04 Jul, 2013
1 commit
-
Pull KVM fixes from Paolo Bonzini:
"On the x86 side, there are some optimizations and documentation
updates. The big ARM/KVM change for 3.11, support for AArch64, will
come through Catalin Marinas's tree. s390 and PPC have misc cleanups
and bugfixes"* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (87 commits)
KVM: PPC: Ignore PIR writes
KVM: PPC: Book3S PR: Invalidate SLB entries properly
KVM: PPC: Book3S PR: Allow guest to use 1TB segments
KVM: PPC: Book3S PR: Don't keep scanning HPTEG after we find a match
KVM: PPC: Book3S PR: Fix invalidation of SLB entry 0 on guest entry
KVM: PPC: Book3S PR: Fix proto-VSID calculations
KVM: PPC: Guard doorbell exception with CONFIG_PPC_DOORBELL
KVM: Fix RTC interrupt coalescing tracking
kvm: Add a tracepoint write_tsc_offset
KVM: MMU: Inform users of mmio generation wraparound
KVM: MMU: document fast invalidate all mmio sptes
KVM: MMU: document fast invalidate all pages
KVM: MMU: document fast page fault
KVM: MMU: document mmio page fault
KVM: MMU: document write_flooding_count
KVM: MMU: document clear_spte_count
KVM: MMU: drop kvm_mmu_zap_mmio_sptes
KVM: MMU: init kvm generation close to mmio wrap-around value
KVM: MMU: add tracepoint for check_mmio_spte
KVM: MMU: fast invalidate all mmio sptes
...
27 Jun, 2013
3 commits
-
KVM/ARM pull request for 3.11 merge window
* tag 'kvm-arm-3.11' of git://git.linaro.org/people/cdall/linux-kvm-arm.git:
ARM: kvm: don't include drivers/virtio/Kconfig
Update MAINTAINERS: KVM/ARM work now funded by Linaro
arm/kvm: Cleanup KVM_ARM_MAX_VCPUS logic
ARM: KVM: clear exclusive monitor on all exception returns
ARM: KVM: add missing dsb before invalidating Stage-2 TLBs
ARM: KVM: perform save/restore of PAR
ARM: KVM: get rid of S2_PGD_SIZE
ARM: KVM: don't special case PC when doing an MMIO
ARM: KVM: use phys_addr_t instead of unsigned long long for HYP PGDs
ARM: KVM: remove dead prototype for __kvm_tlb_flush_vmid
ARM: KVM: Don't handle PSCI calls via SMC
ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq -
This reverts most of the f1ed0450a5fac7067590317cbf027f566b6ccbca. After
the commit kvm_apic_set_irq() no longer returns accurate information
about interrupt injection status if injection is done into disabled
APIC. RTC interrupt coalescing tracking relies on the information to be
accurate and cannot recover if it is not.Signed-off-by: Gleb Natapov
-
The arch_timer irq numbers (or PPI numbers) are implementation dependent,
so the host virtual timer irq number can be different from guest virtual
timer irq number.This patch ensures that host virtual timer irq number is read from DTB and
guest virtual timer irq is determined based on vcpu target type.Signed-off-by: Anup Patel
Signed-off-by: Pranavkumar Sawargaonkar
Signed-off-by: Christoffer Dall
04 Jun, 2013
1 commit
-
We can easily reach the 1000 limit by start VM with a couple
hundred I/O devices (multifunction=on). The hardcode limit
already been adjusted 3 times (6 ~ 200 ~ 300 ~ 1000).In userspace, we already have maximum file descriptor to
limit ioeventfd count. But kvm_io_bus devices also are used
for pit, pic, ioapic, coalesced_mmio. They couldn't be limited
by maximum file descriptor.Currently only ioeventfds take too much kvm_io_bus devices,
so just exclude it from counting kvm_io_range limit.Also fixed one indent issue in kvm_host.h
Signed-off-by: Amos Kong
Reviewed-by: Stefan Hajnoczi
Signed-off-by: Gleb Natapov
19 May, 2013
1 commit
-
As KVM/arm64 is looming on the horizon, it makes sense to move some
of the common code to a single location in order to reduce duplication.The code could live anywhere. Actually, most of KVM is already built
with a bunch of ugly ../../.. hacks in the various Makefiles, so we're
not exactly talking about style here. But maybe it is time to start
moving into a less ugly direction.The include files must be in a "public" location, as they are accessed
from non-KVM files (arch/arm/kernel/asm-offsets.c).For this purpose, introduce two new locations:
- virt/kvm/arm/ : x86 and ia64 already share the ioapic code in
virt/kvm, so this could be seen as a (very ugly) precedent.
