23 Oct, 2020
1 commit
-
All avs drivers have now been moved to their corresponding soc specific
directories. Additionally, they don't depend on the POWER_AVS Kconfig
anymore. Therefore, let's simply drop the drivers/power/avs directory
altogether.Cc: Nishanth Menon
Signed-off-by: Ulf Hansson
Reviewed-by: Nishanth Menon
Signed-off-by: Rafael J. Wysocki
21 May, 2019
1 commit
-
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:GPL-2.0-only
Signed-off-by: Thomas Gleixner
Signed-off-by: Greg Kroah-Hartman
11 Aug, 2016
1 commit
-
This moves all power supply drivers from drivers/power/
to drivers/power/supply/. The intention is a cleaner
source tree, since drivers/power/ also contains frameworks
unrelated to power supply, like adaptive voltage scaling.Signed-off-by: Sebastian Reichel
27 Jul, 2016
1 commit
-
Pull power supply and reset updates from Sebastian Reichel:
- introduce reboot mode driver
- add DT support to max8903
- add power supply support for axp221
- misc fixes* tag 'for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: reset: add reboot mode driver
dt-bindings: power: reset: add document for reboot-mode driver
power_supply: fix return value of get_property
power: qcom_smbb: Make an extcon for usb cable detection
max8903: adds support for initiation via device tree
max8903: adds documentation for device tree bindings.
max8903: remove unnecessary 'out of memory' error message.
max8903: removes non zero validity checks on gpios.
max8903: adds requesting of gpios.
max8903: cleans up confusing relationship between dc_valid, dok and dcm.
max8903: store pointer to pdata instead of copying it.
power_supply: bq27xxx_battery: Group register mappings into one table
docs: Move brcm,bcm21664-resetmgr.txt
power/reset: make syscon_poweroff() static
power: axp20x_usb: Add support for usb power-supply on axp22x pmics
power_supply: bq27xxx_battery: Index register numbers by enum
power_supply: bq27xxx_battery: Fix copy/paste error in header comment
MAINTAINERS: Add file patterns for power supply device tree bindings
power: reset: keystone: Enable COMPILE_TEST
30 Jun, 2016
1 commit
-
On these PMICs the usb cable connection/disconnection is
indicated by the usb-valid interrupt being high or low
respectively. Let's make an extcon for that, so we can notify usb
drivers of the cable state.Cc: Bjorn Andersson
Cc: Chanwoo Choi
Signed-off-by: Stephen Boyd
Reviewed-by: Chanwoo Choi
Signed-off-by: Sebastian Reichel
21 Jun, 2016
1 commit
-
instead of defining all functions as static inlines,
let's move them to udc-core and export them with
EXPORT_SYMBOL_GPL, that way we can make sure that
only GPL drivers will use them.As a side effect, it'll be nicer to add tracepoints
to the gadget API.While at that, also fix Kconfig dependencies to
avoid randconfig build failures.Acked-By: Sebastian Reichel
Acked-by: Peter Chen
Signed-off-by: Felipe Balbi
25 Feb, 2016
1 commit
-
This patch adds new driver for Active-semi ACT8945A ActivePath
charger (part of ACT8945A MFD driver) providing power supply class
information to userspace.The driver can be configured through DT (such as, total timer,
precondition timer and input over-voltage threshold).Signed-off-by: Wenyou Yang
Reviewed-by: Krzysztof Kozlowski
[ add "|| COMPILE_TEST" to MFD_ACT8945A dependency ]
Signed-off-by: Sebastian Reichel
08 Dec, 2015
1 commit
-
Currently the reset/power off handlers (POWER_RESET) and Adaptive Voltage
Scaling class (POWER_AVS) are not built when POWER_SUPPLY is disabled.
The POWER_RESET is also not visible in drivers main section of config.However they do not really depend on power supply so they can be built
always. The objects for power supply drivers already depend on
particular Kconfig symbols so there is no need for any changes in
drivers/power/Makefile.This allows selecting POWER_RESET from main drivers config section and
fixes following build warning (encountered on ARM exynos defconfig when
POWER_SUPPLY is disabled manually):warning: (ARCH_HISI && ARCH_INTEGRATOR && ARCH_EXYNOS && ARCH_VEXPRESS && REALVIEW_DT) selects POWER_RESET which has unmet direct dependencies (POWER_SUPPLY)
warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF)
warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON_POWEROFF which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF)Reported-by: Pavel Fedin
Signed-off-by: Krzysztof Kozlowski
Signed-off-by: Sebastian Reichel
05 Dec, 2015
1 commit
-
Separate out I2C functionality into a module. This fixes several small
issues and simplifies the driver initialization.Signed-off-by: Andrew F. Davis
Signed-off-by: Sebastian Reichel
07 Nov, 2015
1 commit
-
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for 88pm860; 88pm80x
- Add support for 24c08 EEPROM; at24
- Add support for Broxton Whiskey Cove; intel*
- Add support for RTS522A; rts5227
- Add support for I2C devices; intel_quark_i2c_gpioNew Functionality:
- Add microphone support; arizona
- Add general purpose switch support; arizona
- Add fuel-gauge support; da9150-core
- Add shutdown support; sec-core
- Add charger support; tps65217
- Add flexible serial communication unit support; atmel-flexcom
- Add power button support; axp20x
- Add led-flash support; rt5033Core Frameworks:
- Supply a generic macro for defining Regmap IRQs
- Rework ACPI child device matchingFix-ups:
- Use Regmap to access registers; tps6105x
- Use DEFINE_RES_IRQ_NAMED() macro; da9150
- Re-arrange device registration order; intel_quark_i2c_gpio
- Allow OF matching; cros_ec_i2c, atmel-hlcdc, hi6421-pmic, max8997, sm501
- Handle deferred probe; twl6040
- Improve accuracy of headphone detect; arizona
- Unnecessary MODULE_ALIAS() removal; bcm590xx, rt5033
- Remove unused code; htc-i2cpld, arizona, pcf50633-irq, sec-core
- Simplify code; kempld, rts5209, da903x, lm3533, da9052, arizona
- Remove #iffery; arizona
- DT binding adaptions; manyBug Fixes:
- Fix possible NULL pointer dereference; wm831x, tps6105x
- Fix 64bit bug; intel_soc_pmic_bxtwc
- Fix signedness issue; arizona"* tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
bindings: mfd: s2mps11: Add documentation for s2mps15 PMIC
mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children
extcon: arizona: Add extcon specific device tree binding document
MAINTAINERS: Add binding docs for Cirrus Logic/Wolfson Arizona devices
mfd: arizona: Remove bindings covered in new subsystem specific docs
mfd: rt5033: Add RT5033 Flash led sub device
mfd: lpss: Add Intel Broxton PCI IDs
mfd: lpss: Add Broxton ACPI IDs
mfd: arizona: Signedness bug in arizona_runtime_suspend()
mfd: axp20x: Add a cell for the power button part of the, axp288 PMICs
mfd: dt-bindings: Document pulled down WRSTBI pin on S2MPS1X
mfd: sec-core: Disable buck voltage reset on watchdog falling edge
mfd: sec-core: Dump PMIC revision to find out the HW
mfd: arizona: Use correct type ID for device tree config
mfd: arizona: Remove use of codec build config #ifdefs
mfd: arizona: Simplify adding subdevices
mfd: arizona: Downgrade type mismatch messages to dev_warn
mfd: arizona: Factor out checking of jack detection state
mfd: arizona: Factor out DCVDD isolation control
mfd: Make TPS6105X select REGMAP_I2C
...
