Eric Lee / smarc-fsl-linux-kernel

14 Jun, 2017

1 commit

  • 172733959   clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE ... Browse Code »

    The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the
    clocksource at early stage. However, this macro is also used to initialize
    the clockevent if any, or the clockevent only.

    It was originally suggested to declare another macro to initialize a
    clockevent, so in order to separate the two entities even they belong to the
    same IP. This was not accepted because of the impact on the DT where splitting
    a clocksource/clockevent definition does not make sense as it is a Linux
    concept not a hardware description.

    On the other side, the clocksource has not interrupt declared while the
    clockevent has, so it is easy from the driver to know if the description is
    for a clockevent or a clocksource, IOW it could be implemented at the driver
    level.

    So instead of dealing with a named clocksource macro, let's use a more generic
    one: TIMER_OF_DECLARE.

    The patch has not functional changes.

    Signed-off-by: Daniel Lezcano
    Acked-by: Heiko Stuebner
    Acked-by: Neil Armstrong
    Acked-by: Arnd Bergmann
    Acked-by: Matthias Brugger
    Reviewed-by: Linus Walleij

    Daniel Lezcano
     

28 Jun, 2016

2 commits

  • 177cf6e52   clocksources: Switch back to the clksrc table ... Browse Code »

    All the clocksource drivers's init function are now converted to return
    an error code. CLOCKSOURCE_OF_DECLARE is no longer used as well as the
    clksrc-of table.

    Let's convert back the names:
    - CLOCKSOURCE_OF_DECLARE_RET => CLOCKSOURCE_OF_DECLARE
    - clksrc-of-ret => clksrc-of

    Signed-off-by: Daniel Lezcano

    For exynos_mct and samsung_pwm_timer:
    Acked-by: Krzysztof Kozlowski

    For arch/arc:
    Acked-by: Vineet Gupta

    For mediatek driver:
    Acked-by: Matthias Brugger

    For the Rockchip-part
    Acked-by: Heiko Stuebner

    For STi :
    Acked-by: Patrice Chotard

    For the mps2-timer.c and versatile.c changes:
    Acked-by: Liviu Dudau

    For the OXNAS part :
    Acked-by: Neil Armstrong

    For LPC32xx driver:
    Acked-by: Sylvain Lemieux

    For Broadcom Kona timer change:
    Acked-by: Ray Jui

    For Sun4i and Sun5i:
    Acked-by: Chen-Yu Tsai

    For Meson6:
    Acked-by: Carlo Caione

    For Keystone:
    Acked-by: Santosh Shilimkar

    For NPS:
    Acked-by: Noam Camus

    For bcm2835:
    Acked-by: Eric Anholt

    Daniel Lezcano
     
  • 42452508b   clocksource/drivers/zevio: Convert init function to return error ... Browse Code »

    The init functions do not return any error. They behave as the following:

    - panic, thus leading to a kernel crash while another timer may work and
    make the system boot up correctly

    or

    - print an error and let the caller unaware if the state of the system

    Change that by converting the init functions to return an error conforming
    to the CLOCKSOURCE_OF_RET prototype.

    Proper error handling (rollback, errno value) will be changed later case
    by case, thus this change just return back an error or success in the init
    function.

    Signed-off-by: Daniel Lezcano

    Daniel Lezcano
     

10 Aug, 2015

1 commit

29 Apr, 2014

1 commit

06 Jun, 2013

1 commit

  • 77ba83bb1   clocksource: Add TI-Nspire timer support ... Browse Code »

    This patch adds a clocksource/clockevent driver for the timer found on some
    models in the TI-Nspire calculator series. The timer has two 16bit subtimers
    within its memory mapped I/O interface but only the first can generate
    interrupts. The first subtimer is used to generate clockevents but only if an
    interrupt number and register is given.

    The interrupt acknowledgement mechanism is a little strange because the
    interrupt mask and acknowledge registers are located in another memory mapped
    I/O peripheral. The address of this register is passed to the driver through
    device tree bindings.

    The second subtimer is used as a clocksource because it isn't capable of
    generating an interrupt. This subtimer is always added.

    Reviewed-by: Linus Walleij
    Signed-off-by: Daniel Tang
    Signed-off-by: Daniel Lezcano

    Daniel Tang