28 Sep, 2006
1 commit
-
The purpose of this patch is to split off the case when a device does
not reply on the lower level (which is reported by HC hardware), and
a case when the device accepted the request, but does not reply at
upper level. This redefinition allows to diagnose issues easier,
without asking the user if the -110 happened "immediately".The usbmon splits such cases already thanks to its timestamp, but
it's not always available.I adjusted all drivers which I found affected (by searching for "urb").
Out of tree drivers may suffer a little bit, but I do not expect much
breakage. At worst they may print a few messages.Signed-off-by: Pete Zaitcev
Signed-off-by: Greg Kroah-Hartman
27 Sep, 2006
2 commits
-
Update the SH DAC audio driver for the clock framework.
Signed-off-by: Andriy Skulysh
Signed-off-by: Paul Mundt -
Some minor cleanups for the updated consolidated hp6xx
mach-type.Signed-off-by: Andriy Skulysh
Signed-off-by: Paul Mundt
26 Sep, 2006
2 commits
-
The third argument of au1xxx_dbdma_chan_alloc's callback function is not
used anywhere.Signed-off-by: Ralf Baechle
Cc: David Howells
Cc: Russell King
Cc: Alan Cox
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Fixes section-mismatch errors.
Signed-off-by: David S. Miller
25 Sep, 2006
1 commit
-
Signed-off-by: Al Viro
Signed-off-by: Linus Torvalds
23 Sep, 2006
34 commits
-
Free the irq handler in suspend and reacquire in resume as well as
intel8x0 audio driver does. Some devices may change the irq line
dynamically during suspend/resume.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Moved the entry of CONFIG_SND_AC97_POWER_SAVE from drivers/Kconfig to
more appropriate place, pci/Kconfig.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Add a mixer name map for the TerraTec Aureon 5.1 MkII USB.
Signed-off-by: Clemens Ladisch
Signed-off-by: Jaroslav Kysela -
Remove the duplicate and inconsistent initialization of the kcontrol
access field.Signed-off-by: Clemens Ladisch
Signed-off-by: Jaroslav Kysela -
To decrease the USB interrupts rate, increase both the default and the
maximum number of packets per URB.Signed-off-by: Clemens Ladisch
Signed-off-by: Jaroslav Kysela -
Fix/optimize the headphone auto-toggle function on sigmatel codecs.
The headphone pins are kept as output. When headhpones are unplugged,
you cannot hear anyway ;)Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
A slight cleanup of timeout check in azx_get_response() to check
jiffies for HZ-independent timeout.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Fixed mic input with STAC92xx codecs. The mic pin was sometimes set to
OUTPUT by the headphone jack detection.
Also, try to assign a secondary mic as front-mic (or vice versa)
in the auto-detection if possible.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
mixart: Use SEEK_{SET,CUR,END} instead of hardcoded values
Signed-off-by: Josef 'Jeff' Sipek
Signed-off-by: Andrew Morton
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
gus: Use SEEK_{SET,CUR,END} instead of hardcoded values
Signed-off-by: Josef 'Jeff' Sipek
Signed-off-by: Andrew Morton
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
opl4: Use SEEK_{SET,CUR,END} instead of hardcoded values
Signed-off-by: Josef 'Jeff' Sipek
Signed-off-by: Andrew Morton
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
sound core: Use SEEK_{SET,CUR,END} instead of hardcoded values
Signed-off-by: Josef 'Jeff' Sipek
Signed-off-by: Andrew Morton
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Some machines have multiple headpohne pins (usually on the lpatop
and on the docking station) while the current hda-codec driver
assumes a single headphone pin. Now it supports multiple hp pins
(at least for detection).
The sigmatel 92xx code supports this new multiple hp pins.
It detects all hp pins for auto-muting, too.
Also, the driver checks speaker pins in addition. In some cases,
all line-out, speaker and hp-pins coexist.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
If I understand the hda_intel code, for format > 20bit it only advertise
the SNDRV_PCM_FMTBIT_S32_LE format and play it at 32 bit, 20 bit or 24 bit.
But if the 20bit and 24bit are available, actually it prefer the 20bit
format. This path is to prefer the 24bit format instead of 20bit.Signed-off-by: Nicolas Graziano
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Added string entries for Motorola and Conexant vendor ids.
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Added the device id for Motorola si3054-compatible modem codec
on a Gateway laptop.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Added the missing 32bit-compat ioctl entries for ALSA control API
(espcially for recent additions of TLV stuff).Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Fixed Oops when conflictin with aoa driver due to lack of
i2c initialization.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Looks like I completely forgot to do this. This patch adds locking to
the tas codec so two userspace programs can't hit the controls at the
same time. Tested on my powerbook, but I obviously can't find any
problems even without it since it doesn't do SMP.Signed-off-by: Johannes Berg
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Fixed suspend/resume with MSI enablement.
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Remove IPGA volume controls and merge the IPGA range to ADC volume
controls. These two volumes are not really independent but connected
simply in different ranges 0-0x7f and 0x80-max. It doesn't make sense
to provide two controls.
Since both 0x7f and 0x80 specify 0dB, a hack is needed for IPGA range
to skip 0x80 (increment one) for such controls.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
This patch fixes a build error (introduced by me) in ac97_patch.c wrt
WM9705 touchscreen.
o Removed spurious '3D' from character after |= operation (0x3D is
ASCII for '=')Signed-off-by: Liam Girdwood
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Assign the SPDIF always to the secondary device (dev#1) to keep
the same configuration. Move the optional capture device to the
third device (dev#2).
hda_intel now just ignores the NULL entries in the pcm arrays
from codecs.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Fix the order to call pci_disable_msi() to be after free_irq().
(Otherwise pci_disable_msi() bugs you.)
Also, added a description of disable_msi option to documentation.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Added the support for LG LW25 laptop with ALC880 codec.
It's the same codec model as LG LW20 (model=lg-lw).Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
This patch adds a new attribute, pcm_class, to each PCM sysfs entry.
It's useful to detect what kind of PCM stream is, for example, HAL
can check whether it's a modem or not.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
This patch addes the support of the independent 'Headphone' volume
control to the generic codec parser. Some codecs (e.g. Conexant)
have separate connections to the headphone and the independent amp
adjustment is needed.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
This patch adds LFE mixer controls for laptops with a stac9200 and a mono
speaker pin with amplifier.Signed-off-by: Richard Fish
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Added the dB information to ESS Solo (es1938) driver.
The new compound dB range TLVs are used for non-linear native
volume controls.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Fixed the auto-updating of firmware if the breakout box was switched
off/on. The firmware binary itself was already cached but it wasn't
loaded properly. Also, request_firmware() is issued if the box was
with firmware at module loading time but later it's erased.
The auto-update is triggered at each PCM action (open, prepare, etc)
and at opening proc files.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
The dbri driver hangs when used in kernel compiled with SMP
support due to inproper locking. The patch fixes it.Signed-off-by: Krzysztof Helt
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Fix maestro2 hardware volume control. Tested on a Dell Inspiron 7000.
Signed-off-by: Ville Syrjala
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
AD1819 volume registers can hold extra bits which do not affect the
actual volume. Add a res_table to the codec patch to fix the problem.
PCM, line and mic volume were tested.Signed-off-by: Ville Syrjala
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
This patch renames the 965_2112 function ids to 965_3ST, and
adds functional support for 965_5ST (5 stack 7.1 surround).Signed-off-by: Tobin Davis
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela
