19 Jul, 2007
40 commits
-
Update CodingStyle to talk about "-DDEBUG" message conventions and the
new "-DVERBOSE_DEBUG" convention.Signed-off-by: David Brownell
Signed-off-by: Andrew Morton
Signed-off-by: Greg Kroah-Hartman -
This defines a dev_vdbg() call, which is enabled with -DVERBOSE_DEBUG.
When enabled, dev_vdbg() acts just like dev_dbg(). When disabled, it is a
NOP ... just like dev_dbg() without -DDEBUG. The specific code was moved
out of a USB patch, but lots of drivers have similar support.That is, code can now be written to use an additional level of debug
output, selected at compile time. Many driver authors have found this
idiom to be very useful. A typical usage model is for "normal" debug
messages to focus on fault paths and not be very "chatty", so that those
messages can be left on during normal operation without much of a
performance or syslog load. On the other hand "verbose" messages would be
noisy enough that they wouldn't normally be enabled; they might even affect
timings enough to change system or driver behavior.Signed-off-by: David Brownell
Signed-off-by: Andrew Morton
Signed-off-by: Greg Kroah-Hartman -
With sysfs_fill_super() converted to use sysfs_get_inode(), there is
no user of sysfs_init_inode() outside of fs/sysfs/inode.c. Make it
static.Signed-off-by: Tejun Heo
Acked-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
While making sysfs indoes hashed, sysfs root inode was left out. Now
that nlink accounting depends on the inode being on the hash, sysfs
root inode nlink isn't adjusted properly.Put sysfs root inode on the inode hash by allocating it using
sysfs_get_inode() like other sysfs inodes. While at it, massage
comments a bit.Signed-off-by: Tejun Heo
Acked-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Signed-off-by: Brandon Philips
Acked-by: Tejun Heo
Signed-off-by: Greg Kroah-Hartman -
kmem_cache_free() with NULL is not allowed. But it may happen
if out of memory error is triggered in sysfs_new_dirent().
This patch fixes that error handling.Signed-off-by: Akinobu Mita
Signed-off-by: Greg Kroah-Hartman -
This patch (as933) removes the deprecated dpm_runtime_suspend() and
dpm_runtime_resume() routines from the PM core. The only user of
those routines is the PCMCIA ds driver; local replacements are added.Signed-off-by: Alan Stern
CC: Dominik Brodowski
Signed-off-by: Greg Kroah-Hartman -
This patch (as932) removes the deprecated sysfs .../power/state
attribute files.Signed-off-by: Alan Stern
Acked-by: Pavel Machek
Signed-off-by: Greg Kroah-Hartman -
This allows the uevent file to handle any type of uevent action to be
triggered by userspace instead of just the "add" uevent.Signed-off-by: Kay Sievers
Signed-off-by: Greg Kroah-Hartman -
Hi,
This patch kills the pointless debugfs rmdir() printk() when called on a
non-empty directory. blktrace will sometimes have to call it a few times
when forcefully ending a trace, which polutes the log with pointless
warnings.Rationale:
- It's more code to work-around this "problem" in the debugfs users, and
you would have to add code to check for empty directories to do so (or
assume that debugfs is using simple_ helpers, but that would be a
layering violation).- Other rmdir() implementations don't complain about something this
silly.Signed-off-by: Jens Axboe
Signed-off-by: Greg Kroah-Hartman -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
[AVR32] Initialize phy_mask for both macb devices
[AVR32] Fix atomic_add_unless() and atomic_sub_unless()
[AVR32] Correct misspelled CONFIG_BLK_DEV_INITRD variable.
[AVR32] Fix build error in parse_tag_rdimg()
[AVR32] Don't wire up macb0 unless SW6 is in default position
[AVR32] Wire up SSC platform device 0 as TX on ATSTK1000 board
[AVR32] Add Atmel SSC driver platform device to AT32AP architecture
[AVR32] Remove optimization of unaligned word loads
[AVR32] Make STK1000 mux settings configurable
[AVR32] CPU frequency scaling for AT32AP
[AVR32] Split SM device into PM, RTC, WDT and EIC
[AVR32] faster avr32 unaligned access -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup:
[PATCH] x86: do not recompile boot for each build
[x86 setup] Save/restore DS around invocations of INT 10h
[x86 setup] VGA: Clear the Protect bit before setting the vertical height
[x86 setup] Fix assembly constraints
[x86 setup] build/tools.c: fix comment
[x86 setup] MAINTAINERS: document x86 setup code git tree -
The TRACE_IRQS_ON function in iret_exc: calls a C function without
ensuring that the segments are set properly. Move the trace function and
the enabling of interrupt into the C stub.Signed-off-by: Peter Zijlstra
Signed-off-by: Linus Torvalds -
The code for LDT segment selectors was not robust in the face of a bogus
selector set in %cs via ptrace before the single-step was done.Signed-off-by: Roland McGrath
Signed-off-by: Linus Torvalds -
The STK1000 uses pullups on the MDIO lines to the PHY, but they are
too weak. This causes the PHY layer to detect PHYs on all possible MII
addresses. Mask out all but the correct address to prevent this from
happening.Signed-off-by: Haavard Skinnemoen
-
These functions depend on "result" being initalized to 0, but "result"
is not included as an input constraint to the inline assembly block
following its initialization, only as an output constraint. Thus gcc
thinks it doesn't need to initialize it, so result ends up undefined
if the "unless" condition is true.This fixes an oops in sunrpc where the faulty atomics caused
rpciod_up() to not start the workqueue as it should.Signed-off-by: Haavard Skinnemoen
-
Signed-off-by: Robert P. J. Day
Signed-off-by: Haavard Skinnemoen -
This code is inside an #ifdef with a misspelled config symbol, so it
hasn't been used for a long time. Fix it before fixing the config
symbol to keep bisection working.Signed-off-by: Haavard Skinnemoen
-
If the user wants to sacrifice macb0 for more GPIOs, let him.
Signed-off-by: Haavard Skinnemoen
-
Signed-off-by: Hans-Christian Egtvedt
Signed-off-by: Haavard Skinnemoen -
This patch adds register definitions, clocks and IRQs to the platform devices.
Signed-off-by: Hans-Christian Egtvedt
Signed-off-by: Haavard Skinnemoen -
If we let unaligned word loads bypass the generic unaligned handling,
gcc may combine it with a swap.b instruction and turn it into a ldwsp
instruction, which does not work with unaligned addresses.Revert the optimization to prevent the RNDIS driver from crashing.
Hopefully we'll figure something out later (it may be better to do the
optimization in gcc.)Signed-off-by: Haavard Skinnemoen
-
This adds some STK1002-specific config options covering the jumper settings,
so the kernel can automatically be configured to include the relevant devices.One of them replaces the previous internal SW2_DEFAULT setting; SPI config
is affected by two of the jumpers; and a fourth one switches between LCD and
the second Ethernet connector. (There's more that to be done.)Signed-off-by: David Brownell
Signed-off-by: Haavard Skinnemoen -
This patch enables CPU frequency scaling for AT32AP devices. This will
enable the CPU to scale between the speed of the high speed bus and
the master clock and thus save some power.The patch also adds a parent to cpu_clk and a cpu_clk_set_rate to
enable changing the CPU clock divider in a sane way.The driver does not check if the given rate is 0, thus resulting in a
div by 0. I think this check should be go into the clk_set_rate
framework, and not here.Tested on AT32AP7000/ATSTK1000.
Hardware documentation can be found in the AT32AP7000 datasheet.
Signed-off-by: Hans-Christian Egtvedt
Signed-off-by: Haavard Skinnemoen -
Split the SM platform device into separate platform devices for PM,
RTC, WDT and EIC. This is more correct according to the documentation
and allows us to simplify the code a little.Also turn the EIC driver into a real platform driver.
Signed-off-by: Haavard Skinnemoen
Acked-by: Hans-Christian Egtvedt -
Use a more conventional implementation for unaligned access, and include
an AT32AP-specific optimization: the CPU will handle unaligned words.The result is always faster and smaller for 8, 16, and 32 bit values.
For 64 bit quantities, it's presumably larger.Signed-off-by: David Brownell
Signed-off-by: Haavard Skinnemoen -
Keep the arch/i386/boot directory from being rebuilt every time.
Signed-off-by: Sam Ravnborg
Signed-off-by: H. Peter Anvin -
There exists at least one card, Trident TVGA8900CL (BIOS dated 1992/9/8)
which clobbers DS when "scrolling in an SVGA text mode of more than
800x600 pixels." Although we are extremely unlikely to run into that
situation, it is cheap insurance to save and restore DS, and it only adds
a grand total of 50 bytes to the total output.Pointed out by Etienne Lorrain.
Cc: Etienne Lorrain
Signed-off-by: H. Peter Anvin -
If the user has asked for the vertical height registers to be recomputed
by setting bit 15 in the video mode number, we do so without clearing the
Protect bit in the Vertical Retrace Register before setting the Overflow
register. As a result, if the VGA BIOS had set the Protect bit, the
write to the Overflow register will be dropped, and bits [9:8] of the
vertical height will be left unchanged.This is a bug imported from the assembly version of this code. It was
pointed out by Etienne Lorrain.Cc: Etienne Lorrain
Signed-off-by: H. Peter Anvin -
Fix incorrect assembly constraints. In particular, fix memory
constraints used inside push..pop, which can cause invalid operation
since gcc may generate %esp-relative references.Additionally:
outl() should have "dN" not "dn".
query_mca() shouldn't listen 16/32-bit registers in an 8-bit only
context.has_eflag(): the "mask" is only used well after both the stack pointer
and the output registers have been touched; this requires the output
registers to be earlyclobbers (=&) and the input to exclude memory (so
"ri", not "g").Thanks to Etienne Lorrain and Chuck Ebbert for prompting this review.
Cc: Etienne Lorrain
Cc: Chuck Ebbert
Signed-off-by: H. Peter Anvin -
Correct a comment in arch/i386/boot/build/tools.c; we now build the
kernel from only two components instead of three, since the boot
sector has been integrated in the setup code.Signed-off-by: H. Peter Anvin
-
Document the existence of a published git tree for the x86 setup code.
Signed-off-by: H. Peter Anvin
-
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (126 commits)
V4L/DVB (5847): Clean up schedule_timeout calls in cpia2 and ivtv code
V4L/DVB (5846): Clean up setting state and scheduling timeouts
V4L/DVB (5844): ivtv: add high volume debugging flag
V4L/DVB (5843): ivtv: fix missing signal_pending check.
V4L/DVB (5842): ivtv: Add locking to ensure stream setup is atomic.
V4L/DVB (5841): tveeprom: add support for Philips FQ1216LME MK3 tuner.
V4L/DVB (5840): fix dst and cx24123: tune() callback changed signess for delay
V4L/DVB (5838): dvb-core: Fix signedness warnings (gcc 4.1.1, kernel 2.6.22)
V4L/DVB (5837): stv0299: Fix signedness warning (gcc 4.1.1, kernel 2.6.22)
V4L/DVB (5836): dvb-ttpci: re-initialize aspect ratio and pan scan after arm crash
V4L/DVB (5835): saa7146/dvb-ttpci: Fix signedness warnings (gcc 4.1.1, kernel 2.6.22)
V4L/DVB (5834): dvb-core: fix signedness warnings and const stripping
V4L/DVB (5832): ir-common: optimize bit extract function
V4L/DVB (5831): stradis: use ARRAY_SIZE
V4L/DVB (5829): Firmware extract and loading for opera dvb-usb update
V4L/DVB (5828): Kconfig: Added GemTek USB radio and removed experimental dependency.
V4L/DVB (5826): Usbvision: video mux cleanup
V4L/DVB (5825): Alter the tuner type for the WinTV USB UK PAL model.
V4L/DVB (5824): Usbvision: Hauppauge WinTV USB SECAM_L fix
V4L/DVB (5821): Saa7134: add remote control support for LifeView FlyDVB-S LR300
... -
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: extent macros cleanup
Fix compilation with EXT_DEBUG, also fix leXX_to_cpu conversions.
ext4: remove extra IS_RDONLY() check
ext4: Use is_power_of_2()
Use zero_user_page() in ext4 where possible
ext4: Remove 65000 subdirectory limit
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields
ext4: Add nanosecond timestamps
jbd2: Move jbd2-debug file to debugfs
jbd2: Fix CONFIG_JBD_DEBUG ifdef to be CONFIG_JBD2_DEBUG
ext4: Set the journal JBD2_FEATURE_INCOMPAT_64BIT on large devices
ext4: Make extents code sanely handle on-disk corruption
ext4: copy i_flags to inode flags on write
ext4: Enable extents by default
Change on-disk format to support 2^15 uninitialized extents
write support for preallocated blocks
fallocate support in ext4
sys_fallocate() implementation on i386, x86_64 and powerpc -
* 'upstream' of git://git.infradead.org/~dedekind/ubi-2.6: (28 commits)
UBI: fix compile warning
UBI: fix error handling in erase worker
UBI: fix comments
UBI: remove unneeded error checks
UBI: cleanup usage of try_module_get
UBI: fix overflow bug
UBI: bugfix in max_sqnum calculation
UBI: bugfix in sqnum calculation
UBI: fix signed-unsigned multiplication
UBI: fix bug in atomic_leb_change()
UBI: fix message
UBI: fix debugging stuff
UBI: bugfix in error path
UBI: use is_power_of_2()
UBI: fix freeing ubi->vtbl while unloading
UBI: fix MAINTAINERS
UBI: bugfix in ubi_leb_change()
UBI: kill homegrown endian macros
UBI: cleanup ioctl handling
UBI: error path bugfix
... -
Signed-off-by: Robert P. J. Day
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Replace assignments to "current->state" with the preferred calls to
schedule_timeout_interruptible().Signed-off-by: Robert P. J. Day
Signed-off-by: Mauro Carvalho Chehab -
Add support for high volume debug messages, allowing them to be turned
on selectively.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Starting an MPEG and VBI capture simultaneously caused errors in
the VBI setup: this setup was done twice when it should be done
only for the first stream that is opened.
Added a mutex to prevent this from happening.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab
