20 Oct, 2010
23 commits
-
…nux-samsung into devel-stable
Conflicts:
arch/arm/mach-at91/include/mach/system.h
arch/arm/mach-imx/mach-cpuimx27.cAT91 conflict resolution:
Acked-by: Anders Larsen <al@alarsen.net>
IMX conflict resolution confirmed by Uwe Kleine-König. -
Pass the correct GPIO to gpio_free
Signed-off-by: Fabio Estevam
Acked-by: Eric Bénard
Signed-off-by: Sascha Hauer -
without this patch we get :
arch/arm/mach-imx/built-in.o: In function `eukrea_cpuimx27_init':
eukrea_mbimx27-baseboard.c:(.init.text+0x44c): undefined reference to `mxc_ulpi_access_ops'Signed-off-by: Eric Bénard
Signed-off-by: Uwe Kleine-König -
this patch fix the following errors :
arch/arm/mach-mx3/mach-pcm037_eet.c:62: error: implicit declaration of function 'MXC_SPI_CS'
arch/arm/mach-mx3/mach-pcm037_eet.c:185: error: implicit declaration of function 'imx35_add_spi_imx0'from the Kconfig pcm037 is i.MX31 based and not i.MX35 so replace
imx35_add_spi_imx0 by imx31_add_spi_imx0Signed-off-by: Eric Bénard
[ukl: remove unneeded #include ]
Signed-off-by: Uwe Kleine-König -
This is only a partial revert of "ARM: mx3/mx31ads: fold board
header in its only user"
[commit ccfa7c269843001077df02d98918c6c9bde91395)]As some of the the board defines are also used in the cs89x0
ethernet driver by the i.MX31 ADS.Signed-off-by: Ian Lartey
Signed-off-by: Sascha Hauer -
add NAND, SDHC
Signed-off-by: Eric Bénard
-
Signed-off-by: Eric Bénard
-
this patch really configure the GPIO in GPIO mode.
Signed-off-by: Eric Bénard
-
Tested on i.MX25 and i.MX35 and i.MX51
Signed-off-by: Eric Bénard
-
the attached patch allows SD to work on i.MX51 with Wolfram's drivers
Tested on i.MX51.Based on original patch from: Richard Zhu
Signed-off-by: Eric Bénard -
Based on original patch from: Richard Zhu
Signed-off-by: Eric Bénard -
Signed-off-by: Eric Bénard
-
Signed-off-by: Eric Bénard
-
Signed-off-by: Eric Bénard
-
the PHY is UTMI so don't create an ULPI viewpoint.
Signed-off-by: Eric Bénard
-
Without this exiting WFI can result in cache corruption.
Code taken from Freescale's 2.6.27 BSP and tested on i.MX35Signed-off-by: Eric Bénard
-
this patch fix the following errors :
arch/arm/plat-mxc/devices/platform-imx-dma.c:44:
error: ‘MX25_SDMA_BASE_ADDR’ undeclared here (not in a function)
arch/arm/plat-mxc/devices/platform-imx-dma.c:44:
error: ‘MX25_INT_SDMA’ undeclared here (not in a function)Signed-off-by: Eric Bénard
Acked-by: Uwe Kleine-König -
* get_rate_arm : when 400MHz clock is selected (cctl & 1<
-
During the reorganisation of the imx-i2c devices
(in 64de5ec168d9743903e6ec482c3e9f37af49f9c1) the 3rd imx-i2c device
for the mx35 got lost. This patch adds the missing device.Signed-off-by: Marc Kleine-Budde
Acked-by: Uwe Kleine-König
Signed-off-by: Sascha Hauer -
Add IRAM(Internal RAM) allocation functions using GENERIC_ALLOCATOR.
The allocation size is 4KB multiples to guarantee alignment. The
idea for these functions is for i.MX platforms to use them
to dynamically allocate IRAM usage.Applies on 2.6.36-rc7
Signed-off-by: Dinh Nguyen
Reviewed-by: Amit Kucheria
Acked-by: Uwe Kleine-König
Signed-off-by: Sascha Hauer
19 Oct, 2010
4 commits
-
This patch fixes build error about GPIO address due to
conflict of commit 4d914705 and 19a2c065.- commit 4d914705: Fix on GPIO base addresses
- commit 19a2c065: Moves initial map for merging S5P64X0Signed-off-by: Kukjin Kim
-
Conflicts:
arch/arm/kernel/head-common.S -
…x' and 'unwind' into devel
-
Update Kconfig text accordingly.
Signed-off-by: srinidhi kasagar
Acked-by: Linus Walleij
Signed-off-by: Russell King
18 Oct, 2010
13 commits
-
…-linux-2.6 into devel-stable
-
This patch adds header into the below files for build with
CONFIG_PREEMPT_NONE.arch/arm/mach-s5p64x0/cpu.c
Signed-off-by: Seung-Chull Suh
[kgene.kim@samsung.com: edited title and message]
Signed-off-by: Kukjin Kim -
The patch removes s3c_gpio_lock/unlock to avoid acquiring the lock
recursively as lock is already acquired by calling function.Signed-off-by: Atul Dahiya
Signed-off-by: Sangbeom Kim
[kgene.kim@samsung.com: removed useless variable due to this]
Signed-off-by: Kukjin Kim -
The s5p64x0_sysclass should be used in place of the obselete s5p6440_sysclass.
Signed-off-by: Abhilash Kesavan
Signed-off-by: Sangbeom Kim
Signed-off-by: Kukjin Kim -
Fix the touch screen device name from s3c64x0-adc to s3c64xx-adc.
Signed-off-by: Naveen Krishna Ch
Signed-off-by: Kukjin Kim -
This patch updates s5p64x0_defconfig and changes the name from
s5p6440_defconfig so that can support S5P6440 and S5P6450 with
one kernel.Tested on SMDK6440(S5P6440) and SMDK6450(S5P6450).
Signed-off-by: Kukjin Kim
-
This patch adds UART serial port support for S5P6450 SoC.
The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5.
And to fix membase which is in serial/samsung.c is from Ben Dooks.Signed-off-by: Kukjin Kim
Cc: Ben Dooks -
This patch moves smdk6440 board file from mach-s5p6440 into the new
mach-s5p64x0 directory and adds smdk6450 board file.Signed-off-by: Kukjin Kim
-
This patch moves S5P6440 GPIO support files from mach-s5p6440
into the new mach-s5p64x0 for merge S5P6440 and S5P6450 SocS.
NOTE: Not supported S5P6450 GPIO yet. Will be supported soon.Signed-off-by: Kukjin Kim
-
This patch adds S5P6450 I2C support in the ARCH_S5P64X0. And
moves S5P6440 I2C support files into the mach-s5p64x0 together.Signed-off-by: Kukjin Kim
-
This patch moves DMA support files in the mach-s5p64x0
for S5P6440 and S5P6450 SoCs.Signed-off-by: Kukjin Kim
Cc: Jassi Brar -
This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs.
Signed-off-by: Kukjin Kim
Cc: Jassi Brar -
This patch updates timer support for S5P6440 and S5P6450 SoCs.
Signed-off-by: Kukjin Kim