30 Jul, 2011
3 commits
-
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits)
[media] ir-mce_kbd-decoder: include module.h for its facilities
[media] ov5642: include module.h for its facilities
[media] em28xx: Fix DVB-C maxsize for em2884
[media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz
[media] v4l: mt9v032: Fix Bayer pattern
[media] V4L: mt9m111: rewrite set_pixfmt
[media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear
[media] V4L: initial driver for ov5642 CMOS sensor
[media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails
[media] V4L: soc-camera: remove soc-camera bus and devices on it
[media] V4L: soc-camera: un-export the soc-camera bus
[media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier
[media] V4L: add media bus configuration subdev operations
[media] V4L: soc-camera: group struct field initialisations together
[media] V4L: soc-camera: remove now unused soc-camera specific PM hooks
[media] V4L: pxa-camera: switch to using standard PM hooks
[media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param
[media] Don't OOPS if videobuf_dvb_get_frontend return NULL
[media] NetUP Dual DVB-T/C CI RF: load firmware according card revision
[media] omap3isp: Support configurable HS/VS polarities
...Fix up conflicts:
- arch/arm/mach-omap2/board-rx51-peripherals.c:
cleanup regulator supply definitions in mach-omap2
vs
OMAP3: RX-51: define vdds_csib regulator supply
- drivers/staging/tm6000/tm6000-alsa.c (trivial) -
* 'next/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (21 commits)
arm/dt: tegra devicetree support
arm/versatile: Add device tree support
dt/irq: add irq_domain_generate_simple() helper
irq: add irq_domain translation infrastructure
dmaengine: imx-sdma: add device tree probe support
dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name
dmaengine: imx-sdma: use platform_device_id to identify sdma version
mmc: sdhci-esdhc-imx: add device tree probe support
mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host
mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()
mmc: sdhci-esdhc-imx: do not reference platform data after probe
mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
net/fec: add device tree probe support
net: ibm_newemac: convert it to use of_get_phy_mode
dt/net: add helper function of_get_phy_mode
net/fec: gasket needs to be enabled for some i.mx
serial/imx: add device tree probe support
serial/imx: get rid of the uses of cpu_is_mx1()
arm/dt: Add dtb make rule
arm/dt: Add skeleton dtsi file
... -
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog: (25 commits)
watchdog: WatchDog Timer Driver Core - Add minimum and max timeout
watchdog: WatchDog Timer Driver Core - Add ioctl call
watchdog: WatchDog Timer Driver Core - Add nowayout feature
watchdog: WatchDog Timer Driver Core - Add Magic Close feature
watchdog: WatchDog Timer Driver Core - Add WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl
watchdog: WatchDog Timer Driver Core - Add WDIOC_SETOPTIONS ioctl
watchdog: WatchDog Timer Driver Core - Add WDIOC_KEEPALIVE ioctl
watchdog: WatchDog Timer Driver Core - Add basic ioctl functionality
watchdog: WatchDog Timer Driver Core - Add basic framework
watchdog: hpwdt: add next gen HP servers
watchdog: it8712f_wdt.c: improve includes
watchdog: at91sam9/wdt: move register header to drivers
watchdog: Add Xilinx watchdog timer driver
watchdog: remove empty pm-functions
watchdog: sp805: Flush posted writes in enable/disable.
watchdog: sp805: Don't write 0 to the load value register.
watchdog: imx2_wdt: add device tree probe support
watchdog: s3c2410: Add support for device tree based probe
watchdog: mpcore_wdt: Add suspend/resume support.
watchdog: mtx1-wdt: use dev_{err,info} instead of printk()
...
28 Jul, 2011
37 commits
-
* 'for-linus' of git://neil.brown.name/md: (75 commits)
md/raid10: handle further errors during fix_read_error better.
md/raid10: Handle read errors during recovery better.
md/raid10: simplify read error handling during recovery.
md/raid10: record bad blocks due to write errors during resync/recovery.
md/raid10: attempt to fix read errors during resync/check
md/raid10: Handle write errors by updating badblock log.
md/raid10: clear bad-block record when write succeeds.
md/raid10: avoid writing to known bad blocks on known bad drives.
md/raid10 record bad blocks as needed during recovery.
md/raid10: avoid reading known bad blocks during resync/recovery.
md/raid10 - avoid reading from known bad blocks - part 3
md/raid10: avoid reading from known bad blocks - part 2
md/raid10: avoid reading from known bad blocks - part 1
md/raid10: Split handle_read_error out from raid10d.
md/raid10: simplify/reindent some loops.
md/raid5: Clear bad blocks on successful write.
md/raid5. Don't write to known bad block on doubtful devices.
md/raid5: write errors should be recorded as bad blocks if possible.
md/raid5: use bad-block log to improve handling of uncorrectable read errors.
md/raid5: avoid reading from known bad blocks.
... -
Add min_timeout (minimum timeout) and max_timeout
values so that the framework can check if the new
timeout value is between the minimum and maximum
timeout values. If both values are 0, then the
framework will leave the check for the watchdog
device driver itself.Signed-off-by: Alan Cox
Signed-off-by: Wim Van Sebroeck
Acked-by: Arnd Bergmann
Acked-by: Wolfram Sang -
Add support for extra ioctl calls by adding a
ioctl watchdog operation. This operation will be
called before we do our own handling of ioctl
commands. This way we can override the internal
ioctl command handling and we can also add
extra ioctl commands. The ioctl watchdog operation
should return the appropriate error codes or
-ENOIOCTLCMD if the ioctl command should be handled
through the internal ioctl handling of the framework.Signed-off-by: Alan Cox
Signed-off-by: Wim Van Sebroeck
Acked-by: Arnd Bergmann
Acked-by: Wolfram Sang -
Add support for the nowayout feature to the
WatchDog Timer Driver Core framework.
This feature prevents the watchdog timer from being
stopped.Signed-off-by: Alan Cox
Signed-off-by: Wim Van Sebroeck
Acked-by: Arnd Bergmann
Acked-by: Wolfram Sang -
Add support for the Magic Close feature to the
WatchDog Timer Driver Core framework.Signed-off-by: Alan Cox
Signed-off-by: Wim Van Sebroeck
Acked-by: Arnd Bergmann
Acked-by: Wolfram Sang -
This part add's the WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl
functionality to the WatchDog Timer Driver Core framework.Signed-off-by: Alan Cox
Signed-off-by: Wim Van Sebroeck
Acked-by: Arnd Bergmann
Acked-by: Wolfram Sang -
This part add's the WDIOC_SETOPTIONS ioctl functionality
to the WatchDog Timer Driver Core framework.Signed-off-by: Alan Cox
Signed-off-by: Wim Van Sebroeck
Acked-by: Arnd Bergmann
Acked-by: Wolfram Sang -
This part add's the WDIOC_KEEPALIVE ioctl functionality to the
WatchDog Timer Driver Core framework. Please note that the
WDIOF_KEEPALIVEPING bit has to be set in the watchdog_info
options field.Signed-off-by: Alan Cox
Signed-off-by: Wim Van Sebroeck
Acked-by: Arnd Bergmann
Acked-by: Wolfram Sang -
This part add's the basic ioctl functionality to the
WatchDog Timer Driver Core framework. The supported
ioctl call's are:
WDIOC_GETSUPPORT
WDIOC_GETSTATUS
WDIOC_GETBOOTSTATUSSigned-off-by: Alan Cox
Signed-off-by: Wim Van Sebroeck
Acked-by: Arnd Bergmann
Acked-by: Wolfram Sang -
The WatchDog Timer Driver Core is a framework
that contains the common code for all watchdog-driver's.
It also introduces a watchdog device structure and the
operations that go with it.This is the introduction of this framework. This part
supports the minimal watchdog userspace API (or with
other words: the functionality to use /dev/watchdog's
open, release and write functionality as defined in
the simplest watchdog API). Extra functionality will
follow in the next set of patches.Signed-off-by: Alan Cox
Signed-off-by: Wim Van Sebroeck
Acked-by: Arnd Bergmann
Acked-by: Wolfram Sang -
For testing the dt work, define a dt-enabled versatile platform.
