17 Dec, 2018
3 commits
-
There are spelling mistakes in a couple of dev_dbg messages, fix these.
Signed-off-by: Colin Ian King
Reviewed-by: Oleksij Rempel
Signed-off-by: Ulf Hansson -
Although rtsx_usb doesn't support card removal detection, card insertion
will resume rtsx_usb by USB remote wakeup signaling.When rtsx_usb gets resumed, also resumes its child devices,
rtsx_usb_sdmmc and rtsx_usb_ms, to notify them there's a card in its
slot.Signed-off-by: Kai-Heng Feng
Tested-by: Oleksandr Natalenko
Signed-off-by: Ulf Hansson -
This driver provides support for Alcor Micro AU6601 and AU6621
card readers.This is single LUN HW and it is expected to work with following standards:
- Support SDR104 / SDR50
- MultiMedia Card (MMC)
- Memory Stick (MS)
- Memory Stick PRO (MS_Pro)Since it is a PCIe controller, it should work on any architecture
supporting PCIe. For now, it was developed and tested only on x86_64.This driver is a result of RE work and was created without any
documentation or real knowledge of HW internals.Signed-off-by: Oleksij Rempel
Signed-off-by: Ulf Hansson
03 Jul, 2018
1 commit
-
Several helper functions are local to the source and do not
need to be in global scope, so make them static.Cleans up sparse warnings:
symbol 'rtsx_pm_power_saving' was not declared. Should it be static?
symbol 'rtsx_set_l1off_sub_cfg_d0' was not declared. Should it be static?
symbol 'rtsx_pm_full_on' was not declared. Should it be static?
symbol 'rtsx_comm_set_ltr_latency' was not declared. Should it be static?
symbol 'rtsx_pci_process_ocp' was not declared. Should it be static?
symbol 'rtsx_pci_process_ocp_interrupt' was not declared. Should it be
static?Signed-off-by: Colin Ian King
Signed-off-by: Greg Kroah-Hartman
06 Apr, 2018
1 commit
-
Pull block layer updates from Jens Axboe:
"It's a pretty quiet round this time, which is nice. This contains:- series from Bart, cleaning up the way we set/test/clear atomic
queue flags.- series from Bart, fixing races between gendisk and queue
registration and removal.- set of bcache fixes and improvements from various folks, by way of
Michael Lyle.- set of lightnvm updates from Matias, most of it being the 1.2 to
2.0 transition.- removal of unused DIO flags from Nikolay.
- blk-mq/sbitmap memory ordering fixes from Omar.
- divide-by-zero fix for BFQ from Paolo.
- minor documentation patches from Randy.
- timeout fix from Tejun.
- Alpha "can't write a char atomically" fix from Mikulas.
- set of NVMe fixes by way of Keith.
- bsg and bsg-lib improvements from Christoph.
- a few sed-opal fixes from Jonas.
- cdrom check-disk-change deadlock fix from Maurizio.
- various little fixes, comment fixes, etc from various folks"
* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
blk-mq: Directly schedule q->timeout_work when aborting a request
blktrace: fix comment in blktrace_api.h
lightnvm: remove function name in strings
lightnvm: pblk: remove some unnecessary NULL checks
lightnvm: pblk: don't recover unwritten lines
lightnvm: pblk: implement 2.0 support
lightnvm: pblk: implement get log report chunk
lightnvm: pblk: rename ppaf* to addrf*
lightnvm: pblk: check for supported version
lightnvm: implement get log report chunk helpers
lightnvm: make address conversions depend on generic device
lightnvm: add support for 2.0 address format
lightnvm: normalize geometry nomenclature
lightnvm: complete geo structure with maxoc*
lightnvm: add shorten OCSSD version in geo
lightnvm: add minor version to generic geometry
lightnvm: simplify geometry structure
lightnvm: pblk: refactor init/exit sequences
lightnvm: Avoid validation of default op value
lightnvm: centralize permission check for lightnvm ioctl
...
16 Mar, 2018
1 commit
-
The functions rts5260_get_ocpstat, rts5260_get_ocpstat2,
rts5260_clear_ocpstat, rts5260_process_ocp, rts5260_init_hw and
rts5260_set_aspm are local to the source and do not need to be
in global scope, so make them static.Cleans up sparse warnings:
symbol 'rts5260_get_ocpstat' was not declared. Should it be static?
symbol 'rts5260_get_ocpstat2' was not declared. Should it be static?
symbol 'rts5260_clear_ocpstat' was not declared. Should it be static?
symbol 'rts5260_process_ocp' was not declared. Should it be static?
symbol 'rts5260_init_hw' was not declared. Should it be static?
