24 May, 2011
1 commit
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
b43: fix comment typo reqest -> request
Haavard Skinnemoen has left Atmel
cris: typo in mach-fs Makefile
Kconfig: fix copy/paste-ism for dell-wmi-aio driver
doc: timers-howto: fix a typo ("unsgined")
perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
treewide: fix a few typos in comments
regulator: change debug statement be consistent with the style of the rest
Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
audit: acquire creds selectively to reduce atomic op overhead
rtlwifi: don't touch with treewide double semicolon removal
treewide: cleanup continuations and remove logging message whitespace
ath9k_hw: don't touch with treewide double semicolon removal
include/linux/leds-regulator.h: fix syntax in example code
tty: fix typo in descripton of tty_termios_encode_baud_rate
xtensa: remove obsolete BKL kernel option from defconfig
m68k: fix comment typo 'occcured'
arch:Kconfig.locks Remove unused config option.
treewide: remove extra semicolons
...
17 May, 2011
15 commits
-
Eliminate duplicate code by refactoring the calls to qla2xxx_read_sfp()
in qla2x00_get_thermal_temp(). This keeps the parameter values separate
from the mailbox register mechanics. This also allows qla2xxx_read_sfp()
to be the sole "spec" for READ SFP semantics.Signed-off_by: Joe Carnuccio
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
Make the read/write sfp mailbox command routines uniform, and remove redundancy.
Also protect against attempting to do a single byte dma in these routines.Signed-off-by: Joe Carnuccio
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
Use proper init_cb_size member which takes into account
MID/non-MID init-cb structure sizes.Signed-off-by: Andrew Vasquez
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
The 'max_lun' value registered for each scsi_host is currently
capped at 0xffff. The new module parameter can allow for
2nd-level flat-space addressing method-infrastructure to be
supported.Signed-off-by: Andrew Vasquez
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
Signed-off-by: Saurav Kashyap
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
When reading a single byte using the READ SFP mailbox command, the
single byte of data is returned in MB[1] and not MB[8].The reason that MB[8] was being used is that the spec was unclear
as it evolved over time; and we have not needed to read a single
byte until recently.Signed-off-by: Joe Carnuccio
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
Encapsulate the unlocking of the ROM lock in a function for better
code readability.Signed-off-by: Chad Dupuis
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
Signed-off-by: Chad Dupuis
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
The debug print prints the first byte of the buffer which is buf[8].
Signed-off-by: Joe Carnuccio
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
The driver keeps a copy of the fw_version within the ha structure.
For ISP82xx, this local copy doesn't get updated, and as a result,
the old firmware version ends up getting displayed. This patch fixes
this issue.Signed-off-by: Saurav Kashyap
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
Bumping ref count during fc_vport_terminate() was the cause. vport
delete would wait for ref count to drop to zero and that would never
happen.Cc: stable@kernel.org
Signed-off-by: Arun Easi
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
The firmware spec has the fcp_data_dseg_len defined as a 32-bit
value, while the corresponding field in the driver structure has
it defined as a 16-bit value.Cc: stable@kernel.org
Signed-off-by: Andrew Vasquez
Signed-off-by: Madhuranath Iyengar
Cc: stable@kernel.org
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
This patch ensures qla82xx_watchdog is not being run for the vport. It also
makes sure that beacon ON is not done for the vport, as it will lead to the
waking up of the dpc thread again and again.Signed-off-by: Saurav Kashyap
Signed-off-by: Madhuranath Iyengar
Cc: stable@kernel.org
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley -
Timer is required to flush out entries that may be present in work queues.
Cc: stable@kernel.org
Signed-off-by: Arun Easi
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
Signed-off-by: James Bottomley
01 May, 2011
17 commits
-
A minor change in the versioning. We'll be attaching the "-k"
in the end.Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
Add the inline function qla2x00_set_port_state() so that when a fcport state
transition happens we can log the state transition if debug messages are
enabled.Signed-off-by: Chad Dupuis
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
Before driver's own internal state is marked as PLOGI/PRLI
complete. This additional check closes a window seen with
dual-personality initiator/target devices where a driver's
PLOGI/PRLI request occurs within the window after the target's
PLOGI request has completed, but prior to the target's PRLI
arriving and processed by the firmware. Without this additional
check, the firmware will return port-information stating that the
port neither supports target nor initiator functions, causing the
driver to register the rport prematurely to the FC-transport
without the proper 'roles' being set.Signed-off-by: Andrew Vasquez
Signed-off-by: Giridhar Malavali
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
Signed-off-by: Giridhar Malavali
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
Also, change the ISP82xx code to only reset if this module_param is set
and reset is intended via the QLA82XX_DEV_NEED_RESET case.Signed-off-by: Giridhar Malavali
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
…t the error for ISP82xx.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de> -
If fabric device has invalid loop id (FC_NO_LOOP_ID) then call
qla2x00_find_new_loop_id() to attempt to obtain valid loop id.Signed-off-by: Joe Carnuccio
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
For certain failures, try to recover first by doing FCoE context reset before
attempting big hammer approach(adpater reset).Signed-off-by: Giridhar Malavali
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
The stanadlone call to qla82xx_check_fw_alive() in qla82xx_watchdog()
is a typo, so remove it.Signed-off-by: Giridhar Malavali
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
Signed-off-by: Giridhar Malavali
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
Signed-off-by: Andrew Vasquez
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
Signed-off-by: Andrew Vasquez
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
The upper 16-bits of the handle for all I/O in multi-queue supported
drivers carries the ID of the request queue it was submitted on. When
using Abort I/O IOCB, the driver needs to also populate the upper
16-bits in the handle_to_abort field so the fw can correlate with the
actual I/O.Signed-off-by: Mike Hernandez
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
The bit is already set upon entry.
Signed-off-by: Andrew Vasquez
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
Modifying qla24xx_get_fcp_prio() to return a 'found' status
allows the driver to short circuit the 'set FCP-priority' call
and reduce the amount of noise generated in the messages file:scsi(5): Unable to activate fcp priority, ret=0x102
scsi(5): Unable to activate fcp priority, ret=0x102Also make qla24xx_get_fcp_prio() static.
Signed-off-by: Andrew Vasquez
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
The respective done() functions are called from process context,
so there's no reason to 'defer' the request.Signed-off-by: Andrew Vasquez
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
To provide a clearer translation of the command-status origin in
relation to the midlayer's standard SCSI nexus.Signed-off-by: Andrew Vasquez
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley
26 Apr, 2011
1 commit
-
Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.
10 Apr, 2011
1 commit
-
Signed-off-by: Justin P. Mattock
Signed-off-by: Jiri Kosina
31 Mar, 2011
1 commit
-
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi
18 Mar, 2011
1 commit
-
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits)
[SCSI] scsi_dh_rdac: Add MD36xxf into device list
[SCSI] scsi_debug: add consecutive medium errors
[SCSI] libsas: fix ata list corruption issue
[SCSI] hpsa: export resettable host attribute
[SCSI] hpsa: move device attributes to avoid forward declarations
[SCSI] scsi_debug: Logical Block Provisioning (SBC3r26)
[SCSI] sd: Logical Block Provisioning update
[SCSI] Include protection operation in SCSI command trace
[SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try)
[SCSI] target: Fix volume size misreporting for volumes > 2TB
[SCSI] bnx2fc: Broadcom FCoE offload driver
[SCSI] fcoe: fix broken fcoe interface reset
[SCSI] fcoe: precedence bug in fcoe_filter_frames()
[SCSI] libfcoe: Remove stale fcoe-netdev entries
[SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h
[SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument
[SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs
[SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out"
[SCSI] libfc: Fixing a memory leak when destroying an interface
[SCSI] megaraid_sas: Version and Changelog update
...Fix up trivial conflicts due to whitespace differences in
drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
26 Feb, 2011
3 commits
-
We'll be using the new version number scheme from now on.
The 'k' in the version in the past will be removed.The format will be: ...
A scsi-misc submission increments and resets .
An scsi-rc-fixes submission, increments .Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
The fc_block_scsi_eh() might return with status FAST_IO_FAIL
indicating I/O has been terminated due to fast_io_fail timeout.
In this case the rport is still blocked, so any error recovery
will be failing on this port. Hence we need to check if the
return value from fc_block_scsi_eh() is something other than 0,
in which case it should just return with that status.Signed-off-by: Andrew Vasquez
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley -
If adapter is not online, the driver will not process the response queue, even
on getting an interrupt.Signed-off-by: Saurav Kashyap
Signed-off-by: Madhuranath Iyengar
Signed-off-by: James Bottomley