- include/kvm/ : there is already an include/xen, and while the
intent is slightly different, this seems as good a location as
anyEventually, we should probably have independant Makefiles at every
levels (just like everywhere else in the kernel), but this is just
the first step.Signed-off-by: Marc Zyngier
Signed-off-by: Gleb Natapov
14 May, 2013
1 commit
-
Since the arrival of posted interrupt support we can no longer guarantee
that coalesced IRQs are always reported to the IRQ source. Moreover,
accumulated APIC timer events could cause a busy loop when a VCPU should
rather be halted. The consensus is to remove coalesced tracking from the
LAPIC.Signed-off-by: Jan Kiszka
Acked-by: Marcelo Tosatti
Signed-off-by: Gleb Natapov
12 May, 2013
1 commit
-
Add the missing misc_deregister() before return from kvm_init()
in the debugfs init error handling case.Signed-off-by: Wei Yongjun
Signed-off-by: Gleb Natapov
11 May, 2013
1 commit
-
Pull kvm fixes from Gleb Natapov:
"Most of the fixes are in the emulator since now we emulate more than
we did before for correctness sake we see more bugs there, but there
is also an OOPS fixed and corruption of xcr0 register."* tag 'kvm-3.10-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: emulator: emulate SALC
KVM: emulator: emulate XLAT
KVM: emulator: emulate AAM
KVM: VMX: fix halt emulation while emulating invalid guest sate
KVM: Fix kvm_irqfd_init initialization
KVM: x86: fix maintenance of guest/host xcr0 state
10 May, 2013
1 commit
-
Pull MIPS updates from Ralf Baechle:
- More work on DT support for various platforms
- Various fixes that were to late to make it straight into 3.9
- Improved platform support, in particular the Netlogic XLR and
BCM63xx, and the SEAD3 and Malta eval boards.- Support for several Ralink SOC families.
- Complete support for the microMIPS ASE which basically reencodes the
existing MIPS32/MIPS64 ISA to use non-constant size instructions.- Some fallout from LTO work which remove old cruft and will generally
make the MIPS kernel easier to maintain and resistant to compiler
optimization, even in absence of LTO.- KVM support. While MIPS has announced hardware virtualization
extensions this KVM extension uses trap and emulate mode for
virtualization of MIPS32. More KVM work to add support for VZ
hardware virtualizaiton extensions and MIPS64 will probably already
be merged for 3.11.Most of this has been sitting in -next for a long time. All defconfigs
have been build or run time tested except three for which fixes are being
sent by other maintainers.Semantic conflict with kvm updates done as per Ralf
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits)
MIPS: Add new GIC clockevent driver.
MIPS: Formatting clean-ups for clocksources.
MIPS: Refactor GIC clocksource code.
MIPS: Move 'gic_frequency' to common location.
MIPS: Move 'gic_present' to common location.
MIPS: MIPS16e: Add unaligned access support.
MIPS: MIPS16e: Support handling of delay slots.
MIPS: MIPS16e: Add instruction formats.
MIPS: microMIPS: Optimise 'strnlen' core library function.
MIPS: microMIPS: Optimise 'strlen' core library function.
MIPS: microMIPS: Optimise 'strncpy' core library function.
MIPS: microMIPS: Optimise 'memset' core library function.
MIPS: microMIPS: Add configuration option for microMIPS kernel.
MIPS: microMIPS: Disable LL/SC and fix linker bug.
MIPS: microMIPS: Add vdso support.
MIPS: microMIPS: Add unaligned access support.
MIPS: microMIPS: Support handling of delay slots.
MIPS: microMIPS: Add support for exception handling.
MIPS: microMIPS: Floating point support.
MIPS: microMIPS: Fix macro naming in micro-assembler.
...