This patch adds a new versatile platform for when using the device
tree. Add platform and amba devices are discovered and registered by
parsing the device tree. Clocks and initial io mappings are still
configured statically.This patch still depends on some static platform_data for a few devices
which is passed via the auxdata structure to of_platform_populate(),
but it is a viable starting point until the drivers can get all
configuration data out of the device tree.Signed-off-by: Grant Likely
-
…s/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (54 commits)
tpm_nsc: Fix bug when loading multiple TPM drivers
tpm: Move tpm_tis_reenable_interrupts out of CONFIG_PNP block
tpm: Fix compilation warning when CONFIG_PNP is not defined
TOMOYO: Update kernel-doc.
tpm: Fix a typo
tpm_tis: Probing function for Intel iTPM bug
tpm_tis: Fix the probing for interrupts
tpm_tis: Delay ACPI S3 suspend while the TPM is busy
tpm_tis: Re-enable interrupts upon (S3) resume
tpm: Fix display of data in pubek sysfs entry
tpm_tis: Add timeouts sysfs entry
tpm: Adjust interface timeouts if they are too small
tpm: Use interface timeouts returned from the TPM
tpm_tis: Introduce durations sysfs entry
tpm: Adjust the durations if they are too small
tpm: Use durations returned from TPM
TOMOYO: Enable conditional ACL.
TOMOYO: Allow using argv[]/envp[] of execve() as conditions.
TOMOYO: Allow using executable's realpath and symlink's target as conditions.
TOMOYO: Allow using owner/group etc. of file objects as conditions.
...Fix up trivial conflict in security/tomoyo/realpath.c
-
Previous patches in the bad block series extended behavior of
rdev's 'state' interface but lacked documentation update.
Fix it.Signed-off-by: Namhyung Kim
Signed-off-by: NeilBrown -
Previous patch in the bad block series added new sysfs interfaces
([unacknowledged_]bad_blocks) for each rdev without documentation.
Add it.Signed-off-by: Namhyung Kim
Signed-off-by: NeilBrown -
Use a name convention for the firmware file that matches on the
current firmware namespacing. Also, add it to the firmware
download script.Signed-off-by: Mauro Carvalho Chehab
-
Get DRX-K firmware for Digital Devices DVB-CT cards
Signed-off-by: Oliver Endriss
Signed-off-by: Mauro Carvalho Chehab -
Add control definitions and documentation for controls
specific to codec devices.Signed-off-by: Kamil Debski
Signed-off-by: Kyungmin Park
Signed-off-by: Mauro Carvalho Chehab -
Add fourcc definitions and documentation for the following
compressed formats: H264, H264 without start codes,
MPEG1/2/4 ES, XVID, VC1 Annex G and Annex L compliant.Signed-off-by: Kamil Debski
Signed-off-by: Kyungmin Park
Signed-off-by: Mauro Carvalho Chehab -
Document V4L2 control endianness as machine endianness.
Signed-off-by: Sakari Ailus
Signed-off-by: Mauro Carvalho Chehab -
Add documentation for V4L2 flash controls.
Signed-off-by: Sakari Ailus
Acked-by: Laurent Pinchart
Signed-off-by: Mauro Carvalho Chehab -
[mchehab@redhat.com: Fix a merge conflict and make compat.xml coherent with v4l2.xml]
Signed-off-by: Hans Verkuil
Acked-by: Sakari Ailus
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans de Goede
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans de Goede
Signed-off-by: Mauro Carvalho Chehab -
Currently, -EINVAL is used to return either when an IOCTL is not
implemented, or if the ioctl was not implemented.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
While here, removes the bogus EINTERNAL error codes.
Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Move generic stuff into gen-errors.xml, and remove them from
DVB API. While here, removes two bogus error codes that aren't
supported or used on Linux: EINTERNAL and ENOSIGNAL.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Remove generic errors from ioctl() descriptions. For other ioctl's,
there's no generic section. So, just keep whatever is there.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Remove generic errors from ioctl() descriptions. For other ioctl's,
there's no generic section. So, just keep whatever is there.
Also remove the EINTERNAL error code, as no DVB driver returns
it, and this error code is not defined on POSIX or on Linux.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Just like the V4L, MC and LIRC API's, point to the generic error
chapter for ioctl's. This will allow moving generic error codes
to just one place inside all media API's.A latter patch will remove the generic errors from each specific
ioctl.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Add a reference for the generic error code chapter to LIRC ioctl
description.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
V4L ioctl function descripton also has a generic error chapter.
Remove it, as it is now obsoleted by a general, multi-API generic
error descriptions.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
The EBUSY is already described as a generic error condition, with a
similar text.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Instead of having their own generic error codes at the MC API, move
its section to the generic one and be sure that all media ioctl's
will point to it.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Be sure that all VIDIOC_* ioctl are using the return error macro, and
aren't specifying generic error codes internally.Acked-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab
