17 Oct, 2007
6 commits
-
Driver for the CompactFlash slot on the PA Semi Electra eval board. It's
a simple device sitting on localbus, with interrupts and detect/voltage
control over GPIO.The driver is implemented as an of_platform driver, and adds localbus
as a bus being probed by the of_platform framework.[akpm@linux-foundation.org: cleanups]
[olof@lixom.net: fix build]
Signed-off-by: Olof Johansson
Cc: Christoph Hellwig
Cc: Milton Miller
Cc: Kumar Gala
Cc: Benjamin Herrenschmidt
Cc: Paul Mackerras
Cc: Dominik Brodowski
Signed-off-by: Olof Johansson
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Most non cardbus devices can't do dma, so flag them as such in the device
creation routine.Signed-off-by: James Bottomley
Cc: Andi Kleen
Cc: Alan Cox
Cc: Tejun Heo
Cc: Natalie Protasevich
Cc: Jeff Garzik
Cc: Dominik Brodowski
Cc: Russell King
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Based on a patch by Haavard Skinnemoen posted to linux-pcmcia, but using
static inlines for readability reasons. this should fix PCMCIA an AVR32Signed-off-by: Daniel Ritz
Cc: Haavard Skinnemoen
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Only a few definitions is in xxs1500.h .
They can be move to au1000_xxs1500.c .[m.kozlowski@tuxland.pl: fix unbalanced parenthesis]
Signed-off-by: Yoichi Yuasa
Cc: Ralf Baechle
Cc: Dominik Brodowski
Signed-off-by: Mariusz Kozlowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Recently I've been trying to get working PCMCIA interface on H5000 ipaq
series, using dual PCMCIA sleeve. So far things work correctly, but I had
to do one modification to drivers/pcmcia/pxa2xx_base.c to get the interface
working with orinoco gold PCMCIA card (wired pcnet_cs ethernet card worked
even without this modification).The issue has something to do with assert time on PCMCIA bus, but I'm not
really sure what -- I found the working value just by trial&error approach.
I'm not sure how is the assert value in pxa2xx_mcxx_asst calculated (I
know, simple formula, but the reason why is it calculated that way is not
obvious for me), neither that my modification is correct. It just works
with iPAQ.Cc: Russell King
Cc: Richard Purdie
Cc: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.Signed-off-by: Jan Engelhardt
Cc: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
16 Oct, 2007
4 commits
-
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits)
[ARM] 4578/1: CM-x270: PCMCIA support
[ARM] 4577/1: ITE 8152 PCI bridge support
[ARM] 4576/1: CM-X270 machine support
[ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()
[ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c
[ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c
[ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols
[ARM] pxa: PXA3xx base support
[NET] smc91x: fix PXA DMA support code
[SERIAL] Fix console initialisation ordering
[ARM] pxa: tidy up arch/arm/mach-pxa/Makefile
[ARM] Update arch/arm/Kconfig for drivers/Kconfig changes
[ARM] 4600/1: fix kernel build failure with build-id-supporting binutils
[ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23)
[ARM] Rename consistent_sync() as dma_cache_maint()
[ARM] 4572/1: ep93xx: add cirrus logic edb9307 support
[ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support
[ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32
[ARM] 4594/1: ns9xxx: use the new gpio functions
[ARM] 4593/1: ns9xxx: implement generic clockevents
... -
This patch provides support for PCMCIA on CM-X270
Signed-off-by: Mike Rapoport
Signed-off-by: Russell King -
Signed-off-by: Russell King
-
Signed-off-by: Russell King
15 Oct, 2007
1 commit
-
... should be unsigned int
Signed-off-by: Al Viro
Signed-off-by: Linus Torvalds
13 Oct, 2007
2 commits
-
This changes the uevent buffer functions to use a struct instead of a
long list of parameters. It does no longer require the caller to do the
proper buffer termination and size accounting, which is currently wrong
in some places. It fixes a known bug where parts of the uevent
environment are overwritten because of wrong index calculations.Many thanks to Mathieu Desnoyers for finding bugs and improving the
error handling.Signed-off-by: Kay Sievers
Cc: Mathieu Desnoyers
Cc: Cornelia Huck
Signed-off-by: Greg Kroah-Hartman -
Prefix platform modalias strings with "platform:", which
modprobe config to blacklist alias resolving if userspace
configures it.Send uevents for all platform devices.
Add MODULE_ALIAS's to: pxa2xx_pcmcia, ds1742 and pcspkr to trigger
module autoloading by userspace.$ modinfo pcspkr
alias: platform:pcspkr
license: GPL
description: PC Speaker beeper driver
...$ modprobe -n -v platform:pcspkr
insmod /lib/modules/2.6.23-rc3-g28e8351a-dirty/kernel/drivers/input/misc/pcspkr.koSigned-off-by: Kay Sievers
Cc: David Brownell
Cc: Atsushi Nemoto
Signed-off-by: Greg Kroah-Hartman
01 Aug, 2007
1 commit
-
Give sockets up to 100ms of additional time to power down. otherwise we
might generate false warnings with KERN_ERR priority (like in bug #8262).Signed-off-by: Daniel Ritz
Cc: Nils Neumann
Cc:
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
22 Jul, 2007
1 commit
-
Signed-off-by: Stephen Rothwell
Acked-by: David S. Miller
Signed-off-by: Paul Mackerras
19 Jul, 2007
1 commit
-
This patch (as933) removes the deprecated dpm_runtime_suspend() and
dpm_runtime_resume() routines from the PM core. The only user of
those routines is the PCMCIA ds driver; local replacements are added.Signed-off-by: Alan Stern
CC: Dominik Brodowski
Signed-off-by: Greg Kroah-Hartman
18 Jul, 2007
2 commits
-
Rolling forward PCMCIA driver, it was discovered that the indentation in
existing one, as well as in BSP side are very odd. This patch is just result
of Lindent run ontop of culprit files.Signed-off-by: Vitaly Bordug
Cc: Arnd Bergmann
Cc: Olof Johansson
Cc: Dominik Brodowski
Cc: Paul Mackerras
Cc: Benjamin Herrenschmidt
Cc: Kumar Gala
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves. This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.The patch causes all kernel threads to be nonfreezable by default (ie. to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE. It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear. Additionally, it updates documentation to
describe the freezing of tasks more accurately.[akpm@linux-foundation.org: build fixes]
Signed-off-by: Rafael J. Wysocki
Acked-by: Nigel Cunningham
Cc: Pavel Machek
Cc: Oleg Nesterov
Cc: Gautham R Shenoy
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Jul, 2007
1 commit
-
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (209 commits)
[POWERPC] Create add_rtc() function to enable the RTC CMOS driver
[POWERPC] Add H_ILLAN_ATTRIBUTES hcall number
[POWERPC] xilinxfb: Parameterize xilinxfb platform device registration
[POWERPC] Oprofile support for Power 5++
[POWERPC] Enable arbitary speed tty ioctls and split input/output speed
[POWERPC] Make drivers/char/hvc_console.c:khvcd() static
[POWERPC] Remove dead code for preventing pread() and pwrite() calls
[POWERPC] Remove unnecessary #undef printk from prom.c
[POWERPC] Fix typo in Ebony default DTS
[POWERPC] Check for NULL ppc_md.init_IRQ() before calling
[POWERPC] Remove extra return statement
[POWERPC] pasemi: Don't auto-select CONFIG_EMBEDDED
[POWERPC] pasemi: Rename platform
[POWERPC] arch/powerpc/kernel/sysfs.c: Move NUMA exports
[POWERPC] Add __read_mostly support for powerpc
[POWERPC] Modify sched_clock() to make CONFIG_PRINTK_TIME more sane
[POWERPC] Create a dummy zImage if no valid platform has been selected
[POWERPC] PS3: Bootwrapper support.
[POWERPC] powermac i2c: Use mutex
[POWERPC] Schedule removal of arch/ppc
...Fixed up conflicts manually in:
Documentation/feature-removal-schedule.txt
arch/powerpc/kernel/pci_32.c
arch/powerpc/kernel/pci_64.c
include/asm-powerpc/pci.hand asked the powerpc people to double-check the result..
12 Jul, 2007
2 commits
-
Well, first of all, I don't want to change so many files either.
What I do:
Adding a new parameter "struct bin_attribute *" in the
.read/.write methods for the sysfs binary attributes.In fact, only the four lines change in fs/sysfs/bin.c and
include/linux/sysfs.h do the real work.
But I have to update all the files that use binary attributes
to make them compatible with the new .read and .write methods.
I'm not sure if I missed any. :(Why I do this:
For a sysfs attribute, we can get a pointer pointing to the
struct attribute in the .show/.store method,
while we can't do this for the binary attributes.
I don't know why this is different, but this does make it not
so handy to use the binary attributes as the regular ones.
So I think this patch is reasonable. :)Who benefits from it:
The patch that exposes ACPI tables in sysfs
requires such an improvement.
All the table binary attributes share the same .read method.
Parameter "struct bin_attribute *" is used to get
the table signature and instance number which are used to
distinguish different ACPI table binary attributes.Without this parameter, we need to offer different .read methods
for different ACPI table binary attributes.
This is impossible as there are various ACPI tables on different
platforms, and we don't know what they are until they are loaded.Signed-off-by: Zhang Rui
Signed-off-by: Greg Kroah-Hartman -
sysfs is now completely out of driver/module lifetime game. After
deletion, a sysfs node doesn't access anything outside sysfs proper,
so there's no reason to hold onto the attribute owners. Note that
often the wrong modules were accounted for as owners leading to
accessing removed modules.This patch kills now unnecessary attribute->owner. Note that with
this change, userland holding a sysfs node does not prevent the
backing module from being unloaded.For more info regarding lifetime rule cleanup, please read the
following message.http://article.gmane.org/gmane.linux.kernel/510293
(tweaked by Greg to not delete the field just yet, to make it easier to
merge things properly.)Signed-off-by: Tejun Heo
Cc: Cornelia Huck
Cc: Andrew Morton
Signed-off-by: Greg Kroah-Hartman
10 Jul, 2007
1 commit
-
Adds support for PowerQuicc on-chip PCMCIA. The driver is implemented as
of_device, so only arch/powerpc stuff is capable to use it, which now implies
only mpc885ads reference board.To cope with the code that should be hooked inside driver, but is really board
specific (like set_voltage), global structure mpc8xx_pcmcia_ops holds
necessary function pointers that are filled in the BSP code.[akpm@linux-foundation.org: whitespace diddles]
Signed-off-by: Vitaly Bordug
Acked-by: Arnd Bergmann
Acked-by: Olof Johansson
Cc: Dominik Brodowski
Cc: Paul Mackerras
Cc: Benjamin Herrenschmidt
Signed-off-by: Andrew Morton
Signed-off-by: Kumar Gala
31 May, 2007
1 commit
-
Fix enable_irq_wake and disable_irq_wake symmetry in at91 pcmcia driver
disable_irq_wake call must be symmetric with enable_irq_wake. This patch
fix that problem for the at91_pcmia driver. It seems that this patch was
forgotten when we've fixed irq_wake symmetry in all at91 related drivers.
It was discussed in the "at91 drivers and [enable/disable]_irq_wake
(wrong?) usage" thread on the linux-arm-kernel mailing list.Signed-off-by: Marc Pignat
Cc: David Brownell
Cc: Russell King
Cc: Pavel Machek
Cc: "Rafael J. Wysocki"
Cc: Andrew Victor
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
09 May, 2007
1 commit
-
We've had various reports of some legacy "probe the hardware" style
platform drivers having nasty problems with hotplug support.The core issue is that those legacy drivers don't fully conform to the
driver model. They assume a role that should be the responsibility of
infrastructure code: creating device nodes.The "modprobe" step in hotplugging relies on drivers to have split those
roles into different modules. The lack of this split causes the problems.
When a driver creates nodes for devices that don't exist (sending a hotplug
event), then exits (aborting one modprobe) before the "modprobe $MODALIAS"
step completes (by failing, since it's in the middle of a modprobe), the
result can be an endless loop of modprobe invocations ... badness.This fix uses the newish per-device flag controlling issuance of "add"
events. (A previous version of this patch used a per-device "driver can
hotplug" flag, which only scrubbed $MODALIAS from the environment rather
than suppressing the entire hotplug event.) It also shrinks that flag to
one bit, saving a word in "struct device".So the net of this patch is removing some nasty failures with legacy
drivers, while retaining hotplug capability for the majority of platform
drivers.Signed-off-by: David Brownell
Cc: Greg KH
Cc: Andres Salomon
Cc: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
08 May, 2007
2 commits
-
PCI drivers have the new_id file in sysfs which allows new IDs to be added
at runtime. The advantage is to avoid re-compilation of a driver that
works for a new device, but it's ID table doesn't contain the new device.
This mechanism is only meant for testing, after the driver has been tested
successfully, the ID should be added in source code so that new revisions
of the kernel automatically detect the device.The implementation follows the PCI implementation. The interface is documented
in Documentation/pcmcia/driver.txt. Computations should be done in userspace,
so the sysfs string contains the raw structure members for matching.Signed-off-by: Bernhard Walle
Cc: Dominik Brodowski
Cc: Greg KH
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This is a minor correctness fix: since the at91_cf driver probe() routine
is in the init section, it should use platform_driver_probe() instead of
leaving that pointer around in the driver struct after init section
removal.Signed-off-by: David Brownell
Cc: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
03 May, 2007
1 commit
-
I noticed that many source files include while they do
not appear to need it. Here is an attempt to clean it all up.In order to find all possibly affected files, I searched for all
files including but without any other occurence of "pci"
or "PCI". I removed the include statement from all of these, then I
compiled an allmodconfig kernel on both i386 and x86_64 and fixed the
false positives manually.My tests covered 66% of the affected files, so there could be false
positives remaining. Untested files are:arch/alpha/kernel/err_common.c
arch/alpha/kernel/err_ev6.c
arch/alpha/kernel/err_ev7.c
arch/ia64/sn/kernel/huberror.c
arch/ia64/sn/kernel/xpnet.c
arch/m68knommu/kernel/dma.c
arch/mips/lib/iomap.c
arch/powerpc/platforms/pseries/ras.c
arch/ppc/8260_io/enet.c
arch/ppc/8260_io/fcc_enet.c
arch/ppc/8xx_io/enet.c
arch/ppc/syslib/ppc4xx_sgdma.c
arch/sh64/mach-cayman/iomap.c
arch/xtensa/kernel/xtensa_ksyms.c
arch/xtensa/platform-iss/setup.c
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-mpc.c
drivers/media/video/saa711x.c
drivers/misc/hdpuftrs/hdpu_cpustate.c
drivers/misc/hdpuftrs/hdpu_nexus.c
drivers/net/au1000_eth.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fec_8xx/fec_mii.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/fs_enet/mac-fcc.c
drivers/net/fs_enet/mac-fec.c
drivers/net/fs_enet/mac-scc.c
drivers/net/fs_enet/mii-bitbang.c
drivers/net/fs_enet/mii-fec.c
drivers/net/ibm_emac/ibm_emac_core.c
drivers/net/lasi_82596.c
drivers/parisc/hppb.c
drivers/sbus/sbus.c
drivers/video/g364fb.c
drivers/video/platinumfb.c
drivers/video/stifb.c
drivers/video/valkyriefb.c
include/asm-arm/arch-ixp4xx/dma.h
sound/oss/au1550_ac97.cI would welcome test reports for these files. I am fine with removing
the untested files from the patch if the general opinion is that these
changes aren't safe. The tested part would still be nice to have.Note that this patch depends on another header fixup patch I submitted
to LKML yesterday:
[PATCH] scatterlist.h needs types.h
http://lkml.org/lkml/2007/3/01/141Signed-off-by: Jean Delvare
Cc: Badari Pulavarty
Signed-off-by: Greg Kroah-Hartman
09 Apr, 2007
1 commit
-
Convert omap_cf into a platform_driver ... this resolves oopsing during
suspend/resume.Evidently folk haven't tried suspend/resume on an OSK (the main platform
for this driver) since September or so, which is when platform_device
learned about suspend_late()/resume_early() and stopped being able to
suspend/resume without a platform_driver.Signed-off-by: David Brownell
Cc: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
28 Mar, 2007
1 commit
-
drivers/pcmcia/au1000_generic.c: In function 'au1x00_pcmcia_socket_probe':
drivers/pcmcia/au1000_generic.c:375: error: 'struct device' has no member named 'dev'Signed-off-by: Yoichi Yuasa
Cc: Ralf Baechle
Cc: Jaroslav Kysela
Cc: Takashi Iwai
Cc: Greg KH
Cc: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
24 Feb, 2007
1 commit
-
More fallout from the PCMCIA class_device changes.
The first hunk is run-tested on SH-4, the others are converted
in the spirit of the original conversion.Signed-off-by: Manuel Lauss
Signed-off-by: Greg Kroah-Hartman
20 Feb, 2007
1 commit
-
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits)
Documentation/kernel-docs.txt update.
arch/cris: typo in KERN_INFO
Storage class should be before const qualifier
kernel/printk.c: comment fix
update I/O sched Kconfig help texts - CFQ is now default, not AS.
Remove duplicate listing of Cris arch from README
kbuild: more doc. cleanups
doc: make doc. for maxcpus= more visible
drivers/net/eexpress.c: remove duplicate comment
add a help text for BLK_DEV_GENERIC
correct a dead URL in the IP_MULTICAST help text
fix the BAYCOM_SER_HDX help text
fix SCSI_SCAN_ASYNC help text
trivial documentation patch for platform.txt
Fix typos concerning hierarchy
Fix comment typo "spin_lock_irqrestore".
Fix misspellings of "agressive".
drivers/scsi/a100u2w.c: trivial typo patch
Correct trivial typo in log2.h.
Remove useless FIND_FIRST_BIT() macro from cardbus.c.
...
18 Feb, 2007
1 commit
-
Delete the definition of the unused FIND_FIRST_BIT() macro.
Signed-off-by: Robert P. J. Day
Signed-off-by: Adrian Bunk
17 Feb, 2007
1 commit
-
As found on some arm defconfigs.
I only looked at how original patch changes things and other patches fix
compilation. ;-)Signed-off-by: Alexey Dobriyan
Cc: Dominik Brodowski
Cc: Russell King
Signed-off-by: Andrew Morton
Signed-off-by: Greg Kroah-Hartman
15 Feb, 2007
1 commit
-
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there. Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm. I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).Signed-off-by: Tim Schmielau
Acked-by: Russell King
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
13 Feb, 2007
1 commit
-
Many struct file_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.Signed-off-by: Arjan van de Ven
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
10 Feb, 2007
1 commit
-
Signed-off-by: Al Viro
Signed-off-by: Linus Torvalds
08 Feb, 2007
1 commit
-
Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.Cc:
Signed-off-by: Greg Kroah-Hartman
14 Dec, 2006
1 commit
-
All kcalloc() calls of the form "kcalloc(1,...)" are converted to the
equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect
ordering of the first two arguments are fixed.Signed-off-by: Robert P. J. Day
Cc: Jeff Garzik
Cc: Alan Cox
Cc: Dominik Brodowski
Cc: Adam Belay
Cc: James Bottomley
Cc: Greg KH
Cc: Mark Fasheh
Cc: Trond Myklebust
Cc: Neil Brown
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
09 Dec, 2006
1 commit
-
Signed-off-by: Josef Sipek
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
08 Dec, 2006
1 commit
-
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (76 commits)
[ARM] 4002/1: S3C24XX: leave parent IRQs unmasked
[ARM] 4001/1: S3C24XX: shorten reboot time
[ARM] 3983/2: remove unused argument to __bug()
[ARM] 4000/1: Osiris: add third serial port in
[ARM] 3999/1: RX3715: suspend to RAM support
[ARM] 3998/1: VR1000: LED platform devices
[ARM] 3995/1: iop13xx: add iop13xx support
[ARM] 3968/1: iop13xx: add iop13xx_defconfig
[ARM] Update mach-types
[ARM] Allow gcc to optimise arm_add_memory a little more
[ARM] 3991/1: i.MX/MX1 high resolution time source
[ARM] 3990/1: i.MX/MX1 more precise PLL decode
[ARM] 3986/1: H1940: suspend to RAM support
[ARM] 3985/1: ixp4xx clocksource cleanup
[ARM] 3984/1: ixp4xx/nslu2: Fix disk LED numbering (take 2)
[ARM] 3994/1: ixp23xx: fix handling of pci master aborts
[ARM] 3981/1: sched_clock for PXA2xx
[ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to 63 bit
[ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period
[ARM] 3978/1: macro to provide a 63-bit value from a 32-bit hardware counter
...
