28 Nov, 2020
1 commit
-
Pull printk fixes from Petr Mladek:
- do not lose trailing newline in pr_cont() calls
- two trivial fixes for a dead store and a config description
* tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: finalize records with trailing newlines
printk: remove unneeded dead-store assignment
init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT description
13 Nov, 2020
1 commit
-
Since Grub may align the size of initrd to 4 if user pass
initrd from cpio, we have to check the preceding 3 bytes as well.Link: https://lkml.kernel.org/r/160520205132.303174.4876760192433315429.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 85c46b78da58 ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly")
Reported-by: Chen Yu
Tested-by: Chen Yu
Signed-off-by: Masami Hiramatsu
Signed-off-by: Steven Rostedt (VMware)
03 Nov, 2020
1 commit
-
Currently, LOG_BUF_SHIFT defaults to 17, which is 2 ^ 17 bytes = 128 KB,
and LOG_CPU_MAX_BUF_SHIFT defaults to 12, which is 2 ^ 12 bytes = 4 KB.Half of 128 KB is 64 KB, so more than 16 CPUs are required for the value
to be used, as then the sum of contributions is greater than 64 KB for
the first time. My guess is, that the description was written with the
configuration values used in the SUSE in mind.Fixes: 23b2899f7f194f06e ("printk: allow increasing the ring buffer depending on the number of CPUs")
Cc: Luis R. Rodriguez
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Paul Menzel
Reviewed-by: Petr Mladek
Signed-off-by: Petr Mladek
Link: https://lore.kernel.org/r/20200811092924.6256-1-pmenzel@molgen.mpg.de
19 Oct, 2020
1 commit
-
…/kernel/git/shuah/linux-kselftest
Pull more Kunit updates from Shuah Khan:
- add Kunit to kernel_init() and remove KUnit from init calls entirely.
This addresses the concern that Kunit would not work correctly during
late init phase.- add a linker section where KUnit can put references to its test
suites.This is the first step in transitioning to dispatching all KUnit
tests from a centralized executor rather than having each as its own
separate late_initcall.- add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.- convert bitfield test to use KUnit framework
- Documentation updates for naming guidelines and how
kunit_test_suite() works.- add test plan to KUnit TAP format
* tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE
lib: kunit: add bitfield test conversion to KUnit
Documentation: kunit: add a brief blurb about kunit_test_suite
kunit: test: add test plan to KUnit TAP format
init: main: add KUnit to kernel init
kunit: test: create a single centralized executor for all tests
vmlinux.lds.h: add linker section for KUnit test suites
Documentation: kunit: Add naming guidelines
16 Oct, 2020
2 commits
-
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).- Support listing and getting information about bpf_links via the bpf
syscall.- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
... -
Pull trivial updates from Jiri Kosina:
"The latest advances in computer science from the trivial queue"* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
xtensa: fix Kconfig typo
spelling.txt: Remove some duplicate entries
mtd: rawnand: oxnas: cleanup/simplify code
selftests: vm: add fragment CONFIG_GUP_BENCHMARK
perf: Fix opt help text for --no-bpf-event
HID: logitech-dj: Fix spelling in comment
bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG
MAINTAINERS: rectify MMP SUPPORT after moving cputype.h
scif: Fix spelling of EACCES
printk: fix global comment
lib/bitmap.c: fix spello
fs: Fix missing 'bit' in comment
14 Oct, 2020
2 commits
-
Pull printk updates from Petr Mladek:
"The big new thing is the fully lockless ringbuffer implementation,
including the support for continuous lines. It will allow to store and
read messages in any situation wihtout the risk of deadlocks and
without the need of temporary per-CPU buffers.The access is still serialized by logbuf_lock. It synchronizes few
more operations, for example, temporary buffer for formatting the
message, syslog and kmsg_dump operations. The lock removal is being
discussed and should be ready for the next release.The continuous lines are handled exactly the same way as before to
avoid regressions in user space. It means that they are appended to
the last message when the caller is the same. Only the last message
can be extended.The data ring includes plain text of the messages. Except for an
integer at the beginning of each message that points back to the
descriptor ring with other metadata.The dictionary has to stay. journalctl uses it to filter the log. It
allows to show messages related to a given device. The dictionary
values are stored in the descriptor ring with the other metadata.This is the first part of the printk rework as discussed at Plumbers
2019, see https://lore.kernel.org/r/87k1acz5rx.fsf@linutronix.de. The
next big step will be handling consoles by kthreads during the normal
system operation. It will require special handling of situations when
the kthreads could not get scheduled, for example, early boot,
suspend, panic.Other changes:
- Add John Ogness as a reviewer for printk subsystem. He is author of
the rework and is familiar with the code and history.- Fix locking in serial8250_do_startup() to prevent lockdep report.
- Few code cleanups"
* tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (27 commits)
printk: Use fallthrough pseudo-keyword
printk: reduce setup_text_buf size to LOG_LINE_MAX
printk: avoid and/or handle record truncation
printk: remove dict ring
printk: move dictionary keys to dev_printk_info
printk: move printk_info into separate array
printk: reimplement log_cont using record extension
printk: ringbuffer: add finalization/extension support
printk: ringbuffer: change representation of states
printk: ringbuffer: clear initial reserved fields
printk: ringbuffer: add BLK_DATALESS() macro
printk: ringbuffer: relocate get_data()
printk: ringbuffer: avoid memcpy() on state_var
printk: ringbuffer: fix setting state in desc_read()
kernel.h: Move oops_in_progress to printk.h
scripts/gdb: update for lockless printk ringbuffer
scripts/gdb: add utils.read_ulong()
docs: vmcoreinfo: add lockless printk ringbuffer vmcoreinfo
printk: reduce LOG_BUF_SHIFT range for H8300
printk: ringbuffer: support dataless records
... -
Pull io_uring updates from Jens Axboe:
- Add blkcg accounting for io-wq offload (Dennis)
- A use-after-free fix for io-wq (Hillf)
- Cancelation fixes and improvements
- Use proper files_struct references for offload
- Cleanup of io_uring_get_socket() since that can now go into our own
header- SQPOLL fixes and cleanups, and support for sharing the thread
- Improvement to how page accounting is done for registered buffers and
huge pages, accounting the real pinned state- Series cleaning up the xarray code (Willy)
- Various cleanups, refactoring, and improvements (Pavel)
- Use raw spinlock for io-wq (Sebastian)
- Add support for ring restrictions (Stefano)
* tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (62 commits)
io_uring: keep a pointer ref_node in file_data
io_uring: refactor *files_register()'s error paths
io_uring: clean file_data access in files_register
io_uring: don't delay io_init_req() error check
io_uring: clean leftovers after splitting issue
io_uring: remove timeout.list after hrtimer cancel
io_uring: use a separate struct for timeout_remove
io_uring: improve submit_state.ios_left accounting
io_uring: simplify io_file_get()
io_uring: kill extra check in fixed io_file_get()
io_uring: clean up ->files grabbing
io_uring: don't io_prep_async_work() linked reqs
io_uring: Convert advanced XArray uses to the normal API
io_uring: Fix XArray usage in io_uring_add_task_file
io_uring: Fix use of XArray in __io_uring_files_cancel
io_uring: fix break condition for __io_uring_register() waiting
io_uring: no need to call xa_destroy() on empty xarray
io_uring: batch account ->req_issue and task struct references
io_uring: kill callback_head argument for io_req_task_work_add()
io_uring: move req preps out of io_issue_sqe()
...
13 Oct, 2020
1 commit
-
Pull documentation updates from Jonathan Corbet:
"As hoped, things calmed down for docs this cycle; fewer changes and
almost no conflicts at all. This includes:- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents- The usual collection of translation updates, typo fixes, etc"
* tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits)
gpiolib: Update indentation in driver.rst for code excerpts
Documentation/admin-guide: tainted-kernels: Fix typo occured
Documentation: better locations for sysfs-pci, sysfs-tagging
docs: programming-languages: refresh blurb on clang support
Documentation: kvm: fix a typo
Documentation: Chinese translation of Documentation/arm64/amu.rst
doc: zh_CN: index files in arm64 subdirectory
mailmap: add entry for
doc: seq_file: clarify role of *pos in ->next()
docs: trace: ring-buffer-design.rst: use the new SPDX tag
Documentation: kernel-parameters: clarify "module." parameters
Fix references to nommu-mmap.rst
docs: rewrite admin-guide/sysctl/abi.rst
docs: fb: Remove vesafb scrollback boot option
docs: fb: Remove sstfb scrollback boot option
docs: fb: Remove matroxfb scrollback boot option
docs: fb: Remove framebuffer scrollback boot option
docs: replace the old User Mode Linux HowTo with a new one
Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev"
Documentation/admin-guide: README & svga: remove use of "rdev"
...
12 Oct, 2020
1 commit
10 Oct, 2020
1 commit
-
Although we have not seen any actual examples where KUnit doesn't work
because it runs in the late init phase of the kernel, it has been a
concern for some time that this could potentially be an issue in the
future. So, remove KUnit from init calls entirely, instead call directly
from kernel_init() so that KUnit runs after late init.Co-developed-by: Alan Maguire
Signed-off-by: Alan Maguire
Signed-off-by: Brendan Higgins
Reviewed-by: Stephen Boyd
Reviewed-by: Kees Cook
Reviewed-by: Luis Chamberlain
Signed-off-by: Shuah Khan
01 Oct, 2020
1 commit
-
Grab actual references to the files_struct. To avoid circular references
issues due to this, we add a per-task note that keeps track of what
io_uring contexts a task has used. When the tasks execs or exits its
assigned files, we cancel requests based on this tracking.With that, we can grab proper references to the files table, and no
longer need to rely on stashing away ring_fd and ring_file to check
if the ring_fd may have been closed.Cc: stable@vger.kernel.org # v5.5+
Reviewed-by: Pavel Begunkov
Signed-off-by: Jens Axboe
25 Sep, 2020
1 commit
-
nommu-mmap.rst was moved to Documentation/admin-guide/mm; this patch
updates the remaining stale references to Documentation/mm.Fixes: 800c02f5d030 ("docs: move nommu-mmap.txt to admin-guide and rename to ReST")
Signed-off-by: Stephen Kitt
Link: https://lore.kernel.org/r/20200812092230.27541-1-steve@sk2.org
Signed-off-by: Jonathan Corbet
23 Sep, 2020
1 commit
-
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.Signed-off-by: David S. Miller
19 Sep, 2020
2 commits
-
This eliminates the following sparse warning:
init/main.c:306:6: warning: symbol 'xbc_namebuf' was not declared.
Should it be static?Link: https://lkml.kernel.org/r/20200915070324.2239473-1-yanaijie@huawei.com
Reported-by: Hulk Robot
Acked-by: Masami Hiramatsu
Signed-off-by: Jason Yan
Signed-off-by: Steven Rostedt (VMware) -
Since kprobe_event= cmdline option allows user to put kprobes on the
functions in initmem, kprobe has to make such probes gone after boot.
Currently the probes on the init functions in modules will be handled
by module callback, but the kernel init text isn't handled.
Without this, kprobes may access non-exist text area to disable or
remove it.Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2
Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter")
Cc: Jonathan Corbet
Cc: Shuah Khan
Cc: Randy Dunlap
Cc: Ingo Molnar
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu
Signed-off-by: Steven Rostedt (VMware)
08 Sep, 2020
1 commit
-
The .bss section for the h8300 is relatively small. A value of
CONFIG_LOG_BUF_SHIFT that is larger than 19 will create a static
printk ringbuffer that is too large. Limit the range appropriately
for the H8300.Reported-by: kernel test robot
Signed-off-by: John Ogness
Reviewed-by: Sergey Senozhatsky
Acked-by: Steven Rostedt (VMware)
Signed-off-by: Petr Mladek
Link: https://lore.kernel.org/r/20200812073122.25412-1-john.ogness@linutronix.de
05 Sep, 2020
2 commits
-
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).Signed-off-by: Jakub Kicinski
-
init_stat() returns 0 on success, same as vfs_lstat(). When it replaced
vfs_lstat(), the '!' was dropped.Fixes: 716308a5331b ("init: add an init_stat helper")
Signed-off-by: Barret Rhoden
Reviewed-by: Christoph Hellwig
Signed-off-by: Linus Torvalds
01 Sep, 2020
1 commit
-
Fix up one typo: CONFIG_BOOTCONFIG -> CONFIG_BOOT_CONFIG
Cc: Steven Rostedt
Cc: Masami Hiramatsu
Signed-off-by: Shaokun Zhang
Acked-by: Masami Hiramatsu
Signed-off-by: Jiri Kosina
29 Aug, 2020
1 commit
-
Introduce sleepable BPF programs that can request such property for themselves
via BPF_F_SLEEPABLE flag at program load time. In such case they will be able
to use helpers like bpf_copy_from_user() that might sleep. At present only
fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only
when they are attached to kernel functions that are known to allow sleeping.The non-sleepable programs are relying on implicit rcu_read_lock() and
migrate_disable() to protect life time of programs, maps that they use and
per-cpu kernel structures used to pass info between bpf programs and the
kernel. The sleepable programs cannot be enclosed into rcu_read_lock().
migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs
should not be enclosed in migrate_disable() as well. Therefore
rcu_read_lock_trace is used to protect the life time of sleepable progs.There are many networking and tracing program types. In many cases the
'struct bpf_prog *' pointer itself is rcu protected within some other kernel
data structure and the kernel code is using rcu_dereference() to load that
program pointer and call BPF_PROG_RUN() on it. All these cases are not touched.
