11 Apr, 2020
17 commits
-
Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL
but required to define quite similar fallback stubs for special page
table entry helpers such as pte_special() and pte_mkspecial(), as they
get build in generic MM without a config check. This creates two
generic fallback stub definitions for these helpers, eliminating much
code duplication.mips platform has a special case where pte_special() and pte_mkspecial()
visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires.
This restricts those symbol visibility in order to avoid redefinitions
which is now exposed through this new generic stubs and subsequent build
failure. arm platform set_pte_at() definition needs to be moved into a
C file just to prevent a build failure.[anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas]
Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual
Signed-off-by: Andrew Morton
Acked-by: Guo Ren [csky]
Acked-by: Geert Uytterhoeven [m68k]
Acked-by: Stafford Horne [openrisc]
Acked-by: Helge Deller [parisc]
Cc: Richard Henderson
Cc: Ivan Kokshaysky
Cc: Matt Turner
Cc: Russell King
Cc: Brian Cain
Cc: Tony Luck
Cc: Fenghua Yu
Cc: Sam Creasey
Cc: Michal Simek
Cc: Ralf Baechle
Cc: Paul Burton
Cc: Nick Hu
Cc: Greentime Hu
Cc: Vincent Chen
Cc: Ley Foon Tan
Cc: Jonas Bonn
Cc: Stefan Kristiansson
Cc: "James E.J. Bottomley"
Cc: "David S. Miller"
Cc: Jeff Dike
Cc: Richard Weinberger
Cc: Anton Ivanov
Cc: Guan Xuetao
Cc: Chris Zankel
Cc: Max Filippov
Cc: Thomas Bogendoerfer
Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds -
There are many places where all basic VMA access flags (read, write,
exec) are initialized or checked against as a group. One such example
is during page fault. Existing vma_is_accessible() wrapper already
creates the notion of VMA accessibility as a group access permissions.Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which
will not only reduce code duplication but also extend the VMA
accessibility concept in general.Signed-off-by: Anshuman Khandual
Signed-off-by: Andrew Morton
Reviewed-by: Vlastimil Babka
Cc: Russell King
Cc: Catalin Marinas
Cc: Mark Salter
Cc: Nick Hu
Cc: Ley Foon Tan
Cc: Michael Ellerman
Cc: Heiko Carstens
Cc: Yoshinori Sato
Cc: Guan Xuetao
Cc: Dave Hansen
Cc: Thomas Gleixner
Cc: Rob Springer
Cc: Greg Kroah-Hartman
Cc: Geert Uytterhoeven
Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds -
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS. While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms. Apart from simplification, this
reduces code duplication as well.Signed-off-by: Anshuman Khandual
Signed-off-by: Andrew Morton
Reviewed-by: Vlastimil Babka
Acked-by: Geert Uytterhoeven
Cc: Richard Henderson
Cc: Vineet Gupta
Cc: Russell King
Cc: Catalin Marinas
Cc: Mark Salter
Cc: Guo Ren
Cc: Yoshinori Sato
Cc: Brian Cain
Cc: Tony Luck
Cc: Michal Simek
Cc: Ralf Baechle
Cc: Paul Burton
Cc: Nick Hu
Cc: Ley Foon Tan
Cc: Jonas Bonn
Cc: "James E.J. Bottomley"
Cc: Michael Ellerman
Cc: Paul Walmsley
Cc: Heiko Carstens
Cc: Rich Felker
Cc: "David S. Miller"
Cc: Guan Xuetao
Cc: Thomas Gleixner
Cc: Jeff Dike
Cc: Chris Zankel
Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds -
Add the ability to insert multiple pages at once to a user VM with lower
PTE spinlock operations.The intention of this patch-set is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.[akpm@linux-foundation.org: pte_alloc() no longer takes the `addr' argument]
[arjunroy@google.com: add missing page_count() check to vm_insert_pages()]
Link: http://lkml.kernel.org/r/20200214005929.104481-1-arjunroy.kdev@gmail.com
[arjunroy@google.com: vm_insert_pages() checks if pte_index defined]
Link: http://lkml.kernel.org/r/20200228054714.204424-2-arjunroy.kdev@gmail.com
Signed-off-by: Arjun Roy
Signed-off-by: Eric Dumazet
Signed-off-by: Soheil Hassas Yeganeh
Signed-off-by: Andrew Morton
Cc: David Miller
Cc: Matthew Wilcox
Cc: Jason Gunthorpe
Cc: Stephen Rothwell
Link: http://lkml.kernel.org/r/20200128025958.43490-2-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds -
pte_index() is either defined as a macro (e.g. sparc64) or as an
inlined function (e.g. x86). vm_insert_pages() depends on pte_index
but it is not defined on all platforms (e.g. m68k).To fix compilation of vm_insert_pages() on architectures not providing
pte_index(), we perform the following fix:0. For platforms where it is meaningful, and defined as a macro, no
change is needed.
