04 Oct, 2016
2 commits
-
The MSM8660, APQ8060, IPQ806x and MSM8960 have a GCC clock
to the message RAM used by the RPM. This needs to be enabled
for messages to pass through. This is a crude solution that
simply prepare/enable at probe() and disable/unprepare
at remove(). More elaborate PM is probably possible to
add later.The construction uses IS_ERR() to gracefully handle the
platforms that do not provide a message RAM clock. It will
bail out of probe only if the clock is hitting a probe
deferral situation.Of course this requires the proper device tree set-up:
rpm: rpm@104000 {
compatible = "qcom,rpm-msm8660";
clocks = ;
clock-names = "ram";
...
};I have provided this in the MSM8660 device tree, and will
provide patches for the other targets.Cc: Björn Andersson
Signed-off-by: Linus Walleij
Signed-off-by: Lee Jones -
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.Signed-off-by: Peter Chen
Reviewed-by: Bjorn Andersson
Signed-off-by: Lee Jones
31 Aug, 2016
1 commit
-
In order to support the Qualcomm MDM9615 SoC, add support for the
RPM regulator entries in the qcom-rpm driver.Signed-off-by: Neil Armstrong
Acked-by: Bjorn Andersson
Signed-off-by: Lee Jones
29 Jun, 2016
3 commits
-
The RPM has two sets of selectors (IPC bit fields): request and
acknowledge. Apparently, some models use 4*32 bit words for select
and some use 7*32 bit words for request, but all use 7*32 words
for acknowledge bits.So apparently you can on the models with requests of 4*32 select
bits send 4*32 messages and get 7*32 different replies, so on ACK
interrupt, 7*32 bit words need to be read. This is how the vendor
code apparently works.Cc: stable@vger.kernel.org
Reported-by: Stephen Boyd
Signed-off-by: Linus Walleij
Reviewed-by: Bjorn Andersson
Signed-off-by: Lee Jones -
This define RPM_SIGNAL probably pertains to the IPC signal which
we ended up fetching from the device tree instead. the define is
unused, remove it.Signed-off-by: Linus Walleij
Reviewed-by: Stephen Boyd
Signed-off-by: Lee Jones -
The RPM in MSM8660/APQ8060 has different offsets to the selector
ACK and request context ACK registers. Make all these register
offsets part of the per-SoC data and assign the right values.The bug was found by verifying backwards to the vendor tree in
the out-of-tree files : all were using
offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060
which was using offsets 3,11,19,27 and a select size of 7.All other platforms apart from msm8660 were affected by reading
excess registers, since 7 was hardcoded as the number of select
words, this patch makes also this part dynamic so we only write/read
as many select words as the platform actually use.Symptoms of this bug when using msm8660: the first RPM transaction
would work, but the next would stall or raise an error since the
previous transaction was not properly ACKed as the ACK words were
read at the wrong offset.Cc: stable@vger.kernel.org
Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM")
Signed-off-by: Linus Walleij
Reviewed-by: Björn Andersson
Signed-off-by: Lee Jones
04 Dec, 2015
1 commit
-
of_match_device could return NULL, and so cause a NULL pointer
dereference later.Signed-off-by: LABBE Corentin
Signed-off-by: Lee Jones
31 Oct, 2015
1 commit
-
The driver handles wakeup irq correctly using irq_set_irq_wake. There's
no need to use IRQF_NO_SUSPEND while registering the interrupt.This patch removes the use of IRQF_NO_SUSPEND flag.
Signed-off-by: Sudeep Holla
Signed-off-by: Lee Jones
11 Aug, 2015
1 commit
-
Qualcomm Debug Subsystem clock is used by CoreSight components.
Add required definitions for it. qcom_rpm_resource::status_id is
not used by driver, so just mark it as ~0.Signed-off-by: Ivan T. Ivanov
Signed-off-by: Lee Jones
30 Mar, 2015
1 commit
-
The IPQ8064 also includes an RPM following the same message structure as
other chips. In addition, it supports a few new resource types to
support the NSS fabric clocks and the SMB208/SMB209 regulators found on
the reference boards.Signed-off-by: Josh Cartwright
Signed-off-by: Stephen Boyd
Signed-off-by: Lee Jones
23 Jan, 2015
1 commit
-
Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
and 8064 based devices. The driver exposes resources that child drivers
can operate on; to implementing regulator, clock and bus frequency
drivers.Signed-off-by: Bjorn Andersson
Signed-off-by: Lee Jones
