14 Sep, 2009
1 commit
-
Implement blk_limits_io_opt() and make blk_queue_io_opt() a wrapper
around it. DM needs this to avoid poking at the queue_limits directly.Signed-off-by: Martin K. Petersen
Signed-off-by: Mike Snitzer
Signed-off-by: Jens Axboe
11 Sep, 2009
1 commit
-
Get rid of any functions that test for these bits and make callers
use bio_rw_flagged() directly. Then it is at least directly apparent
what variable and flag they check.Signed-off-by: Jens Axboe
05 Sep, 2009
1 commit
-
Set sensible I/O hints for striped DM devices in the topology
infrastructure added for 2.6.31 for userspace tools to
obtain via sysfs.Add .io_hints to 'struct target_type' to allow the I/O hints portion
(io_min and io_opt) of the 'struct queue_limits' to be set by each
target and implement this for dm-stripe.Signed-off-by: Mike Snitzer
Signed-off-by: Alasdair G Kergon
24 Jul, 2009
1 commit
-
Incorrect device area lengths are being passed to device_area_is_valid().
The regression appeared in 2.6.31-rc1 through commit
754c5fc7ebb417b23601a6222a6005cc2e7f2913.With the dm-stripe target, the size of the target (ti->len) was used
instead of the stripe_width (ti->len/#stripes). An example of a
consequent incorrect error message is:device-mapper: table: 254:0: sdb too small for target
Signed-off-by: Mike Snitzer
Signed-off-by: Alasdair G Kergon
22 Jun, 2009
2 commits
-
Add .iterate_devices to 'struct target_type' to allow a function to be
called for all devices in a DM target. Implemented it for all targets
except those in dm-snap.c (origin and snapshot).(The raid1 version number jumps to 1.12 because we originally reserved
1.1 to 1.11 for 'block_on_error' but ended up using 'handle_errors'
instead.)Signed-off-by: Mike Snitzer
Signed-off-by: Alasdair G Kergon
Cc: martin.petersen@oracle.com -
Flush support for the stripe target.
This sets ti->num_flush_requests to the number of stripes and
remaps individual flush requests to the appropriate stripe devices.Signed-off-by: Mikulas Patocka
Signed-off-by: Alasdair G Kergon
06 Jan, 2009
1 commit
-
Change dm_unregister_target to return void and use BUG() for error
reporting.dm_unregister_target can only fail because of programming bug in the
target driver. It can't fail because of user's behavior or disk errors.This patch changes unregister_target to return void and use BUG if
someone tries to unregister non-registered target or unregister target
that is in use.This patch removes code duplication (testing of error codes in all dm
targets) and reports bugs in just one place, in dm_unregister_target. In
some target drivers, these return codes were ignored, which could lead
to a situation where bugs could be missed.Signed-off-by: Mikulas Patocka
Signed-off-by: Alasdair G Kergon
14 Nov, 2008
1 commit
-
Don't proceed if dm_stripe_init() fails to register itself as a dm target.
Signed-off-by: Heinz Mauelshagen
Signed-off-by: Alasdair G Kergon
22 Oct, 2008
2 commits
-
Change #include "dm.h" to #include in all targets.
Targets should not need direct access to internal DM structures.Signed-off-by: Mikulas Patocka
Signed-off-by: Alasdair G Kergon -
Move array_too_big to include/linux/device-mapper.h because it is
used by targets.Remove the test from dm-raid1 as the number of mirror legs is limited
such that it can never fail. (Even for stripes it seems rather
unlikely.)Signed-off-by: Mikulas Patocka
Signed-off-by: Alasdair G Kergon
09 Oct, 2008
1 commit
-
* Implement disk_devt() and part_devt() and use them to directly
access devt instead of computing it from ->major and ->first_minor.Note that all references to ->major and ->first_minor outside of
block layer is used to determine devt of the disk (the part0) and as
->major and ->first_minor will continue to represent devt for the
disk, converting these users aren't strictly necessary. However,
convert them for consistency.* Implement disk_max_parts() to avoid directly deferencing
genhd->minors.* Update bdget_disk() such that it doesn't assume consecutive minor
space.* Move devt computation from register_disk() to add_disk() and make it
the only one (all other usages use the initially determined value).These changes clean up the code and will help disk->part dereference
fix and extended block device numbers.Signed-off-by: Tejun Heo
Signed-off-by: Jens Axboe
08 Feb, 2008
2 commits
-
This patch adds additional information to the status line. It is added at the
end of the returned text so it will not interfere with existing
implementations using this data. The addition of this information will allow
for a common return interface to match that returned with the dm-raid1.c
status line (with Jonathan Brassow's patches).Here is a sample of what is returned with a mirror "status" call:
isw_eeaaabgfg_mirror: 0 488390920 mirror 2 8:16 8:32 3727/3727 1 AA 1 coreHere's what's returned with this patch for a stripe "status" call:
isw_dheeijjdej_stripe: 0 976783872 striped 2 8:16 8:32 1 AASigned-off-by: Brian Wood
Signed-off-by: Alasdair G Kergon -
This patch adds the stripe_end_io function to process errors that might
occur after an IO operation. As part of this there are a number of
enhancements made to record and trigger events:- New atomic variable in struct stripe to record the number of
errors each stripe volume device has experienced (could be used
later with uevents to report back directly to userspace)- New workqueue/work struct setup to process the trigger_event function
- New end_io function. It is here that testing for BIO error conditions
take place. It determines the exact stripe that cause the error,
records this in the new atomic variable, and calls the queue_work() function- New trigger_event function to process failure events. This
calls dm_table_event()Signed-off-by: Brian Wood
Signed-off-by: Alasdair G Kergon
20 Oct, 2007
1 commit
-
Replacing n & (n - 1) for power of 2 check by is_power_of_2(n)
Signed-off-by: vignesh babu
Signed-off-by: Alasdair G Kergon
09 Dec, 2006
1 commit
-
Update existing targets to use the new symbols for return values from target
map and end_io functions.There is no effect on behaviour.
Test results:
Done build test without errors.Signed-off-by: Kiyoshi Ueda
Signed-off-by: Jun'ichi Nomura
Signed-off-by: Alasdair G Kergon
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
27 Jun, 2006
1 commit
-
Tidy device-mapper error messages to include context information
automatically.Signed-off-by: Alasdair G Kergon
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
28 Mar, 2006
2 commits
-
Signed-off-by: Kevin Corry
Cc: Alasdair G Kergon
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
We don't know what type sector_t has. Sometimes it's unsigned long, sometimes
it's unsigned long long. For example on ppc64 it's unsigned long with
CONFIG_LBD=n and on x86_64 it's unsigned long long with CONFIG_LBD=n.The way to handle all of this is to always use unsigned long long and to
always typecast the sector_t when printing it.Acked-by: Alasdair G Kergon
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Mar, 2006
1 commit
-
The dm-stripe target currently does not enforce that the size of a stripe
device be a multiple of the chunk-size. Under certain conditions, this can
lead to I/O requests going off the end of an underlying device. This
test-case shows one example.echo "0 100 linear /dev/hdb1 0" | dmsetup create linear0
echo "0 100 linear /dev/hdb1 100" | dmsetup create linear1
echo "0 200 striped 2 32 /dev/mapper/linear0 0 /dev/mapper/linear1 0" | \
dmsetup create stripe0
dd if=/dev/zero of=/dev/mapper/stripe0 bs=1kThis will produce the output:
dd: writing '/dev/mapper/stripe0': Input/output error
97+0 records in
96+0 records outAnd in the kernel log will be:
attempt to access beyond end of device
dm-0: rw=0, want=104, limit=100The patch will check that the table size is a multiple of the stripe
chunk-size when the table is created, which will prevent the above striped
device from being created.This should not affect tools like LVM or EVMS, since in all the cases I can
think of, striped devices are always created with the sizes being a
multiple of the chunk-size.The size of a stripe device must be a multiple of its chunk-size.
(akpm: that typecast is quite gratuitous)
Signed-off-by: Kevin Corry
Signed-off-by: Alasdair G Kergon
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Apr, 2005
1 commit
-
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.Let it rip!