19 Oct, 2015
1 commit
-
I2C is only required when using the config item BATTERY_BQ27XXX_I2C which
already depends on the I2C subsystem, remove the unneeded dependency from
BATTERY_BQ27XXX.Signed-off-by: Andrew F. Davis
Acked-by: Pali Rohár
Signed-off-by: Sebastian Reichel
16 Oct, 2015
1 commit
-
This driver fails to link without CONFIG_IIO, since
there are no stubs for the iio_channels functions.Signed-off-by: Sebastian Reichel
Acked-by: Marek Belisko
Acked-by: Nikolaus Schaller
13 Oct, 2015
1 commit
-
This adds power supply driver support for the Fuel-Gauge part of
the DA9150 combined Charger and Fuel-Gauge device.Signed-off-by: Adam Thomson
Acked-by: Sebastian Reichel
Signed-off-by: Lee Jones
29 Sep, 2015
1 commit
-
This patch adds basic support for bq24250 and bq24251 which are very
similar to the bq24257 the driver was originally written for. Basic
support means the ability to select a device through Kconfig, DT and
ACPI, an instance variable allowing to check which chip is active, and
the reporting back of the selected device through the model_name power
supply sysfs property.This patch by itself is not sufficient to actually use those two added
devices in a real-world setting due to some feature differences which
are addressed by other patches in this series.Signed-off-by: Andreas Dannenberg
Reviewed-by: Krzysztof Kozlowski
Signed-off-by: Sebastian Reichel
25 Sep, 2015
1 commit
-
This patch adds support for the tps65217 charger driver. This driver is
responsible for controlling the charger aspect of the tps65217 mfd.
Currently, this mainly consists of turning on and off the charger, but
some other features of the charger can be supported through this driver.Signed-off-by: Enric Balletbo i Serra
Signed-off-by: Sebastian Reichel
23 Sep, 2015
1 commit
-
Rename functions that are used by multiple devices. New devices
have been added and the function names and driver name are no longer
general enough for the functionality they provide.Signed-off-by: Andrew F. Davis
Acked-by: Tony Lindgren
Acked-by: GUAN Xuetao
Signed-off-by: Sebastian Reichel
22 Sep, 2015
2 commits
-
Add the Qualcomm Switch-Mode Battery Charger and Boost driver, found in
pm8941.Signed-off-by: Courtney Cavin
Signed-off-by: Bjorn Andersson
Signed-off-by: Sebastian Reichel -
This adds a driver for the usb power_supply bits of the axp20x PMICs.
I initially started writing my own driver, before coming aware of
Bruno Prémont's excellent earlier RFC with a driver for this.My driver was lacking CURRENT_MAX and VOLTAGE_MIN support Bruno's
drvier has, so I've copied the code for those from his driver.Note that the AC-power-supply and battery charger bits will need separate
drivers. Each one needs its own devictree child-node so that other
devicetree nodes can reference the right power-supply, and thus each one
will get its own mfd-cell / platform_device and platform-driver.Cc: Bruno Prémont
Acked-by: Lee Jones
Signed-off-by: Bruno Prémont
Signed-off-by: Hans de Goede
Signed-off-by: Sebastian Reichel
05 Aug, 2015
1 commit
-
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.Signed-off-by: Geert Uytterhoeven
Acked-by: Linus Walleij
Signed-off-by: Sebastian Reichel
30 May, 2015
1 commit
-
Based on the datasheet found here:
http://www.richtek.com/download_ds.jsp?p=RT9455Signed-off-by: Anda-Maria Nicolae
Reviewed-by: Krzysztof Kozlowski
Signed-off-by: Sebastian Reichel
24 May, 2015
3 commits
-
This patch adds new power supply charger driver support
for X-Power AXP288 PMIC integrated charger.This driver interfaces with the axp20x mfd driver as a cell
and listens to extcon cable events for setting up charging.Signed-off-by: Ramakrishna Pallala
Acked-by: Lee Jones
Signed-off-by: Sebastian Reichel -
More details about the chip can be found here:
http://www.ti.com/product/bq25890Signed-off-by: Laurentiu Palcu
Reviewed-by: Krzysztof Kozlowski
Signed-off-by: Sebastian Reichel -
Based on the datasheet found here:
http://www.ti.com/lit/ds/symlink/bq24257.pdfSigned-off-by: Laurentiu Palcu
Reviewed-by: Krzysztof Kozlowski
Signed-off-by: Sebastian Reichel
08 Mar, 2015
1 commit
-
New power_supply driver at driver/power which interfaces with the
axp20x mfd driver as a cell. Provides battery info, monitors for
changes, and generates alerts on temperature and capacity issuesSigned-off-by: Todd Brandt
Acked-by: Jacob Pan
Signed-off-by: Sebastian Reichel
26 Feb, 2015
1 commit
-
This patch adds support for DA9150 Charger & Fuel-Gauge IC Charger.
Signed-off-by: Adam Thomson
Signed-off-by: Sebastian Reichel
22 Jan, 2015
3 commits
-
Both the LTC2941 and LTC2943 measure battery capacity.
The LTC2943 is compatible with the LTC2941, it adds voltage and
temperature monitoring, and uses a slightly different conversion
formula for the charge counter.To avoid confusion with e.g. the LTC2945, the driver is called
LTC2941 instead of LTC294X.v2: Fix units of measurement: uV, uA and centidegrees.
v3: Correctly set configuration register. Allow negative values
for the sense resistor.
v4: Run checkpatch.pl and fix all errors and warnings.
v5: Prefix "lltc," to devicetree properties.Signed-off-by: Mike Looijmans
[ removed .owner field ]
Signed-off-by: Sebastian Reichel -
To guerantee proper charing and managing batteries even in suspend,
charger-manager has used rtc device with rtc framework interface.
However, it is better to use alarmtimer for cleaner and more appropriate
operation.
This patch makes driver to use alarmtimer for polling work in suspend and
removes all deprecated codes related with using rtc interface.Signed-off-by: Jonghwa Lee
Signed-off-by: Sebastian Reichel -
This is only a small clean-up. The driver can be built without SYSFS
as there exist stubs for used functions.Signed-off-by: Karol Wrona
Reviewed-by: Krzysztof Kozlowski
Signed-off-by: Sebastian Reichel
20 Jan, 2015
2 commits
-
Add new driver for Maxim 77693 switch-mode charger (part of max77693
MFD driver) providing power supply class information to userspace.The charger has +20V tolerant input. Current input can be set from 0 to
2.58 A. The charger can deliver up to 2.1 A to the battery or 3.5 A to
the system (when supplying additional current from battery to system).The driver is configured through DTS (battery and system related
settings) and sysfs entries (timers and top-off charging threshold).Signed-off-by: Krzysztof Kozlowski
Signed-off-by: Sebastian Reichel -
This patch adds device driver of Richtek PMIC.
The driver support battery fuel gauge. Fuel gauge calculates and determines the
battery state of charge (SOC) according to battery open circuit voltage (OCV).
Also, this driver provides battery average voltage, voltage and battery present
property.Cc: Sebastian Reichel
Cc: Dmitry Eremin-Solenikov
Cc: David Woodhouse
Signed-off-by: Beomho Seo
Acked-by: Chanwoo Choi
Signed-off-by: Sebastian Reichel
25 Sep, 2014
1 commit
-
Make the max14577 charger driver depending on SYSFS instead selecting
it. This fixes warning on x86_64 with allmodconfig:scripts/kconfig/conf --allmodconfig Kconfig
fs/sysfs/Kconfig:1:error: recursive dependency detected!
fs/sysfs/Kconfig:1: symbol SYSFS is selected by CHARGER_MAX14577
drivers/power/Kconfig:327: symbol CHARGER_MAX14577 depends on POWER_SUPPLY
drivers/power/Kconfig:1: symbol POWER_SUPPLY is selected by HID_SONY
drivers/hid/Kconfig:638: symbol HID_SONY depends on NEW_LEDS
drivers/leds/Kconfig:8: symbol NEW_LEDS is selected by SENSORS_APPLESMC
drivers/hwmon/Kconfig:299: symbol SENSORS_APPLESMC depends on HWMON
drivers/hwmon/Kconfig:5: symbol HWMON is selected by EEEPC_LAPTOP
drivers/platform/x86/Kconfig:496: symbol EEEPC_LAPTOP depends on HOTPLUG_PCI
drivers/pci/hotplug/Kconfig:5: symbol HOTPLUG_PCI depends on SYSFSSigned-off-by: Krzysztof Kozlowski
Reported-by: Stephen Rothwell
Signed-off-by: Sebastian Reichel
24 Sep, 2014
2 commits
-
Remove hard-coded values for:
- Fast Charge current,
- End Of Charge current,
- Fast Charge timer,
- Overvoltage Protection Threshold,
- Battery Constant Voltage,
and use DTS or sysfs to configure them. This allows using the max14577 charger
driver with different batteries.Now the charger driver requires valid configuration data from DTS. In
case of wrong configuration data it fails during probe.The fast charge timer is configured through sysfs entry.
Signed-off-by: Krzysztof Kozlowski
Acked-by: Andrew Morton
Signed-off-by: Lee Jones -
Add support for MAX77836 charger to the max14577 driver. The MAX77836
charger is almost the same as 14577 model except:
- No dead-battery detection;
- Support for special charger (like in MAX77693);
- Support for DX over-voltage protection (like in MAX77693);
- Lower values of charging current (two times lower current for
slow/fast charge, much lower EOC current);
- Slightly different values in ChgTyp field of STATUS2 register. On
MAX14577 0x6 is reserved and 0x7 dead battery. On the MAX77836 the
0x6 means special charger and 0x7 is reserved. Regardless of these
differences the driver maps them to one enum max14577_muic_charger_type.Signed-off-by: Krzysztof Kozlowski
Acked-by: Andrew Morton
Signed-off-by: Lee Jones
24 Jul, 2014
1 commit
-
This adds a driver for reading the battery status of the
battery connected to the Atmel microcontroller on the
iPAQ h3xxx series.Based on a driver from handhelds.org 2.6.21 kernel, written
by Alessandro GARDICH.Signed-off-by: Dmitry Artamonow
Signed-off-by: Linus Walleij
Signed-off-by: Sebastian Reichel
26 Jan, 2014
1 commit
-
Pull networking updates from David Miller:
1) BPF debugger and asm tool by Daniel Borkmann.
2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.
3) Correct reciprocal_divide and update users, from Hannes Frederic
Sowa and Daniel Borkmann.4) Currently we only have a "set" operation for the hw timestamp socket
ioctl, add a "get" operation to match. From Ben Hutchings.5) Add better trace events for debugging driver datapath problems, also
from Ben Hutchings.6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we
have a small send and a previous packet is already in the qdisc or
device queue, defer until TX completion or we get more data.7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.
8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
Borkmann.9) Share IP header compression code between Bluetooth and IEEE802154
layers, from Jukka Rissanen.10) Fix ipv6 router reachability probing, from Jiri Benc.
11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.
12) Support tunneling in GRO layer, from Jerry Chu.
13) Allow bonding to be configured fully using netlink, from Scott
Feldman.14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
already get the TCI. From Atzm Watanabe.15) New "Heavy Hitter" qdisc, from Terry Lam.
16) Significantly improve the IPSEC support in pktgen, from Fan Du.
17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom
Herbert.18) Add Proportional Integral Enhanced packet scheduler, from Vijay
Subramanian.19) Allow openvswitch to mmap'd netlink, from Thomas Graf.
20) Key TCP metrics blobs also by source address, not just destination
address. From Christoph Paasch.21) Support 10G in generic phylib. From Andy Fleming.
22) Try to short-circuit GRO flow compares using device provided RX
hash, if provided. From Tom Herbert.The wireless and netfilter folks have been busy little bees too.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
net/cxgb4: Fix referencing freed adapter
ipv6: reallocate addrconf router for ipv6 address when lo device up
fib_frontend: fix possible NULL pointer dereference
rtnetlink: remove IFLA_BOND_SLAVE definition
rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
qlcnic: update version to 5.3.55
qlcnic: Enhance logic to calculate msix vectors.
qlcnic: Refactor interrupt coalescing code for all adapters.
qlcnic: Update poll controller code path
qlcnic: Interrupt code cleanup
qlcnic: Enhance Tx timeout debugging.
qlcnic: Use bool for rx_mac_learn.
bonding: fix u64 division
rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
sfc: Use the correct maximum TX DMA ring size for SFC9100
Add Shradha Shah as the sfc driver maintainer.
net/vxlan: Share RX skb de-marking and checksum checks with ovs
tulip: cleanup by using ARRAY_SIZE()
ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
net/cxgb4: Don't retrieve stats during recovery
...
16 Jan, 2014
1 commit
-
On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.drivers/built-in.o: In function `goldfish_battery_probe':
drivers/power/goldfish_battery.c:181: undefined reference to `devm_ioremap'Signed-off-by: Richard Weinberger
Signed-off-by: David S. Miller
24 Dec, 2013
1 commit
-
MAX14577 chip is a multi-function device which includes MUIC, charger and
voltage regulator. The driver is located in drivers/mfd.This patch supports battery charging control of MAX14577 chip and provides
power supply class information to userspace.Signed-off-by: Krzysztof Kozlowski
Signed-off-by: Kyungmin Park
Signed-off-by: Anton Vorontsov
02 Dec, 2013
1 commit
-
max17042 now uses regmap interface but does not enable config option. This
patch fixes the following build errors:drivers/power/max17042_battery.c:661:15: error: variable ‘max17042_regmap_config’ has initializer but incomplete type
drivers/power/max17042_battery.c:662:2: error: unknown field ‘reg_bits’ specified in initializer
drivers/power/max17042_battery.c:662:2: warning: excess elements in struct initializer
drivers/power/max17042_battery.c:662:2: warning: (near initialization for ‘max17042_regmap_config’)
drivers/power/max17042_battery.c:663:2: error: unknown field ‘val_bits’ specified in initializer
drivers/power/max17042_battery.c:663:2: warning: excess elements in struct initializer
drivers/power/max17042_battery.c:663:2: warning: (near initialization for ‘max17042_regmap_config’)
drivers/power/max17042_battery.c:664:2: error: unknown field ‘val_format_endian’ specified in initializer
drivers/power/max17042_battery.c:664:23: error: ‘REGMAP_ENDIAN_NATIVE’ undeclared here (not in a function)
drivers/power/max17042_battery.c:664:2: warning: excess elements in struct initializer
drivers/power/max17042_battery.c:664:2: warning: (near initialization for ‘max17042_regmap_config’)
drivers/power/max17042_battery.c: In function ‘max17042_probe’:
drivers/power/max17042_battery.c:684:2: error: implicit declaration of function ‘devm_regmap_init_i2c’Signed-off-by: Austin Boyle
Acked-by: Jonghwa Lee
Signed-off-by: Anton Vorontsov
26 Oct, 2013
1 commit
-
Adds support for the bq24735 charger chipset. The bq24735 is a
high-efficiency, synchronous battery charger.It allows control of the charging current, input current, and the charger
voltage DAC's through SMBus.Signed-off-by: Darbha Sriharsha
Signed-off-by: Rhyland Klein
Thanks-to: Stephen Warren
Thanks-to: Thierry Reding
Thanks-to: Manish Badarkhe
Signed-off-by: Anton Vorontsov
13 Sep, 2013
1 commit
-
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.Signed-off-by: Martin Schwidefsky