16 Feb, 2019
1 commit
-
Pull block fixes from Jens Axboe:
- Ensure we insert into the hctx dispatch list, if a request is marked
as DONTPREP (Jianchao)- NVMe pull request, single missing unlock on error fix (Keith)
- MD pull request, single fix for a potentially data corrupting issue
(Nate)- Floppy check_events regression fix (Yufen)
* tag 'for-linus-20190215' of git://git.kernel.dk/linux-block:
md/raid1: don't clear bitmap bits on interrupted recovery.
floppy: check_events callback should not return a negative number
nvme-pci: add missing unlock for reset error
blk-mq: insert rq with DONTPREP to hctx dispatch list when requeue
12 Feb, 2019
1 commit
-
When requeue, if RQF_DONTPREP, rq has contained some driver
specific data, so insert it to hctx dispatch list to avoid any
merge. Take scsi as example, here is the trace event log (no
io scheduler, because RQF_STARTED would prevent merging),kworker/0:1H-339 [000] ...1 2037.209289: block_rq_insert: 8,0 R 4096 () 32768 + 8 [kworker/0:1H]
scsi_inert_test-1987 [000] .... 2037.220465: block_bio_queue: 8,0 R 32776 + 8 [scsi_inert_test]
scsi_inert_test-1987 [000] ...2 2037.220466: block_bio_backmerge: 8,0 R 32776 + 8 [scsi_inert_test]
kworker/0:1H-339 [000] .... 2047.220913: block_rq_issue: 8,0 R 8192 () 32768 + 16 [kworker/0:1H]
scsi_inert_test-1996 [000] ..s1 2047.221007: block_rq_complete: 8,0 R () 32768 + 8 [0]
scsi_inert_test-1996 [000] .Ns1 2047.221045: block_rq_requeue: 8,0 R () 32776 + 8 [0]
kworker/0:1H-339 [000] ...1 2047.221054: block_rq_insert: 8,0 R 4096 () 32776 + 8 [kworker/0:1H]
kworker/0:1H-339 [000] ...1 2047.221056: block_rq_issue: 8,0 R 4096 () 32776 + 8 [kworker/0:1H]
scsi_inert_test-1986 [000] ..s1 2047.221119: block_rq_complete: 8,0 R () 32776 + 8 [0](32768 + 8) was requeued by scsi_queue_insert and had RQF_DONTPREP.
Then it was merged with (32776 + 8) and issued. Due to RQF_DONTPREP,
the sdb only contained the part of (32768 + 8), then only that part
was completed. The lucky thing was that scsi_io_completion detected
it and requeued the remaining part. So we didn't get corrupted data.
However, the requeue of (32776 + 8) is not expected.Suggested-by: Jens Axboe
Signed-off-by: Jianchao Wang
Signed-off-by: Jens Axboe
10 Feb, 2019
1 commit
-
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph, fixing namespace locking when
dealing with the effects log, and a rapid add/remove issue (Keith)- blktrace tweak, ensuring requests with -1 sectors are shown (Jan)
- link power management quirk for a Smasung SSD (Hans)
- m68k nfblock dynamic major number fix (Chengguang)
- series fixing blk-iolatency inflight counter issue (Liu)
- ensure that we clear ->private when setting up the aio kiocb (Mike)
- __find_get_block_slow() rate limit print (Tetsuo)
* tag 'for-linus-20190209' of git://git.kernel.dk/linux-block:
blk-mq: remove duplicated definition of blk_mq_freeze_queue
Blk-iolatency: warn on negative inflight IO counter
blk-iolatency: fix IO hang due to negative inflight counter
blktrace: Show requests without sector
fs: ratelimit __find_get_block_slow() failure message.
m68k: set proper major_num when specifying module param major_num
libata: Add NOLPM quirk for SAMSUNG MZ7TE512HMHP-000L1 SSD
nvme-pci: fix rapid add remove sequence
nvme: lock NS list changes while handling command effects
aio: initialize kiocb private in case any filesystems expect it.
09 Feb, 2019
4 commits
-
As the prototype has been defined in "include/linux/blk-mq.h", the one
in "block/blk-mq.h" can be removed then.Signed-off-by: Liu Bo
Signed-off-by: Jens Axboe -
This is to catch any unexpected negative value of inflight IO counter.
Signed-off-by: Liu Bo
Signed-off-by: Jens Axboe -
Our test reported the following stack, and vmcore showed that
->inflight counter is -1.[ffffc9003fcc38d0] __schedule at ffffffff8173d95d
[ffffc9003fcc3958] schedule at ffffffff8173de26
[ffffc9003fcc3970] io_schedule at ffffffff810bb6b6
[ffffc9003fcc3988] blkcg_iolatency_throttle at ffffffff813911cb
[ffffc9003fcc3a20] rq_qos_throttle at ffffffff813847f3
[ffffc9003fcc3a48] blk_mq_make_request at ffffffff8137468a
[ffffc9003fcc3b08] generic_make_request at ffffffff81368b49
[ffffc9003fcc3b68] submit_bio at ffffffff81368d7d
[ffffc9003fcc3bb8] ext4_io_submit at ffffffffa031be00 [ext4]
[ffffc9003fcc3c00] ext4_writepages at ffffffffa03163de [ext4]
[ffffc9003fcc3d68] do_writepages at ffffffff811c49ae
[ffffc9003fcc3d78] __filemap_fdatawrite_range at ffffffff811b6188
[ffffc9003fcc3e30] filemap_write_and_wait_range at ffffffff811b6301
[ffffc9003fcc3e60] ext4_sync_file at ffffffffa030cee8 [ext4]
[ffffc9003fcc3ea8] vfs_fsync_range at ffffffff8128594b
[ffffc9003fcc3ee8] do_fsync at ffffffff81285abd
[ffffc9003fcc3f18] sys_fsync at ffffffff81285d50
[ffffc9003fcc3f28] do_syscall_64 at ffffffff81003c04
[ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at ffffffff81742b8eThe ->inflight counter may be negative (-1) if
1) blk-iolatency was disabled when the IO was issued,
2) blk-iolatency was enabled before this IO reached its endio,
3) the ->inflight counter is decreased from 0 to -1 in endio()
In fact the hang can be easily reproduced by the below script,
H=/sys/fs/cgroup/unified/
P=/sys/fs/cgroup/unified/testecho "+io" > $H/cgroup.subtree_control
mkdir -p $Pecho $$ > $P/cgroup.procs
xfs_io -f -d -c "pwrite 0 4k" /dev/sdg
echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency
xfs_io -f -d -c "pwrite 0 4k" /dev/sdg
This fixes the problem by freezing the queue so that while
enabling/disabling iolatency, there is no inflight rq running.Note that quiesce_queue is not needed as this only updating iolatency
configuration about which dispatching request_queue doesn't care.Signed-off-by: Liu Bo
Signed-off-by: Jens Axboe -
Pull driver core fixes from Greg KH:
"Here are some driver core fixes for 5.0-rc6.Well, not so much "driver core" as "debugfs". There's a lot of
outstanding debugfs cleanup patches coming in through different
subsystem trees, and in that process the debugfs core was found that
it really should return errors when something bad happens, to prevent
random files from showing up in the root of debugfs afterward. So
debugfs was fixed up to handle this properly, and then two fixes for
the relay and blk-mq code was needed as it was making invalid
assumptions about debugfs return values.There's also a cacheinfo fix in here that resolves a tiny issue.
All of these have been in linux-next for over a week with no reported
problems"* tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
blk-mq: protect debugfs_create_files() from failures
relay: check return of create_buf_file() properly
debugfs: debugfs_lookup() should return NULL if not found
debugfs: return error values, not NULL
debugfs: fix debugfs_rename parameter checking
cacheinfo: Keep the old value if of_property_read_u32 fails
31 Jan, 2019
1 commit
-
If debugfs were to return a non-NULL error for a debugfs call, using
that pointer later in debugfs_create_files() would crash.Fix that by properly checking the pointer before referencing it.
Reported-by: Michal Hocko
Reported-and-tested-by: syzbot+b382ba6a802a3d242790@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa
Signed-off-by: Greg Kroah-Hartman
30 Jan, 2019
2 commits
-
Florian reported a io hung issue when fsync(). It should be
triggered by following race condition.data + post flush a flush
blk_flush_complete_seq
case REQ_FSEQ_DATA
blk_flush_queue_rq
issued to driver blk_mq_dispatch_rq_list
try to issue a flush req
failed due to NON-NCQ command
.queue_rq return BLK_STS_DEV_RESOURCErequest completion
req->end_io // doesn't check RESTART
mq_flush_data_end_io
case REQ_FSEQ_POSTFLUSH
blk_kick_flush
do nothing because previous flush
has not been completed
blk_mq_run_hw_queue
insert rq to hctx->dispatch
due to RESTART is still set, do nothingTo fix this, replace the blk_mq_run_hw_queue in mq_flush_data_end_io
with blk_mq_sched_restart to check and clear the RESTART flag.Fixes: bd166ef1 (blk-mq-sched: add framework for MQ capable IO schedulers)
Reported-by: Florian Stecker
Tested-by: Florian Stecker
Signed-off-by: Jianchao Wang
Signed-off-by: Jens Axboe -
syzbot is hitting flush_work() warning caused by commit 4d43d395fed12463
("workqueue: Try to catch flush_work() without INIT_WORK().") [1].
Although that commit did not expect INIT_WORK(NULL) case, calling
flush_work() without setting a valid callback should be avoided anyway.
