Eric Lee / smarc-fsl-linux-kernel

10 May, 2010

1 commit

30 Mar, 2010

1 commit

  • 5a0e3ad6a   include cleanup: Update gfp.h and slab.h includes to prepare for breaking implic… ... Browse Code »

    …it slab.h inclusion from percpu.h

    percpu.h is included by sched.h and module.h and thus ends up being
    included when building most .c files. percpu.h includes slab.h which
    in turn includes gfp.h making everything defined by the two files
    universally available and complicating inclusion dependencies.

    percpu.h -> slab.h dependency is about to be removed. Prepare for
    this change by updating users of gfp and slab facilities include those
    headers directly instead of assuming availability. As this conversion
    needs to touch large number of source files, the following script is
    used as the basis of conversion.

    http://userweb.kernel.org/~tj/misc/slabh-sweep.py

    The script does the followings.

    * Scan files for gfp and slab usages and update includes such that
    only the necessary includes are there. ie. if only gfp is used,
    gfp.h, if slab is used, slab.h.

    * When the script inserts a new include, it looks at the include
    blocks and try to put the new include such that its order conforms
    to its surrounding. It's put in the include block which contains
    core kernel includes, in the same order that the rest are ordered -
    alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
    doesn't seem to be any matching order.

    * If the script can't find a place to put a new include (mostly
    because the file doesn't have fitting include block), it prints out
    an error message indicating which .h file needs to be added to the
    file.

    The conversion was done in the following steps.

    1. The initial automatic conversion of all .c files updated slightly
    over 4000 files, deleting around 700 includes and adding ~480 gfp.h
    and ~3000 slab.h inclusions. The script emitted errors for ~400
    files.

    2. Each error was manually checked. Some didn't need the inclusion,
    some needed manual addition while adding it to implementation .h or
    embedding .c file was more appropriate for others. This step added
    inclusions to around 150 files.

    3. The script was run again and the output was compared to the edits
    from #2 to make sure no file was left behind.

    4. Several build tests were done and a couple of problems were fixed.
    e.g. lib/decompress_*.c used malloc/free() wrappers around slab
    APIs requiring slab.h to be added manually.

    5. The script was run on all .h files but without automatically
    editing them as sprinkling gfp.h and slab.h inclusions around .h
    files could easily lead to inclusion dependency hell. Most gfp.h
    inclusion directives were ignored as stuff from gfp.h was usually
    wildly available and often used in preprocessor macros. Each
    slab.h inclusion directive was examined and added manually as
    necessary.

    6. percpu.h was updated not to include slab.h.

    7. Build test were done on the following configurations and failures
    were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
    distributed build env didn't work with gcov compiles) and a few
    more options had to be turned off depending on archs to make things
    build (like ipr on powerpc/64 which failed due to missing writeq).

    * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
    * powerpc and powerpc64 SMP allmodconfig
    * sparc and sparc64 SMP allmodconfig
    * ia64 SMP allmodconfig
    * s390 SMP allmodconfig
    * alpha SMP allmodconfig
    * um on x86_64 SMP allmodconfig

    8. percpu.h modifications were reverted so that it could be applied as
    a separate patch and serve as bisection point.

    Given the fact that I had only a couple of failures from tests on step
    6, I'm fairly confident about the coverage of this conversion patch.
    If there is a breakage, it's likely to be something in one of the arch
    headers which should be easily discoverable easily on most builds of
    the specific arch.

    Signed-off-by: Tejun Heo <tj@kernel.org>
    Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
    Cc: Ingo Molnar <mingo@redhat.com>
    Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

    Tejun Heo
     

24 Mar, 2010

1 commit

  • d7646f763   pcmcia: use dev_pm_ops for class pcmcia_socket_class ... Browse Code »

    Instead of requiring PCMCIA socket drivers to call various functions
    during their (bus) resume and suspend functions, register an own
    dev_pm_ops for this class. This fixes several suspend/resume bugs
    seen on db1xxx-ss, and probably on some other socket drivers, too.

    With regard to the asymmetry with only _noirq suspend, but split up
    resume, please see bug 14334 and commit 9905d1b411946fb3 .

    Signed-off-by: Dominik Brodowski

    Dominik Brodowski
     

18 Feb, 2010

1 commit

  • 0d418dfae   pcmcia/omap_cf: don't redefine SZ_2K ... Browse Code »

    This fixes:

    drivers/pcmcia/omap_cf.c:74:1: warning: "SZ_2K" redefined

    Since

    c1191b0 ([ARM] Kirkwood: create a mapping for the Security Accelerator SRAM)

    SZ_2K is defined in arch/arm/include/asm/sizes.h.

    Signed-off-by: Uwe Kleine-König
    Signed-off-by: Dominik Brodowski

    Uwe Kleine-König
     

21 Oct, 2009

1 commit

  • ce491cf85   omap: headers: Move remaining headers from include/mach to include/plat ... Browse Code »

    Move the remaining headers under plat-omap/include/mach
    to plat-omap/include/plat. Also search and replace the
    files using these headers to include using the right path.

    This was done with:

    #!/bin/bash
    mach_dir_old="arch/arm/plat-omap/include/mach"
    plat_dir_new="arch/arm/plat-omap/include/plat"
    headers=$(cd $mach_dir_old && ls *.h)
    omap_dirs="arch/arm/*omap*/ \
    drivers/video/omap \
    sound/soc/omap"
    other_files="drivers/leds/leds-ams-delta.c \
    drivers/mfd/menelaus.c \
    drivers/mfd/twl4030-core.c \
    drivers/mtd/nand/ams-delta.c"

    for header in $headers; do
    old="#include

    Tony Lindgren
     

29 Sep, 2009

1 commit

07 Aug, 2008

2 commits

03 Jul, 2008

1 commit

01 May, 2008

1 commit

16 Apr, 2008

1 commit

  • 12c2c019e   pcmcia: fix platform driver hotplug/coldplug ... Browse Code »

    Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is
    prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable PCMCIA
    platform drivers, to re-enable auto loading.

    [dbrownell@users.sourceforge.net: registration fixes]
    Signed-off-by: Kay Sievers
    Signed-off-by: David Brownell
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Kay Sievers
     

09 Apr, 2007

1 commit

  • b6d2cccb5   [PATCH] omap_cf: oops-on-suspend fix ... Browse Code »

    Convert omap_cf into a platform_driver ... this resolves oopsing during
    suspend/resume.

    Evidently folk haven't tried suspend/resume on an OSK (the main platform
    for this driver) since September or so, which is when platform_device
    learned about suspend_late()/resume_early() and stopped being able to
    suspend/resume without a platform_driver.

    Signed-off-by: David Brownell
    Cc: Dominik Brodowski
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    David Brownell
     

24 Feb, 2007

1 commit

15 Feb, 2007

1 commit

  • cd354f1ae   [PATCH] remove many unneeded #includes of sched.h ... Browse Code »

    After Al Viro (finally) succeeded in removing the sched.h #include in module.h
    recently, it makes sense again to remove other superfluous sched.h includes.
    There are quite a lot of files which include it but don't actually need
    anything defined in there. Presumably these includes were once needed for
    macros that used to live in sched.h, but moved to other header files in the
    course of cleaning it up.

    To ease the pain, this time I did not fiddle with any header files and only
    removed #includes from .c-files, which tend to cause less trouble.

    Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
    arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
    allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
    configs in arch/arm/configs on arm. I also checked that no new warnings were
    introduced by the patch (actually, some warnings are removed that were emitted
    by unnecessarily included header files).

    Signed-off-by: Tim Schmielau
    Acked-by: Russell King
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Tim Schmielau
     

14 Dec, 2006

1 commit

  • cd8612808   [PATCH] Fix numerous kcalloc() calls, convert to kzalloc() ... Browse Code »

    All kcalloc() calls of the form "kcalloc(1,...)" are converted to the
    equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect
    ordering of the first two arguments are fixed.

    Signed-off-by: Robert P. J. Day
    Cc: Jeff Garzik
    Cc: Alan Cox
    Cc: Dominik Brodowski
    Cc: Adam Belay
    Cc: James Bottomley
    Cc: Greg KH
    Cc: Mark Fasheh
    Cc: Trond Myklebust
    Cc: Neil Brown
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Robert P. J. Day
     

26 Oct, 2006

1 commit

05 Oct, 2006

1 commit

  • 7d12e780e   IRQ: Maintain regs pointer globally rather than passing to IRQ handlers ... Browse Code »

    Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
    of passing regs around manually through all ~1800 interrupt handlers in the
    Linux kernel.

    The regs pointer is used in few places, but it potentially costs both stack
    space and code to pass it around. On the FRV arch, removing the regs parameter
    from all the genirq function results in a 20% speed up of the IRQ exit path
    (ie: from leaving timer_interrupt() to leaving do_IRQ()).

    Where appropriate, an arch may override the generic storage facility and do
    something different with the variable. On FRV, for instance, the address is
    maintained in GR28 at all times inside the kernel as part of general exception
    handling.

    Having looked over the code, it appears that the parameter may be handed down
    through up to twenty or so layers of functions. Consider a USB character
    device attached to a USB hub, attached to a USB controller that posts its
    interrupts through a cascaded auxiliary interrupt controller. A character
    device driver may want to pass regs to the sysrq handler through the input
    layer which adds another few layers of parameter passing.

    I've build this code with allyesconfig for x86_64 and i386. I've runtested the
    main part of the code on FRV and i386, though I can't test most of the drivers.
    I've also done partial conversion for powerpc and MIPS - these at least compile
    with minimal configurations.

    This will affect all archs. Mostly the changes should be relatively easy.
    Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

    struct pt_regs *old_regs = set_irq_regs(regs);

    And put the old one back at the end:

    set_irq_regs(old_regs);

    Don't pass regs through to generic_handle_irq() or __do_IRQ().

    In timer_interrupt(), this sort of change will be necessary:

    - update_process_times(user_mode(regs));
    - profile_tick(CPU_PROFILING, regs);
    + update_process_times(user_mode(get_irq_regs()));
    + profile_tick(CPU_PROFILING);

    I'd like to move update_process_times()'s use of get_irq_regs() into itself,
    except that i386, alone of the archs, uses something other than user_mode().

    Some notes on the interrupt handling in the drivers:

    (*) input_dev() is now gone entirely. The regs pointer is no longer stored in
    the input_dev struct.

    (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
    something different depending on whether it's been supplied with a regs
    pointer or not.

    (*) Various IRQ handler function pointers have been moved to type
    irq_handler_t.

    Signed-Off-By: David Howells
    (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

    David Howells
     

01 Oct, 2006

1 commit

  • dcb9c3923   [PATCH] omap_cf works again (sync with linux-omap tree) ... Browse Code »

    This syncs the omap_cf driver with the one from the linux-omap tree. Changes
    include fixing build warnings (section mismatch, unused return value) and
    coping with various pcmcia core changes related to managing i/o memory and irq
    resources.

    Signed-off-by: David Brownell
    Cc: Dominik Brodowski
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    David Brownell
     

03 Jul, 2006

1 commit

21 Mar, 2006

1 commit

30 Oct, 2005

1 commit

29 Oct, 2005

1 commit

  • 9480e307c   [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks ... Browse Code »

    In PM v1, all devices were called at SUSPEND_DISABLE level. Then
    all devices were called at SUSPEND_SAVE_STATE level, and finally
    SUSPEND_POWER_DOWN level. However, with PM v2, to maintain
    compatibility for platform devices, I arranged for the PM v2
    suspend/resume callbacks to call the old PM v1 suspend/resume
    callbacks three times with each level in order so that existing
    drivers continued to work.

    Since this is obsolete infrastructure which is no longer necessary,
    we can remove it. Here's an (untested) patch to do exactly that.

    Signed-off-by: Russell King
    Signed-off-by: Greg Kroah-Hartman

    Russell King
     

29 Sep, 2005

1 commit

10 Sep, 2005

1 commit