15 May, 2009
2 commits
-
This patch modifies sh_dac_audio in the following ways:
- use high resolution timer instead of TMU1
- fix cpu/dac.h include
- add future rewrite commentSigned-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
hd64461 is mapped in a fixed location, so the I/O base itself is fairly
meaningless as a configuration item. Additionally, this makes it
impossible to share hd64461 code alongside generic drivers (in the case
of sh_dac_audio), so simply make it commonly defined and permit the
mach_is_foo() logic to work out the proper semantics.Signed-off-by: Paul Mundt
14 May, 2009
2 commits
-
This patch adds INTC tables for sh7770, thanks
goes to Paul for the first prototype version.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Several platforms want to be able to do large physically contiguous
allocations (primarily nommu and video codecs on SH-Mobile), provide a
MAX_ORDER override for those cases.Tested-by: Conrad Parker
Signed-off-by: Paul Mundt
12 May, 2009
15 commits
-
Now with all of the TMU users moved over to the new TMU driver, and the
old TMU driver killed off, the left-over infrastructure can go along
with it.Signed-off-by: Paul Mundt
-
This patch removes the old TMU driver (CONFIG_SH_TMU/timer-tmu.c)
As replacement, select the sh_tmu driver with CONFIG_SH_TIMER_TMU
and configure timer channel using platform data.If multiple TMU channels are enabled using platform data, use the
earlytimer parameter on the kernel command line to select channel.
For instance, use "earlytimer=sh_tmu.0" to select the first channel.To verify which timer is being used, look at printouts or the timer
irq count in /proc/interrupts.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds CMT platform data for sh7720 and sh7721.
All 5 32-bit CMT channels unfortunately share a single IRQ.
Both clockevent and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds TMU platform data for sh7720 and sh7721.
Both clockevent and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds TMU platform data for sh7710 and sh7712.
Both clockevent and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Add TMU platform data for sh7706/sh7707/sh7708/sh7709.
Both clockevent and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds TMU platform data for sh7705. Both clockevent
and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds TMU platform data for sh7724. Both clockevent
and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds TMU platform data for sh7366. Both clockevent
and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds TMU platform data for sh7343. Both clockevent
and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds INTC tables for sh4-202 with support
for HUDI, TMU0, TMU1, TMU2, RTC, SCIF and WDT.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds TMU platform data for sh4-202. Both clockevent
and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds TMU platform data for sh7770. Both clockevent
and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds a generic sh7770 defconfig file.
Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds TMU platform data for sh7763. Both clockevent
and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt
11 May, 2009
9 commits
-
This patch adds TMU platform data for sh7780. Both clockevent
and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Update the r7780 highlander defconfig to fix
PCLK value, while at it fix cmdline on r7785.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Update intc tables and platform data to use one linux irq
per maskable interrupt source instead of keeping the one-to-one
mapping between vectors and linux irqs.This fixes potential irq masking issues for sh7760 hardware
blocks such as DMAC/TMU2/REF.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds TMU platform data for sh7760. Both clockevent
and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This patch adds TMU platform data for sh775x. Both clockevent
and clocksource support is enabled.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Include empty_zero_page in _text. This fixes a problem
introduced by c3e2586b794b12ffcdf69b4e547030b51e18e6d9
which results in broken boot on R2D-Plus.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
This fixes up the broken I2C offset in 32-bit mode.
The cause is because the board datasheet had a mistake.Signed-off-by: Yoshihiro Shimoda
Signed-off-by: Paul Mundt -
In the case where we fall back on the generic jiffies clocksource,
INITIAL_JIFFIES needs to be accounted for so that printk times aren't
completely skewed.Signed-off-by: Paul Mundt
-
.init_ramfs ought to be .init.ramfs, fix it up.
Signed-off-by: Paul Mundt
10 May, 2009
3 commits
-
There is nothing in these routines that inherently depends on R0 use.
Given that these routines are inlined, it is rather easy to blow up the
compiler by exhausting the spill class when performing a 64-bit swab.This presently manifests itself as the following:
CC fs/ocfs2/suballoc.o
fs/ocfs2/suballoc.c: In function 'ocfs2_reserve_suballoc_bits':
fs/ocfs2/suballoc.c:638: error: unrecognizable insn:
(insn 2793 1230 1231 103 arch/sh/include/asm/swab.h:33 (set (reg:HI 853)
(subreg:HI (reg:SI 149 macl) 2)) -1 (expr_list:REG_DEAD (reg:SI 149 macl)
(nil)))
fs/ocfs2/suballoc.c:638: internal compiler error: in extract_insn, at recog.c:1991This patch switches over to using an arbitrarily assigned register instead.
While the same issue does not exist in the SH-5 case, there is likewise no harm
in having an alternate register used for the byterev/shari pair.Signed-off-by: Paul Mundt
-
This implements a simple case that just iterates through the common
cases, looking at UTS_MACHINE for hints.Signed-off-by: Paul Mundt
-
Consolidate these in a single place in the Kconfig menus. At the same
time, disable their interactivity and set them according to the board
config defaults.Signed-off-by: Paul Mundt
09 May, 2009
9 commits
-
This kills off the _64 variant and moves the _32 one over as the generic
one to use.Signed-off-by: Paul Mundt
-
This introduces a BITS export that can handily be picked up by Makefiles
for cleaner sharing. Reflect its use in arch/sh/boot/compressed/ in
preparation for unifying the Makefiles.Signed-off-by: Paul Mundt
-
Signed-off-by: Paul Mundt
-
Signed-off-by: Paul Mundt
-
Tie this in to the Makefile directly, where we already know what we are
running on. This tidies up the linker script a bit, and is prep work for
unifying the arch/sh/boot/compressed linker scripts.Signed-off-by: Paul Mundt
-
Just forcefully rename the _32 variant overtop, and kill off the now
unused _64 version.Signed-off-by: Paul Mundt
-
This adds all of the requisite bits from vmlinux_64.lds.S in to the _32
variant, resulting in a unified and generic linker script that can be
shared across both.Signed-off-by: Paul Mundt
-
This fixes up the LSB setting for SHmedia branching in updated symbols
when processing module relocations.Signed-off-by: Paul Mundt
-
Newer code paths that are heavier in 64-bit math manage to get this
generated by newer compilers, provide a definition and export
accordingly. This is trivially wrapped around the existing __sdivsi3
code.Signed-off-by: Paul Mundt