03 Nov, 2011

1 commit


26 Aug, 2011

1 commit

  • Replace/remove use of RIO v.1.2 registers/bits that are not
    forward-compatible with newer versions of RapidIO specification.

    RapidIO specification v.1.3 removed Write Port CSR, Doorbell CSR,
    Mailbox CSR and Mailbox and Doorbell bits of the PEF CAR.

    Use of removed (since RIO v.1.3) register bits affects users of
    currently available 1.3 and 2.x compliant devices who may use not so
    recent kernel versions.

    Removing checks for unsupported bits makes corresponding routines
    compatible with all versions of RapidIO specification. Therefore,
    backporting makes stable kernel versions compliant with RIO v.1.3 and
    later as well.

    Signed-off-by: Alexandre Bounine
    Cc: Kumar Gala
    Cc: Matt Porter
    Cc: Li Yang
    Cc: Thomas Moll
    Cc: Chul Kim
    Cc:
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Alexandre Bounine
     

06 Jul, 2011

1 commit


05 Jul, 2011

1 commit


29 Jun, 2011

1 commit


23 May, 2011

1 commit


24 Mar, 2011

2 commits

  • Subsystem initialization sequence modified to support presence of multiple
    RapidIO controllers in the system. The new sequence is compatible with
    initialization of PCI devices.

    Signed-off-by: Alexandre Bounine
    Cc: Kumar Gala
    Cc: Matt Porter
    Cc: Li Yang
    Cc: Thomas Moll
    Cc: Micha Nelissen
    Cc: Benjamin Herrenschmidt
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Alexandre Bounine
     
  • 1. Add an option to include RapidIO support if the PCI is available.
    2. Add FSL_RIO configuration option to enable controller selection.
    3. Add RapidIO support option into x86 and MIPS architectures.

    Signed-off-by: Alexandre Bounine
    Acked-by: Kumar Gala
    Cc: Matt Porter
    Cc: Li Yang
    Cc: Thomas Moll
    Cc: Micha Nelissen
    Cc: Benjamin Herrenschmidt
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Alexandre Bounine
     

27 Sep, 2010

1 commit


30 Mar, 2010

1 commit

  • …it slab.h inclusion from percpu.h

    percpu.h is included by sched.h and module.h and thus ends up being
    included when building most .c files. percpu.h includes slab.h which
    in turn includes gfp.h making everything defined by the two files
    universally available and complicating inclusion dependencies.

    percpu.h -> slab.h dependency is about to be removed. Prepare for
    this change by updating users of gfp and slab facilities include those
    headers directly instead of assuming availability. As this conversion
    needs to touch large number of source files, the following script is
    used as the basis of conversion.

    http://userweb.kernel.org/~tj/misc/slabh-sweep.py

    The script does the followings.

    * Scan files for gfp and slab usages and update includes such that
    only the necessary includes are there. ie. if only gfp is used,
    gfp.h, if slab is used, slab.h.

    * When the script inserts a new include, it looks at the include
    blocks and try to put the new include such that its order conforms
    to its surrounding. It's put in the include block which contains
    core kernel includes, in the same order that the rest are ordered -
    alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
    doesn't seem to be any matching order.

    * If the script can't find a place to put a new include (mostly
    because the file doesn't have fitting include block), it prints out
    an error message indicating which .h file needs to be added to the
    file.

    The conversion was done in the following steps.

    1. The initial automatic conversion of all .c files updated slightly
    over 4000 files, deleting around 700 includes and adding ~480 gfp.h
    and ~3000 slab.h inclusions. The script emitted errors for ~400
    files.

    2. Each error was manually checked. Some didn't need the inclusion,
    some needed manual addition while adding it to implementation .h or
    embedding .c file was more appropriate for others. This step added
    inclusions to around 150 files.

    3. The script was run again and the output was compared to the edits
    from #2 to make sure no file was left behind.

    4. Several build tests were done and a couple of problems were fixed.
    e.g. lib/decompress_*.c used malloc/free() wrappers around slab
    APIs requiring slab.h to be added manually.

    5. The script was run on all .h files but without automatically
    editing them as sprinkling gfp.h and slab.h inclusions around .h
    files could easily lead to inclusion dependency hell. Most gfp.h
    inclusion directives were ignored as stuff from gfp.h was usually
    wildly available and often used in preprocessor macros. Each
    slab.h inclusion directive was examined and added manually as
    necessary.

    6. percpu.h was updated not to include slab.h.

    7. Build test were done on the following configurations and failures
    were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
    distributed build env didn't work with gcov compiles) and a few
    more options had to be turned off depending on archs to make things
    build (like ipr on powerpc/64 which failed due to missing writeq).

    * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
    * powerpc and powerpc64 SMP allmodconfig
    * sparc and sparc64 SMP allmodconfig
    * ia64 SMP allmodconfig
    * s390 SMP allmodconfig
    * alpha SMP allmodconfig
    * um on x86_64 SMP allmodconfig

    8. percpu.h modifications were reverted so that it could be applied as
    a separate patch and serve as bisection point.

    Given the fact that I had only a couple of failures from tests on step
    6, I'm fairly confident about the coverage of this conversion patch.
    If there is a breakage, it's likely to be something in one of the arch
    headers which should be easily discoverable easily on most builds of
    the specific arch.

    Signed-off-by: Tejun Heo <tj@kernel.org>
    Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
    Cc: Ingo Molnar <mingo@redhat.com>
    Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

    Tejun Heo
     

21 Sep, 2009

1 commit


06 Jul, 2009

2 commits


16 Apr, 2009

1 commit


27 Feb, 2009

1 commit


13 Nov, 2008

1 commit

  • We have some reasons to kill netdev->priv:
    1. netdev->priv is equal to netdev_priv().
    2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously
    netdev_priv() is more flexible than netdev->priv.
    But we cann't kill netdev->priv, because so many drivers reference to it
    directly.

    This patch is a safe convert for netdev->priv to netdev_priv(netdev).
    Since all of the netdev->priv is only for read.
    But it is too big to be sent in one mail.
    I split it to 4 parts and make every part smaller than 100,000 bytes,
    which is max size allowed by vger.

    Signed-off-by: Wang Chen
    Signed-off-by: David S. Miller

    Wang Chen
     

28 Oct, 2008

1 commit

  • This converts pretty much everything to print_mac. There were
    a few things that had conflicts which I have just dropped for
    now, no harm done.

    I've built an allyesconfig with this and looked at the files
    that weren't built very carefully, but it's a huge patch.

    Signed-off-by: Johannes Berg
    Signed-off-by: David S. Miller

    Johannes Berg
     

29 Apr, 2008

1 commit

  • The RapidIO system size will auto probe in RIO setup. The route table
    and rionet_active in rionet.c are changed to be allocated dynamically
    according to the size of the system.

    Signed-off-by: Zhang Wei
    Signed-off-by: Andrew Morton
    Signed-off-by: Paul Mackerras

    Zhang Wei
     

11 Oct, 2007

3 commits

  • This is nicer than the MAC_FMT stuff.

    Signed-off-by: Joe Perches
    Signed-off-by: David S. Miller

    Joe Perches
     
  • We now have struct net_device_stats embedded in struct net_device,
    and the default ->get_stats() hook does the obvious thing for us.

    Run through drivers/net/* and remove the driver-local storage of
    statistics, and driver-local ->get_stats() hook where applicable.

    This was just the low-hanging fruit in drivers/net; plenty more drivers
    remain to be updated.

    [ Resolved conflicts with napi_struct changes and fix sunqe build
    regression... -DaveM ]

    Signed-off-by: Jeff Garzik
    Signed-off-by: David S. Miller

    Jeff Garzik
     
  • It's been a useless no-op for long enough in 2.6 so I figured it's time to
    remove it. The number of people that could object because they're
    maintaining unified 2.4 and 2.6 drivers is probably rather small.

    [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ]

    Signed-off-by: Ralf Baechle
    Signed-off-by: Jeff Garzik
    Signed-off-by: David S. Miller

    Ralf Baechle
     

26 Apr, 2007

1 commit


14 Sep, 2006

1 commit


14 Sep, 2005

1 commit

  • Adds an "Ethernet" driver which sends Ethernet packets over the standard
    RapidIO messaging. This depends on the core RIO patch for mailbox/doorbell
    access.

    Signed-off-by: Matt Porter
    Cc: Jeff Garzik
    Signed-off-by: Andrew Morton
    Signed-off-by: Jeff Garzik

    Matt Porter