09 May, 2013
2 commits
-
Signed-off-by: Sanjay Lal
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle
08 May, 2013
1 commit
-
In commit a0f155e96 'KVM: Initialize irqfd from kvm_init()', when
kvm_init() is called the second time (e.g kvm-amd.ko and kvm-intel.ko),
kvm_arch_init() will fail with -EEXIST, then kvm_irqfd_exit() will be
called on the error handling path. This way, the kvm_irqfd system will
not be ready.This patch fix the following:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [] _raw_spin_lock+0xe/0x30
PGD 0
Oops: 0002 [#1] SMP
Modules linked in: vhost_net
CPU 6
Pid: 4257, comm: qemu-system-x86 Not tainted 3.9.0-rc3+ #757 Dell Inc. OptiPlex 790/0V5HMK
RIP: 0010:[] [] _raw_spin_lock+0xe/0x30
RSP: 0018:ffff880221721cc8 EFLAGS: 00010046
RAX: 0000000000000100 RBX: ffff88022dcc003f RCX: ffff880221734950
RDX: ffff8802208f6ca8 RSI: 000000007fffffff RDI: 0000000000000000
RBP: ffff880221721cc8 R08: 0000000000000002 R09: 0000000000000002
R10: 00007f7fd01087e0 R11: 0000000000000246 R12: ffff8802208f6ca8
R13: 0000000000000080 R14: ffff880223e2a900 R15: 0000000000000000
FS: 00007f7fd38488e0(0000) GS:ffff88022dcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000022309f000 CR4: 00000000000427e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process qemu-system-x86 (pid: 4257, threadinfo ffff880221720000, task ffff880222bd5640)
Stack:
ffff880221721d08 ffffffff810ac5c5 ffff88022431dc00 0000000000000086
0000000000000080 ffff880223e2a900 ffff8802208f6ca8 0000000000000000
ffff880221721d48 ffffffff810ac8fe 0000000000000000 ffff880221734000
Call Trace:
[] __queue_work+0x45/0x2d0
[] queue_work_on+0x8e/0xa0
[] queue_work+0x19/0x20
[] irqfd_deactivate+0x4b/0x60
[] kvm_irqfd+0x39d/0x580
[] kvm_vm_ioctl+0x207/0x5b0
[] ? update_curr+0xf5/0x180
[] do_vfs_ioctl+0x98/0x550
[] ? finish_task_switch+0x4e/0xe0
[] ? __schedule+0x2ea/0x710
[] sys_ioctl+0x57/0x90
[] ? trace_hardirqs_on_thunk+0x3a/0x3c
[] system_call_fastpath+0x16/0x1b
Code: c1 ea 08 38 c2 74 0f 66 0f 1f 44 00 00 f3 90 0f b6 03 38 c2 75 f7 48 83 c4 08 5b c9 c3 55 48 89 e5 66 66 66 66 90 b8 00 01 00 00 66 0f c1 07 89 c2 66 c1 ea 08 38 c2 74 0c 0f 1f 00 f3 90 0f
RIP [] _raw_spin_lock+0xe/0x30
RSP
CR2: 0000000000000000
---[ end trace 13fb1e4b6e5ab21f ]---Signed-off-by: Asias He
Acked-by: Cornelia Huck
Signed-off-by: Gleb Natapov
06 May, 2013
1 commit
-
Pull kvm updates from Gleb Natapov:
"Highlights of the updates are:general:
- new emulated device API
- legacy device assignment is now optional
- irqfd interface is more generic and can be shared between archesx86:
- VMCS shadow support and other nested VMX improvements
- APIC virtualization and Posted Interrupt hardware support
- Optimize mmio spte zappingppc:
- BookE: in-kernel MPIC emulation with irqfd support
- Book3S: in-kernel XICS emulation (incomplete)
- Book3S: HV: migration fixes
- BookE: more debug support preparation
- BookE: e6500 supportARM:
- reworking of Hyp idmapss390:
- ioeventfd for virtio-ccwAnd many other bug fixes, cleanups and improvements"
* tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
kvm: Add compat_ioctl for device control API
KVM: x86: Account for failing enable_irq_window for NMI window request
KVM: PPC: Book3S: Add API for in-kernel XICS emulation
kvm/ppc/mpic: fix missing unlock in set_base_addr()
kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write
kvm/ppc/mpic: remove users
kvm/ppc/mpic: fix mmio region lists when multiple guests used
kvm/ppc/mpic: remove default routes from documentation
kvm: KVM_CAP_IOMMU only available with device assignment
ARM: KVM: iterate over all CPUs for CPU compatibility check
KVM: ARM: Fix spelling in error message
ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally
KVM: ARM: Fix API documentation for ONE_REG encoding
ARM: KVM: promote vfp_host pointer to generic host cpu context
ARM: KVM: add architecture specific hook for capabilities
ARM: KVM: perform HYP initilization for hotplugged CPUs
ARM: KVM: switch to a dual-step HYP init code
ARM: KVM: rework HYP page table freeing
ARM: KVM: enforce maximum size for identity mapped code
ARM: KVM: move to a KVM provided HYP idmap
...