1. For platforms where it is meaningful and defined as an inlined
function, and we want to use it with vm_insert_pages(), we define
a degenerate macro of the form: #define pte_index pte_index
2. vm_insert_pages() checks for the existence of a pte_index macro
definition. If found, it implements a batched insert. If not found,
it devolves to calling vm_insert_page() in a loop.This patch implements step 1 for x86.
v3 of this patch fixes a compilation warning for an unused method.
v2 of this patch moved a macro definition to a more readable location.Signed-off-by: Arjun Roy
Signed-off-by: Andrew Morton
Cc: David Miller
Cc: Eric Dumazet
Cc: Jason Gunthorpe
Cc: Matthew Wilcox
Cc: Soheil Hassas Yeganeh
Cc: Stephen Rothwell
Link: http://lkml.kernel.org/r/20200228054714.204424-1-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds -
pte_index() on platforms other than sparc return a numerical index. On
sparc, it returns a pte_t*. This presents an issue for
vm_insert_pages(), which relies on pte_index() to find the offset for a
pte within a pmd, for batched inserts.This patch:
1. Modifies pte_index() for sparc to return a numerical index, like
other platforms,
2. Defines pte_entry() for sparc which returns a pte_t*
(as pte_index() used to),
3. Converts existing sparc callers for pte_index() to use pte_entry().[sfr@canb.auug.org.au: remove pte_entry and just directly modified pte_offset_kernel instead]
Signed-off-by: Arjun Roy
Signed-off-by: Stephen Rothwell
Signed-off-by: Andrew Morton
Reviewed-by: Mike Rapoport
Cc: Eric Dumazet
Cc: Soheil Hassas Yeganeh
Cc: David Miller
Cc: Matthew Wilcox
Cc: Arjun Roy
Cc: Jason Gunthorpe
Link: http://lkml.kernel.org/r/20200227105045.6b421d9f@canb.auug.org.au
Signed-off-by: Linus Torvalds -
Add helper methods for vm_insert_page()/insert_page() to prepare for
vm_insert_pages(), which batch-inserts pages to reduce spinlock
operations when inserting multiple consecutive pages into the user page
table.The intention of this patch-set is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.Signed-off-by: Arjun Roy
Signed-off-by: Eric Dumazet
Signed-off-by: Soheil Hassas Yeganeh
Signed-off-by: Andrew Morton
Cc: David Miller
Cc: Matthew Wilcox
Cc: Jason Gunthorpe
Cc: Stephen Rothwell
Link: http://lkml.kernel.org/r/20200128025958.43490-1-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds -
On passing requirement to vm_unmapped_area, arch_get_unmapped_area and
arch_get_unmapped_area_topdown did not set align_offset. Internally on
both unmapped_area and unmapped_area_topdown, if info->align_mask is 0,
then info->align_offset was meaningless.But commit df529cabb7a2 ("mm: mmap: add trace point of
vm_unmapped_area") always prints info->align_offset even though it is
uninitialized.Fix this uninitialized value issue by setting it to 0 explicitly.
Before:
vm_unmapped_area: addr=0x755b155000 err=0 total_vm=0x15aaf0 flags=0x1 len=0x109000 lo=0x8000 hi=0x75eed48000 mask=0x0 ofs=0x4022After:
vm_unmapped_area: addr=0x74a4ca1000 err=0 total_vm=0x168ab1 flags=0x1 len=0x9000 lo=0x8000 hi=0x753d94b000 mask=0x0 ofs=0x0Signed-off-by: Jaewon Kim
Signed-off-by: Andrew Morton
Reviewed-by: Andrew Morton
Cc: Matthew Wilcox (Oracle)
Cc: Michel Lespinasse
Cc: Borislav Petkov
Link: http://lkml.kernel.org/r/20200409094035.19457-1-jaewon31.kim@samsung.com
Signed-off-by: Linus Torvalds -
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma areaIn this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepagesIf the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!Signed-off-by: Roman Gushchin
Signed-off-by: Andrew Morton
Tested-by: Andreas Schaufler
Acked-by: Mike Kravetz
Acked-by: Michal Hocko
Cc: Aslan Bakirov
Cc: Randy Dunlap
Cc: Rik van Riel
Cc: Joonsoo Kim
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds -
I've noticed that there is no interface exposed by CMA which would let
me to declare contigous memory on particular NUMA node.This patchset adds the ability to try to allocate contiguous memory on a
specific node. It will fallback to other nodes if the specified one
doesn't work.Implement a new method for declaring contigous memory on particular node
and keep cma_declare_contiguous() as a wrapper.[akpm@linux-foundation.org: build fix]
Signed-off-by: Aslan Bakirov
Signed-off-by: Roman Gushchin
Signed-off-by: Andrew Morton
Acked-by: Michal Hocko
Cc: Andreas Schaufler
Cc: Mike Kravetz
Cc: Rik van Riel
Cc: Joonsoo Kim
Link: http://lkml.kernel.org/r/20200407163840.92263-2-guro@fb.com
Signed-off-by: Linus Torvalds -
Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can
exceed the inode size. Ocfs2 now doesn't allow that offset beyond inode
size. This restriction is not necessary and violates fallocate(2)
semantics.If fallocate(2) offset is beyond inode size, just return success and do
nothing further.Otherwise, ocfs2 will crash the kernel.
kernel BUG at fs/ocfs2//alloc.c:7264!
