27 Sep, 2010
1 commit
-
Change "return (EXPR);" to "return EXPR;"
return is not a function, parentheses are not required.
Signed-off-by: Eric Dumazet
Signed-off-by: David S. Miller
04 Apr, 2010
1 commit
-
Converts the list and the core manipulating with it to be the same as uc_list.
+uses two functions for adding/removing mc address (normal and "global"
variant) instead of a function parameter.
+removes dev_mcast.c completely.
+exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for
manipulation with lists on a sandbox (used in bonding and 80211 drivers)Signed-off-by: Jiri Pirko
Signed-off-by: David S. Miller
18 Feb, 2010
1 commit
-
Signed-off-by: Jiri Pirko
Signed-off-by: David S. Miller
13 Feb, 2010
1 commit
-
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss
anything). Used spatch and did small tweaks and conding style changes when
it was suitable.Jirka
Signed-off-by: Jiri Pirko
Signed-off-by: David S. Miller
08 Jan, 2010
2 commits
-
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section
in every case.Signed-off-by: Alexey Dobriyan
Signed-off-by: David S. Miller -
Use the %pMF kernel extension to display the MAC address.
The address will still be displayed in the FDDI Canonical format.
Signed-off-by: H Hartley Sweeten
Cc: Maciej W. Rozycki
Cc: David S. Miller
Signed-off-by: David S. Miller
01 Sep, 2009
1 commit
-
In a couple of cases collapse some extra code like:
int retval = NETDEV_TX_OK;
...
return retval;
into
return NETDEV_TX_OK;Signed-off-by: Stephen Hemminger
Signed-off-by: David S. Miller
06 Jul, 2009
1 commit
-
This patch converts the remaining occurences of raw return values to their
symbolic counterparts in ndo_start_xmit() functions that were missed by the
previous automatic conversion.Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero
is changed to explicitly use NETDEV_TX_OK.Signed-off-by: Patrick McHardy
Signed-off-by: David S. Miller
13 Jun, 2009
1 commit
-
Convert magic values 1 and -1 to NETDEV_TX_BUSY and NETDEV_TX_LOCKED respectively.
0 (NETDEV_TX_OK) is not changed to keep the noise down, except in very few cases
where its in direct proximity to one of the other values.Signed-off-by: Patrick McHardy
Signed-off-by: David S. Miller
10 Feb, 2009
1 commit
-
Signed-off-by: David S. Miller
04 Dec, 2008
1 commit
-
-m486, -O6 are partircularly amusing.
Remove some other useless lines near as well.
Signed-off-by: Alexey Dobriyan
Signed-off-by: David S. Miller
21 Nov, 2008
1 commit
-
Convert this driver to net_device_ops.
Signed-off-by: Stephen Hemminger
Signed-off-by: David S. Miller
11 Nov, 2008
1 commit
-
Acked-by: Marcel Holtmann
Acked-by: Greg Kroah-Hartman
Signed-off-by: Kay Sievers
Signed-off-by: David S. Miller
04 Nov, 2008
1 commit
-
The generic packet receive code takes care of setting
netdev->last_rx when necessary, for the sake of the
bonding ARP monitor.Drivers need not do it any more.
Some cases had to be skipped over because the drivers
were making use of the ->last_rx value themselves.Signed-off-by: David S. Miller
26 Mar, 2008
1 commit
-
Signed-off-by: Al Viro
Signed-off-by: Jeff Garzik
24 Oct, 2007
1 commit
-
The dfx_bus_uninit() call is called from dfx_unregister() which is
__devexit and which is ultimately the ->remove call for the device.Signed-off-by: Maciej W. Rozycki
Signed-off-by: Jeff Garzik
11 Oct, 2007
1 commit
-
It's been a useless no-op for long enough in 2.6 so I figured it's time to
remove it. The number of people that could object because they're
maintaining unified 2.4 and 2.6 drivers is probably rather small.[ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ]
Signed-off-by: Ralf Baechle
Signed-off-by: Jeff Garzik
Signed-off-by: David S. Miller
25 Jul, 2007
1 commit
-
This is a change to remove a local hack in favour to __maybe_unused that
has been recently added.Signed-off-by: Maciej W. Rozycki
Signed-off-by: Jeff Garzik
30 May, 2007
1 commit
-
If ioremap_nocache() is unfortunate enough to fail, the error code is not
set correctly leading to a false success from dfx_register(). This change
fixes the problem.Signed-off-by: Maciej W. Rozycki
Signed-off-by: Jeff Garzik
26 Apr, 2007
2 commits
-
To clearly state the intent of copying to linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.Signed-off-by: Arnaldo Carvalho de Melo
-
Now all the _type_trans routines are consistent in this regard.
Signed-off-by: Arnaldo Carvalho de Melo
Signed-off-by: David S. Miller
10 Feb, 2007
1 commit
-
This is a set of changes to add TURBOchannel support to the defxx driver. As
at this point the EISA support in the driver has become the only not having
been converted to the driver model, I took the opportunity to convert it as
well. Plus support for MMIO in addition to PIO operation as TURBOchannel
requires it anyway.Signed-off-by: Maciej W. Rozycki
Signed-off-by: Andrew Morton
Acked-by: Jeff Garzik
Signed-off-by: Ralf Baechle
02 Dec, 2006
1 commit
-
The PDQ DMA engine requires a different byte-swapping mode for big-endian
hosts; also the MAC address which is read from a register through PIO has
to be byte-swapped. These changes have been verified with DEFPA-DC (PCI)
boards and a Broadcom BCM91250A (MIPS CPU based) host.Signed-off-by: Maciej W. Rozycki
Signed-off-by: Jeff Garzik
05 Oct, 2006
1 commit
-
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.Signed-Off-By: David Howells
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
14 Sep, 2006
1 commit
-
Signed-off-by: Jeff Garzik
20 Aug, 2006
1 commit
-
From: Michal Piotrowski
Signed-off-by: Michal Piotrowski
Signed-off-by: Jeff Garzik
03 Jul, 2006
1 commit
-
Signed-off-by: Thomas Gleixner
Cc: Ingo Molnar
Cc: "David S. Miller"
Cc: Benjamin Herrenschmidt
Cc: Jeff Garzik
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
27 Jun, 2005
1 commit
-
This is a fix for the interrupt handler in the defxx driver to use
irqreturn_t. Beside the obvious fix of returning a proper status at all,
it actually checks board registers as appropriate for determining if an
interrupt has been recorded in the bus-specific interface logic.The patch also includes an obvious one-line fix for SET_NETDEV_DEV needed
for the EISA variation, for which I've decided there is no point in sending
separately.Signed-off-by: Maciej W. Rozycki
Cc: Jeff Garzik
Signed-off-by: Andrew Morton
17 Apr, 2005
1 commit
-
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.Let it rip!