05 May, 2013
1 commit
-
This API shouldn't have 32/64-bit issues, but VFS assumes it does
unless told otherwise.Signed-off-by: Scott Wood
Signed-off-by: Gleb Natapov
02 May, 2013
1 commit
-
This adds the API for userspace to instantiate an XICS device in a VM
and connect VCPUs to it. The API consists of a new device type for
the KVM_CREATE_DEVICE ioctl, a new capability KVM_CAP_IRQ_XICS, which
functions similarly to KVM_CAP_IRQ_MPIC, and the KVM_IRQ_LINE ioctl,
which is used to assert and deassert interrupt inputs of the XICS.The XICS device has one attribute group, KVM_DEV_XICS_GRP_SOURCES.
Each attribute within this group corresponds to the state of one
interrupt source. The attribute number is the same as the interrupt
source number.This does not support irq routing or irqfd yet.
Signed-off-by: Paul Mackerras
Acked-by: David Gibson
Signed-off-by: Alexander Graf
27 Apr, 2013
9 commits
-
The hassle of getting refcounting right was greater than the hassle
of keeping a list of devices to destroy on VM exit.Signed-off-by: Scott Wood
Signed-off-by: Alexander Graf -
Hook the MPIC code up to the KVM interfaces, add locking, etc.
Signed-off-by: Scott Wood
[agraf: add stub function for kvmppc_mpic_set_epr, non-booke, 64bit]
Signed-off-by: Alexander Graf -
Currently, devices that are emulated inside KVM are configured in a
hardcoded manner based on an assumption that any given architecture
only has one way to do it. If there's any need to access device state,
it is done through inflexible one-purpose-only IOCTLs (e.g.
KVM_GET/SET_LAPIC). Defining new IOCTLs for every little thing is
cumbersome and depletes a limited numberspace.This API provides a mechanism to instantiate a device of a certain
type, returning an ID that can be used to set/get attributes of the
device. Attributes may include configuration parameters (e.g.
register base address), device state, operational commands, etc. It
is similar to the ONE_REG API, except that it acts on devices rather
than vcpus.Both device types and individual attributes can be tested without having
to create the device or get/set the attribute, without the need for
separately managing enumerated capabilities.Signed-off-by: Scott Wood
Signed-off-by: Alexander Graf -
Now that we have most irqfd code completely platform agnostic, let's move
irqfd's resample capability return to generic code as well.Signed-off-by: Alexander Graf
Acked-by: Michael S. Tsirkin -
Setting up IRQ routes is nothing IOAPIC specific. Extract everything
that really is generic code into irqchip.c and only leave the ioapic
specific bits to irq_comm.c.Signed-off-by: Alexander Graf
Acked-by: Michael S. Tsirkin -
The current irq_comm.c file contains pieces of code that are generic
across different irqchip implementations, as well as code that is
fully IOAPIC specific.Split the generic bits out into irqchip.c.
Signed-off-by: Alexander Graf
Acked-by: Michael S. Tsirkin -
The IRQ routing set ioctl lives in the hacky device assignment code inside
of KVM today. This is definitely the wrong place for it. Move it to the much
more natural kvm_main.c.Signed-off-by: Alexander Graf
Acked-by: Michael S. Tsirkin -
Quite a bit of code in KVM has been conditionalized on availability of
IOAPIC emulation. However, most of it is generically applicable to
platforms that don't have an IOPIC, but a different type of irq chip.Make code that only relies on IRQ routing, not an APIC itself, on
CONFIG_HAVE_KVM_IRQ_ROUTING, so that we can reuse it later.Signed-off-by: Alexander Graf
Acked-by: Michael S. Tsirkin -
The concept of routing interrupt lines to an irqchip is nothing
that is IOAPIC specific. Every irqchip has a maximum number of pins
that can be linked to irq lines.So let's add a new define that allows us to reuse generic code for
non-IOAPIC platforms.Signed-off-by: Alexander Graf
Acked-by: Michael S. Tsirkin
17 Apr, 2013
3 commits
-
Only deliver the posted interrupt when target vcpu is running
and there is no previous interrupt pending in pir.Signed-off-by: Yang Zhang
Reviewed-by: Gleb Natapov
Signed-off-by: Marcelo Tosatti -
We already know the trigger mode of a given interrupt when programming
the ioapice entry. So it's not necessary to set it in each interrupt
delivery.Signed-off-by: Yang Zhang
Reviewed-by: Gleb Natapov
Signed-off-by: Marcelo Tosatti -
Both TMR and EOI exit bitmap need to be updated when ioapic changed
or vcpu's id/ldr/dfr changed. So use common function instead eoi exit
bitmap specific function.Signed-off-by: Yang Zhang
Reviewed-by: Gleb Natapov
Signed-off-by: Marcelo Tosatti
16 Apr, 2013
7 commits
-
Current interrupt coalescing logci which only used by RTC has conflict
with Posted Interrupt.
