19 Jul, 2013
2 commits
-
This patch is copied from commit 25b7679136fd85b1e5197e36a0ca126163e89590
Just unable to cherry-pick due to different file names.The ASoC core tries to not enforce symmetric rates when
two streams open simultaneously. It does so by checking
rtd->rate being zero. This works exactly once after booting
because it is not set to zero again when the streams close.
Fix this by setting rtd->rate when no active stream is left.[This leads to lots of warnings about not enforcing the symmetry in some
situations as there's a race in the userspace API where we know we've
got two applications but don't know what rates they want to set.
-- broonie ]Signed-off-by: Sascha Hauer
Signed-off-by: Mark Brown
Signed-off-by: Nicolin Chen -
In probe(), we set LEFT_ADC_VOLUME but failed to set RIGHT_ADC_VOLUME due to
typo during coding, thus fix it.Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen
(cherry picked from commit ae3eb591ed9f61579a4217c6ddfd19d32e8f3cc5)
11 Jul, 2013
1 commit
-
WM8962 doesn't support asymmetric parameters for playback and capture,
so add hw_params check in machine driver to obviate some potential risks.Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen
(cherry picked from commit 85059ec43e34662feca2c58b3a31cf93d79d00bc)
04 Jun, 2013
1 commit
-
Use __devinit instead of __int to fix section mismatch issue.
Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen
10 Apr, 2013
4 commits
-
There might be a case that SYSCLK_SRC is not FLL, but FLL's still open.
If so, next time we use FLL as SYSCLK_SRC, it won't work normally.This patch disabled FLL if FLL's enabled no matter what SYSCLK_SRC is.
Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen -
This reverts commit 0ed997878dd59c1dac6bf8f9eda412790bdd1df6.
We already reverted FLL-enable code in set_fll(), so we don't need delay any
more.Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen -
This reverts commit 85c5c1eb91a25787f8cdefdb40bcd4735d37270e.
With this patch, WM8962 couldn't work normally after SabreSD power-on.
So revert it and find a better solution.Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen -
This reverts commit 1fe3d0961814ad1fb1c1d691bfb85fc664caab05.
With this patch, WM8962 couldn't work normally after SabreSD power-on.
So revert it and find a better solution.Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen
02 Apr, 2013
4 commits
-
There's a start-up time after FLL_ENA bit is set. While the driver didn't
run the delay code which already exists in the set_fll() function.
This patch let the driver run into the delay section, and made it work more
perfectly.Signed-off-by: Nicolin Chen
-
Previously, we didn't close FLL after playback/capture, which might cause
FLL work werid after a long time suspend.
This patch manually disables FLL after playback/capture.Signed-off-by: Nicolin Chen
-
Only enable and disable the FLL when explicitly told to, supporting some
additional use cases and making the driver behaviour more standard.Signed-off-by: Mark Brown
Signed-off-by: Nicolin Chen
(cherry picked from commit a968d9db3b3a9329587b09bd15f4981473c63a9d) -
In this commit 957bc47ffbad8532f0e8f6463946e8c04bc3176f, add msleep(400)
for reducing noise in the hw_params, but this time is very long for opening
device.
In this patch, remove this time and use the "Soft Ramp on Zero Crossings" to
reduce the noise.Signed-off-by: b02247
01 Apr, 2013
2 commits
-
WM8962's internal FLL is sourced from MCLK on SabreSD, while the machine
driver set its source to OSC, which's definitely wrong.
So This patch changed its source to MCLK to prevent some potential issue.Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen -
The patch at the commit 30293bc6 dropped FLL-disabling code from wm8962
driver, which was a work around for CR 00209905. Since we fixed the issue in
a better way(commit 018958f4), we don't need the work around any more.
And in wm8962's datasheet, Wolfson suggests that driver should disable and
re-enable the FLL after the other registers're updated. So it's better for us
to revert the code to prevent some potential issue.Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen
22 Mar, 2013
1 commit
-
HDMI-audio depends on HDMI-video. If users want to use HDMI-audio function,
they need to load HDMI-video first. Sometime users would forget to put video
info into U-boot cmdline, "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24" for
example. That might cause HDMI-auido driver fail to detect HDMI-video.
Previously, if this happened to system, driver only returned with "ENOMEM"
and system would print "Can't allocate memory". This might confuse users due
to the vague infomation. Users would be hard to figure out the root cause.
So this patch just add some error message to give users a clear indication,
and changed the "ENOMEM" error number to the more precise "ENODEV".Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen
21 Mar, 2013
1 commit
-
The function might be returned if the CNEW wasn't detected, while in this
case the code won't disable the clk.
This patch just fixed the mismatch.Signed-off-by: Nicolin Chen
12 Mar, 2013
1 commit
-
spdif driver registered kcontrol for ALSA subsystem controlling, while some
of those kcontrol functions lack of clk_enable() before register-accessing. So
system would definitely hang when those functions're called, which did happen
during reboot test on Ubuntu due to its pulse-audio.
This patch added paired clk_en/disable() to those functions so as to pevent
system hang issue.Acked-by: Wang Shengjiu
Tested-by: Anson Huang
Signed-off-by: Nicolin Chen
08 Mar, 2013
2 commits
-
If DAC volume's set to a value that's lower than 0xd8, contineously FLL
setting of wm8962 in machine driver would cause playback distortion issue,
which happens to ENGR219882. so we have to put some another code in machine
driver to prevent distortion issue.Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen -
We put some code to set default volumes in codec driver, but later we found
that one of volume was higher than 0db, which would cause over-gained volume.
So this patch removed DAC default volume setting, and reverted the volume
interface of it to let user control the register from user space.Acked-by: Wang Shengjiu
Signed-off-by: Nicolin Chen
05 Jan, 2013
2 commits
-
add judgement to avoid no detect pin case
Signed-off-by: Gary Zhang
-
locate SSI playback buffer into IRAM in mx6sl.
because left IRAM room is not enough to contain record
buffer, if IRAM allocation for record fails, record
buffer will use external ramSigned-off-by: Gary Zhang
19 Dec, 2012
1 commit
-
use alsa jack mechanism to handle pin detection
Signed-off-by: Gary Zhang
11 Dec, 2012
2 commits
-
implement headphone and speaker automatically switch
even if headphone is plugin/out during suspendSigned-off-by: Gary Zhang
-
soc_pcm_trigger() calls trigger functions of cpu_dai, codec_dai
and platform, but the trigger function of machine is not called.
add calling of trigger in machine driver in soc_pcm_trigger()Signed-off-by: Gary Zhang
28 Nov, 2012
1 commit
-
when detect hp inserted, disable speaker; when hp is plugout,
enable speaker.Signed-off-by: Gary Zhang
15 Nov, 2012
4 commits
-
In ASoC ESAI machine driver, use ASRC ops instead of directly use ASRC
function calling, so that it can support ASRC loadable.Signed-off-by: Ge Lei
-
In ASoC pcm platform driver, use function pointer(ASRC ops) and hook to call
the APIs in ASRC driver, so that the ASoC platform driver can support ASRC
loadable.Signed-off-by: Ge Lei
-
Patch ENGR00233056 added DMABUF size setting for hw_param and changed SSI's
buffer allocating size.
But didn't add allocation for ESAI and SPDIF, which might cause some dma
transmitting issue.
This Patch add new allocation code that detects the driver before allocating
its DMABUF.Signed-off-by: Nicolin Chen
-
when using DMIX for ALSA playback, ALSA would not update write index
into driver but maintain it in ALSA LIB level. However, HDMI driver
need write index for HDMI header packing. In this case, HDMI driver
would fail to do HDMI header pack and user hear no sound when using DMIX
in HDMI audio playback.In this patch, use read index(hw_ptr) for HDMI header packing.
Signed-off-by: Chen Liangjun
12 Nov, 2012
1 commit
-
Previously SSI/ESAI/SPDIF used one same-sized buffers and watermark(the
WM in the title) for every alsa driver.This patch allow each driver config its own buffer size and watermark,
which is obviously more flexible.Also, it sets SSI's buffersize from 256k to 64k.
Signed-off-by: Nicolin Chen
02 Nov, 2012
1 commit
-
To adjust the channel support capability, codec dai does not support mono
playback and record, while esai dai does, thus making the whole audio
codec only support stereo and above channel playback/record.Signed-off-by: Lionel Xu
30 Oct, 2012
1 commit
-
add clk operation in mxc_pb_spdif_put function
Signed-off-by: Gary Zhang
29 Oct, 2012
1 commit
-
1. correct indent issue
2. when driver is unloaded, remove disable clock operateion and free irqSigned-off-by: Gary Zhang
24 Oct, 2012
2 commits
-
Export gloable variable in HDMI AUDIO platform driver to support HDMI
AUDIO codec driver's loadable build.Signed-off-by: Chen Liangjun
-
HDMI driver can be divided into 3 parts: machine driver, platform
driver, codec driver.To support HDMI AUDIO loadable module build, HDMI
machine driver should be built as loadable.In this patch, adjust HDMI audio driver's struct: move HDMI audio platform
driver to snd-soc-imx-objs(snd-soc-imx-objs would always be
build-in).In this case, user need only build HDMI AUDIO machine driver
as loadable.Signed-off-by: Chen Liangjun
27 Sep, 2012
1 commit
-
because HDMI AUDIO in mx6sl evk comes from SPDIF TX, change to
HDMI AUDIO in device name.Signed-off-by: Gary Zhang
19 Sep, 2012
2 commits
-
Wolfson suggests that digital volume should not be changed by user
to avoid affecting SNR and dynamic range, and user should adjust
analog volume.Signed-off-by: Gary Zhang
-
HDMI hardware fix: signal of HDMI DMA DONE is hard connected to SDMA
event line. SDMA event is triggered by edge. If the HDMI DMA done is
already 1 before start, there would be no SDMA event being trigged after
HDMI generates another HDMI DONE signal.In this patch, clear HDMI DONE bit before start HDMI audio DMA.
