19 May, 2008
1 commit
-
As Richard Smith pointed out, ACR * 6250 / 15 provides for less
precision loss than ACR * 4167 / 10, _and_ it doesn't overflow. Switch
to using that equation for CHARGE_COUNTER.Signed-off-by: Andres Salomon
Cc: "Richard A. Smith"
Signed-off-by: Andrew Morton
Signed-off-by: Anton Vorontsov
13 May, 2008
1 commit
-
This adds PROP_CHARGE_COUNTER to the power supply class (documenting it
as well). The OLPC battery driver uses this for spitting out its ACR
values (in uAh). We have some rounding errors (the data sheet claims
416.7, the math actually works out to 416.666667, so we're forced to
choose between overflows or precision loss. I chose precision loss,
and stuck w/ data sheet values), but I don't think anyone will care
that much.Signed-off-by: Andres Salomon
Signed-off-by: Anton Vorontsov
04 May, 2008
4 commits
-
Refuse to run with an EC < 0x44. We're playing it safe, and this is a pretty
old EC version.Also, add a comment about why we're checking the EC version.
Signed-off-by: Andres Salomon
Cc: David Woodhouse
Signed-off-by: Andrew Morton
Signed-off-by: Anton Vorontsov -
Move portions of the massive switch statement into functions. The layout of
this thing has already caused one bug (a break in the wrong place), it needed
to shrink.Signed-off-by: Andres Salomon
Cc: David Woodhouse
Signed-off-by: Andrew Morton
Signed-off-by: Anton Vorontsov -
This allows you to dump 0x60 bytes from the battery's EEPROM (starting at
address 0x20). Note that it does an EC command for each byte, so it's pretty
slow. OTOH, if you want to grab just a single byte from somewhere in the
EEPROM, you can do something like:dd bs=1 count=1 skip=16 if=/sys/class/power_supply/olpc-battery/eeprom | od -x
Userspace battery collection/logging information needs this.
Signed-off-by: Andres Salomon
Cc: David Woodhouse
Signed-off-by: Andrew Morton
Signed-off-by: Anton Vorontsov -
This adds serial number support to the OLPC battery driver.
Signed-off-by: David Woodhouse
Signed-off-by: Andres Salomon
Signed-off-by: Anton Vorontsov
29 Apr, 2008
1 commit
-
This adds support for OLPC XO hardware. Open Firmware on XOs don't contain
the VSA, so it is necessary to emulate the PCI BARs in the kernel. This also
adds functionality for running EC commands, and a CONFIG_OLPC.A number of OLPC drivers depend upon CONFIG_OLPC.
olpc_ec_timeout is a hack to work around Embedded Controller bugs.
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: geode_has_vsa build fix]
[akpm@linux-foundation.org: olpc_register_battery_callback doesn't exist]
Signed-off-by: Andres Salomon
Acked-by: Ingo Molnar
Cc: Thomas Gleixner
Cc: Andi Kleen
Cc: Jordan Crouse
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
02 Feb, 2008
1 commit
-
The CAPACITY_LEVEL stuff defines various levels of charge; however, what
is the difference between them? What differentiates between HIGH and NORMAL,
LOW and CRITICAL, etc?As it appears that these are fairly arbitrary, we end up making such policy
decisions in the kernel (or in hardware). This is the sort of decision that
should be made in userspace, not in the kernel.If the hardware does not support _CAPACITY and it cannot be easily calculated,
then perhaps the driver should register a custom CAPACITY_LEVEL attribute;
however, userspace should not become accustomed to looking for such a thing,
and we should certainly not encourage drivers to provide CAPACITY_LEVEL
stubs.The following removes support for POWER_SUPPLY_PROP_CAPACITY_LEVEL. The
OLPC battery driver is the only driver making use of this, so it's
removed from there as well.Signed-off-by: Andres Salomon
Signed-off-by: David Woodhouse
16 Jul, 2007
1 commit
-
Per Jeff Garzik request.
Signed-off-by: Jeff Garzik
Signed-off-by: Anton Vorontsov
10 Jul, 2007
1 commit
-
Signed-off-by: David Woodhouse
Signed-off-by: Anton Vorontsov