22 Mar, 2006
1 commit
-
Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver
Replace snd_xxx_t typedefs with explicit structs.
Signed-off-by: Takashi Iwai
21 Mar, 2006
3 commits
-
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (230 commits)
[SPARC64]: Update defconfig.
[SPARC64]: Fix 2 bugs in huge page support.
[SPARC64]: CONFIG_BLK_DEV_RAM fix
[SPARC64]: Optimized TSB table initialization.
[SPARC64]: Allow CONFIG_MEMORY_HOTPLUG to build.
[SPARC64]: Use SLAB caches for TSB tables.
[SPARC64]: Don't kill the page allocator when growing a TSB.
[SPARC64]: Randomize mm->mmap_base when PF_RANDOMIZE is set.
[SPARC64]: Increase top of 32-bit process stack.
[SPARC64]: Top-down address space allocation for 32-bit tasks.
[SPARC64] bbc_i2c: Fix cpu check and add missing module license.
[SPARC64]: Fix and re-enable dynamic TSB sizing.
[SUNSU]: Fix missing spinlock initialization.
[TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts.
[SPARC64]: First cut at VIS simulator for Niagara.
[SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check.
[SPARC64]: Add SMT scheduling support for Niagara.
[SPARC64]: Fix 32-bit truncation which broke sparsemem.
[SPARC64]: Move over to sparsemem.
[SPARC64]: Fix new context version SMP handling.
... -
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (150 commits)
[PATCH] ipw2100: Update version ipw2100 stamp to 1.2.2
[PATCH] ipw2100: move mutex.h include from ipw2100.c to ipw2100.h
[PATCH] ipw2100: semaphore to mutexes conversion
[PATCH] ipw2100: Fix radiotap code gcc warning
[PATCH] ipw2100: add radiotap headers to packtes captured in monitor mode
[PATCH] ipw2x00: expend Copyright to 2006
[PATCH] drivers/net/wireless/ipw2200.c: fix an array overun
[PATCH] ieee80211: Don't update network statistics from off-channel packets.
[PATCH] ipw2200: Update ipw2200 version stamp to 1.1.1
[PATCH] ipw2200: switch to the new ipw2200-fw-3.0 image format
[PATCH] ipw2200: wireless extension sensitivity threshold support
[PATCH] ipw2200: Enables the "slow diversity" algorithm
[PATCH] ipw2200: Set a meaningful silence threshold value
[PATCH] ipw2200: export `debug' module param only if CONFIG_IPW2200_DEBUG
[PATCH] ipw2200: Change debug level for firmware error logging
[PATCH] ipw2200: Filter unsupported channels out in ad-hoc mode
[PATCH] ipw2200: Fix ipw_sw_reset() implementation inconsistent with comment
[PATCH] ipw2200: Fix rf_kill is activated after mode change with 'disable=1'
[PATCH] ipw2200: remove the WPA card associates to non-WPA AP checking
[PATCH] ipw2200: Add signal level to iwlist scan output
... -
* 'block-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/block:
[PATCH] fix rmmod problems with elevator attributes, clean them up
[PATCH] elevator_t lifetime rules and sysfs fixes
[PATCH] noise removal: cfq-iosched.c
[PATCH] don't bother with refcounting for cfq_data
[PATCH] fix sysfs interaction and lifetime rules handling for queues
[PATCH] regularize blk_cleanup_queue() use
[PATCH] fix cfq_get_queue()/ioprio_set(2) races
[PATCH] deal with rmmod/put_io_context() races
[PATCH] stop elv_unregister() from rogering other iosched's data, fix locking
[PATCH] stop cfq from pinning queue down
[PATCH] make cfq_exit_queue() prune the cfq_io_context for that queue
[PATCH] fix the exclusion for ioprio_set()
[PATCH] keep sync and async cfq_queue separate
[PATCH] switch to use of ->key to get cfq_data by cfq_io_context
[PATCH] stop leaking cfq_data in cfq_set_request()
[PATCH] fix cfq hash lookups
[PATCH] fix locking in queue_requests_store()
[PATCH] fix double-free in blk_init_queue_node()
[PATCH] don't do exit_io_context() until we know we won't be doing any IO
20 Mar, 2006
16 commits
-
Should allow cheetah_plus cpu types and don't taint
the kernel.Signed-off-by: David S. Miller
-
Caught by CONFIG_DEBUG_SPINLOCK.
Signed-off-by: David S. Miller
-
Sun does't put an SEEPROM behind the tigon3 chip, among other things,
so accesses to these areas just give bus timeouts.Signed-off-by: David S. Miller
-
Because we play this trick where we use ttyS? in increasing minor
numbers for different sunfoo.c drivers, we have to inform the TTY
layer of this.Do so by setting the tty->name_base appropriately.
Probably there should be a generic way to do this in the serial core,
but for now...Signed-off-by: David S. Miller
-
Caller takes the lock already.
Also, fixup the poll loop in sunhv_break_ctl(). Just
like in console write, we udelay(2) and use a loop
limit of 1000000 iterations.Signed-off-by: David S. Miller
-
So that it will show up as /dev/ttyS0. Otherwise things like
installers will try to run on whatever serial port gets probed
first.Signed-off-by: David S. Miller
-
By calling uart_handle_break(). We'll still do the
"sun_do_break()" handling if the user gives two
breaks in a row.We should probably do this in the other Sparc serial
drivers too.Signed-off-by: David S. Miller
-
Until the uart is openned, port->info is NULL.
Also, init the port->irq properly and give a non-zero
port->membase so that the uart device reporting is done.Signed-off-by: David S. Miller
-
Need to translate through the interrupt-map{,-mask] properties.
Signed-off-by: David S. Miller
-
Add udelay to polling console write loop, and increment
the loop limit.Name the device "ttyHV" and pass that to add_preferred_console()
when we're using hypervisor console.Kill sunhv_console_setup(), it's empty.
Handle the case where we don't want to use hypervisor console.
(ie. we have a head attached to a sun4v machine)Signed-off-by: David S. Miller
-
Signed-off-by: David S. Miller
-
If the console is not for a particular Sun serial
controller, set the drv->cons to NULL.Signed-off-by: David S. Miller
-
Since it can do things like BREAK and HUP, we implement
this as a serial uart driver.This still needs interrupt probing code, as I haven't figured
out how interrupts will work or be probed for on SUN4V yet.Signed-off-by: David S. Miller
-
The 40-bit DMA workaround recently implemented for 5714, 5715, and
5780 needs to be expanded because there may be other tg3 devices
behind the EPB Express to PCIX bridge in the 5780 class device.For example, some 4-port card or mother board designs have 5704 behind
the 5714.All devices behind the EPB require the 40-bit DMA workaround.
Thanks to Chris Elmquist again for reporting the problem and testing
the patch.Signed-off-by: Michael Chan
Signed-off-by: David S. Miller
19 Mar, 2006
3 commits
-
Signed-off-by: Al Viro
-
VIDEO_CX88_ALSA should not be between VIDEO_CX88_DVB and
VIDEO_CX88_DVB_ALL_FRONTENDSWhen cx88-alsa was added to cx88/Kconfig, it was added in between
VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS. This caused
undesireable effects to the appearance of the menu options in
menuconfig.This fix reorders cx88-alsa and cx88-dvb in Kconfig, to match saa7134,
and restore the correct menuconfig appearance.Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Linus Torvalds -
Fixed em28xx based system lockup, device needs to be initialized before
starting the isoc transfer otherwise the system will completly lock up.Signed-off-by: Markus Rechberger
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Linus Torvalds
18 Mar, 2006
17 commits
-
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
semaphore to mutexes conversion.
the conversion was generated via scripts, and the result was validated
automatically via a script as well.build-tested.
Signed-off-by: Ingo Molnar
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
Fix gcc warning: ipw2100.c:2460: ISO C90 forbids mixed declarations and code
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
Signed-off-by: Stefan Rompf
Signed-off-by: Andrea Merello
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
This patch fixes a big array overun found by the Coverity checker.
Signed-off-by: Adrian Bunk
Signed-off-by: John W. Linville -
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
This patch modifies the driver to support the ipw2200-fw-3.0 image format.
The 3.0 fw image does not add any new capabilities, but as a result of
image format changes, it should fix two problems experienced by users:1) Race conditions with the request_firmware interface and udev/hotplug
are improved as only a single request_firmware call is now required to
load the firmware and microcode (vs. 3 separate calls previously)2) The monitor mode firmware (sniffer) is now packaged with the correct
boot image so it can now function without frequent restarts.Note: Once you apply this patch, you will also need to upgrade your
firmware image to the 3.0 version available from:http://ipw2200.sf.net/firmware.php
Signed-off-by: James Ketrenos
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
The patch allows the user to set the handover threshold, i.e. the number
of consecutively missed beacons that will trigger a roaming attempt. The
disassociation threshold is set to 3 times the handover threshold.Signed-off-by: Olivier Hochreutiner
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
This forces one antenna or the other, if the background noise is
significantly quieter in one than the other. It favors the quieter
antenna, and won't kick in unless the difference is significant.Signed-off-by: Cahill, Ben M
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
Set a meaningful silence threshold value (replacing our previous "0"
default), which gets rid of the gratuitous "Link deterioration"
notifications that we've been receiving from firmware. This
notification feature tells the driver information to help it determine
when to pre-emptively restart the firmware/ucode in anticipation of
firmware errors! But since setting this new threshold, I haven't seen
any such notifications. At least it keeps the logs a little less busy.Signed-off-by: Cahill, Ben M
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
Currently iwlist ethX freq[uency]/channel lists all the channels the card
supported for the current region, which includes some channels can only
be used in infrastructure mode. This patch filters these channels out if
the card is currently in ad-hoc mode.Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville -
When loading the ipw2200 module with disabled=1, rf_kill is activated after
every mode change. This is caused by ipw_sw_reset() is called when a mode
is changed. The patch fixed the problem by distinguishing the purposes with
the 'option' paramenter.Signed-off-by: Zhu Yi
Signed-off-by: John W. Linville