ocfs2_truncate_inline+0x20f/0x360 [ocfs2]
ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2]
__ocfs2_change_file_space+0x4a5/0x650 [ocfs2]
ocfs2_fallocate+0x83/0xa0 [ocfs2]
vfs_fallocate+0x148/0x230
SyS_fallocate+0x48/0x80
do_syscall_64+0x79/0x170Signed-off-by: Changwei Ge
Signed-off-by: Andrew Morton
Reviewed-by: Joseph Qi
Cc: Mark Fasheh
Cc: Joel Becker
Cc: Junxiao Bi
Cc: Changwei Ge
Cc: Gang He
Cc: Jun Piao
Cc:
Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com
Signed-off-by: Linus Torvalds -
Fix the following sparse warning:
mm/page_alloc.c:106:1: warning: symbol 'pcpu_drain_mutex' was not declared. Should it be static?
mm/page_alloc.c:107:1: warning: symbol '__pcpu_scope_pcpu_drain' was not declared. Should it be static?Reported-by: Hulk Robot
Signed-off-by: Jason Yan
Signed-off-by: Andrew Morton
Link: http://lkml.kernel.org/r/20200407023925.46438-1-yanaijie@huawei.com
Signed-off-by: Linus Torvalds -
Add description of function parameter 'mt' to fix kernel-doc warning:
mm/page_alloc.c:3246: warning: Function parameter or member 'mt' not described in '__putback_isolated_page'
Signed-off-by: Randy Dunlap
Signed-off-by: Andrew Morton
Acked-by: Pankaj Gupta
Link: http://lkml.kernel.org/r/02998bd4-0b82-2f15-2570-f86130304d1e@infradead.org
Signed-off-by: Linus Torvalds -
There is a typo at the cross-reference link, causing this warning:
include/linux/slab.h:11: WARNING: undefined label: memory-allocation (if the link has no caption the label must precede a section header)
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Cc: Jonathan Corbet
Cc: Christoph Lameter
Cc: Pekka Enberg
Cc: David Rientjes
Cc: Joonsoo Kim
Link: http://lkml.kernel.org/r/0aeac24235d356ebd935d11e147dcc6edbb6465c.1586359676.git.mchehab+huawei@kernel.org
Signed-off-by: Linus Torvalds -
There is a typo in comment, fix it.
s/eariler/earlier/Signed-off-by: Qiujun Huang
Signed-off-by: Andrew Morton
Reviewed-by: Andrew Morton
Acked-by: Christoph Lameter
Link: http://lkml.kernel.org/r/20200405160544.1246-1-hqjagain@gmail.com
Signed-off-by: Linus Torvalds -
If a cgroup violates its memory.high constraints, we may end up unduly
penalising it. For example, for the following hierarchy:A: max high, 20 usage
A/B: 9 high, 10 usage
A/C: max high, 10 usageWe would end up doing the following calculation below when calculating
high delay for A/B:A/B: 10 - 9 = 1...
A: 20 - PAGE_COUNTER_MAX = 21, so set max_overage to 21.This gets worse with higher disparities in usage in the parent.
I have no idea how this disappeared from the final version of the patch,
but it is certainly Not Good(tm). This wasn't obvious in testing because,
for a simple cgroup hierarchy with only one child, the result is usually
roughly the same. It's only in more complex hierarchies that things go
really awry (although still, the effects are limited to a maximum of 2
seconds in schedule_timeout_killable at a maximum).[chris@chrisdown.name: changelog]
Fixes: e26733e0d0ec ("mm, memcg: throttle allocators based on ancestral memory.high")
Signed-off-by: Jakub Kicinski
Signed-off-by: Chris Down
Signed-off-by: Andrew Morton
Acked-by: Michal Hocko
Cc: Johannes Weiner
Cc: [5.4.x]
Link: http://lkml.kernel.org/r/20200331152424.GA1019937@chrisdown.name
Signed-off-by: Linus Torvalds -
When removing files containing extended attributes, the hfsplus driver may
remove the wrong entries from the attributes b-tree, causing major
filesystem damage and in some cases even kernel crashes.To remove a file, all its extended attributes have to be removed as well.
