19 Dec, 2011
1 commit
-
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.Signed-off-by: Rusty Russell
Signed-off-by: Takashi Iwai
01 Nov, 2011
1 commit
-
Lots of sound drivers were getting module.h via the implicit presence
of it in but we are going to clean that up. So
fix up those users now.Signed-off-by: Paul Gortmaker
29 Oct, 2011
1 commit
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits)
ALSA: hda - Fix ADC input-amp handling for Cx20549 codec
ALSA: hda - Keep EAPD turned on for old Conexant chips
ALSA: hda/realtek - Fix missing volume controls with ALC260
ASoC: wm8940: Properly set codec->dapm.bias_level
ALSA: hda - Fix pin-config for ASUS W90V
ALSA: hda - Fix surround/CLFE headphone and speaker pins order
ALSA: hda - Fix typo
ALSA: Update the sound git tree URL
ALSA: HDA: Add new revision for ALC662
ASoC: max98095: Convert codec->hw_write to snd_soc_write
ASoC: keep pointer to resource so it can be freed
ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls
ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2
ASoC: da7210: Add support for line out and DAC
ASoC: da7210: Add support for DAPM
ALSA: hda/realtek - Fix DAC assignments of multiple speakers
ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value
ASoC: Set sgtl5000->ldo in ldo_regulator_register
ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture
ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture
...
27 Oct, 2011
1 commit
08 Oct, 2011
1 commit
-
* pm-runtime:
PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set
PM / Runtime: Replace dev_dbg() with trace_rpm_*()
PM / Runtime: Introduce trace points for tracing rpm_* functions
PM / Runtime: Don't run callbacks under lock for power.irq_safe set
USB: Add wakeup info to debugging messages
PM / Runtime: pm_runtime_idle() can be called in atomic context
PM / Runtime: Add macro to test for runtime PM events
PM / Runtime: Add might_sleep() to runtime PM functions
26 Sep, 2011
1 commit
-
Before clearing the probing flag in the error exit path, check that the
chip pointer is not NULL.Signed-off-by: Thomas Pfaff
Cc: [2.6.39+]
Signed-off-by: Takashi Iwai
23 Sep, 2011
1 commit
-
The Terratec Aureon 5.1 USB sound card support is broken since kernel
2.6.39.
2.6.39 introduced power management support for USB sound cards that added
a probing flag in struct snd_usb_audio.During the probe of the card it gives following error message :
usb 7-2: new full speed USB device number 2 using uhci_hcd
cannot find UAC_HEADER
snd-usb-audio: probe of 7-2:1.3 failed with error -5
input: USB Audio as
/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.3/input/input6
generic-usb 0003:0CCD:0028.0001: input: USB HID v1.00 Device [USB Audio]
on usb-0000:00:1d.1-2/input3I can not comment about that "cannot find UAC_HEADER" error, but until
2.6.38 the card worked anyway.
With 2.6.39 chip->probing remains 1 on error exit, and any later ioctl
stops in snd_usb_autoresume with -ENODEV.Signed-off-by: Thomas Pfaff
Cc: [2.6.39+]
Signed-off-by: Takashi Iwai
14 Sep, 2011
2 commits
-
No code altered at this point, simply preparing for upcoming
refactorizations.Signed-off-by: Daniel Mack
Acked-by: Clemens Ladisch
Signed-off-by: Takashi Iwai -
Move code from endpoint.c into a new file called stream.c and rename
functions so that their names actually reflect what they're doing.This way, endpoint.c will be available to functions that hold all the
endpoint logic.Signed-off-by: Daniel Mack
Acked-by: Clemens Ladisch
Signed-off-by: Takashi Iwai
20 Aug, 2011
1 commit
-
This patch (as1482) adds a macro for testing whether or not a
pm_message value represents an autosuspend or autoresume (i.e., a
runtime PM) event. Encapsulating this notion seems preferable to
open-coding the test all over the place.Signed-off-by: Alan Stern
Acked-by: Greg Kroah-Hartman
Signed-off-by: Rafael J. Wysocki
08 Jul, 2011
1 commit
-
Signed-off-by: Pavel Roskin
Signed-off-by: Takashi Iwai
25 May, 2011
2 commits
-
In order to allow quirks functions to hook up to the standard feature
unit op tables, this patch exports a pointer to the struct that is used
internally.That way, all the code handling the control can be kept private, and
external code can reference the symbol to re-use it.Signed-off-by: Daniel Mack
Signed-off-by: Takashi Iwai -
This is needed for upcoming changes to the quirks mechanism.
Signed-off-by: Daniel Mack
Signed-off-by: Takashi Iwai
21 Mar, 2011
1 commit
-
Some USB devices give trailing spaces in strings returned from
usb_string(). This confuses the automatic card-id creation, resulting
always in "default".
This patch fixes the behavior by removing trailing spaces.Signed-off-by: Takashi Iwai
11 Mar, 2011
2 commits
-
Devices are autosuspended if no pcm nor midi channel is open
Mixer devices may be opened. This way they are active when
in use to play or record sound, but can be suspended while
users have a mixer application running.[Small clean-ups using static inline by tiwai]
Signed-off-by: Oliver Neukum
Signed-off-by: Takashi Iwai -
- ESHUTDOWN must be correctly handled
- the optional interrupt endpoint's URB must be stopped and restartedSigned-off-by: Oliver Neukum
Signed-off-by: Takashi Iwai
23 Feb, 2011
1 commit
-
When a USB audio device is disconnected, snd_usb_audio_disconnect()
kills all audio URBs. At the same time, the application, after being
notified of the disconnection, might close the device, in which case
ALSA calls the .hw_free callback, which should free the URBs too.Commit de1b8b93a0ba "[ALSA] Fix hang-up at disconnection of usb-audio"
prevented snd_usb_hw_free() from freeing the URBs to avoid a hang that
resulted from this race, but this introduced another race because the
URB callbacks could now be executed after snd_usb_hw_free() has
returned, and try to access already freed data.Fix the first race by introducing a mutex to serialize the disconnect
callback and all PCM callbacks that manage URBs (hw_free and hw_params).Reported-and-tested-by: Pierre-Louis Bossart
Cc:
[CL: also serialize hw_params callback]
Signed-off-by: Clemens Ladisch
Signed-off-by: Takashi Iwai
09 Sep, 2010
1 commit
08 Sep, 2010
1 commit
-
Due to the wrong "return" in the loop, a capture substream won't be
released at disconnection properly if the device is capture only and has
no playback substream. This caused Oops occasionally at the device
reconnection.Reported-by: Kim Minhyoung
Cc:
Signed-off-by: Takashi Iwai
04 Sep, 2010
2 commits
-
The Audio Class v2 support code in 2.6.35 added checks for the
bInterfaceProtocol field. However, there are devices (usually those
detected by vendor-specific quirks) that do not have one of the
predefined values in this field, which made the driver reject them.To fix this regression, restore the old behaviour, i.e., assume that
a device with an unknown bInterfaceProtocol field (other than
UAC_VERSION_2) has more or less UAC-v1-compatible descriptors.[compile warning fixes by tiwai]
Signed-off-by: Clemens Ladisch
Cc: Daniel Mack
Cc:
Signed-off-by: Takashi Iwai
02 Sep, 2010
1 commit
-
For devices with more than one control interface, let's assume the first
one contains the audio controls. Unfortunately, there is no field in any
of the descriptors to tell us whether a control interface is for audio
or MIDI controls, so a better check is not easy to implement.On a composite device with audio and MIDI functions, for example, the
code currently overwrites chip->ctrl_intf, causing operations on the
control interface to fail if they are issued after the device probe.Signed-off-by: Daniel Mack
Signed-off-by: Takashi Iwai
14 Aug, 2010
1 commit
-
This is V2 of the patch, after feedback from Clemens and Daniel.
This patch adds SuperSpeed support to the USB drivers under sound/. It adds
tests for USB_SPEED_SUPER to the appropriate places that check for the USB
speed.This patch has been tested with our SS USB3 device emulating a set of Yamaha
speakers and a Logitech microphone, but with the descriptors modified to add
USB3 support. It has also been tested with the real speakers and microphone,
to make sure that USB2 devices still work.Signed-off-by: Paul Zimmerman
Cc: Clemens Ladisch
Cc: Daniel Mack
Cc: Greg Kroah-Hartman
Signed-off-by: Takashi Iwai
23 Jun, 2010
1 commit
-
Get rid of the last occurances of _v1 suffixes, and move the version
number right after the "uac" string. Now things are consitent again.Sorry for the forth and back, but it just looks much nicer this way.
Signed-off-by: Daniel Mack
Signed-off-by: Takashi Iwai
01 Jun, 2010
1 commit
-
Audio devices which comply to the UAC2 standard can export complex clock
topologies in its descriptors and set up links between them.The entities that are defined are
- clock sources, which define the end-leafs.
- clock selectors, which act as switch to select one out of many
possible clocks sources.
- clock multipliers, which have an input clock source, and act as clock
source again. They can be used to derive one clock from another.All sample rate changes, clock validity queries and the like must go to
clock source elements, while clock selectors and multipliers can be used
as terminal clock source.The following patch adds a parser for these elements and functions to
iterate over the tree and find the leaf nodes (clock sources).The samplerate set functions were moved to the new clock.c file.
Signed-off-by: Daniel Mack
Signed-off-by: Takashi Iwai
23 Mar, 2010
1 commit
-
Fix build errors when CONFIG_PM is not enabled:
sound/usb/card.c:629: error: 'usb_audio_suspend' undeclared here (not in a function)
sound/usb/card.c:630: error: 'usb_audio_resume' undeclared here (not in a function)Signed-off-by: Randy Dunlap
Signed-off-by: Takashi Iwai
12 Mar, 2010
2 commits
-
For clearer namespace, also rename usbmixer_maps.c -> mixer_maps.c
Signed-off-by: Daniel Mack
Cc: Clemens Ladisch
Signed-off-by: Takashi Iwai -
- Split the audio.h file in two to clearly denote the differences
between the standards.
- Add many more defines to audio-v2.h. Most of them are not currently
used.
- Replaced a magic value with a proper defineSigned-off-by: Daniel Mack
Acked-by: Greg Kroah-Hartman
Cc: Clemens Ladisch
Signed-off-by: Takashi Iwai
05 Mar, 2010
1 commit
-
Clean up the usb audio driver by factoring out a lot of functions to
separate files. Code for procfs, quirks, urbs, format parsers etc all
got a new home now.Moved almost all special quirk handling to quirks.c and introduced new
generic functions to handle them, so the exceptions do not pollute the
whole driver.Renamed usbaudio.c to card.c because this is what it actually does now.
Renamed usbmidi.c to midi.c for namespace clarity.
Removed more things from usbaudio.h.The non-standard drivers were adopted accordingly.
Signed-off-by: Daniel Mack
Cc: Clemens Ladisch
Signed-off-by: Takashi Iwai