04 Jan, 2012
2 commits
-
Add a interrupts-names property to allow the possibility to provide a name
to any interrupts entries. If the name is available, use it to name the
resource, otherwise keep the device full name.Signed-off-by: Benoit Cousson
Cc: Grant Likely
Cc: Rob Herring
[grant.likely: use "interrupt-names" and tidy documentation]
Signed-off-by: Grant Likely -
Add a reg-names property to allow for reg regions to be reference by name
instead of by index. Some devices have multiple register regions which
are more naturally referenced by name.If the name is available, use it to name the resource when creating a devices.
Otherwise keep the device name.Signed-off-by: Benoit Cousson
Cc: Grant Likely
Cc: Rob Herring
[Generalized documentation to be for any -names property]
Signed-off-by: Grant Likely
28 Dec, 2011
7 commits
-
A DT node may have more than 1 domain associated with it, so make sure
the hwirq number is within range when doing DT translation.Signed-off-by: Rob Herring
Acked-by: Grant Likely
Acked-by: Shawn Guo
Cc: Thomas Gleixner -
Add empty of_get_node/of_put_node functions for !CONFIG_OF builds.
Signed-off-by: Rob Herring
Acked-by: Grant Likely -
Fix the following section mismatch warning - seen when building sparc32:
WARNING: vmlinux.o(.text+0x1ff9c0): Section mismatch in reference from the function kernel_tree_alloc() to the function .init.text:prom_early_alloc()
The function kernel_tree_alloc() references
the function __init prom_early_alloc().
This is often because kernel_tree_alloc lacks a __init
annotation or the annotation of prom_early_alloc is wrong.prom_early_alloc() is annotated __init, and users of
kernel_tree_alloc() is also annotated __init.
So simply match the annoation of these to fix the warning.Signed-off-by: Sam Ravnborg
Cc: Grant Likely
Acked-by: David S. Miller
Signed-off-by: Rob Herring -
Add of_match_table and DT style i2c registration to designware i2c
driver.Refactored for pci/plat split by Dirk Brandewie.
Signed-off-by: Rob Herring
Acked-by: Grant Likely
Signed-off-by: Dirk Brandewie -
Based on recent discussions, we apparently want to do bindings even for
trivial i2c devices, even though they have for years just been added. So
start a table of the currently known ones for others to be added to
over time.(I am intentionally letting lines go over 80 characters to make it easier
to sort the file).Signed-off-by: Olof Johansson
Signed-off-by: Rob Herring -
Make this macro easier to use(do not need to pass properties, a node is
enough), also change to a more sensible name as for_each_child_of_node.Signed-off-by: Dong Aisheng
Cc: Grant Likely
Signed-off-by: Rob Herring -
This allows dt_compat to point to a constant list of compatible strings.
Signed-off-by: Uwe Kleine-König
Signed-off-by: Rob Herring
20 Dec, 2011
2 commits
-
The current implementation just ignore any NULL string inserted in a
multiple strings property.
In some cases we can have a property with a fix number of strings but
not necessarily used, like for example in a list of valid pinmux modes.prop = "uart_rx", "uart_tx", "", "", "safe_mode";
Do no skip NULL string and take them into account in
of_property_read_string_index and of_property_count_strings.Reported-by: Tony Lindgren
Signed-off-by: Benoit Cousson
Cc: Grant Likely
Signed-off-by: Rob Herring -
We are currently using 'cavium', 'cortina' and 'st', add them to the
list of known prefixes.Signed-off-by: David Daney
Signed-off-by: Rob Herring
17 Dec, 2011
21 commits
-
This reverts commit eb1711bb94991e93669c5a1b5f84f11be2d51ea1.
It blows up the i915 seqno tracking, resulting in the
BUG_ON(seqno == 0);
in i915_wait_request() triggering, which will cause lock-ups.