Fix this problem by setting a no-op callback instead of NULL.[1] https://syzkaller.appspot.com/bug?id=e390366bc48bc82a7c668326e0663be3b91cbd29
Signed-off-by: Tetsuo Handa
Reported-and-tested-by: syzbot
Cc: Tejun Heo
Signed-off-by: Jens Axboe
27 Jan, 2019
1 commit
-
We can't touch a bio after ->make_request_fn(), for all we know it could
already have been completed by the time this function returns.This reverts commit 698cef173983b086977e633e46476e0f925ca01e.
Reported-by: syzbot+4df6ca820108fd248943@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe
25 Jan, 2019
1 commit
-
This patch avoids that sparse reports the following warnings:
CHECK block/blk-wbt.c
block/blk-wbt.c:600:6: warning: symbol 'wbt_issue' was not declared. Should it be static?
block/blk-wbt.c:620:6: warning: symbol 'wbt_requeue' was not declared. Should it be static?
CC block/blk-wbt.o
block/blk-wbt.c:600:6: warning: no previous prototype for wbt_issue [-Wmissing-prototypes]
void wbt_issue(struct rq_qos *rqos, struct request *rq)
^~~~~~~~~
block/blk-wbt.c:620:6: warning: no previous prototype for wbt_requeue [-Wmissing-prototypes]
void wbt_requeue(struct rq_qos *rqos, struct request *rq)
^~~~~~~~~~~Reviewed-by: Chaitanya Kulkarni
Signed-off-by: Bart Van Assche
Signed-off-by: Jens Axboe
24 Jan, 2019
1 commit
-
Swap REQ_NOWAIT and REQ_NOUNMAP and add REQ_HIPRI.
Acked-by: Jeff Moyer
Signed-off-by: Jianchao Wang
Signed-off-by: Jens Axboe
23 Jan, 2019
1 commit
-
Except for blk_queue_split(), bio_split() is used for splitting bio too,
then the remained bio is often resubmit to queue via generic_make_request().
So the same queue enter recursion exits in this case too. Unfortunatley
commit cd4a4ae4683dc2 doesn't help this case.This patch covers the above case by setting BIO_QUEUE_ENTERED before calling
q->make_request_fn.In theory the per-bio flag is used to simulate one stack variable, it is
just fine to clear it after q->make_request_fn is returned. Especially
the same bio can't be submitted from another context.Fixes: cd4a4ae4683dc2 ("block: don't use blocking queue entered for recursive bio submits")
Cc: Tetsuo Handa
Cc: NeilBrown
Reviewed-by: Mike Snitzer
Signed-off-by: Ming Lei
Signed-off-by: Jens Axboe
18 Jan, 2019
1 commit
-
Remove the imprecise and sloppy:
"This files is licensed under the GPL."
license notice in the top level comment.
1) The file already contains a SPDX license identifier which clearly
states that the license of the file is GPL V2 only2) The notice resolves to GPL v1 or later for scanners which is just
contrary to the intent of SPDX identifiers to provide clear and non
ambiguous license information. Aside of that the value add of this
notice is below zero,Cc: Damien Le Moal
Cc: Matias Bjorling
Cc: Christoph Hellwig
Cc: Jens Axboe
Cc: linux-block@vger.kernel.org
Fixes: 6a5ac9846508 ("block: Make struct request_queue smaller for CONFIG_BLK_DEV_ZONED=n")
Reviewed-by: Bart Van Assche
Signed-off-by: Thomas Gleixner
Signed-off-by: Jens Axboe
16 Jan, 2019
1 commit
-
We need to pass bio->bi_opf after bio intergrity preparing, otherwise
the flag of REQ_INTEGRITY may not be set on the allocated request, then
breaks block integrity.Fixes: f9afca4d367b ("blk-mq: pass in request/bio flags to queue mapping")
Cc: Hannes Reinecke
Cc: Keith Busch
Signed-off-by: Ming Lei
Signed-off-by: Jens Axboe
14 Jan, 2019
1 commit
-
Comments on function __bfq_deactivate_entity contains two imprecise or
wrong statements:
1) The function performs the deactivation of the entity.
2) The function must be invoked only if the entity is on a service tree.This commits replaces both statements with the correct ones:
1) The functions updates sched_data and service trees for the entity,
so as to represent entity as inactive (which is only part of the steps
needed for the deactivation of the entity).
2) The function must be invoked on every entity being deactivated.Signed-off-by: Paolo Valente
Signed-off-by: Jens Axboe
10 Jan, 2019
1 commit
-
Commit 5f0ed774ed29 ("block: sum requests in the plug structure") removed
the request_count parameter from block_attempt_plug_merge(), but did not
remove the associated kerneldoc comment, introducing this warning to the
docs build:./block/blk-core.c:685: warning: Excess function parameter 'request_count' description in 'blk_attempt_plug_merge'
Remove the obsolete description and make things a little quieter.
Signed-off-by: Jonathan Corbet
Signed-off-by: Jens Axboe
09 Jan, 2019
1 commit
-
There was some confusion about what these functions did. Make it clear
that this is a hint for upper layers to pass to the block layer, and
that it does not guarantee that I/O will not be submitted between a
start and finish plug.Reported-by: "Darrick J. Wong"
Reviewed-by: Darrick J. Wong
Reviewed-by: Ming Lei
Signed-off-by: Jeff Moyer
Signed-off-by: Jens Axboe
03 Jan, 2019
1 commit
-
Pull more block updates from Jens Axboe:
- Dead code removal for loop/sunvdc (Chengguang)
- Mark BIDI support for bsg as deprecated, logging a single dmesg
warning if anyone is actually using it (Christoph)- blkcg cleanup, killing a dead function and making the tryget_closest
variant easier to read (Dennis)- Floppy fixes, one fixing a regression in swim3 (Finn)
- lightnvm use-after-free fix (Gustavo)
- gdrom leak fix (Wenwen)
- a set of drbd updates (Lars, Luc, Nathan, Roland)
* tag 'for-4.21/block-20190102' of git://git.kernel.dk/linux-block: (28 commits)
block/swim3: Fix regression on PowerBook G3
block/swim3: Fix -EBUSY error when re-opening device after unmount
block/swim3: Remove dead return statement
block/amiflop: Don't log error message on invalid ioctl
gdrom: fix a memory leak bug
lightnvm: pblk: fix use-after-free bug
block: sunvdc: remove redundant code
block: loop: remove redundant code
bsg: deprecate BIDI support in bsg
blkcg: remove unused __blkg_release_rcu()
blkcg: clean up blkg_tryget_closest()
drbd: Change drbd_request_detach_interruptible's return type to int
drbd: Avoid Clang warning about pointless switch statment
drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")
drbd: skip spurious timeout (ping-timeo) when failing promote
drbd: don't retry connection if peers do not agree on "authentication" settings
drbd: fix print_st_err()'s prototype to match the definition
drbd: avoid spurious self-outdating with concurrent disconnect / down
drbd: do not block when adjusting "disk-options" while IO is frozen
drbd: fix comment typos
...
30 Dec, 2018
1 commit
-
Pull Kconfig updates from Masahiro Yamada:
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
* tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning
kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings
kconfig: add static qualifiers to fix gconf warnings
kconfig: split the lexer out of zconf.y
kconfig: split some C files out of zconf.y
kconfig: convert to SPDX License Identifier
kconfig: remove keyword lookup table entirely
kconfig: update current_pos in the second lexer
kconfig: switch to ASSIGN_VAL state in the second lexer
kconfig: stop associating kconf_id with yylval
kconfig: refactor end token rules
kconfig: stop supporting '.' and '/' in unquoted words
treewide: surround Kconfig file paths with double quotes
microblaze: surround string default in Kconfig with double quotes
kconfig: use T_WORD instead of T_VARIABLE for variables
kconfig: use specific tokens instead of T_ASSIGN for assignments
kconfig: refactor scanning and parsing "option" properties
kconfig: use distinct tokens for type and default properties
kconfig: remove redundant token defines
kconfig: rename depends_list to comment_option_list
...
29 Dec, 2018
2 commits
-
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.Additionally, we have a pile of annotation, unused variable and minor
updates.The big API change is the updates for Christoph's DMA rework which
include removing the DISABLE_CLUSTERING flag.And finally there are a couple of target tree updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
scsi: isci: request: mark expected switch fall-through
scsi: isci: remote_node_context: mark expected switch fall-throughs
scsi: isci: remote_device: Mark expected switch fall-throughs
scsi: isci: phy: Mark expected switch fall-through
scsi: iscsi: Capture iscsi debug messages using tracepoints
scsi: myrb: Mark expected switch fall-throughs
scsi: megaraid: fix out-of-bound array accesses
scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
scsi: fcoe: remove set but not used variable 'port'
scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
scsi: smartpqi: fix build warnings
scsi: smartpqi: update driver version
scsi: smartpqi: add ofa support
scsi: smartpqi: increase fw status register read timeout
scsi: smartpqi: bump driver version
scsi: smartpqi: add smp_utils support
scsi: smartpqi: correct lun reset issues
scsi: smartpqi: correct volume status
scsi: smartpqi: do not offline disks for transient did no connect conditions
scsi: smartpqi: allow for larger raid maps
... -
Pull block updates from Jens Axboe:
"This is the main pull request for block/storage for 4.21.Larger than usual, it was a busy round with lots of goodies queued up.
Most notable is the removal of the old IO stack, which has been a long
time coming. No new features for a while, everything coming in this
week has all been fixes for things that were previously merged.This contains:
- Use atomic counters instead of semaphores for mtip32xx (Arnd)
- Cleanup of the mtip32xx request setup (Christoph)
- Fix for circular locking dependency in loop (Jan, Tetsuo)
- bcache (Coly, Guoju, Shenghui)
* Optimizations for writeback caching
* Various fixes and improvements- nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith)
* host and target support for NVMe over TCP
* Error log page support
* Support for separate read/write/poll queues
* Much improved polling
* discard OOM fallback
* Tracepoint improvements- lightnvm (Hans, Hua, Igor, Matias, Javier)
* Igor added packed metadata to pblk. Now drives without metadata
per LBA can be used as well.
