04 Jan, 2012
1 commit
-
Move invalidate_bdev, block_sync_page into fs/block_dev.c. Export
kill_bdev as well, so brd doesn't have to open code it. Reduce
buffer_head.h requirement accordingly.Removed a rather large comment from invalidate_bdev, as it looked a bit
obsolete to bother moving. The small comment replacing it says enough.Signed-off-by: Nick Piggin
Cc: Al Viro
Cc: Christoph Hellwig
Signed-off-by: Andrew Morton
Signed-off-by: Al Viro
22 Apr, 2011
1 commit
-
In-kernel disk event polling doesn't matter for legacy/fringe drivers
and may lead to infinite event loop if ->check_events() implementation
generates events on level condition instead of edge.Now that block layer supports suppressing exporting unlisted events,
simply leaving disk->events cleared allows these drivers to keep the
internal revalidation behavior intact while avoiding weird
interactions with userland event handler.Signed-off-by: Tejun Heo
Cc: Kay Sievers
Signed-off-by: Jens Axboe
25 Mar, 2011
1 commit
-
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...Fix up conflicts in fs/{aio.c,super.c}
17 Mar, 2011
1 commit
-
amiga_chip_alloc() returns a void *, so we don't need a cast.
Also clean up coding style while we're at it.Signed-off-by: Geert Uytterhoeven
10 Mar, 2011
1 commit
-
Convert the floppy drivers from ->media_changed() to ->check_events().
Both floppy and ataflop buffer media changed state bit and clear them
on revalidation and will behave correctly with kernel event polling.I can't tell how amiflop clears its event and it's possible that it
may generate spurious events when polled.Signed-off-by: Tejun Heo
Cc: Jens Axboe
Cc: Kay Sievers
16 Nov, 2010
1 commit
-
Geert, my crosstool don't produce warning below. I guess this has to do
something with compiler version.- Geert noticed following warning during compilation.
drivers/block/amiflop.c:1344: warning: ‘rq’ may be used uninitialized in
this function
drivers/block/ataflop.c:1402: warning: ‘rq’ may be used uninitialized in
this function- Initialize rq to NULL to fix the warning. If we can't find a suitable request
to dispatch, this function should return NULL instead of a possibly garbage
pointer.- Cross compile tested only. Don't have hardware to test it.
Reported-by: Geert Uytterhoeven
Signed-off-by: Vivek Goyal
Signed-off-by: Jens Axboe
23 Oct, 2010
1 commit
-
* 'for-2.6.37/drivers' of git://git.kernel.dk/linux-2.6-block: (95 commits)
cciss: fix PCI IDs for new Smart Array controllers
drbd: add race-breaker to drbd_go_diskless
drbd: use dynamic_dev_dbg to optionally log uuid changes
dynamic_debug.h: Fix dynamic_dev_dbg() macro if CONFIG_DYNAMIC_DEBUG not set
drbd: cleanup: change "s
drbd: add explicit drbd_md_sync to drbd_resync_finished
drbd: Do not log an ASSERT for P_OV_REQUEST packets while C_CONNECTED
drbd: fix for possible deadlock on IO error during resync
drbd: fix unlikely access after free and list corruption
drbd: fix for spurious fullsync (uuids rotated too fast)
drbd: allow for explicit resync-finished notifications
drbd: preparation commit, using full state in receive_state()
drbd: drbd_send_ack_dp must not rely on header information
drbd: Fix regression in recv_bm_rle_bits (compressed bitmap)
drbd: Fixed a stupid copy and paste error
drbd: Allow larger values for c-fill-target.
...Fix up trivial conflict in drivers/block/ataflop.c due to BKL removal
05 Oct, 2010
1 commit
-
The block device drivers have all gained new lock_kernel
calls from a recent pushdown, and some of the drivers
were already using the BKL before.This turns the BKL into a set of per-driver mutexes.
Still need to check whether this is safe to do.file=$1
name=$2
if grep -q lock_kernel ${file} ; then
if grep -q 'include.*linux.mutex.h' ${file} ; then
sed -i '/include.*/d' ${file}
else
sed -i 's/include.*.*$/include /g' ${file}
fi
sed -i ${file} \
-e "/^#include.*linux.mutex.h/,$ {
1,/^\(static\|int\|long\)/ {
/^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);} }" \
-e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
-e '/[ ]*cycle_kernel_lock();/d'
else
sed -i -e '/include.*\/d' ${file} \
-e '/cycle_kernel_lock()/d'
fiSigned-off-by: Arnd Bergmann
26 Sep, 2010
1 commit
-
o Compile fixes for amiga floppy driver.