Instead sleepable bpf programs are allowed with bpf trampoline only. The
program pointers are hard-coded into generated assembly of bpf trampoline and
synchronize_rcu_tasks_trace() is used to protect the life time of the program.
The same trampoline can hold both sleepable and non-sleepable progs.When rcu_read_lock_trace is held it means that some sleepable bpf program is
running from bpf trampoline. Those programs can use bpf arrays and preallocated
hash/lru maps. These map types are waiting on programs to complete via
synchronize_rcu_tasks_trace();Updates to trampoline now has to do synchronize_rcu_tasks_trace() and
synchronize_rcu_tasks() to wait for sleepable progs to finish and for
trampoline assembly to finish.This is the first step of introducing sleepable progs. Eventually dynamically
allocated hash maps can be allowed and networking program types can become
sleepable too.Signed-off-by: Alexei Starovoitov
Signed-off-by: Daniel Borkmann
Reviewed-by: Josef Bacik
Acked-by: Andrii Nakryiko
Acked-by: KP Singh
Link: https://lore.kernel.org/bpf/20200827220114.69225-3-alexei.starovoitov@gmail.com
20 Aug, 2020
1 commit
-
Add kernel module with user mode driver that populates bpffs with
BPF iterators.$ mount bpffs /my/bpffs/ -t bpf
$ ls -la /my/bpffs/
total 4
drwxrwxrwt 2 root root 0 Jul 2 00:27 .
drwxr-xr-x 19 root root 4096 Jul 2 00:09 ..
-rw------- 1 root root 0 Jul 2 00:27 maps.debug
-rw------- 1 root root 0 Jul 2 00:27 progs.debugThe user mode driver will load BPF Type Formats, create BPF maps, populate BPF
maps, load two BPF programs, attach them to BPF iterators, and finally send two
bpf_link IDs back to the kernel.
The kernel will pin two bpf_links into newly mounted bpffs instance under
names "progs.debug" and "maps.debug". These two files become human readable.$ cat /my/bpffs/progs.debug
id name attached
11 dump_bpf_map bpf_iter_bpf_map
12 dump_bpf_prog bpf_iter_bpf_prog
27 test_pkt_access
32 test_main test_pkt_access test_pkt_access
33 test_subprog1 test_pkt_access_subprog1 test_pkt_access
34 test_subprog2 test_pkt_access_subprog2 test_pkt_access
35 test_subprog3 test_pkt_access_subprog3 test_pkt_access
36 new_get_skb_len get_skb_len test_pkt_access
37 new_get_skb_ifindex get_skb_ifindex test_pkt_access
38 new_get_constant get_constant test_pkt_accessThe BPF program dump_bpf_prog() in iterators.bpf.c is printing this data about
all BPF programs currently loaded in the system. This information is unstable
and will change from kernel to kernel as ".debug" suffix conveys.Signed-off-by: Alexei Starovoitov
Signed-off-by: Daniel Borkmann
Link: https://lore.kernel.org/bpf/20200819042759.51280-4-alexei.starovoitov@gmail.com
15 Aug, 2020
1 commit
-
Pull OpenRISC updates from Stafford Horne:
"A few patches all over the place during this cycle, mostly bug and
sparse warning fixes for OpenRISC, but a few enhancements too. Note,
there are 2 non OpenRISC specific fixups.Non OpenRISC fixes:
- In init we need to align the init_task correctly to fix an issue
with MUTEX_FLAGS, reviewed by Peter Z. No one picked this up so I
kept it on my tree.- In asm-generic/io.h I fixed up some sparse warnings, OK'd by Arnd.
Arnd asked to merge it via my tree.OpenRISC fixes:
- Many fixes for OpenRISC sprase warnings.