* Fix from Geert on uninitialized value on chunk metadata reads.
* Fixes from Hans and Javier to pblk recovery and write path.
* Fix from Hua Su to fix a race condition in the pblk recovery
code.
* Scan optimization added to pblk recovery from Zhoujie.
* Small geometry cleanup from me.- Conversion of the last few drivers that used the legacy path to
blk-mq (me)- Removal of legacy IO path in SCSI (me, Christoph)
- Removal of legacy IO stack and schedulers (me)
- Support for much better polling, now without interrupts at all.
blk-mq adds support for multiple queue maps, which enables us to
have a map per type. This in turn enables nvme to have separate
completion queues for polling, which can then be interrupt-less.
Also means we're ready for async polled IO, which is hopefully
coming in the next release.- Killing of (now) unused block exports (Christoph)
- Unification of the blk-rq-qos and blk-wbt wait handling (Josef)
- Support for zoned testing with null_blk (Masato)
- sx8 conversion to per-host tag sets (Christoph)
- IO priority improvements (Damien)
- mq-deadline zoned fix (Damien)
- Ref count blkcg series (Dennis)
- Lots of blk-mq improvements and speedups (me)
- sbitmap scalability improvements (me)
- Make core inflight IO accounting per-cpu (Mikulas)
- Export timeout setting in sysfs (Weiping)
- Cleanup the direct issue path (Jianchao)
- Export blk-wbt internals in block debugfs for easier debugging
(Ming)- Lots of other fixes and improvements"
* tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits)
kyber: use sbitmap add_wait_queue/list_del wait helpers
sbitmap: add helpers for add/del wait queue handling
block: save irq state in blkg_lookup_create()
dm: don't reuse bio for flushes
nvme-pci: trace SQ status on completions
nvme-rdma: implement polling queue map
nvme-fabrics: allow user to pass in nr_poll_queues
nvme-fabrics: allow nvmf_connect_io_queue to poll
nvme-core: optionally poll sync commands
block: make request_to_qc_t public
nvme-tcp: fix spelling mistake "attepmpt" -> "attempt"
nvme-tcp: fix endianess annotations
nvmet-tcp: fix endianess annotations
nvme-pci: refactor nvme_poll_irqdisable to make sparse happy
nvme-pci: only set nr_maps to 2 if poll queues are supported
nvmet: use a macro for default error location
nvmet: fix comparison of a u16 with -1
blk-mq: enable IO poll if .nr_queues of type poll > 0
blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
blk-mq: skip zero-queue maps in blk_mq_map_swqueue
...
21 Dec, 2018
5 commits
-
Besides the OSD command set that never got traction, the only SCSI
command using bidirectional buffers is XDWRITEREAD in the 10 and 32 byte
variants, which is extremely esoteric and has been removed from the spec
again as of SBC4r15. It probably doesn't make sense to keep the support
code around just for that, so start deprecating the support.Signed-off-by: Christoph Hellwig
Signed-off-by: Jens Axboe -
An earlier commit 7fcf2b033b84 ("blkcg: change blkg reference counting
to use percpu_ref") moved around the release call from blkg_put() to be
a part of the percpu_ref cleanup. Remove the additional unused code
which should have been removed earlier.Signed-off-by: Dennis Zhou
Signed-off-by: Jens Axboe -
The implementation of blkg_tryget_closest() wasn't super obvious and
became a point of suspicion when debugging [1]. So let's clean it up so
it's obviously not the problem.Also add missing RCU read locking to bio_clone_blkg_association(), which
got exposed by adding the RCU read lock held check in
blkg_tryget_closest().[1] https://lore.kernel.org/linux-block/a7e97e4b-0dd8-3a54-23b7-a0f27b17fde8@kernel.dk/
Signed-off-by: Dennis Zhou
Signed-off-by: Jens Axboe -
The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
support bare file paths in the source statement.I do not see a good reason to complicate Kconfig for the room of
ambiguity.The majority of code already surrounds file paths with double quotes,
and it makes sense since file paths are constant string literals.Make it treewide consistent now.