Signed-off-by: Vivek Goyal
Signed-off-by: Jens Axboe
25 Sep, 2010
1 commit
-
o Use one request queue per gendisk instead of sharing request queue
o Don't have hardware. No compile testing or run time testing done. Completely
untested.Signed-off-by: Vivek Goyal
Signed-off-by: Jens Axboe
08 Aug, 2010
2 commits
-
The open and release block_device_operations are currently
called with the BKL held. In order to change that, we must
first make sure that all drivers that currently rely
on this have no regressions.This blindly pushes the BKL into all .open and .release
operations for all block drivers to prepare for the
next step. The drivers can subsequently replace the BKL
with their own locks or remove it completely when it can
be shown that it is not needed.The functions blkdev_get and blkdev_put are the only
remaining users of the big kernel lock in the block
layer, besides a few uses in the ioctl code, none
of which need to serialize with blkdev_{get,put}.Most of these two functions is also under the protection
of bdev->bd_mutex, including the actual calls to
->open and ->release, and the common code does not
access any global data structures that need the BKL.Signed-off-by: Arnd Bergmann
Acked-by: Christoph Hellwig
Signed-off-by: Jens Axboe -
As a preparation for the removal of the big kernel
lock in the block layer, this removes the BKL
from the common ioctl handling code, moving it
into every single driver still using it.Signed-off-by: Arnd Bergmann
Acked-by: Christoph Hellwig
Signed-off-by: Jens Axboe
18 May, 2010
1 commit
-
Signed-off-by: Geert Uytterhoeven
30 Mar, 2010
1 commit
-
…it slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
22 Sep, 2009
1 commit
-
Signed-off-by: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
09 Jul, 2009
1 commit
-
Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up
handling of log-levels and newlines") changed printk semantics. printk
lines with multiple KERN_ prefixes are no longer emitted as
before the patch.is now included in the output on each additional use.
Remove all uses of multiple KERN_s in formats.
Signed-off-by: Joe Perches
Signed-off-by: Linus Torvalds
11 May, 2009
3 commits
-
Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request(). After that, drivers are free to either dequeue it
or process it without dequeueing. Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary. However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing. Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.Previous patches converted all block low level drivers to dequeueing
model. This patch completes the API transition by...* renaming elv_next_request() to blk_peek_request()
* renaming blkdev_dequeue_request() to blk_start_request()
* adding blk_fetch_request() which is combination of peek and start
* disallowing completion of queued (not started) requests
* applying new API to all LLDs
Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.[ Impact: block request issue API cleanup, no functional change ]
Signed-off-by: Tejun Heo
Cc: Rusty Russell
Cc: James Bottomley
Cc: Mike Miller
Cc: unsik Kim
Cc: Paul Clements
Cc: Tim Waugh
Cc: Geert Uytterhoeven
Cc: David S. Miller
Cc: Laurent Vivier
Cc: Jeff Garzik
Cc: Jeremy Fitzhardinge
Cc: Grant Likely
Cc: Adrian McMenamin
Cc: Stephen Rothwell
Cc: Bartlomiej Zolnierkiewicz
Cc: Borislav Petkov
Cc: Sergei Shtylyov
Cc: Alex Dubov
Cc: Pierre Ossman
Cc: David Woodhouse
Cc: Markus Lidel
Cc: Stefan Weinhuber
Cc: Martin Schwidefsky
Cc: Pete Zaitcev
Cc: FUJITA Tomonori
Signed-off-by: Jens Axboe -
Request processing in amiflop is done sequentially in
redo_fd_request() proper and redo_fd_request() can easily be converted
to track in-flight request. Remove CURRENT, track in-flight request
directly and dequeue it when processing starts.[ Impact: dequeue in-flight request ]
Signed-off-by: Tejun Heo
Signed-off-by: Jens Axboe -
With recent cleanups, there is no place where low level driver
directly manipulates request fields. This means that the 'hard'
request fields always equal the !hard fields. Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.While at it, drop superflous blk_rq_pos() < 0 test in swim.c.
[ Impact: use pos and nr_sectors accessors ]
Signed-off-by: Tejun Heo
Acked-by: Geert Uytterhoeven
Tested-by: Grant Likely
Acked-by: Grant Likely
Tested-by: Adrian McMenamin
Acked-by: Adrian McMenamin
Acked-by: Mike Miller
Cc: James Bottomley
Cc: Bartlomiej Zolnierkiewicz
Cc: Borislav Petkov
Cc: Sergei Shtylyov
Cc: Eric Moore
Cc: Alan Stern
Cc: FUJITA Tomonori
Cc: Pete Zaitcev
Cc: Stephen Rothwell
Cc: Paul Clements
Cc: Tim Waugh
Cc: Jeff Garzik
Cc: Jeremy Fitzhardinge
Cc: Alex Dubov
Cc: David Woodhouse
Cc: Martin Schwidefsky
Cc: Dario Ballabio
Cc: David S. Miller
Cc: Rusty Russell
Cc: unsik Kim
Cc: Laurent Vivier
Signed-off-by: Jens Axboe
28 Apr, 2009
2 commits
-
rq_data_dir() can only be READ or WRITE and rq->sector and nr_sectors
are always automatically updated after partial request completion.
Don't worry about rq_data_dir() not being either READ or WRITE or
manually update sector and nr_sectors.[ Impact: cleanup ]
Signed-off-by: Tejun Heo
Cc: Jörg Dorchain
Cc: Geert Uytterhoeven
Cc: unsik Kim
Signed-off-by: Jens Axboe -
end_request() has been kept around for backward compatibility;
however, it's about time for it to go away.* There aren't too many users left.
* Its use of @updtodate is pretty confusing.
* In some cases, newer code ends up using mixture of end_request() and
[__]blk_end_request[_all](), which is way too confusing.So, add [__]blk_end_request_cur() and replace end_request() with it.
Most conversions are straightforward. Noteworthy ones are...* paride/pcd: next_request() updated to take 0/-errno instead of 1/0.
* paride/pf: pf_end_request() and next_request() updated to take
0/-errno instead of 1/0.* xd: xd_readwrite() updated to return 0/-errno instead of 1/0.
* mtd/mtd_blkdevs: blktrans_discard_request() updated to return
0/-errno instead of 1/0. Unnecessary local variable res
initialization removed from mtd_blktrans_thread().[ Impact: cleanup ]
Signed-off-by: Tejun Heo
Acked-by: Joerg Dorchain
Acked-by: Geert Uytterhoeven
Acked-by: Grant Likely
Acked-by: Laurent Vivier
Cc: Tim Waugh
Cc: Stephen Rothwell
Cc: Paul Mackerras
Cc: Jeremy Fitzhardinge
Cc: Markus Lidel
Cc: David Woodhouse
Cc: Pete Zaitcev
Cc: unsik Kim
13 Jan, 2009
1 commit
-
Apart from sleep_on() calls that could be easily converted to
wait_event() and completion calls amiflop also used a flag in ms_delay()
and ms_isr() as a custom mutex for ms_delay() without a need for
explicit unlocking. I converted that to a standard mutex.The replacement for the unconditional sleep_on() in fd_motor_on() is a
complete_all() together with a INIT_COMPLETION() before the mod_timer()
call. It appears to me that fd_motor_on() might be called concurrently
and fd_select() does not guarantee mutual exclusivity in the case the
same drive gets selected again.Signed-off-by: Andreas Bombe
Acked-by: Jörg Dorchain
Signed-off-by: Geert Uytterhoeven
21 Oct, 2008
3 commits
-
Signed-off-by: Al Viro
-
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both. That's this changeset.
2) for each driver convert to new methods. *ALL* drivers
are converted in this series.
