10 Dec, 2011
1 commit
-
This enables a much more efficient way of device searching. It uses the
1-wire read-rom operation which allows the direct reading of the slave
address. BUT this works only with exactly one slave on the bus.Signed-off-by: Hubert Feurstein
Acked-by: Evgeniy Polyakovindex c374978..9761950 100644
Signed-off-by: Greg Kroah-Hartman
19 Nov, 2011
1 commit
-
This converts the remaining USB drivers in the kernel to use the
module_usb_driver() macro which makes the code smaller and a bit
simpler.Added bonus is that it removes some unneeded kernel log messages about
drivers loading and/or unloading.Cc: Guenter Roeck
Cc: Jean Delvare
Cc: Ben Dooks
Cc: Till Harbaum
Cc: Karsten Keil
Cc: Chris Ball
Cc: David Woodhouse
Cc: Lauro Ramos Venancio
Cc: Aloisio Almeida Jr
Cc: Samuel Ortiz
Cc: Steve Glendinning
Cc: Florian Tobias Schandinat
Cc: Evgeniy Polyakov
Cc: Wim Van Sebroeck
Cc: "David S. Miller"
Cc: Jesper Juhl
Cc: Artem Bityutskiy
Cc: Jamie Iles
Cc: Andrew Morton
Signed-off-by: Greg Kroah-Hartman
18 Nov, 2011
1 commit
-
w1_therm devices can either be bus powered or externally powered.
When device is bus powered during temperature conversion the bus
have to be left high to provide necessary power. Some masters also allow
strong power-up to be enabled in this case.
Naturally, no communication over bus can occur during that time.However, if device has external power then there is no such restriction,
and host can talk to other devices during temperature conversion.There is command which allows us to check how device is powered,
this patch uses it to release the bus on externally w1_therm powered devices
during temperature conversion.Also, this changes uninterruptible sleeps there into interruptible ones to
avoid long uninterruptible sleep if w1 subsystem happens to grab bus for
scan during w1_therm_read().Signed-off-by: Maciej Szmigiero
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman
07 Nov, 2011
1 commit
-
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
Revert "tracing: Include module.h in define_trace.h"
irq: don't put module.h into irq.h for tracking irqgen modules.
bluetooth: macroize two small inlines to avoid module.h
ip_vs.h: fix implicit use of module_get/module_put from module.h
nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
include: replace linux/module.h with "struct module" wherever possible
include: convert various register fcns to macros to avoid include chaining
crypto.h: remove unused crypto_tfm_alg_modname() inline
uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
pm_runtime.h: explicitly requires notifier.h
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
miscdevice.h: fix up implicit use of lists and types
stop_machine.h: fix implicit use of smp.h for smp_processor_id
of: fix implicit use of errno.h in include/linux/of.h
of_platform.h: delete needless include
acpi: remove module.h include from platform/aclinux.h
miscdevice.h: delete unnecessary inclusion of module.h
device_cgroup.h: delete needless include
net: sch_generic remove redundant use of
net: inet_timewait_sock doesnt need
...Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
- drivers/media/dvb/frontends/dibx000_common.c
- drivers/media/video/{mt9m111.c,ov6650.c}
- drivers/mfd/ab3550-core.c
- include/linux/dmaengine.h
03 Nov, 2011
4 commits
-
Interrupting w1_delay() in w1_read_bit() results in missing the low level
on the w1 line and receiving "1" instead of "0".Add local_irq_save()/local_irq_restore() around the critical section
Signed-off-by: Jan Weitzel
Acked-by: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
When using multiple masters, w1_int.c would use the .init_name from w1.c
for all entities, which will fail when creating a corresponding sysfs
entry. This patch uses the unique name previously generated.WARNING: at fs/sysfs/dir.c:451 sysfs_add_one+0x48/0x64()
sysfs: cannot create duplicate filename '/devices/w1 bus master'
Modules linked in:
Call trace:
[] warn_slowpath_common+0x34/0x44
[] warn_slowpath_fmt+0x14/0x18
[] sysfs_add_one+0x48/0x64
[] create_dir+0x40/0x68
[] sysfs_create_dir+0x66/0x78
[] kobject_add_internal+0x6e/0x104
[] kobject_add_varg+0x20/0x2c
[] kobject_add+0x30/0x3c
[] device_add+0x6a/0x378
[] device_initialize+0x12/0x48
[] device_register+0xc/0x10
[] w1_add_master_device+0x162/0x274
[] w1_gpio_probe+0x66/0xb4
[] kernel_init+0x0/0xe8
[] platform_drv_probe+0xc/0xe
[] kernel_init+0x0/0xe8
[] driver_probe_device+0x6c/0xdc
[] __driver_attach+0x34/0x48
[] bus_for_each_dev+0x2c/0x48
[] __driver_attach+0x0/0x48
[] driver_attach+0x10/0x14
[] bus_add_driver+0x6a/0x18c
[] driver_register+0x60/0xb8
[] __initcall_w1_therm_init6+0x0/0x4
[] w1_gpio_init+0x0/0x14
[] kernel_init+0x0/0xe8
[] platform_driver_register+0x30/0x38
[] __initcall_w1_therm_init6+0x0/0x4
[] w1_gpio_init+0x0/0x14
[] kernel_init+0x0/0xe8
[] platform_driver_probe+0xe/0x3c
[] w1_gpio_init+0xc/0x14
[] __initcall_w1_therm_init6+0x0/0x4
[] w1_gpio_init+0x0/0x14
[] do_one_initcall+0x34/0x130
[] kernel_init+0x66/0xe8
[] __initcall_w1_therm_init6+0x0/0x4
[] do_exit+0x0/0x3a6
[] kernel_init+0x0/0xe8
[] do_exit+0x0/0x3a6---[ end trace 5a9233884fead918 ]---
kobject_add_internal failed for w1 bus master with -EEXIST, don't try to register things with the same name in the same directory.Signed-off-by: Florian Faber
Cc: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Adds a nolock function to the w1 interface to avoid locking the
mutex if needed.Signed-off-by: Clifton Barnes
Cc: Evgeniy Polyakov
Cc:
Cc:
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Straightforward. As an aside, the ida_init calls are not needed as far as
I can see needed. (DEFINE_IDA does the same already).Signed-off-by: Jonathan Cameron
Cc: Evgeniy Polyakov
Acked-by: Clifton Barnes
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
01 Nov, 2011
2 commits
-
It doesn't need the full module.h but it was getting moduleparam.h
from the fact that module.h was everywhere.Signed-off-by: Paul Gortmaker
-
Give these files export.h so that they can reliably get the EXPORT_SYMBOL
and THIS_MODULE macros in the future, once module.h isn't implicitly
everywhere.Signed-off-by: Paul Gortmaker
26 Aug, 2011
2 commits
-
Signed-off-by: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The for loop was looking for i = 0 so this function
never did anything. Also we started with i = NB_SYSFS_BIN_FILES instead
of "NB_SYSFS_BIN_FILES - 1" which is an off by one bug.Reported-by: Bojan Prtvar
Signed-off-by: Dan Carpenter
Acked-by: Jean-Franois Dagenais
Cc: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
27 Jul, 2011
2 commits
-
This allows us to move duplicated code in
(atomic_inc_not_zero() for now) toSigned-off-by: Arun Sharma
Reviewed-by: Eric Dumazet
Cc: Ingo Molnar
Cc: David Miller
Cc: Eric Dumazet
Acked-by: Mike Frysinger
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Signed-off-by: Christian Glindkamp
Cc: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
09 Jul, 2011
1 commit
-
This fixes a regression in 3.0 reported by Paul Parsons regarding the
removal of the msleep(1) in the ds1wm_reset() function:: The linux-3.0-rc4 DS1WM 1-wire driver is logging "bus error, retrying"
: error messages on an HP iPAQ hx4700 PDA (XScale-PXA270):
:
:
: Driver for 1-wire Dallas network protocol.
: DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
: 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
: ds1wm ds1wm: pass: 1 bus error, retrying
: ds1wm ds1wm: pass: 2 bus error, retrying
: ds1wm ds1wm: pass: 3 bus error, retrying
: ds1wm ds1wm: pass: 4 bus error, retrying
: ds1wm ds1wm: pass: 5 bus error, retrying
: ...
:
: The visible result is that the battery charging LED is erratic; sometimes
: it works, mostly it doesn't.
:
: The linux-2.6.39 DS1WM 1-wire driver worked OK. I haven't tried 3.0-rc1,
: 3.0-rc2, or 3.0-rc3.This sleep should not be required on normal circuitry provided the
pull-ups on the bus are correctly adapted to the slaves. Unfortunately,
this is not always the case. The sleep is restored but as a parameter to
the probe function in the pdata.[akpm@linux-foundation.org: coding-style fixes]
Reported-by: Paul Parsons
Tested-by: Paul Parsons
Signed-off-by: Jean-François Dagenais
Cc: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
16 Jun, 2011
1 commit
-
On m68k (which doesn't support generic hardirqs yet):
drivers/w1/masters/ds1wm.c: In function `ds1wm_probe':
drivers/w1/masters/ds1wm.c: error: implicit declaration of function `irq_set_irq_type'Signed-off-by: Geert Uytterhoeven
Cc: Evgeniy Polyakov
Cc: Jean-Franois Dagenais
Cc: Matt Reimer
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
27 May, 2011
6 commits
-
Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC.
It was suggested to combine this functionality with the current ds2782
driver. Unfortunately, I'm unable to commit the time to refactoring this
driver to that extent and I don't have a platform with the ds2782 part to
validate that there are no regression issues by adding this functionality.[akpm@linux-foundation.org: use min_t()]
Signed-off-by: Clifton Barnes
Tested-by: Haojian Zhuang
Cc: Evgeniy Polyakov
Cc: Ryan Mallon
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Reorganize so the netlink connector one wire search command will update
the kernel list of detected slave devices. Otherwise, a newly detected
device is unusable because unless it's in the kernel list of known devices
any commands will result in ENODEV status.Signed-off-by: David Fries
Cc: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This adds multi-slave support of the w1 bus for the ds1wm Synthesizable
1-Wire Bus Master. Also many fixes and tweaks based on the rev3 of the
datasheet http://datasheets.maxim-ic.com/en/ds/DS1WM.pdfSigned-off-by: Jean-François Dagenais
Cc: Evgeniy Polyakov
Cc: Szabolcs Gyurko
Cc: Matt Reimer
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This DS2408 w1 slave driver is not complete for all the features of the
chip, but its sufficient if you use it as a simple IO expander.[randy.dunlap@oracle.com: fix w1_ds2408.c printk formats]
Signed-off-by: Jean-François Dagenais
Cc: Evgeniy Polyakov
Cc: Szabolcs Gyurko
Cc: Matt Reimer
Signed-off-by: Randy Dunlap
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The first patch adds generic functionnality to w1_io for Resume Command
[A5h] lots of slaves support. I found it useful for multi-commands/reset
workflows with the same slave on a multi-slave bus.This DS2408 w1 slave driver is not complete for all the features of the
chip, but its sufficient if you use it as a simple IO expander. Enjoy!The ds1wm had Kconfig dependencies towards ARM && HAVE_CLK. I took them
out since I was using the ds1wm on an x86_64 platform (ds1wm in a FPGA
through pcie) and found them irrelevant.The clock freq/divisors at the top of ds1wm.c did not have the MSB set to
1. This bit is CLK_EN which turns the whole prescaler and dividers on.
The driver never mentionned this bit either, so I just included this bit
right in the table entries. I also took the liberty to add a couple of
entries to the table. The spec doesn't explicitely mentions these
possibilities but the description and examination of the core shows the
prescalers & dividers can be used for more than the table explicitely
shows. The table I enlarged still doesn't cover all possibilities, but
it's a good start.I also made a few tweaks to a couple of the read and write algorithms
which made sense while I had my head very deep in the ds1wm documentation.
We stressed it a lot with 10+ slaves on the bus, many ds2408, ds2431 and
ds2433 at the same time doing extensive interaction. It proved quite
stable in our production environment.This patch:
Add generic functionnality to w1_io for Resume Command [A5h] lots of
slaves support.Signed-off-by: Jean-François Dagenais
Cc: Evgeniy Polyakov
Cc: Szabolcs Gyurko
Cc: Matt Reimer
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
With the addition of the platform device mfd_cell pointer, we can now
cleanly pass the sub device drivers platform data pointers through the
regular device platform_data one, and get rid of mfd_get_data().Cc: Matt Reimer
Cc: Philipp Zabel
Signed-off-by: Samuel Ortiz
31 Mar, 2011
1 commit
-
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi
29 Mar, 2011
1 commit
-
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner
23 Mar, 2011
3 commits
-
mfd_get_cell returns a const, so change the ds1wm client to store
a const mfd cell. This silences type mismatch warnings.Since we're guaranteed to have the mfd_cell, we can also simplify
the code a bit to get rid of a temporary variable and NULL check.Signed-off-by: Andres Salomon
Signed-off-by: Samuel Ortiz -
Use mfd_data for passing information from mfd drivers to mfd
clients. The mfd_cell's driver_data field is being phased out.Clients that were using driver_data now access .mfd_data
via mfd_get_data(). This changes ds1wm only; mfd drivers with
other cells are not modified, with the exception of led_cell.The led_cell.driver_data line is dropped from htc-pasic3.c in this
patch as well. It's not used in mainline (there's no leds-pasic3
platform driver), so it should be safe to take care of that here.Signed-off-by: Andres Salomon
Signed-off-by: Samuel Ortiz -
No need to explicitly set the cell's platform_data/data_size.
Modify clients to use mfd_get_cell helper function instead of
accessing platform_data directly.Signed-off-by: Andres Salomon
Signed-off-by: Samuel Ortiz
17 Feb, 2011
1 commit
-
…16x' into omap-for-linus
12 Feb, 2011
1 commit
-
This code makes two calls to clk_get, then test both return values and
fails if either failed.The problem is that in the first inner if, where the first call to
clk_get has failed, it don't know if the second call has failed as well.
So it don't know whether clk_get should be called on the result of the
second call. Of course, it would be possible to test that value again.
A simpler solution is just to test the result of calling clk_get
directly after each call.The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)//
@r@
position p1,p2;
expression e;
statement S;
@@e = clk_get@p1(...)
...
if@p2 (IS_ERR(e)) S@@
expression e;
statement S;
identifier l;
position r.p1, p2 != r.p2;
@@*e = clk_get@p1(...)
... when != clk_put(e)
*if@p2 (...)
{
... when != clk_put(e)
* return ...;
}//Signed-off-by: Julia Lawall
Cc: Evgeniy Polyakov
Acked-by: Tony Lindgren
Acked-by: Amit Kucheria
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
28 Jan, 2011
1 commit
-
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest
are nowadays just subcategories of these.Search and replace the following:
ARCH_OMAP2420 SOC_OMAP2420
ARCH_OMAP2430 SOC_OMAP2430
ARCH_OMAP3430 SOC_OMAP3430No functional changes.
Signed-off-by: Tony Lindgren
Signed-off-by: Thomas Weber
Acked-by: Sourav Poddar
14 Jan, 2011
1 commit
-
This is a 1-wire/w1 DS2423 slave driver for reading the values from all 4
counters available DS2423 devices by using standard w1_slave file. In
ds2423 the counters are tied to ram pages 12-15 in and each of those
ram-pages. Each of these counter values (and asoociated ram page values)
are represented as a own line in w1_slave file. Driver has been tested on
mips and x86.usage example:
cat /sys/bus/w1/devices/1d-00000009b964/w1_slave00 02 00 00 00 00 00 00 00 6d 38 00 ff ff 00 00 fe ff 00 00 ff ff 00 00 ff
ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2
00 02 00 00 00 00 00 00 00 e0 1f 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff
ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2
00 5a 0e 5f 18 00 00 00 00 0b 28 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff
ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=408882778
00 05 00 00 00 00 00 00 00 8d 39 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff crc=YES c=5Patch includes also the documentation.
[randy.dunlap@oracle.com: fix ds2423 build, needs to select CRC16]
Signed-off-by: Mika Laitio
Signed-off-by: Randy Dunlap
Cc: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
28 Oct, 2010
1 commit
-
The search/pullup/add/remove device attributes were 0666 which would allow
arbitrary users to affect the 1 wire bus. Change to 0664 to prevent that.I found this patch in the Android tree, apparently this has never been
sent upstream so doing it now.Signed-off-by: Brian Swetland
Signed-off-by: Linus Walleij
Cc: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
22 May, 2010
1 commit
-
This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.Signed-off-by: Chris Wright
Signed-off-by: Greg Kroah-Hartman
25 Apr, 2010
2 commits
-
Fixes the following error:
drivers/w1/masters/omap_hdq.c: In function 'hdq_wait_for_flag':
drivers/w1/masters/omap_hdq.c:137: error: implicit declaration of function 'schedule_timeout_uninterruptible'
drivers/w1/masters/omap_hdq.c: In function 'hdq_write_byte':
drivers/w1/masters/omap_hdq.c:177: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function)
drivers/w1/masters/omap_hdq.c:177: error: (Each undeclared identifier is reported only once
drivers/w1/masters/omap_hdq.c:177: error: for each function it appears in.)
drivers/w1/masters/omap_hdq.c:177: error: implicit declaration of function 'schedule_timeout'
drivers/w1/masters/omap_hdq.c: In function 'hdq_isr':
drivers/w1/masters/omap_hdq.c:221: error: 'TASK_NORMAL' undeclared (first use in this function)
drivers/w1/masters/omap_hdq.c: In function 'omap_hdq_break':
drivers/w1/masters/omap_hdq.c:316: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function)Signed-off-by: Amit Kucheria
Acked-by: Tony Lindgren
Cc: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Fix regression caused by commit 507e2fbaaacb6f164b4125b87c5002f95143174b
("w1: w1 temp calculation overflow fix") whereby negative temperatures for
the DS18B20 are not converted properly.When the temperature exceeds 32767 milli-degrees the temperature overflows
to -32768 millidegrees. These are both well within the -55 - +125 degree
range for the sensor.Addresses https://bugzilla.kernel.org/show_bug.cgi?id=12646
Signed-of-by: Ian Dall
Cc: Evgeniy Polyakov
Tested-by: Karsten Elfenbein
Cc:
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
30 Mar, 2010
1 commit
-
…it slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
13 Mar, 2010
3 commits
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
doc: fix typo in comment explaining rb_tree usage
Remove fs/ntfs/ChangeLog
doc: fix console doc typo
doc: cpuset: Update the cpuset flag file
Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
Remove drivers/parport/ChangeLog
Remove drivers/char/ChangeLog
doc: typo - Table 1-2 should refer to "status", not "statm"
tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
devres/irq: Fix devm_irq_match comment
Remove reference to kthread_create_on_cpu
tree-wide: Assorted spelling fixes
tree-wide: fix 'lenght' typo in comments and code
drm/kms: fix spelling in error message
doc: capitalization and other minor fixes in pnp doc
devres: typo fix s/dev/devm/
Remove redundant trailing semicolons from macros
fix typo "definetly" -> "definitely" in comment
tree-wide: s/widht/width/g typo in comments
...Fix trivial conflict in Documentation/laptops/00-INDEX
-
This fixes the section mismatch warning for mxc_w1_probe()
Cc: Evgeniy Polyakov
Cc: Sascha Hauer
Acked-by: Uwe Kleine-König
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
With `while (++retries < DS2482_WAIT_IDLE_TIMEOUT)' retries reaches
DS2482_WAIT_IDLE_TIMEOUT after the loopSigned-off-by: Roel Kluin
Cc: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
08 Mar, 2010
1 commit
-
Conflicts:
Documentation/filesystems/proc.txt
arch/arm/mach-u300/include/mach/debug-macro.S
drivers/net/qlge/qlge_ethtool.c
drivers/net/qlge/qlge_main.c
drivers/net/typhoon.c