The driver does this by looking up all keys in the attributes b-tree with
the cnid of the file. Each of these entries then gets deleted using the
key used for searching, which doesn't contain the attribute's name when it
should. Since the key doesn't contain the name, the deletion routine will
not find the correct entry and instead remove the one in front of it. If
parent nodes have to be modified, these become corrupt as well. This
causes invalid links and unsorted entries that not even macOS's fsck_hfs
is able to fix.To fix this, modify the search key before an entry is deleted from the
attributes b-tree by copying the found entry's key into the search key,
therefore ensuring that the correct entry gets removed from the tree.Signed-off-by: Simon Gander
Signed-off-by: Andrew Morton
Reviewed-by: Anton Altaparmakov
Cc:
Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com
Signed-off-by: Linus Torvalds
10 Apr, 2020
5 commits
-
Pull module updates from Jessica Yu:
"Only a small cleanup this time around: a trivial conversion of
zero-length arrays to flexible arrays"* tag 'modules-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kernel: module: Replace zero-length array with flexible-array member -
Pull arm64 fixes from Catalin Marinas:
- Ensure that the compiler and linker versions are aligned so that ld
doesn't complain about not understanding a .note.gnu.property section
(emitted when pointer authentication is enabled).- Force -mbranch-protection=none when the feature is not enabled, in
case a compiler may choose a different default value.- Remove CONFIG_DEBUG_ALIGN_RODATA. It was never in defconfig and
rarely enabled.- Fix checking 16-bit Thumb-2 instructions checking mask in the
emulation of the SETEND instruction (it could match the bottom half
of a 32-bit Thumb-2 instruction).* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
arm64: remove CONFIG_DEBUG_ALIGN_RODATA feature
arm64: Always force a branch protection mode when the compiler has one
arm64: Kconfig: ptrauth: Add binutils version check to fix mismatch
init/kconfig: Add LD_VERSION Kconfig -
Pull more powerpc updates from Michael Ellerman:
"The bulk of this is the series to make CONFIG_COMPAT user-selectable,
it's been around for a long time but was blocked behind the
syscall-in-C series.Plus there's also a few fixes and other minor things.
Summary:
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and
turn it off by default for ppc64le where it's not used.- A few other miscellaneous fixes and small improvements.
Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
Nicholas Piggin, Stephen Boyd, Wen Xiong"* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Always build the tm-poison test 64-bit
powerpc: Improve ppc_save_regs()
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
powerpc/time: Replace by
powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
powerpc/perf: split callchain.c by bitness
powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
powerpc/64: make buildable without CONFIG_COMPAT
powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
powerpc/perf: consolidate read_user_stack_32
powerpc: move common register copy functions from signal_32.c to signal.c
powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
powerpc/ps3: Remove an unneeded NULL check
powerpc/ps3: Remove duplicate error message
powerpc/powernv: Re-enable imc trace-mode in kernel
powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
powerpc/pseries: Fix MCE handling on pseries
selftests/eeh: Skip ahci adapters
powerpc/64s: Fix doorbell wakeup msgclr optimisation -
Pull m68knommu update from Greg Ungerer:
"Only a single commit, to remove all use of the obsolete setup_irq()
calls within the m68knommu architecture code"* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: Replace setup_irq() by request_irq() -
Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of new features:- Partial support for the Kendryte K210.
There are still a few outstanding issues that I have patches for,
but I don't actually have a board to test them so they're not
included yet.- SBI v0.2 support.
- Fixes to support for building with LLVM-based toolchains. The
resulting images are known not to boot yet.I don't anticipate a part two, but I'll probably have something early
in the RCs to finish up the K210 support"* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
riscv: create a loader.bin boot image for Kendryte SoC
riscv: Kendryte K210 default config
riscv: Add Kendryte K210 device tree
riscv: Select required drivers for Kendryte SOC
riscv: Add Kendryte K210 SoC support
riscv: Add SOC early init support
riscv: Unaligned load/store handling for M_MODE
RISC-V: Support cpu hotplug
RISC-V: Add supported for ordered booting method using HSM
RISC-V: Add SBI HSM extension definitions
RISC-V: Export SBI error to linux error mapping function
RISC-V: Add cpu_ops and modify default booting method
RISC-V: Move relocate and few other functions out of __init
RISC-V: Implement new SBI v0.2 extensions
RISC-V: Introduce a new config for SBI v0.1
RISC-V: Add SBI v0.2 extension definitions
RISC-V: Add basic support for SBI v0.2
RISC-V: Mark existing SBI as 0.1 SBI.
riscv: Use macro definition instead of magic number
riscv: Add support to dump the kernel page tables
...
09 Apr, 2020
13 commits
-
Pull 9p documentation update from Dominique Martinet:
"Document the new O_NONBLOCK short read behavior"* tag '9p-for-5.7-2' of git://github.com/martinetd/linux:
9p: document short read behaviour with O_NONBLOCK -
Pull ceph updates from Ilya Dryomov:
"The main items are:- support for asynchronous create and unlink (Jeff Layton).
Creates and unlinks are satisfied locally, without waiting for a
reply from the MDS, provided the client has been granted
appropriate caps (new in v15.y.z ("Octopus") release). This can be
a big help for metadata heavy workloads such as tar and rsync.
Opt-in with the new nowsync mount option.- multiple blk-mq queues for rbd (Hannes Reinecke and myself).
When the driver was converted to blk-mq, we settled on a single
blk-mq queue because of a global lock in libceph and some other
technical debt. These have since been addressed, so allocate a
queue per CPU to enhance parallelism.- don't hold onto caps that aren't actually needed (Zheng Yan).
This has been our long-standing behavior, but it causes issues with
some active/standby applications (synchronous I/O, stalls if the
standby goes down, etc).- .snap directory timestamps consistent with ceph-fuse (Luis
Henriques)"* tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client: (49 commits)
ceph: fix snapshot directory timestamps
ceph: wait for async creating inode before requesting new max size
ceph: don't skip updating wanted caps when cap is stale
ceph: request new max size only when there is auth cap
ceph: cleanup return error of try_get_cap_refs()
ceph: return ceph_mdsc_do_request() errors from __get_parent()
ceph: check all mds' caps after page writeback
ceph: update i_requested_max_size only when sending cap msg to auth mds
ceph: simplify calling of ceph_get_fmode()
ceph: remove delay check logic from ceph_check_caps()
ceph: consider inode's last read/write when calculating wanted caps
ceph: always renew caps if mds_wanted is insufficient
ceph: update dentry lease for async create
ceph: attempt to do async create when possible
ceph: cache layout in parent dir on first sync create
ceph: add new MDS req field to hold delegated inode number
ceph: decode interval_sets for delegated inos
ceph: make ceph_fill_inode non-static
ceph: perform asynchronous unlink if we have sufficient caps
ceph: don't take refs to want mask unless we have all bits
... -
Pull overlayfs update from Miklos Szeredi:
- Fix failure to copy-up files from certain NFSv4 mounts
- Sort out inconsistencies between st_ino and i_ino (used in /proc/locks)
- Allow consistent (POSIX-y) inode numbering in more cases
- Allow virtiofs to be used as upper layer
- Miscellaneous cleanups and fixes
* tag 'ovl-update-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: document xino expected behavior
ovl: enable xino automatically in more cases
ovl: avoid possible inode number collisions with xino=on
ovl: use a private non-persistent ino pool
ovl: fix WARN_ON nlink drop to zero
ovl: fix a typo in comment
ovl: replace zero-length array with flexible-array member
ovl: ovl_obtain_alias(): don't call d_instantiate_anon() for old
ovl: strict upper fs requirements for remote upper fs
ovl: check if upper fs supports RENAME_WHITEOUT
ovl: allow remote upper
ovl: decide if revalidate needed on a per-dentry basis
ovl: separate detection of remote upper layer from stacked overlay
ovl: restructure dentry revalidation
ovl: ignore failure to copy up unknown xattrs
ovl: document permission model
ovl: simplify i_ino initialization
ovl: factor out helper ovl_get_root()
ovl: fix out of date comment and unreachable code
ovl: fix value of i_ino for lower hardlink corner case -
Pull iomap fix from Darrick Wong:
"Fix a problem in readahead where we can crash if we can't allocate a
full bio due to GFP_NORETRY"* tag 'iomap-5.7-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Handle memory allocation failure in readahead -
Pull crypto fixes from Herbert Xu:
"This fixes a Kconfig dependency for hisilicon as well as a double free
in marvell/octeontx"* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: marvell/octeontx - fix double free of ptr
crypto: hisilicon - Fix build error -
Pull watchdog updates from Wim Van Sebroeck:
- add TI K3 RTI watchdog
- add stop_on_reboot parameter to control reboot policy
- wm831x_wdt: Remove GPIO handling
- several small fixes, improvements and clean-ups
* tag 'linux-watchdog-5.7-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Add K3 RTI watchdog support
dt-bindings: watchdog: Add support for TI K3 RTI watchdog
watchdog: ziirave_wdt: change name to be more specific
watchdog: orion: use 0 for unset heartbeat
watchdog: npcm: remove whitespaces
watchdog: reset last_hw_keepalive time at start
watchdog: imx2_wdt: Drop .remove callback
watchdog: Add stop_on_reboot parameter to control reboot policy
watchdog: wm831x_wdt: Remove GPIO handling
watchdog: imx7ulp: Remove unused include of init.h
watchdog: imx_sc_wdt: Remove unused includes
watchdog: qcom: Use irq flags from firmware
watchdog: pm8916_wdt: Add system sleep callbacks
watchdog: qcom-wdt: disable pretimeout on timer platform -
…ernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
cros-usbpd-notify and cros_ec_typec:
- Add a new notification driver that handles and dispatches USB PD
related events to other drivers.
- Add a Type C connector class driver for cros_ecCrOS EC:
- Introduce a new cros_ec_cmd_xfer_status helperSensors/iio:
- A series from Gwendal that adds Cros EC sensor hub FIFO supportWilco EC:
- Fix a build warning.
- Platform data shouldn't include kernel.hMisc:
- i2c api conversion complete, with i2c_new_client_device instead of
i2c_new_device in chromeos_laptop.
- Replace zero-length array with flexible-array member in
cros_ec_chardev and wilco_ec
- Update new structure for SPI transfer delays in cros_ec_spi* tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
platform/chrome: cros_ec_spi: Wait for USECS, not NSECS
iio: cros_ec: Use Hertz as unit for sampling frequency
iio: cros_ec: Report hwfifo_watermark_max
iio: cros_ec: Expose hwfifo_timeout
iio: cros_ec: Remove pm function
iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
iio: expose iio_device_set_clock
iio: cros_ec: Move function description to .c file
platform/chrome: cros_ec_sensorhub: Add median filter
platform/chrome: cros_ec_sensorhub: Add code to spread timestmap
platform/chrome: cros_ec_sensorhub: Add FIFO support
platform/chrome: cros_ec_sensorhub: Add the number of sensors in sensorhub
platform/chrome: chromeos_laptop: make I2C API conversion complete
platform/chrome: wilco_ec: event: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_chardev: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_typec: Update port info from EC
platform/chrome: Add Type C connector class driver
platform/chrome: cros_usbpd_notify: Pull PD_HOST_EVENT status
platform/chrome: cros_usbpd_notify: Amend ACPI driver to plat
platform/chrome: cros_usbpd_notify: Add driver data struct
... -
Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
add cross arch compatibility to the devm_memremap_pages() interface,
enhance numa information for persistent memory ranges, and add a
zero_page_range() dax operation.This cycle I switched from the patchwork api to Konstantin's b4 script
for collecting tags (from x86, PowerPC, filesystem, and device-mapper
folks), and everything looks to have gone ok there. This has all
appeared in -next with no reported issues.Summary:
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach
in the platform-memory subsystem before the platform will consider
them power-fail protected.- Promote numa_map_to_online_node() to a cross-kernel generic
facility.- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit
test compilation fixups.- Fixup some flexible-array declarations"
* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
dax: Move mandatory ->zero_page_range() check in alloc_dax()
dax,iomap: Add helper dax_iomap_zero() to zero a range
dax: Use new dax zero page method for zeroing a page
dm,dax: Add dax zero_page_range operation
s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
dax, pmem: Add a dax operation zero_page_range
pmem: Add functions for reading/writing page to/from pmem
libnvdimm: Update persistence domain value for of_pmem and papr_scm device
tools/test/nvdimm: Fix out of tree build
libnvdimm/region: Fix build error
libnvdimm/region: Replace zero-length array with flexible-array member
libnvdimm/label: Replace zero-length array with flexible-array member
ACPI: NFIT: Replace zero-length array with flexible-array member
libnvdimm/region: Introduce an 'align' attribute
libnvdimm/region: Introduce NDD_LABELING
libnvdimm/namespace: Enforce memremap_compat_align()
libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
libnvdimm: Out of bounds read in __nd_ioctl()
acpi/nfit: improve bounds checking for 'func'
mm/memremap_pages: Introduce memremap_compat_align()
... -
Pull iommu updates from Joerg Roedel:
- ARM-SMMU support for the TLB range invalidation command in SMMUv3.2
- ARM-SMMU introduction of command batching helpers to batch up CD and
ATC invalidation- ARM-SMMU support for PCI PASID, along with necessary PCI symbol
exports- Introduce a generic (actually rename an existing) IOMMU related
pointer in struct device and reduce the IOMMU related pointers- Some fixes for the OMAP IOMMU driver to make it build on 64bit
architectures- Various smaller fixes and improvements
* tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
iommu: Move fwspec->iommu_priv to struct dev_iommu
iommu/virtio: Use accessor functions for iommu private data
iommu/qcom: Use accessor functions for iommu private data
iommu/mediatek: Use accessor functions for iommu private data
iommu/renesas: Use accessor functions for iommu private data
iommu/arm-smmu: Use accessor functions for iommu private data
iommu/arm-smmu: Refactor master_cfg/fwspec usage
iommu/arm-smmu-v3: Use accessor functions for iommu private data
iommu: Introduce accessors for iommu private data
iommu/arm-smmu: Fix uninitilized variable warning
iommu: Move iommu_fwspec to struct dev_iommu
iommu: Rename struct iommu_param to dev_iommu
iommu/tegra-gart: Remove direct access of dev->iommu_fwspec
drm/msm/mdp5: Remove direct access of dev->iommu_fwspec
ACPI/IORT: Remove direct access of dev->iommu_fwspec
iommu: Define dev_iommu_fwspec_get() for !CONFIG_IOMMU_API
iommu/virtio: Reject IOMMU page granule larger than PAGE_SIZE
iommu/virtio: Fix freeing of incomplete domains
iommu/virtio: Fix sparse warning
iommu/vt-d: Add build dependency on IOASID
... -
Pull more kvm updates from Paolo Bonzini:
"s390:
- nested virtualization fixesx86:
- split svm.c- miscellaneous fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: fix crash cleanup when KVM wasn't used
KVM: X86: Filter out the broadcast dest for IPI fastpath
KVM: s390: vsie: Fix possible race when shadowing region 3 tables
KVM: s390: vsie: Fix delivery of addressing exceptions
KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks
KVM: nVMX: don't clear mtf_pending when nested events are blocked
KVM: VMX: Remove unnecessary exception trampoline in vmx_vmenter
KVM: SVM: Split svm_vcpu_run inline assembly to separate file
KVM: SVM: Move SEV code to separate file
KVM: SVM: Move AVIC code to separate file
KVM: SVM: Move Nested SVM Implementation to nested.c
kVM SVM: Move SVM related files to own sub-directory -
Pull virtio updates from Michael Tsirkin:
- Some bug fixes
- The new vdpa subsystem with two first drivers
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
vdpa: move to drivers/vdpa
virtio: Intel IFC VF driver for VDPA
vdpasim: vDPA device simulator
vhost: introduce vDPA-based backend
virtio: introduce a vDPA based transport
vDPA: introduce vDPA bus
vringh: IOTLB support
vhost: factor out IOTLB
vhost: allow per device message handler
vhost: refine vhost and vringh kconfig
virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
virtio-net: Introduce hash report feature
virtio-net: Introduce RSS receive steering feature
virtio-net: Introduce extended RSC feature
tools/virtio: option to build an out of tree module -
For thumb instructions, call_undef_hook() in traps.c first reads a u16,
and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second
u16 is read, which then makes up the the lower half-word of a T32
instruction. For T16 instructions, the second u16 is not read,
which makes the resulting u32 opcode always have the upper half set to
0.However, having the upper half of instr_mask in the undef_hook set to 0
masks out the upper half of all thumb instructions - both T16 and T32.
This results in trapped T32 instructions with the lower half-word equal
to the T16 encoding of setend (b650) being matched, even though the upper
half-word is not 0000 and thus indicates a T32 opcode.An example of such a T32 instruction is eaa0b650, which should raise a
SIGILL since T32 instructions with an eaa prefix are unallocated as per
Arm ARM, but instead works as a SETEND because the second half-word is set
to b650.This patch fixes the issue by extending instr_mask to include the
upper u32 half, which will still match T16 instructions where the upper
half is 0, but not T32 instructions.Fixes: 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks")
Cc: # 4.0.x-
Reviewed-by: Suzuki K Poulose
Signed-off-by: Fredrik Strupe
Signed-off-by: Catalin Marinas -
__get_user_pages_locked() will return 0 instead of -EINTR after commit
4426e945df588 ("mm/gup: allow VM_FAULT_RETRY for multiple times") which
added extra code to allow gup detect fatal signal faster.Restore the original -EINTR behavior.
Cc: Andrew Morton
Cc: Thomas Gleixner
Cc: Peter Zijlstra
Fixes: 4426e945df58 ("mm/gup: allow VM_FAULT_RETRY for multiple times")
Reported-by: syzbot+3be1a33f04dc782e9fd5@syzkaller.appspotmail.com
Signed-off-by: Hillf Danton
Acked-by: Michal Hocko
Signed-off-by: Peter Xu
Signed-off-by: Linus Torvalds
08 Apr, 2020
5 commits
-
Regular files opened with O_NONBLOCK allow read to return after a single
round-trip with the server instead of trying to fill buffer.
Add a few lines in 9p documentation to describe that.Link: http://lkml.kernel.org/r/1586193572-1375-1-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet -
Pull drm fixes from Dave Airlie:
"This is a set of fixes that have queued up, I think I might have
another pull with some more before rc1 but I'd like to dequeue what I
have now just in case Easter is more eggciting that expected.The main thing in here is a fix for a longstanding nouveau power
management issues on certain laptops, it should help runtime
suspend/resume for a lot of people.There is also a reverted patch for some drm_mm behaviour in atomic
contexts.Summary:
core:
- revert drm_mm atomic patch
- dt binding fixesfbcon:
- null ptr error fixi915:
- GVT fixesnouveau:
- runpm fix
- svm fixesamdgpu:
- HDCP fixes
- gfx10 fix
- Misc display fixes
- BACO fixesamdkfd:
- Fix memory leakvboxvideo:
- remove conflicting fbsvc4:
- mode validation fixxen:
- fix PTR_ERR usage"* tag 'drm-next-2020-04-08' of git://anongit.freedesktop.org/drm/drm: (41 commits)
drm/nouveau/kms/nv50-: wait for FIFO space on PIO channels
drm/nouveau/nvif: protect waits against GPU falling off the bus
drm/nouveau/nvif: access PTIMER through usermode class, if available
drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init
drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges
drm/nouveau/svm: remove useless SVM range check
drm/nouveau/svm: check for SVM initialized before migrating
drm/nouveau/svm: fix vma range check for migration
drm/nouveau: remove checks for return value of debugfs functions
drm/nouveau/ttm: evict other IO mappings when running out of BAR1 space
drm/amdkfd: kfree the wrong pointer
drm/amd/display: increase HDCP authentication delay
drm/amd/display: Correctly cancel future watchdog and callback events
drm/amd/display: Don't try hdcp1.4 when content_type is set to type1
drm/amd/powerplay: move the ASIC specific nbio operation out of smu_v11_0.c
drm/amd/powerplay: drop redundant BIF doorbell interrupt operations
drm/amd/display: Fix dcn21 num_states
drm/amd/display: Enable BT2020 in COLOR_ENCODING property
drm/amd/display: LFC not working on 2.0x range monitors (v2)
drm/amd/display: Support plane level CTM
... -
Pull input updates from Dmitry Torokhov:
"An update to the Goodix touchscreen driver to enable it work properly
on various Bay Trail and Cherry Trail devices, and a few other
assorted changes"* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
Input: update SPDX tag for input-event-codes.h
Input: i8042 - add Acer Aspire 5738z to nomux list
Input: goodix - fix compilation when ACPI support is disabled
dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema
Input: of_touchscreen - explicitly choose axis
Input: goodix - support gt9147 touchpanel
dt-bindings: touchscreen: goodix: support of gt9147
Input: goodix - add support for Goodix GT917S
Input: goodix - use string-based chip ID
dt-bindings: input: touchscreen: add compatible string for Goodix GT917S
Input: goodix - add support for more then one touch-key
Input: goodix - fix spurious key release events
Input: goodix - try to reset the controller if the i2c-test fails
Input: goodix - restore config on resume if necessary
Input: goodix - make goodix_send_cfg() take a raw buffer as argument
Input: goodix - add minimum firmware size check
Input: goodix - save a copy of the config from goodix_read_config()
Input: goodix - move defines to above struct goodix_ts_data declaration
Input: goodix - add support for controlling the IRQ pin through ACPI methods
Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices
... -
Pull thermal updates from Daniel Lezcano:
- Convert tsens configuration DT binding to yaml (Rajeshwari)
- Add interrupt support on the rcar sensor (Niklas Söderlund)
- Add a new Spreadtrum thermal driver (Baolin Wang)
- Add thermal binding for the fsl scu board, a new API to retrieve the
sensor id bound to the thermal zone and i.MX system controller sensor
(Anson Huang))- Remove warning log when a deferred probe is requested on Exynos
(Marek Szyprowski)- Add the thermal monitoring unit support for imx8mm with its DT
bindings (Anson Huang)- Rephrase the Kconfig text for clarity (Linus Walleij)
- Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)
- Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
dependency, add the __may_be unused annotation for PM functions and
the COMPILE_TEST option for imx8mm (Anson Huang)- Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)
- Add DT binding and support for the rcar gen3 r8a77961 and improve the
error path on the rcar init function (Niklas Söderlund)- Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)
- Improve code by removing lock and caching values in the rcar thermal
sensor (Niklas Söderlund)- Cleanup in the qoriq drivers and add a call to
imx_thermal_unregister_legacy_cooling in the removal function (Anson
Huang)- Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob
Herring)- Change the thermal DT bindings by making the cooling-maps optional
(Yuantian Tang)- Add Tiger Lake support (Sumeet Pawnikar)
- Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)
- Make pkg_temp_lock a raw_spinlock_t(Clark Williams)
- Fix incorrect data types by changing them to signed on i.MX SC (Anson
Huang)- Replace zero-length array with flexible-array member (Gustavo A. R.
Silva)- Add support for i.MX8MP in the driver and in the DT bindings (Anson
Huang)- Fix return value of the cpufreq_set_cur_state() function (Willy
Wolff)- Remove abusing and scary WARN_ON in the cpufreq cooling device
(Daniel Lezcano)- Fix build warning of incorrect argument type reported by sparse on
imx8mm (Anson Huang)- Fix stub for the devfreq cooling device (Martin Blumenstingl)
- Fix cpu idle cooling documentation (Sergey Vidishev)
* tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits)
Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle
thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
thermal: imx8mm: Fix build warning of incorrect argument type
thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON
thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state
thermal: imx8mm: Add i.MX8MP support
dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP
thermal: qcom: tsens.h: Replace zero-length array with flexible-array member
thermal: imx_sc_thermal: Fix incorrect data type
thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow
thermal: int340x: processor_thermal: Add Tiger Lake support
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
dt-bindings: thermal: make cooling-maps property optional
dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems'
dt-bindings: thermal: sprd: Remove redundant 'maxItems'
thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove
thermal: qoriq: Sort includes alphabetically
thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups
thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp()
thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv
... -
Pull mfd updates from Lee Jones:
"New Drivers:
- Add support for IQS620A/621/622/624/625 Azoteq IQS62X SensorsNew Device Support:
- Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC
- Add support for Comet Lake to Intel LPSSNew Functionality:
- Add support for Charger Detection to Spreadtrum SC27xx PMICs
- Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC
- Add ACPI enumeration support to Diolan DLN2 USB AdaptorFix-ups:
- Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847
- I2C registration; rn5t618
- Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1
- Use flexible-array members; omap-usb-tll, qcom-pm8xxx
- Remove unnecessary casts; omap-usb-host, omap-usb-tll
- Power (suspend/resume/poweroff) enhancements; rk808
- Improve error/sanity checking; dln2
- Use snprintf(); aat2870-coreBug Fixes:
- Fix PCI IDs in intel-lpss-pci"* tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits)
mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock
mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow
mfd: dln2: Allow to be enumerated via ACPI
mfd: da9062: Add support for interrupt polarity defined in device tree
dt-bindings: bd718x7: Yamlify and add BD71850
mfd: dln2: Fix sanity checking for endpoints
mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs
mfd: sc27xx: Add USB charger type detection support
dt-bindings: mfd: Document STM32 low power timer bindings
mfd: rk808: Convert RK805 to shutdown/suspend hooks
mfd: rk808: Reduce shutdown duplication
mfd: rk808: Stop using syscore ops
mfd: rk808: Ensure suspend/resume hooks always work
mfd: rk808: Always use poweroff when requested
mfd: omap: Remove useless cast for driver.name
mfd: Kconfig: Fix some misspelling of the word functionality
mfd: pm8xxx: Replace zero-length array with flexible-array member
mfd: omap-usb-tll: Replace zero-length array with flexible-array member
mfd: cpcap: Fix compile if MFD_CORE is not selected
mfd: cros_ec: Check DT node for usbpd-notify add
...
