28 Jul, 2011
1 commit
-
Add support for Philips SA56004, an LM86 compatible temperature sensor.
Signed-off-by: Stijn Devriendt
Signed-off-by: Guenter Roeck
29 Apr, 2011
2 commits
-
The lm90 driver's attribute update interval is configurable.
Reflect this information in the driver documentation.Signed-off-by: Guenter Roeck
Signed-off-by: Jean Delvare -
This patch adds support for ADT7461A and NCT1008 to the lm90 driver.
Both chips have identical functionality and report the same manufacturing ID
and device ID values.Signed-off-by: Guenter Roeck
Signed-off-by: Jean Delvare
29 Oct, 2010
4 commits
-
I was wondering if that chip ever existed publicly... Apparently yes,
so add support for it.Signed-off-by: Jean Delvare
Tested-by: Alexander Stein
Acked-by: Guenter Roeck -
Signed-off-by: Guenter Roeck
Signed-off-by: Jean Delvare -
Signed-off-by: Guenter Roeck
Signed-off-by: Jean Delvare -
Signed-off-by: Guenter Roeck
Signed-off-by: Jean Delvare
06 Mar, 2010
2 commits
-
Tested successfully with an ADM1032 chip on its evaluation board. It
should work fine with all other chips as well.At this point this is more of a proof-of-concept, we don't do anything
terribly useful on SMBus alert: we simply log the event. But this could
later evolve into libsensors signaling so that user-space applications
can take an appropriate action.Signed-off-by: Jean Delvare
Cc: David Brownell
Cc: Trent Piepho -
This chips is found on several Zotac Ion ITX boards, amongst others.
Signed-off-by: Jean Delvare
Cc: MC Matti
Cc: Manuel Lamotte-Schubert
12 Mar, 2009
1 commit
-
Update documentation to prevent further confusion/duplication.
Signed-off-by: Darrick J. Wong
Signed-off-by: Jean Delvare
27 Oct, 2008
1 commit
-
The LM99 differs from the LM86, LM89 and LM90 in that it reports
remote temperatures (temp2) 16 degrees lower than they really are. So
far we have been cheating and handled this in userspace but it really
should be handled by the driver directly.Signed-off-by: Jean Delvare
Cc: Matthew Garrett
17 Oct, 2008
4 commits
-
These Maxim chips are similar to MAX6657 but use unsigned temperature
values to allow for readings up to 145 degrees.Signed-off-by: Ben Hutchings
Signed-off-by: Jean Delvare -
Support ADT7461 in extended temperature range mode, which will change
the range of readings from 0..127 to -64..191 degC. Adjust the
register conversion functions accordingly.Signed-off-by: Nate Case
Signed-off-by: Jean Delvare
Tested-by: Martyn Welch -
Update the links to the datasheet of some of the devices supported by
the lm90 driver. Also remove the links from the driver itself, so that
we don't have to update them twice each time they change.Signed-off-by: Jean Delvare
Acked-by: Martyn Welch -
The Maxim MAX6657, MAX6658 and MAX6659 have extra resolution bits for
the local temperature measurement. Let the lm90 driver read them and
export them to user-space.Signed-off-by: Jean Delvare
Acked-by: Martyn Welch
20 Jul, 2007
2 commits
-
Signed-off-by: Rainer Birkenmaier
Signed-off-by: Jean Delvare -
Signed-off-by: Jean Delvare
29 Oct, 2005
2 commits
-
Update the I2C addresses for the ADM1032 and ADT7461 chips.
Also update the links to the Analog Devices web site.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Add PEC support to the lm90 driver. Only the ADM1032 chip supports it,
and in a rather tricky way, which is why this patch comes with
documentation reinforcements. At least, this demonstrates that the new
PEC support logic in i2c-core can properly deal with chips with partial
PEC support.As enabling PEC causes a significant performance drop, it can be
disabled through a sysfs file (unsurprisingly named "pec").Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
12 Jul, 2005
1 commit
-
Part 3: Move the drivers documentation, plus two general documentation
files.Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman