12 Mar, 2006
25 commits
-
* struct _SCCB => struct sccb
* PSCCB => struct sccb *
* SCCB => struct sccbSigned-off-by: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: James Bottomley -
Signed-off-by: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: James Bottomley -
Signed-off-by: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: James Bottomley -
Signed-off-by: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: James Bottomley -
Signed-off-by: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: James Bottomley -
Signed-off-by: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: James Bottomley -
Signed-off-by: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: James Bottomley -
Signed-off-by: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: James Bottomley -
* Remove unused #define's
* Remove unused typedefs.
* Remove prototypes for non-existing functions.Signed-off-by: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: James Bottomley -
Add device-major aliases in drivers/scsi, allowing kmod autoload:
MODULE_ALIAS_CHARDEV_MAJOR(SCSI_CHANGER_MAJOR)
MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR)
MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR)
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR)
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISKN_MAJOR)Signed-off-by: Andrew Morton
Acked-by: Kai Makisara
Signed-off-by: James Bottomley -
Because of some quirk in the SCSI spec the aic79xx driver chose to
force a renegotiation when sending an inquiry. This should better
be handled by the upper layers if required at all.Signed-off-by: Hannes Reinecke
Signed-off-by: James Bottomley -
This patch fixes the aic79xx driver to properly respond to BIOS
settings.Signed-off-by: Hannes Reinecke
Signed-off-by: James Bottomley -
On certain systems the driver seems to hit upon some
"scsi0: Invalid Sequencer interrupt occurred." problem and dumps card state.
According to Adaptec engineers this message is harmless. So as not to
confuse user we can as well disable the internal card state dump and
just print out the message itself.Signed-off-by: Hannes Reinecke
Signed-off-by: James Bottomley -
This patch updates the error recovery. Routines for TARGET RESET
and ABORT COMMAND are split up as the logic is quite dissimilar.Signed-off-by: Hannes Reinecke
Signed-off-by: James Bottomley -
Signed-off-by: Hannes Reinecke
Signed-off-by: James Bottomley -
This patch converts aic79xx to use the midlayer-supplied tcq
functions.We also set the queuedepth to '1' if tcq is disabled; the
aic79xx driver gets confused otherwise. Will set it back to
'2' once I figure out how to queue requests in the driver.Signed-off-by: Hannes Reinecke
Signed-off-by: James Bottomley -
This patch removes the need for platform_data->qfrozen.
We're now using complete() instead of semaphores thus
simplifying ahd_freeze_simq() quite a lot.
This also fixes some deadlocks in the recovery code (again).Signed-off-by: Hannes Reinecke
Signed-off-by: James Bottomley -
Change version number to 8.1.4
Signed-off-by: James Smart
Signed-off-by: James Bottomley -
Two misc fixes:
- Fix deadlock caused by return with host_lock held in lpfc_findnode_did
- Initialize all fields of the allocated mail box structure to zero.
Was causing some sysfs mailbox commands to fail immediately after load.Signed-off-by: James Smart
Signed-off-by: James Bottomley -
Introduce lpfc_reset_barrier() function for resets on dual channel adapters
Workaround for a hardware errata on dual channel asics. There is a
potential for the chip to lock up on a reset if a shared dma engine is in
use. The (ugly) work around requires a reset process which uses a mailbox
command to synchronize the independent channels prior to the reset to
avoid the issue. Unfortunately, the timing windows required to ensure this
workaround succeeds are very specific, meaning we can't release the cpu
during the barrier.Signed-off-by: James Smart
Signed-off-by: James Bottomley -
Fixed a timer panic due to timer firing after freeing ndlp
Signed-off-by: James Smart
Signed-off-by: James Bottomley -
Fixed RSCN handling when a PLOGI is in retry.
Signed-off-by: James Smart
Signed-off-by: James Bottomley -
Fix Discovery processing for NPorts that change their NPortId on the fly
due to a cable swap.Signed-off-by: James Smart
Signed-off-by: James Bottomley -
i2o_exec_lct_modified() does not release memory allocated for work_struct.
Signed-off-by: Vasily Averin
Although your patch is the same, i've rewritten it a little bit for
naming consistency in the I2O driver.Acked-by: Markus Lidel
Signed-off-by: James Bottomley -
Signed-off-by: Ralf Baechle
Signed-off-by: James Bottomley
10 Mar, 2006
1 commit
-
Signed-off-by: James Bottomley
08 Mar, 2006
1 commit
-
The patch
[SCSI] SCSI core kmalloc2kzalloc
Has an incorrect piece in sr_ioctl.c; it changes buffer from kmalloc
to kzalloc, but then removes the clearing of the stack variable struct
packet_command. This, in turn leaves rubbish in the sense pointer
which the sr_do_ioctl() command then happily writes to ... oops.Thanks to Mike Christie for spotting this.