See for example
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/903010
https://lkml.org/lkml/2011/12/14/395Reported-requested-and-tested-by: Dirk Hohndel
Reported-by: Richard Eames
Reported-by: Rocko Requin
Acked-by: Daniel Vetter
Cc: Dave Airlie
Cc: Chris Wilson
Cc: Keith Packard
Cc: Eric Anholt
Signed-off-by: Linus Torvalds -
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc32: Be less strict in matching %lo part of relocation.
sbus: convert drivers/sbus/char/* to use module_platform_driver()
bbc_i2c: Remove unneeded err variable
sparc: Use kmemdup rather than duplicating its implementation -
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow().
sch_gred: should not use GFP_KERNEL while holding a spinlock
ipip, sit: copy parms.name after register_netdevice
ipv6: Fix for adding multicast route for loopback device automatically.
ssb: fix init regression with SoCs
rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP transition
mac80211: fix another race in aggregation start
fsl_pq_mdio: Clean up tbi address configuration
ppp: fix pptp double release_sock in pptp_bind()
net/fec: fix the use of pdev->id
ath9k: fix check for antenna diversity support
batman-adv: delete global entry in case of roaming
batman-adv: in case of roaming mark the client with TT_CLIENT_ROAM
Bluetooth: Correct version check in hci_setup
btusb: fix a memory leak in btusb_send_frame()
Bluetooth: bnep: Fix module reference
Bluetooth: cmtp: Fix module reference
Bluetooth: btmrvl: support Marvell Bluetooth device SD8797 -
…inux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: unplug every once and a while
Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code
Btrfs: only set cache_generation if we setup the block group
Btrfs: don't panic if orphan item already exists
Btrfs: fix leaked space in truncate
Btrfs: fix how we do delalloc reservations and how we free reservations on error
Btrfs: deal with enospc from dirtying inodes properly
Btrfs: fix num_workers_starting bug and other bugs in async thread
BTRFS: Establish i_ops before calling d_instantiate
Btrfs: add a cond_resched() into the worker loop
Btrfs: fix ctime update of on-disk inode
btrfs: keep orphans for subvolume deletion
Btrfs: fix inaccurate available space on raid0 profile
Btrfs: fix wrong disk space information of the files
Btrfs: fix wrong i_size when truncating a file to a larger size
Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror* 'for-linus-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: lower the dirty balance poll interval -
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux:
drm/i915/dp: Dither down to 6bpc if it makes the mode fit
drm/i915: enable semaphores on per-device defaults
drm/i915: don't set unpin_work if vblank_get fails
drm/i915: By default, enable RC6 on IVB and SNB when reasonable
iommu: Export intel_iommu_enabled to signal when iommu is in use
drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check
drm/i915: prevent division by zero when asking for chipset power
drm/i915: add PCH info to i915_capabilities
drm/i915: set the right SDVO transcoder for CPT
drm/i915: no-lvds quirk for ASUS AT5NM10T-I
drm/i915: Treat pre-gen4 backlight duty cycle value consistently
drm/i915: Hook up Ivybridge eDP
drm/i915: add multi-threaded forcewake support -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: HDA: Use LPIB Position fix for Intel SCH Poulsbo
ALSA: hda: fix mute led polarity for HP laptops with buggy BIOS
ALSA: HDA: Set position fix to LPIB for an Atom/Poulsbo based device
ASoC: Fix hx4700 error handling to free gpios if snd_soc_register_card fails
ASoC: WM8958: correctly show firmware magic on mismatch
ASoC: mxs: Add appropriate MODULE_ALIAS()
ASoC: mxs: Add missing MODULE_LICENSE("GPL")
ASoC: Fix WM8996 24.576MHz clock operation
ASoC: Include linux/module.h for smdk2443_wm9710
ASoC: Fix a typo in jive_wm8750
ASoC: Fix build dependency for SND_SOC_JZ4740_CODEC
ASoC: Include linux/io.h for jz4740 codec -
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
gpio: Fix DA9052 GPIO build errors.
gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121
gpio-ml-ioh: Add the irq_disable/irq_enable hooks for ml-ioh irq chip
gpio-ml-ioh: fix a bug in the interrupt handler
gpio: pl061: drop extra check for NULL platform_data -
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP: rx51: fix USB
ARM: OMAP: mcbsp: Fix possible memory corruption
arm/imx: fix power button on imx51 babbage board
ARM: imx: fix cpufreq build errors
ARM: mx5: add __initconst for fec pdata
MXC PWM: should active during DOZE/WAIT/DBG mode
ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS
ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep
ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210
ARM: SAMSUNG: remove duplicated header include -
* 'for-linus' of git://git.kernel.dk/linux-block:
block: don't kick empty queue in blk_drain_queue()
block/swim3: Locking fixes
loop: Fix discard_alignment default setting
cfq-iosched: fix cfq_cic_link() race confition
cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails
cciss: fix flush cache transfer length
cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler
loop: fix loop block driver discard and encryption comment
block: initialize request_queue's numa node during -
Tests show that the original large intervals can easily make the dirty
limit exceeded on 100 concurrent dd's. So adapt to as large as the
next check point selected by the dirty throttling algorithm.Signed-off-by: Wu Fengguang
Signed-off-by: Chris Mason -
Some active adaptors (VGA usually) only have two lanes at 2.7GHz.
That's a maximum pixel clock of 144MHz at 8bpc, but 192MHz at 6bpc.Fixes Asus UX31 panel being black at startup due to no valid modes since
dc22ee6fc18ce0f15424e753e8473c306ece95c1.v2: Rebased to current code, resulting in the fix applying to EDP panels as
well. Also changed from spatio-temporal to just spatial dithering on
pre-ironlake, to be conssitent (and less visual flicker)Signed-off-by: Adam Jackson
Signed-off-by: Eric Anholt
Tested-by: Eric Anholt
Tested-by: Dirk Hohndel
Signed-off-by: Keith Packard -
This adds a default setting for semaphores parameter, and enables
semaphores by default on IVB.For now, as semaphores interaction with VTd causes random issues on
SNB, we do not enable them by default. But they can still be enabled
via the semaphores=1 kernel parameter.v2: enables semaphores on SNB when IO remapping is disabled, with base
on Keith Packard patch.CC: Daniel Vetter
CC: Ben Widawsky
CC: Keith Packard
CC: Jesse Barnes
CC: Chris Wilson
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42696
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40564
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38862
Reviewed-by: Chris Wilson
Reviewed-by: Daniel Vetter
Signed-off-by: Eugeni Dodonov
Signed-off-by: Keith Packard -
This fixes a race where we may try to finish a page flip and decrement
the refcount even if our vblank_get failed and we ended up with a
spurious flip pending interrupt.Fixes https://bugs.freedesktop.org/show_bug.cgi?id=34211.
Signed-off-by: Jesse Barnes
Signed-off-by: Keith Packard -
RC6 should always work on IVB, and should work on SNB whenever IO
remapping is disabled. RC6 never works on Ironlake. Make the default
value for the parameter follow these guidelines. Setting the value
to either 0 or 1 will force the specified behavior.Signed-off-by: Keith Packard
Reviewed-by: Kenneth Graunke
Reviewed-by: Eugeni Dodonov
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38567
Cc: Ted Phelps
Cc: Peter
Cc: Lukas Hejtmanek
Cc: Andrew Lutomirski -
In i915 driver, we do not enable either rc6 or semaphores on SNB when dmar
is enabled. The new 'intel_iommu_enabled' variable signals when the
iommu code is in operation.Cc: Ted Phelps
Cc: Peter
Cc: Lukas Hejtmanek
Cc: Andrew Lutomirski
CC: Daniel Vetter
Cc: Eugeni Dodonov
Signed-off-by: Keith Packard -
We were checking whether the supplied edid matched the connector it was
