23 Dec, 2011
1 commit
-
Signed-off-by: David S. Miller
Signed-off-by: Jeff Garzik
17 Nov, 2011
2 commits
-
fix these errors:
drivers/ata/libata-sff.c:2538:3: error: implicit declaration of function
'ata_pci_bmdma_prepare_host'
drivers/ata/libata-sff.c:2549:40: error: 'ata_bmdma_interrupt'
undeclared (first use in this function)Signed-off-by: Alexander Beregalov
Signed-off-by: Jeff Garzik -
The change in commit 904c04feaf13ed "ahci_platform: Add the board_ids..."
doesn't work for the DT probing case as platform_get_device_id returns
NULL. Pick the default ahci_port_info in this case.Signed-off-by: Rob Herring
Acked-by: Anton Vorontsov
Cc: Richard Zhu
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jeff Garzik
11 Nov, 2011
1 commit
-
Drivers should not use NO_IRQ; moreover, some architectures don't
have it nowadays. '0' is the 'no irq' case.Signed-off-by: Anton Vorontsov
Acked-by: Alan Cox
Signed-off-by: Jeff Garzik
09 Nov, 2011
5 commits
-
Signed-off-by: Keng-Yu Lin
Signed-off-by: Jeff Garzik -
Reenable sending SRST to devices connected behind a Sil3726 PMP.
This allow staggered spinups and handles drives that spins up slowly.While the drives spin up, the PMP will not accept SRST.
Most controller reissues the reset until the drive is ready, while
some [Sil3124] returns an error.
In ata_eh_error, wait 10s before reset the ATA port and try again.Signed-off-by: Gwendal Grignou
Acked-by: Tejun Heo
Signed-off-by: Jeff Garzik -
Trivial spelling fix.
Signed-off-by: Chris Dunlop
Signed-off-by: Jeff Garzik -
Use dev_get_platdata() to retrieve the struct ahci_platform_data data
from the platform.Signed-off-by: JiSheng Zhang
Signed-off-by: Jeff Garzik -
Add the documentation of parameters of ata_change_queue_depth to silence the warning of make xmldocs
Signed-off-by: Marcos paulo de Souza
Acked-by: Randy Dunlap
Signed-off-by: Jeff Garzik
07 Nov, 2011
1 commit
-
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
Revert "tracing: Include module.h in define_trace.h"
irq: don't put module.h into irq.h for tracking irqgen modules.
bluetooth: macroize two small inlines to avoid module.h
ip_vs.h: fix implicit use of module_get/module_put from module.h
nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
include: replace linux/module.h with "struct module" wherever possible
include: convert various register fcns to macros to avoid include chaining
crypto.h: remove unused crypto_tfm_alg_modname() inline
uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
pm_runtime.h: explicitly requires notifier.h
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
miscdevice.h: fix up implicit use of lists and types
stop_machine.h: fix implicit use of smp.h for smp_processor_id
of: fix implicit use of errno.h in include/linux/of.h
of_platform.h: delete needless include
acpi: remove module.h include from platform/aclinux.h
miscdevice.h: delete unnecessary inclusion of module.h
device_cgroup.h: delete needless include
net: sch_generic remove redundant use of
net: inet_timewait_sock doesnt need
...Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
- drivers/media/dvb/frontends/dibx000_common.c
- drivers/media/video/{mt9m111.c,ov6650.c}
- drivers/mfd/ab3550-core.c
- include/linux/dmaengine.h
04 Nov, 2011
1 commit
-
Add devicetree match table to ahci platform driver for Calxeda Highbank
AHCI controller.Signed-off-by: Rob Herring
Acked-by: Grant Likely
Cc: Jeff Garzik
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
01 Nov, 2011
2 commits
-
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore. Make sure the modular drivers in the ide dir
are actually calling out for explicitly in advance.Signed-off-by: Paul Gortmaker
-
They were getting this implicitly by an include of module.h
from device.h -- but we are going to clean that up and break
that include chain, so include export.h explicitly now.Signed-off-by: Paul Gortmaker
29 Oct, 2011
1 commit
-
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits)
[SCSI] qla4xxx: export address/port of connection (fix udev disk names)
[SCSI] ipr: Fix BUG on adapter dump timeout
[SCSI] megaraid_sas: Fix instance access in megasas_reset_timer
[SCSI] hpsa: change confusing message to be more clear
[SCSI] iscsi class: fix vlan configuration
[SCSI] qla4xxx: fix data alignment and use nl helpers
[SCSI] iscsi class: fix link local mispelling
[SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA
[SCSI] aacraid: use lower snprintf() limit
[SCSI] lpfc 8.3.27: Change driver version to 8.3.27
[SCSI] lpfc 8.3.27: T10 additions for SLI4
[SCSI] lpfc 8.3.27: Fix queue allocation failure recovery
[SCSI] lpfc 8.3.27: Change algorithm for getting physical port name
[SCSI] lpfc 8.3.27: Changed worst case mailbox timeout
[SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes
[SCSI] megaraid_sas: Changelog and version update
[SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic
[SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support
[SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers
[SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts
...
27 Oct, 2011
1 commit
-
* 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits)
ARM: 7135/1: ep93xx: bring back missing
ARM: 7104/1: plat-pxa: break out GPIO driver specifics
ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem
ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics
ARM: 7101/1: arm/tegra: Replace with
ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h
ARM: 7083/1: rewrite U300 GPIO to use gpiolib
ARM: 7074/1: gpio: davinci: eliminate unused variable warnings
ARM: 7063/1: Orion: gpio: add missing include of linux/types.h
ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build
ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio
ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq
ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio
ARM: 7057/1: mach-pnx4008: rename GPIO header
ARM: 7056/1: plat-nomadik: kill off
ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function
ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem
ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics
ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem
ARM: 7043/1: mach-ixp2000: rename GPIO header
...Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
15 Oct, 2011
25 commits
-
Rename 'idetm_port' and 'idetm_data' variables to 'master_port'
and 'master_data' respectively to match register naming used in
efar_set_dmamode() and in ata_piix.c.Fix efar_set_piomode() documentation while at it.
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Besides making things noticably simpler it results in ~2% decrease in
the driver LOC count and also ~2% decrease in the driver binary size
(as measured on x86-32).Fix piix_set_piomode() documentation while at it.
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Set SITRE (separate slave timing register) bit also in master-only
configurations to match other PIIX-alike drivers and make further
changes easier.Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Always use ata_sff_data_xfer32() in ata_sff_data_xfer_noirq()
so the latter can be also used for host controllers supporting
32-bit PIO operations.It is a completely safe thing to do because if 32-bit PIO is
not supported or enabled ata_sff_data_xfer32() will fallback
to a standard method.Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Fixes IDE -> libata regression.
There shouldn't be any problems with it as corresponding IDE's host
driver (aec62xx) has been supporting PCI Power Management since
Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)")
and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management").Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Fixes IDE -> libata regression.
There shouldn't be any problems with it as corresponding IDE's host
driver (sl82c105) has been supporting PCI Power Management since
Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)")
and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management").Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Fixes IDE -> libata regression.
There shouldn't be any problems with it as corresponding IDE's host
driver (pdc202xx_new) has been supporting PCI Power Management since
Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)")
and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management").Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Acked-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Add controller type field to struct legacy_data and then use it
to merge together all ->set_piomode methods for QDI controllers.Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
QDI65x0 controllers are fully supported by pata_legacy driver
so remove no longer needed pata_qdi driver.Leave PATA_QDI config option for compatibility reasons and teach
pata_legacy to preserve the old behavior of pata_qdi driver.Acked-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Rename 'idetm_port' and 'idetm_data' variables to 'master_port'
and 'master_data' respectively to match register naming used in
it8213_set_dmamode() and in ata_piix.c.Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Fixes IDE -> libata regression.
IDE's it8213 host driver has been supporting those modes
(per official documentation) since the initial driver's merge
on Feb 7 2007 (commit 9c6712c0 "ide: add it8213 IDE driver").Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
This is similar change as commit 60c3be3 ("ata_piix: parallel scanning
on PATA needs an extra locking") for ata_piix host driver.Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
* Fix via_init_one() to enable clock on 66 MHz devices
(bug introduced in commit 460f531 "pata_via: store UDMA masks
in via_isa_bridges table").* Factor out common code from via_[re]init_one() to via_fixup().
Acked-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
XFER_SW_DMA_0 mode should be excluded from the extended cycle timing
computations.Acked-by: Alan Cox
Noticed-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Use standard ata_cable_80wire() method for the cable detection,
as a bonus this allows us to use the default ->prereset method.Acked-by: Kou Ishizaki
Acked-by: Akira Iguchi
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
The suspend()/resume() methods already get the right 'struct device' to get the
driver data from -- there's no need to get to the 'struct platform_device' that
contains that 'struct device' just to call dev_get_drvdata()...Acked-by: Viresh Kumar
Signed-off-by: Sergei Shtylyov
Signed-off-by: Jeff Garzik -
Fixes PCI access before PCI resources are allocated.
Acked-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Factor out common code from serverworks_[re]init_one() to
serverworks_fixup().Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Merge identical cable routines for Dell and Sun systems into
common oem_cable() one.Acked-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Acked-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Cosmetic fix but thanks to it pata_ali's DMI table now matches
alim15x3's one.Acked-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik -
Core libata code takes care of it nowadays.
Acked-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik
