soc_common.c

    Kees Cook
     

17 Mar, 2015

1 commit

  • dae6cdabe   pcmcia: Use setup_timer ... Browse Code »

    This patch introduces the use of function setup_timer.

    This is done using Coccinelle and semantic patch used is
    as follows:

    @@
    expression x,y,z;
    @@

    - init_timer (&x);
    + setup_timer (&x, y, z);
    - x.function = y;
    - x.data = z;

    Signed-off-by: Vaishali Thakkar
    Signed-off-by: Greg Kroah-Hartman

    Vaishali Thakkar
     

20 Oct, 2014

1 commit

18 Oct, 2012

1 commit

21 Sep, 2012

1 commit

  • 70c494c31   ARM: OMAP1: Make plat/mux.h omap1 only ... Browse Code »

    We are moving omap2+ to use the device tree based pinctrl-single.c
    and will be removing the old mux framework. This will remove the
    omap1 specific parts from plat-omap.

    Acked-by: Felipe Balbi
    Cc: Grant Likely
    Cc: Alan Stern
    Cc: Greg Kroah-Hartman
    Cc: Richard Purdie
    Cc: Florian Tobias Schandinat
    Cc: Tomi Valkeinen
    Cc: linux-usb@vger.kernel.org
    Cc: linux-pcmcia@lists.infradead.org
    Cc: spi-devel-general@lists.sourceforge.net
    Signed-off-by: Tony Lindgren

    Tony Lindgren
     

10 May, 2010

1 commit

30 Mar, 2010

1 commit

  • 5a0e3ad6a   include cleanup: Update gfp.h and slab.h includes to prepare for breaking implic… ... Browse Code »

    …it slab.h inclusion from percpu.h

    percpu.h is included by sched.h and module.h and thus ends up being
    included when building most .c files. percpu.h includes slab.h which
    in turn includes gfp.h making everything defined by the two files
    universally available and complicating inclusion dependencies.

    percpu.h -> slab.h dependency is about to be removed. Prepare for
    this change by updating users of gfp and slab facilities include those
    headers directly instead of assuming availability. As this conversion
    needs to touch large number of source files, the following script is
    used as the basis of conversion.

    http://userweb.kernel.org/~tj/misc/slabh-sweep.py

    The script does the followings.

    * Scan files for gfp and slab usages and update includes such that
    only the necessary includes are there. ie. if only gfp is used,
    gfp.h, if slab is used, slab.h.

    * When the script inserts a new include, it looks at the include
    blocks and try to put the new include such that its order conforms
    to its surrounding. It's put in the include block which contains
    core kernel includes, in the same order that the rest are ordered -
    alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
    doesn't seem to be any matching order.

    * If the script can't find a place to put a new include (mostly
    because the file doesn't have fitting include block), it prints out
    an error message indicating which .h file needs to be added to the
    file.

    The conversion was done in the following steps.

    1. The initial automatic conversion of all .c files updated slightly
    over 4000 files, deleting around 700 includes and adding ~480 gfp.h
    and ~3000 slab.h inclusions. The script emitted errors for ~400
    files.

    2. Each error was manually checked. Some didn't need the inclusion,
    some needed manual addition while adding it to implementation .h or
    embedding .c file was more appropriate for others. This step added
    inclusions to around 150 files.

    3. The script was run again and the output was compared to the edits
    from #2 to make sure no file was left behind.

    4. Several build tests were done and a couple of problems were fixed.
    e.g. lib/decompress_*.c used malloc/free() wrappers around slab
    APIs requiring slab.h to be added manually.

    5. The script was run on all .h files but without automatically
    editing them as sprinkling gfp.h and slab.h inclusions around .h
    files could easily lead to inclusion dependency hell. Most gfp.h
    inclusion directives were ignored as stuff from gfp.h was usually
    wildly available and often used in preprocessor macros. Each
    slab.h inclusion directive was examined and added manually as
    necessary.

    6. percpu.h was updated not to include slab.h.

    7. Build test were done on the following configurations and failures
    were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
    distributed build env didn't work with gcov compiles) and a few
    more options had to be turned off depending on archs to make things
    build (like ipr on powerpc/64 which failed due to missing writeq).

    * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
    * powerpc and powerpc64 SMP allmodconfig
    * sparc and sparc64 SMP allmodconfig
    * ia64 SMP allmodconfig
    * s390 SMP allmodconfig
    * alpha SMP allmodconfig
    * um on x86_64 SMP allmodconfig

    8. percpu.h modifications were reverted so that it could be applied as
    a separate patch and serve as bisection point.

    Given the fact that I had only a couple of failures from tests on step
    6, I'm fairly confident about the coverage of this conversion patch.
    If there is a breakage, it's likely to be something in one of the arch
    headers which should be easily discoverable easily on most builds of
    the specific arch.

    Signed-off-by: Tejun Heo <tj@kernel.org>
    Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
    Cc: Ingo Molnar <mingo@redhat.com>
    Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

    Tejun Heo
     

24 Mar, 2010

1 commit

  • d7646f763   pcmcia: use dev_pm_ops for class pcmcia_socket_class ... Browse Code »

    Instead of requiring PCMCIA socket drivers to call various functions
    during their (bus) resume and suspend functions, register an own
    dev_pm_ops for this class. This fixes several suspend/resume bugs
    seen on db1xxx-ss, and probably on some other socket drivers, too.

    With regard to the asymmetry with only _noirq suspend, but split up
    resume, please see bug 14334 and commit 9905d1b411946fb3 .

    Signed-off-by: Dominik Brodowski

    Dominik Brodowski
     

18 Feb, 2010

1 commit

  • 0d418dfae   pcmcia/omap_cf: don't redefine SZ_2K ... Browse Code »

    This fixes:

    drivers/pcmcia/omap_cf.c:74:1: warning: "SZ_2K" redefined

    Since

    c1191b0 ([ARM] Kirkwood: create a mapping for the Security Accelerator SRAM)

    SZ_2K is defined in arch/arm/include/asm/sizes.h.

    Signed-off-by: Uwe Kleine-König
    Signed-off-by: Dominik Brodowski

    Uwe Kleine-König
     

21 Oct, 2009

1 commit

  • ce491cf85   omap: headers: Move remaining headers from include/mach to include/plat ... Browse Code »

    Move the remaining headers under plat-omap/include/mach
    to plat-omap/include/plat. Also search and replace the
    files using these headers to include using the right path.

    This was done with:

    #!/bin/bash
    mach_dir_old="arch/arm/plat-omap/include/mach"
    plat_dir_new="arch/arm/plat-omap/include/plat"
    headers=$(cd $mach_dir_old && ls *.h)
    omap_dirs="arch/arm/*omap*/ \
    drivers/video/omap \
    sound/soc/omap"
    other_files="drivers/leds/leds-ams-delta.c \
    drivers/mfd/menelaus.c \
    drivers/mfd/twl4030-core.c \
    drivers/mtd/nand/ams-delta.c"

    for header in $headers; do
    old="#include

    Tony Lindgren
     

29 Sep, 2009

1 commit

07 Aug, 2008

2 commits

03 Jul, 2008

1 commit

01 May, 2008

1 commit

16 Apr, 2008

1 commit

  • 12c2c019e   pcmcia: fix platform driver hotplug/coldplug ... Browse Code »

    Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is
    prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable PCMCIA
    platform drivers, to re-enable auto loading.

    [dbrownell@users.sourceforge.net: registration fixes]
    Signed-off-by: Kay Sievers
    Signed-off-by: David Brownell
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Kay Sievers