Signed-off-by: James Bottomley
07 Mar, 2006
2 commits
-
On 02/07/2006 04:12:55 AM, Christoph Hellwig wrote:
> On Mon, Feb 06, 2006 at 08:02:21PM -0500, Willem Riede wrote:
>
> > But I will certainly help retire scsi_request. And anything else that is
> > needed to keep up with proper kernel style. Let me know what those are, if
> > you would? I'll start looking at how st has changed, and will be back with
> > any questions I may have.
>
> right now the above is the most urgent bit. What would be nice but not
> required is a conversion to the sense handling helpers, similar to what
> st got (aka using the *normalize_sense functions and then dealing with the
> parsed sense buffer instead of the raw sense data)Ok, so here is my first take at satisfying this request.
Be warned, that beyond compiling, and checking that the new module
doesn't immediately blow up, there hasn't yet been a lot of testing.But this should allow you to comment on the changes, and move forward
with dropping scsi_request from the kernel code.Signed-off-by: Willem Riede
Signed-off-by: James Bottomley -
Stop gcc complaining about undefined variables
Signed-off-by: James Bottomley
06 Mar, 2006
9 commits
-
Change version number to 8.1.3
Signed-off-by: Jamie Wellnitz
Signed-off-by: James Bottomley -
Fix polling mode panic
Cause: Race between interrupt driven and polling path in harvesting iocbs
from
the response ring.Signed-off-by: Jamie Wellnitz
Signed-off-by: James Bottomley -
Protect NPL lists with host lock
Symptoms: lpfc_findnode_rpi and lpfc_findnode_did can be called
outside of the discovery thread context. We have to iterate
through the NPL lists under the host lock and all add/del
operations on those lists have to be done under host lock.Signed-off-by: Jamie Wellnitz
Signed-off-by: James Bottomley -
Fix deadlock in lpfc_fdmi_tmo_handler
lpfc_fdmi_tmo_handler was calling lpfc_fdmi_cmd with the host_lock
held. lpfc_fdmi_cmd assumes the host_lock is released as it calls functions
that acquire the host_lock. lpfc_fdmi_tmo_handler acquired the host_lock to
protect access to work_hba_events. This was already checked in the worker
thread so we can remove that code completely and remove access to the
host_lock.Signed-off-by: Jamie Wellnitz
Signed-off-by: James Bottomley -
Fix performance when using multiple SLI rings
Currently the driver allocates all of its SLI command and response ring
entries to one primary ring. Other rings get little, or no, resources.Allow more resources to be given to ring 1
Signed-off-by: Jamie Wellnitz
Signed-off-by: James Bottomley -
Remove unused MBhostaddr from lpfc_sli structure
Signed-off-by: Jamie Wellnitz
Signed-off-by: James Bottomley -
PCI hrd_type should be obtained with pci_read_config_byte() macro
Driver keys off of this field to report the proper adapter type.
The pci subsystem explicitly clears the multiport bit in the copy of
the field given the driver. Thus, to properly name the card, obtain it
from config space.Signed-off-by: Jamie Wellnitz
Signed-off-by: James Bottomley -
Derive supported speeds from LMT field in the READ_CONFIG
Driver was keying off internal cores. Use what the firmware reports instead.
Signed-off-by: Jamie Wellnitz
Signed-off-by: James Bottomley -
Begin introducing the concept of sas remote devices that have an rphy
embedded. The first one (this) is a simple end device. All that an
end device really does is have port mode page parameters contained.
The next and more complex piece will be expander remote devices.Signed-off-by: James Bottomley
03 Mar, 2006
2 commits
-
aic94xx doesn't have a use for the bay or enclosure identifiers.
Also, I think it's not going to need a get_linkerrors(), so wire up
all of these exported properties as conditional on the underlying
function support.Signed-off-by: James Bottomley
-
Use the kthread_ API instead of opencoding lots of hairy code for kernel
thread creation and teardown.Also switch from semaphore-based thread wakeup to wake_up_process.
Signed-off-by: Christoph Hellwig
Acked-By: Andrew Vasquez
Signed-off-by: James Bottomley