read from. We do this in case a DDC read returns an EDID for another
device on a multifunction or otherwise interesting card. However, we
failed to include LVDS as a digital device and so rejecting an otherwise
valid EDID.Fixes the detection of the secondary SDVO LVDS panel on the Libretto
W105.Signed-off-by: Chris Wilson
Reviewed-by: Adam Jackson
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39216
Signed-off-by: Keith Packard -
This prevents an in-kernel division by zero which happens when we are
asking for i915_chipset_val too quickly, or within a race condition
between the power monitoring thread and userspace accesses via debugfs.The issue can be reproduced easily via the following command:
while ``; do cat /sys/kernel/debug/dri/0/i915_emon_status; doneThis is particularly dangerous because it can be triggered by
a non-privileged user by just reading the debugfs entry.This issue was also found independently by Konstantin Belousov
, who proposed a similar patch.Reported-by: Konstantin Belousov
Acked-by: Jesse Barnes
Acked-by: Keith Packard
Reviewed-by: Chris Wilson
Cc:
Signed-off-by: Eugeni Dodonov
Signed-off-by: Keith Packard -
Signed-off-by: Chris Wilson
Signed-off-by: Paulo Zanoni
Signed-off-by: Keith Packard -
v2: add a CPT-specific macro, make code cleaner
v3: fix commit messageBugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41272
Cc: stable@kernel.org
Signed-off-by: Paulo Zanoni
Reviewed-by: Chris Wilson
Signed-off-by: Keith Packard -
https://bugzilla.redhat.com/show_bug.cgi?id=750006
Signed-off-by: Adam Jackson
Signed-off-by: Keith Packard
16 Dec, 2011
8 commits
-
…kgene/linux-samsung into fixes
-
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
ibft: Fix finding IBFT ACPI table on UEFI -
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8712u: Add new USB ID
staging: tidspbridge: request dmtimer clocks on init
staging: tidspbridge: include module.h by default -
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: option: Removing one bogus and adding some new Huawei combinations
USB: cdc-acm: add IDs for Motorola H24 HSPA USB module.
usb: option: Add Huawei E398 controlling interfaces
usb: renesas_usbhs: add hcd->has_tt for low/full speed
usb: renesas_usbhs: typofix: irq_dtch control DTCHE
usb: gadget: storage: release superspeed descriptors. -
The bisection implemented in unwind_find_origin() stopped to early. If
there is only a single entry left to check the original code just took
the end point as origin which might be wrong.This was introduced in commit de66a979012d ("ARM: 7187/1: fix unwinding
for XIP kernels").Reported-and-tested-by: Nick Bowler
Signed-off-by: Uwe Kleine-König
Signed-off-by: Linus Torvalds -
The btrfs io submission threads can build up massive plug lists. This
keeps things more reasonable so we don't hand over huge dumps of IO at
once.Signed-off-by: Chris Mason
-
While probing, fd sets up queue, probes hardware and tears down the
queue if probing fails. In the process, blk_drain_queue() kicks the
queue which failed to finish initialization and fd is unhappy about
that.floppy0: no floppy controllers found
------------[ cut here ]------------
WARNING: at drivers/block/floppy.c:2929 do_fd_request+0xbf/0xd0()
Hardware name: To Be Filled By O.E.M.
VFS: do_fd_request called on non-open device
Modules linked in:
Pid: 1, comm: swapper Not tainted 3.2.0-rc4-00077-g5983fe2 #2
Call Trace:
[] warn_slowpath_common+0x7a/0xb0
[] warn_slowpath_fmt+0x41/0x50
[] do_fd_request+0xbf/0xd0
[] blk_drain_queue+0x65/0x80
[] blk_cleanup_queue+0xe3/0x1a0
[] floppy_init+0xdeb/0xe28
[] ? daring+0x6b/0x6b
[] do_one_initcall+0x3f/0x170
[] kernel_init+0x9d/0x11e
[] ? schedule_tail+0x22/0xa0
[] kernel_thread_helper+0x4/0x10
[] ? start_kernel+0x2be/0x2be
[] ? gs_change+0xb/0xbAvoid it by making blk_drain_queue() kick queue iff dispatch queue has
something on it.Signed-off-by: Tejun Heo
Reported-by: Ralf Hildebrandt
Reported-by: Wu Fengguang
Tested-by: Sergei Trofimovich
Signed-off-by: Jens Axboe