3) kill the old (renamed) methods.Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain. The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.New methods:
open(bdev, mode)
release(disk, mode)
ioctl(bdev, mode, cmd, arg) /* Called without BKL */
compat_ioctl(bdev, mode, cmd, arg)
locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
19 May, 2008
1 commit
-
According to the tests in do_initcalls(), the proper error code in case no
device is found is -ENODEV, not -ENXIO or -EIO.Signed-off-by: Geert Uytterhoeven
Signed-off-by: Linus Torvalds
24 Jul, 2007
1 commit
-
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.Signed-off-by: Jens Axboe
10 Jul, 2007
1 commit
-
- I have unearthed very old bugs in stale drivers that still
used request->cmd as a READ|WRITE int
- This patch is maybe a proof that these drivers have not been
used for a long time. Should they be removed completely?Drivers that currently do not work for sure:
drivers/acorn/block/fd1772.c | 2 +-
drivers/acorn/block/mfmhd.c | 8 ++++----
drivers/cdrom/aztcd.c | 2 +-
drivers/cdrom/cm206.c | 2 +-
drivers/cdrom/gscd.c | 2 +-
drivers/cdrom/mcdx.c | 2 +-
drivers/cdrom/optcd.c | 2 +-
drivers/cdrom/sjcd.c | 2 +-Drivers with cosmetic fixes only:
b/drivers/block/amiflop.c
b/drivers/block/nbd.c
b/drivers/ide/legacy/hd.cSigned-off-by: Boaz Harrosh
Signed-off-by: Jens Axboe
08 May, 2007
1 commit
-
Remove the destroy_dirty_buffers argument from invalidate_bdev(), it hasn't
been used in 6 years (so akpm says).find * -name \*.[ch] | xargs grep -l invalidate_bdev |
while read file; do
quilt add $file;
sed -ie 's/invalidate_bdev(\([^,]*\),[^)]*)/invalidate_bdev(\1)/g' $file;
doneSigned-off-by: Peter Zijlstra
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
12 Oct, 2006
1 commit
-
It used to be called directly, but that got lost in 2.1.87-pre1.
Similar breakage in ataflop got fixed 3 years ago, this one
had gone unnoticed.Signed-off-by: Al Viro
Signed-off-by: Linus Torvalds
05 Oct, 2006
1 commit
-
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.Signed-Off-By: David Howells
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
26 Jun, 2006
1 commit
-
Introduce irq controller and use it to manage auto vector interrupts.
Introduce setup_irq() which can be used for irq setup.Signed-off-by: Roman Zippel
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
01 Apr, 2006
1 commit
-
The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).And __setup() is used in obsolete_checksetup().
start_kernel()
-> parse_args()
-> unknown_bootoption()
-> obsolete_checksetup()If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func(). If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.This patch fixes a wrong usage of it, however fixes obvious one only.
Signed-off-by: OGAWA Hirofumi
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
13 Jan, 2006
3 commits
-
Signed-off-by: Al Viro
Cc: Roman Zippel
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Signed-off-by: Al Viro
Cc: Roman Zippel
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
in amigahw.h custom renamed to amiga_custom, in drivers with few instances the
same replacement, in the rest - #define custom amiga_custom in driver itselfSigned-off-by: Al Viro
Cc: Roman Zippel
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
09 Jan, 2006
2 commits
-
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a
duplicate of ARRAY_SIZE. Some trailing whitespaces are also removed.drivers/block/acsi* has been left out as it's marked BROKEN.
Signed-off-by: Tobias Klauser
Cc: Jens Axboe
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
HDIO_GETGEO is implemented in most block drivers, and all of them have to
duplicate the code to copy the structure to userspace, as well as getting
the start sector. This patch moves that to common code [1] and adds a
->getgeo method to fill out the raw kernel hd_geometry structure. For many
drivers this means ->ioctl can go away now.[1] the s390 block drivers are odd in this respect. xpram sets ->start
to 4 always which seems more than odd, and the dasd driver shifts
the start offset around, probably because of it's non-standard
sector size.Signed-off-by: Christoph Hellwig
Cc: Jens Axboe
Cc:
Cc: Jeff Dike
Cc: Paolo Giarrusso
Cc: Bartlomiej Zolnierkiewicz
Cc: Neil Brown
Cc: Markus Lidel
Cc: Russell King
Cc: David Woodhouse
Cc: Martin Schwidefsky
Cc: James Bottomley
Signed-off-by: Adrian Bunk
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
09 Nov, 2005
1 commit
-
This patch removes almost all inclusions of linux/version.h. The 3
#defines are unused in most of the touched files.A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is
unfortunatly in linux/version.h.There are also lots of #ifdef for long obsolete kernels, this was not
touched. In a few places, the linux/version.h include was move to where
the LINUX_VERSION_CODE was used.quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'`
search pattern:
/UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).hSigned-off-by: Olaf Hering
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Apr, 2005
1 commit
-
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.Let it rip!
