06 Jan, 2012
7 commits
-
Support for IT1935 9006 devices.
9006 have version 2 type chip.
9006 devices should use dvb-usb-it9135-02.fw firmware.
On the device tested the tuner id was set to 0 which meant
the driver used tuner id 0x38. The device functioned normally.Signed-off-by: Malcolm Priestley
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Mauro Carvalho Chehab
-
Instead of creating two DVB frontend entries for the same device,
create just one entry, and fill the delivery_system according with
the supported standards.Signed-off-by: Mauro Carvalho Chehab
-
ops.info.frequency_stepsize is used only for DVB-T & friends. For
DVB-C, the step size is calculated using the symbol rate.Signed-off-by: Mauro Carvalho Chehab
-
While this patch change some things, the updated fields there are
used just on printk, so it shouldn't cause any functional changes.Yet, this routine is a little complex, so explain a little more
how it works.Signed-off-by: Mauro Carvalho Chehab
-
Instead of changing the ops.info.type struct, updates only
the data that will be returned to userspace.Also add some debug messages to help tracking such issues.
Signed-off-by: Mauro Carvalho Chehab
-
without it, the loop will run forever!
Signed-off-by: Mauro Carvalho Chehab
05 Jan, 2012
33 commits
-
[mchehab@redhat.com: patch rebased to apply]
Signed-off-by: Stefan Ringel
Signed-off-by: Mauro Carvalho Chehab -
WARNING: "__udivdi3" [/home/v4l/new_build/v4l/cx25840.ko] undefined!
64 bits division need to call do_div & friends, in order to allow
it to compile with 32 bits kernelsCc: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
Making the detected video standard available to the core driver
and for user query.Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
Adding support for the CX23888 DIF.
Changes regression tested against the HVR1700 and HVR1800.Split out much of the set and init handling of the cx23885 based
cards into their own functions. Added the DIF initialization code
for each supported IF.Updated the cx23885 code to correctly initialize cx23888 based
video/audio decoders.Enabled Closed Caption support for CX23885 based cards during
initialization.Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
The card names are being truncated in the video4linux sys class name file.
Prior to this patch they were shown as:
cx23885[0] mpeg (Hauppauge WinT
cx23885[0] video (Hauppauge WinT
cx23885[0] vbi (Hauppauge WinTAfter this patch they are shown as:
Hauppauge WinTV-HVR1850 (video)
Hauppauge WinTV-HVR1850 (mpeg)
Hauppauge WinTV-HVR1850 (vbi)Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
Added three new control calls (g_std, querystd and g_ctrl) to
the -417 driver. Also routed other controls through the main
cx23885 driver meaning that the controls for the 417 and the
raw video device all enter the driver code and are handled
in a single place.Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
First in a series of patches that adds support to the cx23885 driver
for CX23888 analog video handling. Raw and MPEG video support is
being added for the HVR1850 driver in the patch, and the following
series of patches.Some basic cx23885 driver cleanup. Partly to add HVR1850 support
and partly to allow -417.c V4L2 calls to be routed through thr
driver core and handled in a single place.Make a number of core driver functions available to the -417.c
driver to streamline the driver.Add the analog tuner ops definition so we can reach/tune the
hardware when we need to. Added the tff field so 888 based cards
(which have a weird field ordering issue) can be accomodated
and worked around in the driver.Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
The CX23888 (HVR1850 and other new cards) contain a DIF which is responsible
for demodulating the audio and video. It's built directly into the CX23888
PCIe bridge. It needs to be enabled and disabled on a per-card and per-input
basis. We pass this flag from the cx23885 core driver to the sub-device
when we need the cx25840 driver to enable/disable with the DIF correctly.Signed-off-by: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
Now, ops->info.type is handled inside the dvb_frontend
core, only for DVBv3 calls, and according with the
delivery system. So, drivers should not care or use it,
otherwise, it may have issues with DVBv5 calls.The drivers that were still using it were detected via
this small temporary hack:--- a/include/linux/dvb/frontend.h
+++ b/include/linux/dvb/frontend.h
@@ -29,13 +29,16 @@
#includetypedef enum fe_type {
+#if defined(__DVB_CORE__) || !defined (__KERNEL__)
FE_QPSK,
FE_QAM,
FE_OFDM,
FE_ATSC
+#else
+FE_FOOO
+#endif
} fe_type_t;-
typedef enum fe_caps {
FE_IS_STUPID = 0,
FE_CAN_INVERSION_AUTO = 0x1,Signed-off-by: Mauro Carvalho Chehab
-
While the driver has support for both serial and parallel mode,
There's was way to select serial mode via configuration. Add
a config option for that, while keeping the default in serial mode.Also, at debug mode, it will now print a message when mpeg is
enabled/disabled, and showing if parallel or serial mode were
selected, helping developers to double-check if the DRX-K is at
the right mode.Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
get_if_frequency() is needed, in order to work with DRX-K.
Signed-off-by: Mauro Carvalho Chehab
-
The per-delivery system tables are confusing.
Add an extra table that explains them, and some
dprintk calls, that allows to check if mt2063 driver
is working as expected.Signed-off-by: Mauro Carvalho Chehab
-
Instead of printing it just for debug purposes, outputs the detected
version at the logs. This may be useful if someone wants to report
a problem.Signed-off-by: Mauro Carvalho Chehab
-
While here, improve a few debug messages that helped to track the
issue and may be useful in the future.Signed-off-by: Mauro Carvalho Chehab
-
This also helps to identify when a device is not initialized,
if the bridge doesn't return an error for a I2C failed transfer.Signed-off-by: Mauro Carvalho Chehab
-
Instead of crash, return -ENODEV, if the device is not poperly
initialized.Also, give a second chance for it to initialize, at set_params
calls.Signed-off-by: Mauro Carvalho Chehab
-
mt2063.c:1531:12: warning: variable 'ofout' set but not used [-Wunused-but-set-variable]
mt2063.c:1531:6: warning: variable 'ofin' set but not used [-Wunused-but-set-variable]Signed-off-by: Mauro Carvalho Chehab
-
Several vars at set_parms functions were set, but unused.
Remove them and change the logic to return -EINVAL if the
analog set_param is used for digital mode.At the analog side, cleans the logic that sets the several
analog standards.Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
No functional changes on this patch. Better organize the delivery
system information and data types, putting everything together,
to improve readability.Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
The driver were using a hacky way of setting analog and digital
frequencies. Remove the hack and properly add the tuner logic for
each supported type of standard.I was tempted to add more standards there, like SECAM and to fix
radio (as stepping seems broken), but I opted to keep it as-is,
as tests would be needed to add additional standards.Signed-off-by: Mauro Carvalho Chehab
-
Fix everything but 80 columns and two msleep warnings
Signed-off-by: Mauro Carvalho Chehab
-
No functional changes here.
Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
This layer just increases the code size for no good reason,
and makes harder to debug.Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