Signed-off-by: Masahiro Yamada
Acked-by: Wolfram Sang
Acked-by: Geert Uytterhoeven
Acked-by: Ingo Molnar -
sbq_wake_ptr() checks sbq->ws_active to know if it needs to loop
the wait indexes or not. This requires the use of the sbitmap
waitqueue wrappers, but kyber doesn't use those for its domain
token waitqueue handling.Convert kyber to use the helpers. This fixes a hang with waiting
for domain tokens.Fixes: 5d2ee7122c73 ("sbitmap: optimize wakeup check")
Tested-by: Ming Lei
Reported-by: Ming Lei
Reviewed-by: Omar Sandoval
Signed-off-by: Jens Axboe
20 Dec, 2018
1 commit
-
blkg_lookup_create() may be called from pool_map() in which
irq state is saved, so we have to do that in blkg_lookup_create().Otherwise, the following lockdep warning can be triggered:
[ 104.258537] ================================
[ 104.259129] WARNING: inconsistent lock state
[ 104.259725] 4.20.0-rc6+ #545 Not tainted
[ 104.260268] --------------------------------
[ 104.260865] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[ 104.261727] swapper/49/0 [HC0[0]:SC1[1]:HE0:SE0] takes:
[ 104.262444] 00000000db365b5d (&(&pool->lock)->rlock#3){+.?.}, at: thin_endio+0xcf/0x2a3 [dm_thin_pool]
[ 104.263747] {SOFTIRQ-ON-W} state was registered at:
[ 104.264417] _raw_spin_unlock_irq+0x29/0x4c
[ 104.265014] blkg_lookup_create+0xdc/0xe6
[ 104.265609] bio_associate_blkg_from_css+0xd3/0x13f
[ 104.266312] bio_associate_blkg+0x15a/0x1bb
[ 104.266913] pool_map+0xe8/0x103 [dm_thin_pool]
[ 104.267572] __map_bio+0x98/0x29c [dm_mod]
[ 104.268162] __split_and_process_non_flush+0x29e/0x306 [dm_mod]
[ 104.269003] __split_and_process_bio+0x16a/0x25b [dm_mod]
[ 104.269971] __dm_make_request.isra.14+0xdc/0x124 [dm_mod]
[ 104.270973] generic_make_request+0x3f5/0x68b
[ 104.271676] process_prepared_mapping+0x166/0x1ef [dm_thin_pool]
[ 104.272531] schedule_zero+0x239/0x273 [dm_thin_pool]
[ 104.273245] process_cell+0x60c/0x6f1 [dm_thin_pool]
[ 104.273967] do_worker+0x60c/0xca8 [dm_thin_pool]
[ 104.274635] process_one_work+0x4eb/0x834
[ 104.275203] worker_thread+0x318/0x484
[ 104.275740] kthread+0x1d1/0x1e1
[ 104.276203] ret_from_fork+0x3a/0x50
[ 104.276714] irq event stamp: 170003
[ 104.277201] hardirqs last enabled at (170002): [] _raw_spin_unlock_irqrestore+0x44/0x6b
[ 104.278535] hardirqs last disabled at (170003): [] _raw_spin_lock_irqsave+0x20/0x55
[ 104.280273] softirqs last enabled at (169978): [] irq_enter+0x4c/0x73
[ 104.281617] softirqs last disabled at (169979): [] irq_exit+0x7e/0x11d
[ 104.282744]
[ 104.282744] other info that might help us debug this:
[ 104.283640] Possible unsafe locking scenario:
[ 104.283640]
[ 104.284452] CPU0
[ 104.284803] ----
[ 104.285150] lock(&(&pool->lock)->rlock#3);
[ 104.285762]
[ 104.286130] lock(&(&pool->lock)->rlock#3);
[ 104.286750]
[ 104.286750] *** DEADLOCK ***
[ 104.286750]
[ 104.287564] no locks held by swapper/49/0.
[ 104.288129]
[ 104.288129] stack backtrace:
[ 104.288738] CPU: 49 PID: 0 Comm: swapper/49 Not tainted 4.20.0-rc6+ #545
[ 104.289700] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014
[ 104.290858] Call Trace:
[ 104.291204]
[ 104.291502] dump_stack+0x9a/0xe6
[ 104.291968] mark_lock+0x56c/0x7a6
[ 104.292442] ? check_usage_backwards+0x209/0x209
[ 104.293086] __lock_acquire+0x400/0x15bf
[ 104.293662] ? check_chain_key+0x150/0x1aa
[ 104.294236] lock_acquire+0x1a6/0x1e3
[ 104.294768] ? thin_endio+0xcf/0x2a3 [dm_thin_pool]
[ 104.295444] ? _raw_spin_unlock_irqrestore+0x44/0x6b
[ 104.296143] ? process_prepared_discard_fail+0x36/0x36 [dm_thin_pool]