This patch introduces a new mechinism to use eoi to track interrupt:
When delivering an interrupt to vcpu, the pending_eoi set to number of
vcpu that received the interrupt. And decrease it when each vcpu writing
eoi. No subsequent RTC interrupt can deliver to vcpu until all vcpus
write eoi.Signed-off-by: Yang Zhang
Reviewed-by: Gleb Natapov
Signed-off-by: Marcelo Tosatti -
Userspace may deliver RTC interrupt without query the status. So we
want to track RTC EOI for this case.Signed-off-by: Yang Zhang
Reviewed-by: Gleb Natapov
Signed-off-by: Marcelo Tosatti -
Need the EOI to track interrupt deliver status, so force vmexit
on EOI for rtc interrupt when enabling virtual interrupt delivery.Signed-off-by: Yang Zhang
Reviewed-by: Gleb Natapov
Signed-off-by: Marcelo Tosatti -
restore rtc_status from migration or save/restore
Signed-off-by: Yang Zhang
Reviewed-by: Gleb Natapov
Signed-off-by: Marcelo Tosatti -
Add a new parameter to know vcpus who received the interrupt.
Signed-off-by: Yang Zhang
Reviewed-by: Gleb Natapov
Signed-off-by: Marcelo Tosatti -
rtc_status is used to track RTC interrupt delivery status. The pending_eoi
will be increased by vcpu who received RTC interrupt and will be decreased
when EOI to this interrupt.
Also, we use dest_map to record the destination vcpu to avoid the case that
vcpu who didn't get the RTC interupt, but issued EOI with same vector of RTC
and descreased pending_eoi by mistake.Signed-off-by: Yang Zhang
Reviewed-by: Gleb Natapov
Signed-off-by: Marcelo Tosatti -
Add vcpu info to ioapic_update_eoi, so we can know which vcpu
issued this EOI.Signed-off-by: Yang Zhang
Reviewed-by: Gleb Natapov
Signed-off-by: Marcelo Tosatti
08 Apr, 2013
2 commits
-
The routine kvm_spurious_fault() is an x86 specific routine, so
move it from virt/kvm/kvm_main.c to arch/x86/kvm/x86.c.Fixes this sparse warning when building on arm64:
virt/kvm/kvm_main.c:warning: symbol 'kvm_spurious_fault' was not declared. Should it be static?
Signed-off-by: Geoff Levand
Signed-off-by: Gleb Natapov -
The routines get_user_page_nowait(), kvm_io_bus_sort_cmp(), kvm_io_bus_insert_dev()
and kvm_io_bus_get_first_dev() are only referenced within kvm_main.c, so give them
static linkage.Fixes sparse warnings like these:
virt/kvm/kvm_main.c: warning: symbol 'get_user_page_nowait' was not declared. Should it be static?
Signed-off-by: Geoff Levand
Signed-off-by: Gleb Natapov
07 Apr, 2013
3 commits
-
PIO and MMIO are separate address spaces, but
ioeventfd registration code mistakenly detected
two eventfds as duplicate if they use the same address,
even if one is PIO and another one MMIO.Reviewed-by: Paolo Bonzini
Signed-off-by: Michael S. Tsirkin
Signed-off-by: Gleb Natapov -
For a given vcpu, kvm_apic_match_dest() will tell you whether
the vcpu in the destination list quickly. Drop kvm_calculate_eoi_exitmap()
and use kvm_apic_match_dest() instead.Signed-off-by: Yang Zhang
Signed-off-by: Gleb Natapov -
This patch adds support for kvm_gfn_to_hva_cache_init functions for
reads and writes that will cross a page. If the range falls within
the same memslot, then this will be a fast operation. If the range
is split between two memslots, then the slower kvm_read_guest and
kvm_write_guest are used.Tested: Test against kvm_clock unit tests.
Signed-off-by: Andrew Honig
Signed-off-by: Gleb Natapov