symbol 'rts5260_set_aspm' was not declared. Should it be static?Signed-off-by: Colin Ian King
Signed-off-by: Greg Kroah-Hartman
01 Mar, 2018
1 commit
-
A change to the generic scatterlist code caused a conflict with
the rtsx card reader driver:In file included from drivers/misc/cardreader/rtsx_pcr.c:32:
include/linux/rtsx_pci.h:40: error: "SG_END" redefined [-Werror]This changes one instance of the driver to prefix SG_END and
related constants.Fixes: 723fbf563a6a ("lib/scatterlist: Add SG_CHAIN and SG_END macros for LSB encodings")
Cc: Anshuman Khandual
Signed-off-by: Arnd Bergmann
Signed-off-by: Jens Axboe
30 Jan, 2018
1 commit
-
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for RAVE Supervisory ProcessorMoved drivers:
- Move Realtek Card Reader Driver to MiscNew Device Support:
- Add support for Pinctrl to axp20xNew Functionality:
- Add resume support to atmel-flexcomFix-ups:
- Split MFD (mfd) and userspace handlers (platform) in cros_ec
- Fix trivial (whitespace, spelling) issue(s) in pcf50633-core
- Clean-up error handling in ab8500-debugfs
- General tidying up in tmio_core
- Kconfig fix-ups for qcom-pm8xxx
- Licensing changes (SPDX) to stm32-lptimer, stm32-timers
- Device Tree fixups in mc13xxx
- Simplify/remove unused code in cros_ec_spi, axp20x, ti_am335x_tscadc,
kempld-core, intel_soc_pmic_core.c, ab8500-debugfs"* tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo Lake
mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatile
mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macro
atmel_flexcom: Support resuming after a chip reset
mfd: Remove duplicate includes
dt-bindings: mfd: mc13xxx: Add the unit address to sysled
mfd: stm32: Adopt SPDX identifier
mfd: axp20x: Add pinctrl cell for AXP813
mfd: pm8xxx: Make elegible for COMPILE_TEST
mfd: kempld-core: Use resource_size function on resource object
mfd: tmio: Move register macros to tmio_core.c
mfd: cros ec: spi: Simplify delay handling between SPI messages
mfd: palmas: Assign the right powerhold mask for tps65917
mfd: ab8500-debugfs: Use common error handling code in ab8500_print_modem_registers()
mfd: ti_am335x_tscadc: Remove redundant assignment to node
mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed'
dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver
watchdog: Add RAVE SP watchdog driver
mfd: Add driver for RAVE Supervisory Processor
serdev: Introduce devm_serdev_device_open()
...
04 Dec, 2017
1 commit
-
drivers/staging/rts5208/sd.o: In function `.sd_power_off_card3v3':
(.text+0x5760): multiple definition of `.sd_power_off_card3v3'
drivers/misc/cardreader/rtsx_pcr.o:(.text+0x4630): first defined here
drivers/staging/rts5208/sd.o:(.opd+0x378): multiple definition of `sd_power_off_card3v3'
drivers/misc/cardreader/rtsx_pcr.o:(.opd+0x4f8): first defined here
drivers/staging/rts5208/ms.o: In function `.ms_power_off_card3v3':
(.text+0x5e70): multiple definition of `.ms_power_off_card3v3'
drivers/misc/cardreader/rtsx_pcr.o:(.text+0x46e0): first defined here
drivers/staging/rts5208/ms.o:(.opd+0x360): multiple definition of `ms_power_off_card3v3'
drivers/misc/cardreader/rtsx_pcr.o:(.opd+0x510): first defined hereFixes: 5da4e04ae480 ("misc: rtsx: Add support for RTS5260")
Signed-off-by: Stephen Rothwell
Signed-off-by: Lee Jones
29 Nov, 2017
2 commits
-
Add support for new chip rts5260.
In order to support rts5260, the definitions of
some internal registers and workflow have to be
modified and are different from its predecessors
and OCP function is added for RTS5260. So we need
this patch to ensure RTS5260 can work.Signed-off-by: Rui Feng
Reviewed-by: Daniel Bristot de Oliveira
Tested-by: Perry Yuan
Signed-off-by: Lee Jones -
Because Realtek card reader drivers are pcie and usb drivers,
and they bridge mmc subsystem and memstick subsystem, they are
not mfd drivers. Greg and Lee Jones had a discussion about
where to put the drivers, the result is that misc is a good
place for them, so I move all files to misc. If I don't move
them to a right place, I can't add any patch for this driver.Signed-off-by: Rui Feng
Reviewed-by: Daniel Bristot de Oliveira
Acked-by: Arnd Bergmann
Acked-by: Ulf Hansson
Acked-by: Greg Kroah-Hartman
Tested-by: Perry Yuan
Signed-off-by: Lee Jones