[ 104.297031] _raw_spin_lock_irqsave+0x46/0x55
[ 104.297659] ? thin_endio+0xcf/0x2a3 [dm_thin_pool]
[ 104.298335] thin_endio+0xcf/0x2a3 [dm_thin_pool]
[ 104.298997] ? process_prepared_discard_fail+0x36/0x36 [dm_thin_pool]
[ 104.299886] ? check_flags+0x20a/0x20a
[ 104.300408] ? lock_acquire+0x1a6/0x1e3
[ 104.300954] ? process_prepared_discard_fail+0x36/0x36 [dm_thin_pool]
[ 104.301865] clone_endio+0x1bb/0x22d [dm_mod]
[ 104.302491] ? disable_write_zeroes+0x20/0x20 [dm_mod]
[ 104.303200] ? bio_disassociate_blkg+0xc6/0x15f
[ 104.303836] ? bio_endio+0x2b2/0x2da
[ 104.304349] clone_endio+0x1f3/0x22d [dm_mod]
[ 104.304978] ? disable_write_zeroes+0x20/0x20 [dm_mod]
[ 104.305709] ? bio_disassociate_blkg+0xc6/0x15f
[ 104.306333] ? bio_endio+0x2b2/0x2da
[ 104.306853] clone_endio+0x1f3/0x22d [dm_mod]
[ 104.307476] ? disable_write_zeroes+0x20/0x20 [dm_mod]
[ 104.308185] ? bio_disassociate_blkg+0xc6/0x15f
[ 104.308817] ? bio_endio+0x2b2/0x2da
[ 104.309319] blk_update_request+0x2de/0x4cc
[ 104.309927] blk_mq_end_request+0x2a/0x183
[ 104.310498] blk_done_softirq+0x16a/0x1a6
[ 104.311051] ? blk_softirq_cpu_dead+0xe2/0xe2
[ 104.311653] ? __lock_is_held+0x2a/0x87
[ 104.312186] __do_softirq+0x250/0x4e8
[ 104.312705] irq_exit+0x7e/0x11d
[ 104.313157] call_function_single_interrupt+0xf/0x20
[ 104.313860]
[ 104.314163] RIP: 0010:native_safe_halt+0x2/0x3
[ 104.314792] Code: 63 02 df f0 83 44 24 fc 00 48 89 df e8 cc 3f 7a ff 48 8b 03 a8 08 74 0b 65 81 25 9d 31 45 7e ff ff ff 7f 5b 5d 41 5c c3 fb f4 f4 c3 0f 1f 44 00 00 41 56 41 55 41 54 55 53 e8 a2 0d 5c ff e8
[ 104.317339] RSP: 0018:ffff888106c9fdc0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff04
[ 104.318390] RAX: 1ffff11020d92100 RBX: 0000000000000000 RCX: ffffffff81159ac7
[ 104.319366] RDX: 1ffffffff05d5e69 RSI: 0000000000000007 RDI: ffff888106c90d1c
[ 104.320339] RBP: 0000000000000000 R08: dffffc0000000000 R09: 0000000000000001
[ 104.321313] R10: ffffed1025d57ba0 R11: ffffed1025d57b9f R12: 1ffff11020d93fbf
[ 104.322328] R13: 0000000000000031 R14: ffff888106c90040 R15: 0000000000000000
[ 104.323307] ? lockdep_hardirqs_on+0x26b/0x278
[ 104.323927] default_idle+0xd9/0x1a8
[ 104.324427] do_idle+0x162/0x2b2
[ 104.324891] ? arch_cpu_idle_exit+0x28/0x28
[ 104.325467] ? mark_held_locks+0x28/0x7f
[ 104.326031] ? _raw_spin_unlock_irqrestore+0x44/0x6b
[ 104.326719] cpu_startup_entry+0x1d/0x1f
[ 104.327261] start_secondary+0x2cb/0x308
[ 104.327806] ? set_cpu_sibling_map+0x8a3/0x8a3
[ 104.328421] secondary_startup_64+0xa4/0xb0Fixes: b978962ad4f7f9 ("blkcg: update blkg_lookup_create() to do locking")
Cc: Mike Snitzer
Cc: Dennis Zhou
Signed-off-by: Ming Lei
Signed-off-by: Jens Axboe
19 Dec, 2018
2 commits
-
Now that the the SCSI layer replaced the use of the cluster flag with
segment size limits and the DMA boundary we can remove the cluster flag
from the block layer.Signed-off-by: Christoph Hellwig
Reviewed-by: Jens Axboe
Signed-off-by: Martin K. Petersen -
block consumers will need it for polling requests that
are sent with blk_execute_rq_nowait. Also, get rid of
blk_tag_to_qc_t and open-code it instead.Reviewed-by: Jens Axboe
Signed-off-by: Sagi Grimberg
Signed-off-by: Christoph Hellwig
18 Dec, 2018
6 commits
-
The queue mapping of type poll only exists when set->map[HCTX_TYPE_POLL].nr_queues
is bigger than zero, so enhance the constraint by checking .nr_queues of type poll
before enabling IO poll.Otherwise IO race & timeout can be observed when running block/007.
Cc: Jeff Moyer
Cc: Christoph Hellwig
Signed-off-by: Ming Lei
Signed-off-by: Jens Axboe -
There's a single user of this function, dm, and dm just wants
to check if IO is inflight, not that it's just allocated.This fixes a hang with srp/002 in blktests with dm, where it tries
to suspend but waits for inflight IO to finish first. As it checks
for just allocated requests, this fails.Tested-by: Mike Snitzer
Signed-off-by: Jens Axboe -
From 7e849dd9cf37 ("nvme-pci: don't share queue maps"), the mapping
table won't be initialized actually if map->nr_queues is zero, so
we can't use blk_mq_map_queue_type() to retrieve hctx any more.This way still may cause broken mapping, fix it by skipping zero-queues
maps in blk_mq_map_swqueue().Cc: Jeff Moyer
Cc: Mike Snitzer
Reviewed-by: Christoph Hellwig
Signed-off-by: Ming Lei
Signed-off-by: Jens Axboe -
The blk-iolatency controller measures the time from rq_qos_throttle() to
rq_qos_done_bio() and attributes this time to the first bio that needs
to create the request. This means if a bio is plug-mergeable or
bio-mergeable, it gets to bypass the blk-iolatency controller.The recent series [1], to tag all bios w/ blkgs undermined how iolatency
was determining which bios it was charging and should process in
rq_qos_done_bio(). Because all bios are being tagged, this caused the
atomic_t for the struct rq_wait inflight count to underflow and result
in a stall.This patch adds a new flag BIO_TRACKED to let controllers know that a
bio is going through the rq_qos path. blk-iolatency now checks if this
flag is set to see if it should process the bio in rq_qos_done_bio().Overloading BLK_QUEUE_ENTERED works, but makes the flag rules confusing.
BIO_THROTTLED was another candidate, but the flag is set for all bios
that have gone through blk-throttle code. Overloading a flag comes with
the burden of making sure that when either implementation changes, a
change in setting rules for one doesn't cause a bug in the other. So
here, we unfortunately opt for adding a new flag.[1] https://lore.kernel.org/lkml/20181205171039.73066-1-dennis@kernel.org/
Fixes: 5cdf2e3fea5e ("blkcg: associate blkg when associating a device")
Signed-off-by: Dennis Zhou
Cc: Josef Bacik
Signed-off-by: Jens Axboe -
When a request is added to rq list of sw queue(ctx), the rq may be from
a different type of hctx, especially after multi queue mapping is
introduced.So when dispach request from sw queue via blk_mq_flush_busy_ctxs() or
blk_mq_dequeue_from_ctx(), one request belonging to other queue type of
hctx can be dispatched to current hctx in case that read queue or poll
queue is enabled.This patch fixes this issue by introducing per-queue-type list.
Cc: Christoph Hellwig
Signed-off-by: Ming LeiChanged by me to not use separately cacheline aligned lists, just
place them all in the same cacheline where we had just the one list
and lock before.Signed-off-by: Jens Axboe
-
For a zoned block device using mq-deadline, if a write request for a
zone is received while another write was already dispatched for the same
zone, dd_dispatch_request() will return NULL and the newly inserted
write request is kept in the scheduler queue waiting for the ongoing
zone write to complete. With this behavior, when no other request has
been dispatched, rq_list in blk_mq_sched_dispatch_requests() is empty
and blk_mq_sched_mark_restart_hctx() not called. This in turn leads to
__blk_mq_free_request() call of blk_mq_sched_restart() to not run the
queue when the already dispatched write request completes. The newly
dispatched request stays stuck in the scheduler queue until eventually
another request is submitted.This problem does not affect SCSI disk as the SCSI stack handles queue
restart on request completion. However, this problem is can be triggered
the nullblk driver with zoned mode enabled.Fix this by always requesting a queue restart in dd_dispatch_request()
if no request was dispatched while WRITE requests are queued.Fixes: 5700f69178e9 ("mq-deadline: Introduce zone locking support")
Cc:
Signed-off-by: Damien Le MoalAdd missing export of blk_mq_sched_restart()
Signed-off-by: Jens Axboe
17 Dec, 2018
3 commits
-
We should check if a given queue map actually has queues enabled before
dispatching to it. This allows drivers to not initialize optional but
not used map types, which subsequently will allow fixing problems with
queue map rebuilds for that case.Reviewed-by: Ming Lei
Signed-off-by: Christoph Hellwig
Signed-off-by: Jens Axboe -
Now we only export hctx->type via sysfs, and there isn't such info
in hctx entry under debugfs. We often use debugfs only to diagnose
queue mapping issue, so add the support in debugfs.Queue mapping becomes a bit more complicated after multiple queue
mapping is supported, we may write blktest to verify if queue mapping
is valid based on blk-mq-debugfs.Given not necessary to export hctx->type twice, so remove the export
from sysfs.Cc: Jeff Moyer
Cc: Mike Snitzer
Reviewed-by: Christoph Hellwig
Signed-off-by: Ming Lei
Signed-off-by: Jens Axboe -
Type of each element in queue mapping table is 'unsigned int,
intead of 'struct blk_mq_queue_map)', so fix it.Cc: Jeff Moyer
Cc: Mike Snitzer
Cc: Christoph Hellwig
Reviewed-by: Christoph Hellwig
Signed-off-by: Ming Lei
Signed-off-by: Jens Axboe