- Add support OpenRISC SMP tlb flushing rather than always flushing
the entire TLB on every CPU.- Fix bug when dumping stack via /proc/xxx/stack of user threads"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: uaccess: Add user address space check to access_ok
openrisc: signal: Fix sparse address space warnings
openrisc: uaccess: Remove unused macro __addr_ok
openrisc: uaccess: Use static inline function in access_ok
openrisc: uaccess: Fix sparse address space warnings
openrisc: io: Fixup defines and move include to the end
asm-generic/io.h: Fix sparse warnings on big-endian architectures
openrisc: Implement proper SMP tlb flushing
openrisc: Fix oops caused when dumping stack
openrisc: Add support for external initrd images
init: Align init_task to avoid conflict with MUTEX_FLAGS
openrisc: fix __user in raw_copy_to_user()'s prototype
11 Aug, 2020
1 commit
-
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.- The seqcount associated lock debug addons which were blocked by the
above fallout.seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.- Conversion of seqcount usage sites to associated types and
initializers"* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce header dependencies by moving XTP bits into the new header
x86/headers: Remove APIC headers from
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
08 Aug, 2020
5 commits
-
Pull tracing updates from Steven Rostedt:
- The biggest news in that the tracing ring buffer can now time events
that interrupted other ring buffer events.Before this change, if an interrupt came in while recording another
event, and that interrupt also had an event, those events would all
have the same time stamp as the event it interrupted.Now, with the new design, those events will have a unique time stamp
and rightfully display the time for those events that were recorded
while interrupting another event.- Bootconfig how has an "override" operator that lets the users have a
default config, but then add options to override the default.- A fix was made to properly filter function graph tracing to the
ftrace PIDs. This came in at the end of the -rc cycle, and needs to
be backported.- Several clean ups, performance updates, and minor fixes as well.
* tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (39 commits)
tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers
kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACE
tracing: Use trace_sched_process_free() instead of exit() for pid tracing
bootconfig: Fix to find the initargs correctly
Documentation: bootconfig: Add bootconfig override operator
tools/bootconfig: Add testcases for value override operator
lib/bootconfig: Add override operator support
kprobes: Remove show_registers() function prototype
tracing/uprobe: Remove dead code in trace_uprobe_register()
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler
ftrace: Fix ftrace_trace_task return value
tracepoint: Use __used attribute definitions from compiler_attributes.h
tracepoint: Mark __tracepoint_string's __used
trace : Have tracing buffer info use kvzalloc instead of kzalloc
tracing: Remove outdated comment in stack handling
ftrace: Do not let direct or IPMODIFY ftrace_ops be added to module and set trampolines
ftrace: Setup correct FTRACE_FL_REGS flags for module
tracing/hwlat: Honor the tracing_cpumask
tracing/hwlat: Drop the duplicate assignment in start_kthread()
tracing: Save one trace_event->type by using __TRACE_LAST_TYPE
... -
Merge misc updates from Andrew Morton:
- a few MM hotfixes
- kthread, tools, scripts, ntfs and ocfs2
- some of MM
Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).* emailed patches from Andrew Morton : (162 commits)
mm: vmscan: consistent update to pgrefill
mm/vmscan.c: fix typo
khugepaged: khugepaged_test_exit() check mmget_still_valid()
khugepaged: retract_page_tables() remember to test exit
khugepaged: collapse_pte_mapped_thp() protect the pmd lock
khugepaged: collapse_pte_mapped_thp() flush the right range
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
mm: thp: replace HTTP links with HTTPS ones
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
mm/page_alloc.c: skip setting nodemask when we are in interrupt
mm/page_alloc: fallbacks at most has 3 elements
mm/page_alloc: silence a KASAN false positive
mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
mm/page_alloc.c: simplify pageblock bitmap access
mm/page_alloc.c: extract the common part in pfn_to_bitidx()
mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
mm/shuffle: remove dynamic reconfiguration
mm/memory_hotplug: document why shuffle_zone() is relevant
mm/page_alloc: remove nr_free_pagecache_pages()
mm: remove vm_total_pages
... -
This patch prepares Software Tag-Based KASAN for stack tagging support.
With stack tagging enabled, KASAN tags stack variable in each function in
its prologue. In start_kernel() stack variables get tagged before KASAN
is enabled via setup_arch()->kasan_init(). As the result the tags for
start_kernel()'s stack variables end up in the temporary shadow memory.
Later when KASAN gets enabled, switched to normal shadow, and starts
checking tags, this leads to false-positive reports, as proper tags are
missing in normal shadow.Disable KASAN instrumentation for start_kernel(). Also disable it for
arm64's setup_arch() as a precaution (it doesn't have any stack variables
right now).[andreyknvl@google.com: reorder attributes for start_kernel()]
Link: http://lkml.kernel.org/r/26fb6165a17abcf61222eda5184c030fb6b133d1.1596544734.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov
Signed-off-by: Andrew Morton
Acked-by: Catalin Marinas [arm64]
Cc: Alexander Potapenko
Cc: Andrey Ryabinin
Cc: Dmitry Vyukov
Cc: Elena Petrova
Cc: Marco Elver
Cc: Vincenzo Frascino
Cc: Walter Wu
Cc: Ard Biesheuvel
Link: http://lkml.kernel.org/r/55d432671a92e931ab8234b03dc36b14d4c21bfb.1596199677.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds -
Patch series "mm: Expand CONFIG_SLAB_FREELIST_HARDENED to include SLAB"
In reviewing Vlastimil Babka's latest slub debug series, I realized[1]
that several checks under CONFIG_SLAB_FREELIST_HARDENED weren't being
applied to SLAB. Fix this by expanding the Kconfig coverage, and adding a
simple double-free test for SLAB.This patch (of 2):
Include SLAB caches when performing kmem_cache pointer verification. A
defense against such corruption[1] should be applied to all the
allocators. With this added, the "SLAB_FREE_CROSS" and "SLAB_FREE_PAGE"
LKDTM tests now pass on SLAB:lkdtm: Performing direct entry SLAB_FREE_CROSS
lkdtm: Attempting cross-cache slab free ...
------------[ cut here ]------------
cache_from_obj: Wrong slab cache. lkdtm-heap-b but object is from lkdtm-heap-a
WARNING: CPU: 2 PID: 2195 at mm/slab.h:530 kmem_cache_free+0x8d/0x1d0
...
lkdtm: Performing direct entry SLAB_FREE_PAGE
lkdtm: Attempting non-Slab slab free ...
------------[ cut here ]------------
virt_to_cache: Object is not a Slab page!
WARNING: CPU: 1 PID: 2202 at mm/slab.h:489 kmem_cache_free+0x196/0x1d0Additionally clean up neighboring Kconfig entries for clarity,
readability, and redundant option removal.[1] https://github.com/ThomasKing2014/slides/raw/master/Building%20universal%20Android%20rooting%20with%20a%20type%20confusion%20vulnerability.pdf
Fixes: 598a0717a816 ("mm/slab: validate cache membership under freelist hardening")
Signed-off-by: Kees Cook
Signed-off-by: Andrew Morton
Acked-by: Vlastimil Babka
Cc: Alexander Popov
Cc: Christoph Lameter
Cc: David Rientjes
Cc: Jann Horn
Cc: Joonsoo Kim
Cc: Matthew Garrett
Cc: Pekka Enberg
Cc: Roman Gushchin
Cc: Vijayanand Jitta
Cc: Vinayak Menon
Link: http://lkml.kernel.org/r/20200625215548.389774-1-keescook@chromium.org
Link: http://lkml.kernel.org/r/20200625215548.389774-2-keescook@chromium.org
Signed-off-by: Linus Torvalds -
Pull init and set_fs() cleanups from Al Viro:
"Christoph's 'getting rid of ksys_...() uses under KERNEL_DS' series"* 'hch.init_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (50 commits)
init: add an init_dup helper
init: add an init_utimes helper
init: add an init_stat helper
init: add an init_mknod helper
init: add an init_mkdir helper
init: add an init_symlink helper
init: add an init_link helper
init: add an init_eaccess helper
init: add an init_chmod helper
init: add an init_chown helper
init: add an init_chroot helper
init: add an init_chdir helper
init: add an init_rmdir helper
init: add an init_unlink helper
init: add an init_umount helper
init: add an init_mount helper
init: mark create_dev as __init
init: mark console_on_rootfs as __init
init: initialize ramdisk_execute_command at compile time
devtmpfs: refactor devtmpfsd()
...
05 Aug, 2020
6 commits
-
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
... -
Add a simple helper to grab a reference to a file and install it at
the next available fd, and switch the early init code over to it.Signed-off-by: Christoph Hellwig
Signed-off-by: Al Viro -
Pull execve updates from Eric Biederman:
"During the development of v5.7 I ran into bugs and quality of
implementation issues related to exec that could not be easily fixed
because of the way exec is implemented. So I have been diggin into
exec and cleaning up what I can.This cycle I have been looking at different ideas and different
implementations to see what is possible to improve exec, and cleaning
the way exec interfaces with in kernel users. Only cleaning up the
interfaces of exec with rest of the kernel has managed to stabalize
and make it through review in time for v5.9-rc1 resulting in 2 sets of
changes this cycle.- Implement kernel_execve
- Make the user mode driver code a better citizen
With kernel_execve the code size got a little larger as the copying of
parameters from userspace and copying of parameters from userspace is
now separate. The good news is kernel threads no longer need to play
games with set_fs to use exec. Which when combined with the rest of
Christophs set_fs changes should security bugs with set_fs much more
difficult"* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
exec: Implement kernel_execve
exec: Factor bprm_stack_limits out of prepare_arg_pages
exec: Factor bprm_execve out of do_execve_common
exec: Move bprm_mm_init into alloc_bprm
exec: Move initialization of bprm->filename into alloc_bprm
exec: Factor out alloc_bprm
exec: Remove unnecessary spaces from binfmts.h
umd: Stop using split_argv
umd: Remove exit_umh
bpfilter: Take advantage of the facilities of struct pid
exit: Factor thread_group_exited out of pidfd_poll
umd: Track user space drivers with struct pid
bpfilter: Move bpfilter_umh back into init data
exec: Remove do_execve_file
umh: Stop calling do_execve_file
umd: Transform fork_usermode_blob into fork_usermode_driver
umd: Rename umd_info.cmdline umd_info.driver_name
umd: For clarity rename umh_info umd_info
umh: Separate the user mode driver and the user mode helper support
umh: Remove call_usermodehelper_setup_file.
... -
Pull seccomp updates from Kees Cook:
"There are a bunch of clean ups and selftest improvements along with
two major updates to the SECCOMP_RET_USER_NOTIF filter return:
EPOLLHUP support to more easily detect the death of a monitored
process, and being able to inject fds when intercepting syscalls that
expect an fd-opening side-effect (needed by both container folks and
Chrome). The latter continued the refactoring of __scm_install_fd()
started by Christoph, and in the process found and fixed a handful of
bugs in various callers.- Improved selftest coverage, timeouts, and reporting
- Add EPOLLHUP support for SECCOMP_RET_USER_NOTIF (Christian Brauner)
- Refactor __scm_install_fd() into __receive_fd() and fix buggy
callers- Introduce 'addfd' command for SECCOMP_RET_USER_NOTIF (Sargun
Dhillon)"* tag 'seccomp-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
selftests/seccomp: Test SECCOMP_IOCTL_NOTIF_ADDFD
seccomp: Introduce addfd ioctl to seccomp user notifier
fs: Expand __receive_fd() to accept existing fd
pidfd: Replace open-coded receive_fd()
fs: Add receive_fd() wrapper for __receive_fd()
fs: Move __scm_install_fd() to __receive_fd()
net/scm: Regularize compat handling of scm_detach_fds()
pidfd: Add missing sock updates for pidfd_getfd()
net/compat: Add missing sock updates for SCM_RIGHTS
selftests/seccomp: Check ENOSYS under tracing
selftests/seccomp: Refactor to use fixture variants
selftests/harness: Clean up kern-doc for fixtures
seccomp: Use -1 marker for end of mode 1 syscall list
seccomp: Fix ioctl number for SECCOMP_IOCTL_NOTIF_ID_VALID
selftests/seccomp: Rename user_trap_syscall() to user_notif_syscall()
selftests/seccomp: Make kcmp() less required
seccomp: Use pr_fmt
selftests/seccomp: Improve calibration loop
selftests/seccomp: use 90s as timeout
selftests/seccomp: Expand benchmark to per-filter measurements
... -
Since the parse_args() stops parsing at '--', bootconfig_params()
will never get the '--' as param and initargs_found never be true.
In the result, if we pass some init arguments via the bootconfig,
those are always appended to the kernel command line with '--'
even if the kernel command line already has '--'.To fix this correctly, check the return value of parse_args()
and set initargs_found true if the return value is not an error
but a valid address.Link: https://lkml.kernel.org/r/159650953285.270383.14822353843556363851.stgit@devnote2
Fixes: f61872bb58a1 ("bootconfig: Use parse_args() to find bootconfig and '--'")
Cc: stable@vger.kernel.org
Reported-by: Arvind Sankar
Suggested-by: Arvind Sankar
Signed-off-by: Masami Hiramatsu
Signed-off-by: Steven Rostedt (VMware) -
Pull automatic variable initialization updates from Kees Cook:
"This adds the "zero" init option from Clang, which is being used
widely in production builds of Android and Chrome OS (though it also
keeps the "pattern" init, which is better for debug builds).- Introduce CONFIG_INIT_STACK_ALL_ZERO (Alexander Potapenko)"
* tag 'var-init-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
security: allow using Clang's zero initialization for stack variables
04 Aug, 2020
3 commits
-
When booting on 32-bit machines (seen on OpenRISC) I saw this warning
with CONFIG_DEBUG_MUTEXES turned on.------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/locking/mutex.c:1242 __mutex_unlock_slowpath+0x328/0x3ec
DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current)
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc1-simple-smp-00005-g2864e2171db4-dirty #179
Call trace:
[] dump_stack+0x34/0x48
[] __warn+0x104/0x158
[] ? __mutex_unlock_slowpath+0x328/0x3ec
[] warn_slowpath_fmt+0x7c/0x94
[] __mutex_unlock_slowpath+0x328/0x3ec
[] mutex_unlock+0x18/0x28
[] __cpuhp_setup_state_cpuslocked.part.0+0x29c/0x2f4
[] ? page_alloc_cpu_dead+0x0/0x30
[] ? start_kernel+0x0/0x684
[] __cpuhp_setup_state+0x4c/0x5c
[] page_alloc_init+0x34/0x68
[] ? start_kernel+0x1a0/0x684
[] ? early_init_dt_scan_nodes+0x60/0x70
irq event stamp: 0I traced this to kernel/locking/mutex.c storing 3 bits of MUTEX_FLAGS in
the task_struct pointer (mutex.owner). There is a comment saying that
task_structs are always aligned to L1_CACHE_BYTES. This is not true for
the init_task.On 64-bit machines this is not a problem because symbol addresses are
naturally aligned to 64-bits providing 3 bits for MUTEX_FLAGS. Howerver,
for 32-bit machines the symbol address only has 2 bits available.Fix this by setting init_task alignment to at least L1_CACHE_BYTES.
Signed-off-by: Stafford Horne
Acked-by: Peter Zijlstra (Intel) -
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups all around the place"* tag 'x86-cleanups-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Initialize pointer bitmap with NULL rather than 0
x86: uv: uv_hub.h: Delete duplicated word
x86: cmpxchg_32.h: Delete duplicated word
x86: bootparam.h: Delete duplicated word
x86/mm: Remove the unused mk_kernel_pgd() #define
x86/tsc: Remove unused "US_SCALE" and "NS_SCALE" leftover macros
x86/ioapic: Remove unused "IOAPIC_AUTO" define
x86/mm: Drop unused MAX_PHYSADDR_BITS
x86/msr: Move the F15h MSRs where they belong
x86/idt: Make idt_descr static
initrd: Remove erroneous comment
x86/mm/32: Fix -Wmissing prototypes warnings for init.c
cpu/speculation: Add prototype for cpu_show_srbds()
x86/mm: Fix -Wmissing-prototypes warnings for arch/x86/mm/init.c
x86/asm: Unify __ASSEMBLY__ blocks
x86/cpufeatures: Mark two free bits in word 3
x86/msr: Lift AMD family 0x15 power-specific MSRs -
Pull x86 boot updates from Ingo Molnar:
"The main change in this cycle was to add support for ZSTD-compressed
kernel and initrd images.ZSTD has a very fast decompressor, yet it compresses better than gzip"
* tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: dontdiff: Add zstd compressed files
.gitignore: Add ZSTD-compressed files
x86: Add support for ZSTD compressed kernel
x86: Bump ZO_z_extra_bytes margin for zstd
usr: Add support for zstd compressed initramfs
init: Add support for zstd compressed kernel
lib: Add zstd support to decompress
lib: Prepare zstd for preboot environment, improve performance
31 Jul, 2020
2 commits
-
- Add the zstd and zstd22 cmds to scripts/Makefile.lib
- Add the HAVE_KERNEL_ZSTD and KERNEL_ZSTD options
Architecture specific support is still needed for decompression.
Signed-off-by: Nick Terrell
Signed-off-by: Ingo Molnar
Tested-by: Sedat Dilek
Reviewed-by: Kees Cook
Link: https://lore.kernel.org/r/20200730190841.2071656-4-nickrterrell@gmail.com -
Add a simple helper to set timestamps with a kernel space file name and
switch the early init code over to it.Signed-off-by: Christoph Hellwig
