01 Mar, 2016
1 commit
-
With igore pm notify feature, MMC core will not re-detect card
after system suspend/resume. This is needed for some special cards
like Broadcom WiFi which can't work propertly on card re-detect
after system resume.Signed-off-by: Dong Aisheng
16 Feb, 2016
1 commit
-
bcmdhd can't support removing host during suspend and
driver crash when detect card after resume due to no response
to CMD7.
It looks bcmdhd has a special requirement to enumerate card
by itself which is incompatible with current MMC core.
So implement post-cd feature to allow driver to detect card
as it wants, then we add back non-removable capability
to avoid MMC core to redetect card after resume.root@imx6qdlsolo:~# echo standby > /sys/power/state
PM: Syncing filesystems ... done.
PM: Preparing system for standby sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering standby sleep
evbug: Event. Dev: input3, Type: 0, Code: 0, Value: 1
evbug: Event. Dev: input2, Type: 0, Code: 0, Value: 1
PM: suspend of devices complete after 652.363 msecs
PM: suspend devices took 0.660 seconds
PM: late suspend of devices complete after 1.148 msecs
PM: noirq suspend of devices complete after 1.043 msecs
Disabling non-boot CPUs ...
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1 is up
PM: noirq resume of devices complete after 0.534 msecs
PM: early resume of devices complete after 0.553 msecs
evbug: Event. Dev: input2, Type: 1, Code: 116, Value: 1
evbug: Event. Dev: input2, Type: 0, Code: 0, Value: 0
evbug: Event. Dev: input2, Type: 1, Code: 116, Value: 0
evbug: Event. Dev: input2, Type: 0, Code: 0, Value: 0
mmc1: error -110 during resume (card was removed?)
PM: resume of devices complete after 605.525 msecs
PM: resume devices took 0.610 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
WARNING: driver bcmsdh_sdmmc did not remove its interrupt handler!
root@imx6qdlsolo:~# Unable to handle kernel NULL pointer dereference at virtual address 0000022c
pgd = 80004000
[0000022c] *pgd=00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in: bcmdhd evbug ov5647_camera_mipi mxc_mipi_csi mx6s_capture
CPU: 1 PID: 780 Comm: kworker/u4:4 Not tainted 4.1.15-01434-g70f4b36 #1310
Hardware name: Freescale i.MX7 Dual (Device Tree)
Workqueue: kmmcd mmc_rescan
task: a974af80 ti: a846e000 task.ti: a846e000
PC is at _raw_spin_lock_irqsave+0x1c/0x5c
LR is at get_parent_ip+0x10/0x2c
pc : [] lr : [] psr: 60050093
sp : a846fc20 ip : 0001001f fp : a800b000
r10: 00000000 r9 : 00000001 r8 : 0000022c
r7 : 00000002 r6 : 0000022c r5 : a0050013 r4 : 0000022c
r3 : a974af80 r2 : 00000001 r1 : a846fc44 r0 : 00000000
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c53c7d Table: a951406a DAC: 00000015
Process kworker/u4:4 (pid: 780, stack limit = 0xa846e210)
Stack: (0xa846fc20 to 0xa8470000)
fc20: 00000000 a846fc50 a846fc44 80061808 00000000 000001dc 00000000 805037fc
fc40: 8d89d5ec 00000000 a974af80 80053e88 00000000 00000000 ab7293c0 00000000
fc60: 7f09c828 000000c9 7f09c828 a916a804 00000001 0001001f a800b000 7f0698a4
fc80: a974afc8 00000001 00000000 00000000 00012ebc a974af80 00000001 80ad46c0
fca0: a974af80 00000000 a8eeccc0 00000001 0001001f a846fd04 00000000 7f099440
fcc0: a800b000 7f0699c4 a846fcdf 00000000 00000001 7f068834 a937c900 0105c688
fce0: a846fd04 a8e20000 00000000 00000001 00000000 7f071f08 a846fd04 a80a0000
fd00: ffffffff 00000000 ffffffff a8e20000 a8e20000 00000000 7f099440 00000000
fd20: 00000000 7f099440 a800b000 7f072f4c a974af80 00000000 00000000 80778564
fd40: a846fd54 a9346550 80330028 00000001 a846e000 a8e20000 7f099440 00000000
fd60: 18005000 a8eeccc0 00000000 7f099440 a800b000 7f073744 a846fd8c 80052130
fd80: a9273898 00000000 a800b000 a8e20000 7f099440 00000001 a8eec200 a9270000
fda0: 00000000 7f099440 a800b000 7f07cd3c 80b81100 8040003f a800b000 00000000
fdc0: 00000000 a8e20000 7f099440 a9270000 a9273000 a9270000 00000000 7f099440
fde0: a800b000 7f02df4c 00000001 a8e20000 7f099440 a8eec200 00000000 a916e008
fe00: 00000000 a90bfb00 a800b000 7f074cbc a9270000 7f099440 a8e20000 00000000
fe20: a8f81610 7f0765ec 7f0765b0 a8eeccc0 a855df40 7f069310 a916a800 a8eec200
fe40: 7f09b414 7f06a950 7f06a908 a8f81608 a8f81600 8050e8b8 a8f81608 7f09b414
fe60: 80b22c70 80379744 a974af80 a8f8163c a8f81608 803797d4 00000005 a81ce930
fe80: a8f81608 8037923c a8f81608 a8f81608 80b93cf4 80376504 a846fea0 800e0e3c
fea0: 00000000 00000000 a8f81608 000000bd a833f000 00000000 00000000 8050ed04
fec0: 00000001 8050dd8c 400f8c0f a833f000 ffffff92 a833f000 a81ce600 8050de30
fee0: 8050ddbc a833f240 a833f1dc 80506048 a90bfb00 a833f240 a800b000 a81ce600
ff00: 00000000 800462f0 a81ce600 80043c94 00000000 a800b000 a90bfb18 a800b014
ff20: a846e000 00000088 80b39379 a90bfb00 a800b000 8004654c 80ad4100 a800b164
ff40: a90bfb00 00000000 a84856c0 a90bfb00 80046500 00000000 00000000 00000000
ff60: 00000000 8004b1e8 2df9acc7 00000000 b5f3ff89 a90bfb00 00000000 00000000
ff80: a846ff80 a846ff80 00000000 00000000 a846ff90 a846ff90 a846ffac a84856c0
ffa0: 8004b10c 00000000 00000000 8000f568 00000000 00000000 00000000 00000000
ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ecd61557 f82769f5
[] (_raw_spin_lock_irqsave) from [] (add_wait_queue+0x20/0x48)
[] (add_wait_queue) from [] (__mmc_claim_host+0x58/0x1b0)
[] (__mmc_claim_host) from [] (sdioh_request_byte+0x1cc/0x2a4 [bcmdhd])
[] (sdioh_request_byte [bcmdhd]) from [] (sdioh_cfg_write+0x20/0x28 [bcmdhd])
[] (sdioh_cfg_write [bcmdhd]) from [] (bcmsdh_cfg_write+0x90/0xdc [bcmdhd])
[] (bcmsdh_cfg_write [bcmdhd]) from [] (dhdsdio_clk_kso_enab+0x38/0x168 [bcmdhd])
[] (dhdsdio_clk_kso_enab [bcmdhd]) from [] (dhdsdio_clk_devsleep_iovar+0xf4/0x5f4 [bcmdhd])
[] (dhdsdio_clk_devsleep_iovar [bcmdhd]) from [] (dhdsdio_bussleep+0x2f8/0x4dc [bcmdhd])
[] (dhdsdio_bussleep [bcmdhd]) from [] (dhd_bus_stop+0x2e8/0x3f0 [bcmdhd])
[] (dhd_bus_stop [bcmdhd]) from [] (dhd_detach+0x2a4/0x438 [bcmdhd])
[] (dhd_detach [bcmdhd]) from [] (dhdsdio_release+0x4c/0x1dc [bcmdhd])
[] (dhdsdio_release [bcmdhd]) from [] (dhdsdio_disconnect+0x3c/0xa0 [bcmdhd])
[] (dhdsdio_disconnect [bcmdhd]) from [] (bcmsdh_remove+0x3c/0x60 [bcmdhd])
[] (bcmsdh_remove [bcmdhd]) from [] (bcmsdh_sdmmc_remove+0x48/0x60 [bcmdhd])
[] (bcmsdh_sdmmc_remove [bcmdhd]) from [] (sdio_bus_remove+0x30/0xf8)
[] (sdio_bus_remove) from [] (__device_release_driver+0x70/0xe4)
[] (__device_release_driver) from [] (device_release_driver+0x1c/0x28)
[] (device_release_driver) from [] (bus_remove_device+0xd8/0x104)
[] (bus_remove_device) from [] (device_del+0x10c/0x210)
[] (device_del) from [] (sdio_remove_func+0x1c/0x28)
[] (sdio_remove_func) from [] (mmc_sdio_remove+0x40/0x70)
[] (mmc_sdio_remove) from [] (mmc_sdio_detect+0x74/0x100)
[] (mmc_sdio_detect) from [] (mmc_rescan+0xb8/0x314)
[] (mmc_rescan) from [] (process_one_work+0x120/0x330)
[] (process_one_work) from [] (worker_thread+0x4c/0x480)
[] (worker_thread) from [] (kthread+0xdc/0xf4)
[] (kthread) from [] (ret_from_fork+0x14/0x2c)
Code: f10c0080 e3a00001 ebe359b1 f594f000 (e1943f9f)Signed-off-by: Dong Aisheng
(cherry picked from commit 8f998ca4d07aa93460ac7769c1f2b3be0c36fc78)
19 Jan, 2016
1 commit
-
The delay cells of some SoCs may have less delay value of one cell,
for such SoCs, user could set a start delay cell point to skip
a few meaningless tuning cells.Signed-off-by: Dong Aisheng
15 Jan, 2016
37 commits
-
Change behavior during registration of gadgets and
gadget drivers in udc-core. Instead of previous
approach when for successful probe of usb gadget driver
at least one usb gadget should be already registered
use another one where gadget drivers and gadgets
can be registered in udc-core independently.Independent registration of gadgets and gadget drivers
is useful for built-in into kernel gadget and gadget
driver case - because it's possible that gadget is
really probed only on late_init stage (due to deferred
probe) whereas gadget driver's probe is silently failed
on module_init stage due to no any UDC added.Also it is useful for modules case - now there is no
difference what module to insert first: gadget module
or gadget driver one.Tested-by: Maxime Ripard
Signed-off-by: Ruslan Bilovol
[simplified code as requested by Alan Stern and Felipe Balbi,
fixed checkpatch issues]
Signed-off-by: Marek Szyprowski
Tested-by: Peter Chen
Signed-off-by: Felipe Balbi -
Now when last user of usb_udc_attach_driver() is switched
to passing UDC name via usb_gadget_driver struct, it's safe
to remove this functionTested-by: Maxime Ripard
Signed-off-by: Ruslan Bilovol
Signed-off-by: Marek Szyprowski
Tested-by: Peter Chen
Signed-off-by: Felipe Balbi -
Introduce new 'udc_name' member to usb_gadget_driver structure.
The 'udc_name' is a name of UDC that usb_gadget_driver should
be bound to. If udc_name is NULL, it will be bound to any
available UDC.Tested-by: Maxime Ripard
Signed-off-by: Ruslan Bilovol
Signed-off-by: Marek Szyprowski
Tested-by: Peter Chen
Signed-off-by: Felipe Balbi -
Move the x86_64 idle notifiers originally by Andi Kleen and Venkatesh
Pallipadi to generic.Change-Id: Idf29cda15be151f494ff245933c12462643388d5
Acked-by: Nicolas Pitre
Signed-off-by: Todd Poynor -
Tracing adds actual speed since this is expected to be key to the
choice of target speed.Change-Id: Iec936102d0010c4e9dfa143c38a9fd0d551189c3
Signed-off-by: Todd Poynor -
Not useful to have a separate, non-realtime workqueue for speed down
events, avoid priority inversion for speed up events.Change-Id: Iddcd05545245c847aa1bbe0b8790092914c813d2
Signed-off-by: Todd Poynor -
Change-Id: Icf1e86d2065cc8f0816ba9c6b065eb056d4e8249
Signed-off-by: Todd Poynor -
The explicit hint on/off version.
Change-Id: Ibf62b6d45bf6fb8c9c055b9bdaf074ce9374c04f
Signed-off-by: Todd Poynor -
Based on previous patches by Tero Kristo ,
Brian Steuer ,
David Ng ,
Antti P Miettinen , and
Thomas RenningerChange-Id: Ic55fedcf6f9310f43a7022fb88e23b0392122769
Signed-off-by: Todd Poynor -
Change-Id: Ic13614a3da2faa2d4bd215ca3eb7191614f0cf66
Signed-off-by: Todd Poynor -
This governor is designed for latency-sensitive workloads, such as
interactive user interfaces. The interactive governor aims to be
significantly more responsive to ramp CPU quickly up when CPU-intensive
activity begins.Existing governors sample CPU load at a particular rate, typically
every X ms. This can lead to under-powering UI threads for the period of
time during which the user begins interacting with a previously-idle system
until the next sample period happens.The 'interactive' governor uses a different approach. Instead of sampling
the CPU at a specified rate, the governor will check whether to scale the
CPU frequency up soon after coming out of idle. When the CPU comes out of
idle, a timer is configured to fire within 1-2 ticks. If the CPU is very
busy from exiting idle to when the timer fires then we assume the CPU is
underpowered and ramp to MAX speed.If the CPU was not sufficiently busy to immediately ramp to MAX speed, then
the governor evaluates the CPU load since the last speed adjustment,
choosing the highest value between that longer-term load or the short-term
load since idle exit to determine the CPU speed to ramp to.A realtime thread is used for scaling up, giving the remaining tasks the
CPU performance benefit, unlike existing governors which are more likely to
schedule rampup work to occur after your performance starved tasks have
completed.The tuneables for this governor are:
/sys/devices/system/cpu/cpufreq/interactive/min_sample_time:
The minimum amount of time to spend at the current frequency before
ramping down. This is to ensure that the governor has seen enough
historic CPU load data to determine the appropriate workload.
Default is 80000 uS.
/sys/devices/system/cpu/cpufreq/interactive/go_maxspeed_load
The CPU load at which to ramp to max speed. Default is 85.Change-Id: Ib2b362607c62f7c56d35f44a9ef3280f98c17585
Signed-off-by: Mike Chan
Signed-off-by: Todd Poynor
Bug: 3152864 -
The management data input/output (MDIO) bus where often high-speed,
open-drain operation is required. i.MX7D TO1.0 ENET MDIO pin has no
open drain as IC ticket number: TKT252980, i.MX7D TO1.1 fix the issue.Signed-off-by: Fugang Duan
(cherry picked from commit: a747abd5f01d278b91d1b6ee6628e1935cb7b23c)Conflicts:
arch/arm/mach-imx/mach-imx7d.c -
When HDCP running in repeater mode,
HDCP software workaround "HW_WA_HDCP_DC0" is working in
HDCP keepout window stop state.
It will cause HDCP compliance test 1B-01A failed.
So active HDCP keepout widows and 1B-01A is passed.Signed-off-by: Sandor Yu
-
3 uapi header files(mxc_sim_interface.h, pxp_dma.h, pxp_device.h)
cannot be installed by the command "make headers_install" because
they are not in Kbuild list, which impacts the linux-test build.This patch adds the 3 header files in Kbuild list.
Signed-off-by: Gao Pan
-
Fix the out of bounds write, and the dereference before
null check.Signed-off-by: Richard Zhu
(cherry picked from commit 775ff0727166535e9b1ba1f70167e6a33fee5f13) -
This patch adds the DDR(or DTR) quad read support for the Micron
SPI NOR flash.Signed-off-by: Han Xu
-
This patch adds the DDR quad read support by the following:
[1] add SPI_NOR_DDR_QUAD read mode.
[2] add DDR Quad read opcodes:
SPINOR_OP_READ_1_4_4_D / SPINOR_OP_READ4_1_4_4_D[3] add set_ddr_quad_mode() to initialize for the DDR quad read.
Currently it only works for Spansion NOR.[3] about the dummy cycles.
We set the dummy with 8 for DDR quad read by default.
The m25p80.c can not support the DDR quad read, but the SPI NOR controller
can set the dummy value in its child DT node, and the SPI NOR framework
can parse it out.Signed-off-by: Han Xu
-
We need the SPI NOR child node to store some specific features, such as the
dummy cycles for the DDR Quad read.But now, we only have the @dev field in the spi_nor{}. The @dev may points to a
spi_device{} for m25p80, while it may points to a platform_deivice{} for the
SPI NOR controller, such as fsl_quadspi.c.It is not convenient for us to get come information from the SPI NOR flash.
This patch adds a new field @np to spi_nor{}, it points to the child node for
the SPI NOR flash.Signed-off-by: Huang Shijie
(cherry picked from commit 9b4c87e0756093a04eb0948396928c8adbd1ee08) -
HNP polling need a one byte buffer for usb control transfer via DMA read,
currently using a data field in a structure for DMA buffer may cause cache
incoherent issue, because the cache line for the DMA buffer also contains
other data in this structure, while dma from device is outstanding, the
access on other data in the same cache line will cause we get the old data
before DMA. This patch change the host_request_flag to be a pointer, its
memory will be allocated through kmalloc by controller driver, with this
way, the DMA buffer can be properly aligned and padded.Signed-off-by: Li Jun
-
- Replace all "transceiver" with "phy"
- Replace one "OTG controller" with "phy"Signed-off-by: Peter Chen
Signed-off-by: Felipe Balbi -
Add set_pretimeout since our watchdog driver has those interfaces and
obviously, the new common watchdog framework didn't implement this interface.Signed-off-by: Robin Gong
-
It's used for transceiver_switch.
NOTE: it's newly added since it's deleted by upstream before.
However, the driver is still using it, so have to add it.Signed-off-by: Dong Aisheng
(cherry picked from commit 53109634188e672b807a7256afbf10db0d9a6574) -
cherry-pick below patch:
ENGR00275004-4: power: sabresd_battery: add sabresd_battery driverAdd sabresd battery driver which based on Max8903 charger IC.
Signed-off-by: Robin Gong
(cherry picked from commit 19ac2dfcd1e0ea3f1ae231cfc230315eaa9a41be)
(cherry picked from commit b9e81012c21d3318a633a4447797e4a52676c760) -
Initial the mxc mipi dsi driver.
Baseline copied from imx_3.14.y branch.Signed-off-by: Sandor Yu
-
Initial the mxc dcic driver.
Baseline copied from imx_3.14.y branch.Signed-off-by: Sandor Yu
-
In order to workaround the PRE SoC bug recorded by errata ERR009624, the
software cannot write the PRE_CTRL register when the PRE writes the PRE_CTRL
register automatically to set the ENABLE bit(bit0) to 1 in the PRE repeat mode.The software mechanism to set the PRE_CTRL register is different for PRE Y
resolution higher than 9 lines and lower than or equal to 9 lines.For cases in which Y resolution is higher than 9 lines, before we update PRE
shadow, we just need to wait until the PRE store engine status runs out of
the problematic PRE automatic writing window.While for cases in which Y resolutin is lower than or equal to 9 lines, we
have to update PRE shadow in the buffer flip interrupt handler.Signed-off-by: Liu Ying
(cherry picked from commit bd9c14e24aaf67926dfd31bd819ab0c87129fe4b) -
In order to workaround the PRE SoC bug recorded by errata ERR009624, the
software cannot write the PRE_CTRL register when the PRE writes the PRE_CTRL
register automatically to set the ENABLE bit(bit0) to 1 in the PRE repeat mode.The software mechanism to set the PRE_CTRL register is different for PRE Y
resolution higher than 9 lines and lower than or equal to 9 lines. So,
this patch defines the small Y resolution and adds a helper to check the
Y resolution.Signed-off-by: Liu Ying
(cherry picked from commit cf7df46e3b1d2142ff354498982194247bf07fea) -
In order to workaround the PRE SoC bug recorded by errata ERR009624, the
software cannot write the PRE_CTRL register when the PRE writes the PRE_CTRL
register automatically to set the ENABLE bit(bit0) to 1 in the PRE repeat mode.This patch exports a function to set the PRE_CTRL register so that it could be
used by the software when the PRE automatic writing doesn't happen for sure.Signed-off-by: Liu Ying
(cherry picked from commit e64bbcd9243a17f9eba9cb3abb6f2c1939eae110) -
As with gpio, uart and others, allow specifying the name_idx via the
aliases-node in the devicetree.On embedded devices, there is often a combination of removable (e.g.
SD card) and non-removable mmc devices (e.g. eMMC).
Therefore the name_idx might change depending on
- host of removable device
- removable card present or notThis makes it difficult to hard code the root device, if it is on the
non-removable device. E.g. if SD card is present eMMC will be mmcblk1,
if SD card is not present at boot, eMMC will be mmcblk0.If the aliases-node is not found, the driver will act as before.
The original patch is from here:
https://www.mail-archive.com/linux-mmc@vger.kernel.org/msg26472.htmlThe patch requires additional alias_id fix or it won't work.
Because according to function definition the max_idx parameter of idx_alloc
is exclusive, so need add 1 or it will be unable to find the proper idx
within an invalid range.Signed-off-by: Sascha Hauer
Signed-off-by: Dong Aisheng
(cherry picked from commit 35928d6c6a76a24a16edfa636f4c08293614a1e0) -
of_alias_max_index will return the maximum number for which an
alias of a given stem exists. This is useful for frameworks
whishing to reserve a number of device slots from dynamic
allocation.Signed-off-by: Sascha Hauer
(cherry picked from commit 5ce2ad39b36fd48b9f77249198655da7cbcc7ee5)Conflicts:
include/linux/of.h -
When CONFIG_IMX_SEMA4 is NOT set, some modules may
still call SEMA4 APIs, need to add dummy function
to make sure build pass.Signed-off-by: Anson Huang
(cherry picked from commit 5a2537095621da25c8967a0ccdbb8b0029e14c94) -
mxc_epdc_fb.c for i.MX6SoloLite, and i.MX6DualLite (and i.MX50 as well),
mxc_epdc_v2_fb.c for i.MX7D.Signed-off-by: Robby Cai
-
Add PMIC 'MAX17135' module drivers to 4.1.y kernel. These are necessary
to supply power for E-ink panel display functions.Signed-off-by: Robby Cai
-
We actually have lvds2 (analog clock2), an I/O clock like lvds1, in the SoC.
And this lvds2, along with lvds1, can be used to provide external clock source
to the internal pll, such as pll4_audio and pll5_video.So This patch mainly adds the lvds2 to the clock tree and fix its relationship
with pll4 accordingly.Signed-off-by: Shengjiu Wang
(cherry picked from commit f9cfc11cf8628bd01efda611074131bfa323a120) -
add the pcie related macros definitions into gpr.
Signed-off-by: Richard Zhu
(cherry picked from commit b4a5b2e53b2e743824d0af7428f7d9d406bec8bd) -
Add imx6sx pcie related gpr bits definitions.
Signed-off-by: Richard Zhu
(cherry picked from commit 991fb25d62e3e2f550f98732f5bc00eeb98f78e3) -
Initial port of the mxc V4L2 capture driver.
Baseline copied from imx_3.14.y branch:Signed-off-by: Sandor Yu