Signed-off-by: Chen Liangjun
14 Sep, 2012
1 commit
-
When unplug, blank happens, HDMI audio can't play properly. So in
driver, audio pcm would be disconnected when event above happens.
However, pulse audio can't process disconnect event properly and if an
blank or unplug event happens, HDMI sink would lost and can't be back
again.In this patch, instead of disconnecting audio PCM stream, triggering
stop audio pcm while unplug and blank, triggering start again while plug
and unblank if the audio pcm is triggerd stop in the unplug/blank event.
Signed-off-by: Chen Liangjun
13 Sep, 2012
1 commit
-
HDMI audio driver is responsible for add IEC header into audio sample.
In HDMI audio driver, a variable named rtd->appl_bytes is maintained to
stand for how many audio sample have already processed. appl_bytes
stands for how many audio sample the user space have already feed into
kernel driver. So we use the connt = appl_bytes - rtd->appl_bytes to
decide how many data need to be processed. And the processed data would
be write into an preallocated buffer called hw_buf in driver.When doing seek operation, the appl_bytes changes in an wide range. So
it is possible that the count value is far larger than the size of
hw_buf and the memory access un-existed address error would happens.In this patch, Add check operation for count to avoid kernel panic.
Kernel panic log:
seeking: 0:00:18.000000000/0:03:0Unable to handle kernel paging request
at virtual address ffdf0000
pgd = 80004000
[ffdf0000] *pgd=71e35811, *pte=00000000, *ppte=00000000
Internal error: Oops: 7 [#1] PREEMPT SMP
Modules linked in: vivante drm galcore
CPU: 0 Not tainted (3.0.35-2014-g7a9337b #1)
PC is at hdmi_dma_mmap_copy+0x134/0x190
LR is at hdmi_dma_mmap_copy+0x5c/0x190
pc : [] lr : [] psr: 800f0193
sp : 80a61e98 ip : ffdf0000 fp : ffdeffc0
r10: 00000055 r9 : ffdeff80 r8 : 0029b450
r7 : 00000060 r6 : ffdf0200 r5 : 00000240 r4 : 00000120
r3 : 00000000 r2 : ffdf0000 r1 : 00000000 r0 : 00000090
Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c53c7d Table: 6d28804a DAC: 00000015
Process swapper (pid: 0, stack limit = 0x80a602f0)
Stack: (0x80a61e98 to 0x80a62000)
1e80: 00000002
000037f1
1ea0: 00006000 e1d3a7e4 a00f0193 e1d3a780 e1dcab00 00a83100 00a83100
00006000
1ec0: 00006000 803e24f4 413187b9 00000000 0073001a e1dd1e00 00000001
00000001
1ee0: 00000080 00000093 80ac7070 80a66a80 00000001 800a5ca8 8c80e568
efb3e7b9
1f00: 00000055 80a66a80 80a66acc e1ea9bc0 00000093 00000000 80a60000
00000000
1f20: 00000000 800a5e14 80a66a80 80a66acc 0000107f 800a8198 80a71cc0
80038c00
1f40: 80a60000 800a5610 000001f0 80040830 ffffffff f2a00100 00000093
00000002
1f60: 00000001 8003f9cc 80ac5f60 800f0093 00000001 00000000 80a60000
80abeb64
1f80: 804e1a54 80a74e7c 1000406a 412fc09a 00000000 00000000 00000000
80a61fb0
1fa0: 8004d52c 80040ac4 400f0013 ffffffff 80040aa0 80040cbc 00000001
80a71b3c
1fc0: 80abeac0 8002e3c4 8c80b140 80008868 800082f8 00000000 00000000
8002e3c4
1fe0: 00000000 10c53c7d 80a71a6c 8002e3c0 80a74e74 10008040 00000000
00000000
[] (hdmi_dma_mmap_copy+0x134/0x190) from []
(hdmi_dma_isr+0x17c/0x1a0)
[] (hdmi_dma_isr+0x17c/0x1a0) from []
(handle_irq_event_percpu+0x50/0x180)
[] (handle_irq_event_percpu+0x50/0x180) from []
(handle_irq_event+0x3c/0x5c)
[] (handle_irq_event+0x3c/0x5c) from []
(handle_fasteoi_irq+0xbc/0x154)
[] (handle_fasteoi_irq+0xbc/0x154) from []
(generic_handle_irq+0x28/0x3c)
[] (generic_handle_irq+0x28/0x3c) from []
(handle_IRQ+0x4c/0xac)
[] (handle_IRQ+0x4c/0xac) from []
(__irq_svc+0x4c/0xe8)
[] (__irq_svc+0x4c/0xe8) from []
(default_idle+0x24/0x28)
[] (default_idle+0x24/0x28) from []
(cpu_idle+0xbc/0xfc)
[] (cpu_idle+0xbc/0xfc) from []
(start_kernel+0x248/0x288)
[] (start_kernel+0x248/0x288) from [] (0x10008040)
Code: c1a0c009 c08b6005 c1a0200b da00000a (e0d230b2)Signed-off-by: Chen Liangjun