Eric Lee / smarc-fsl-linux-kernel

19 Dec, 2011

1 commit

  • a67ff6a54   ALSA: module_param: make bool parameters really bool ... Browse Code »

    module_param(bool) used to counter-intuitively take an int. In
    fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
    trick.

    It's time to remove the int/unsigned int option. For this version
    it'll simply give a warning, but it'll break next kernel version.

    Signed-off-by: Rusty Russell
    Signed-off-by: Takashi Iwai

    Rusty Russell
     

01 Nov, 2011

2 commits

22 Sep, 2011

1 commit

  • 88e24c3a4   sound: irq: Remove IRQF_DISABLED ... Browse Code »

    Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
    We run all interrupt handlers with interrupts disabled
    and we even check and yell when an interrupt handler
    returns with interrupts enabled (see commit [b738a50a:
    genirq: Warn when handler enables interrupts]).

    So now this flag is a NOOP and can be removed.

    Signed-off-by: Yong Zhang
    Acked-by: Peter Ujfalusi
    Acked-by: Mark Brown
    Signed-off-by: Takashi Iwai

    Yong Zhang
     

14 Sep, 2011

1 commit

  • dba8b4699   ALSA: mpu401: clean up interrupt specification ... Browse Code »

    The semantics of snd_mpu401_uart_new()'s interrupt parameters are
    somewhat counterintuitive: To prevent the function from allocating its
    own interrupt, either the irq number must be invalid, or the irq_flags
    parameter must be zero. At the same time, the irq parameter being
    invalid specifies that the mpu401 code has to work without an interrupt
    allocated by the caller. This implies that, if there is an interrupt
    and it is allocated by the caller, the irq parameter must be set to
    a valid-looking number which then isn't actually used.

    With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
    which forces us to handle the parameters differently.

    This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
    device interrupt is handled by the caller, and makes the allocation of
    the interrupt to depend only on the irq parameter. As suggested by
    Takashi, the irq_flags parameter was dropped because, when used, it had
    the constant value IRQF_DISABLED.

    Signed-off-by: Clemens Ladisch
    Signed-off-by: Takashi Iwai

    Clemens Ladisch
     

17 May, 2010

1 commit

  • b0fb75ad5   ALSA: es1688: add pedantic range checks ... Browse Code »

    Smatch complains that if (dev == SNDRV_CARDS) we're one past the end of
    the array. That's unlikely to happen in real life, I suppose.

    Also smatch complains about "strcpy(card->shortname, pcm->name);"
    The "pcm->name" buffer is 80 characters and "card->shortname" is 32
    characters. If you follow the call paths it turns out we never actually
    use more than 16 characters so it's not a problem. But anyway, let's
    make it easy for people auditing this in the future.

    Signed-off-by: Dan Carpenter
    Signed-off-by: Takashi Iwai

    Dan Carpenter
     

10 May, 2010

2 commits

  • a20971b20   ALSA: Merge es1688 and es968 drivers ... Browse Code »

    The ESS ES968 chip is nothing more then a PnP companion
    for a non-PnP audio chip. It was paired with non-PnP ESS' chips:
    ES688 and ES1688. The ESS' audio chips are handled by the es1688
    driver in native mode. The PnP cards are handled by the ES968
    driver in SB compatible mode.

    Move the ES968 chip handling to the es1688 driver so the driver
    can handle both PnP and non-PnP cards. The es968 is removed.

    Also, a new PnP id is added for the card I acquired (the change
    was tested on this card).

    Signed-off-by: Krzysztof Helt
    Signed-off-by: Takashi Iwai

    Krzysztof Helt
     
  • 396fa8272   ALSA: es1688: allocate snd_es1688 structure as a part of snd_card structure ... Browse Code »

    Allocate the snd_es1688 during the snd_card allocation.
    This allows to remove the card pointer from the snd_es1688 structure.

    Signed-off-by: Krzysztof Helt
    Signed-off-by: Takashi Iwai

    Krzysztof Helt
     

05 Nov, 2009

1 commit

  • d355c82a0   ALSA: rename "PC Speaker" and "PC Beep" controls to "Beep" ... Browse Code »

    To avoid confusion in control names for the standard analog PC Beep generator
    using a small Internal PC Speaker, rename all related "PC Speaker" and "PC
    Beep" controls to "Beep" only. This name is more universal and can be also
    used on more platforms without confusion.

    Introduce also "Internal Speaker" in ControlNames.txt for systems with
    full-featured build-in internal speaker.

    Signed-off-by: Jaroslav Kysela
    Signed-off-by: Takashi Iwai

    Jaroslav Kysela
     

04 Jun, 2009

1 commit

17 Feb, 2009

1 commit

05 Feb, 2009

1 commit

31 Jan, 2009

1 commit

12 Jan, 2009

1 commit

03 Nov, 2008

1 commit

13 Aug, 2008

1 commit

01 Feb, 2008

1 commit

  • 9004acc70   [ALSA] Remove sound/driver.h ... Browse Code »

    This header file exists only for some hacks to adapt alsa-driver
    tree. It's useless for building in the kernel. Let's move a few
    lines in it to sound/core.h and remove it.
    With this patch, sound/driver.h isn't removed but has just a single
    compile warning to include it. This should be really killed in
    future.

    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Takashi Iwai
     

16 Oct, 2007

1 commit

11 May, 2007

2 commits

  • 019608b63   [ALSA] es1688 - code clean-up ... Browse Code »

    Seperate out the legacy probing into its own function, improving
    readability.

    Signed-off-by: Rene Herman
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Rene Herman
     
  • ae5961869   [ALSA] isa_bus: es1688 ... Browse Code »

    es1688: port to isa_bus infrastructure. very slight reorganization of
    the auto-probe code to be a bit easier on the eye (if not the senses).

    Signed-off-by: Rene Herman
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Rene Herman
     

14 Feb, 2007

1 commit

  • 788c60433   [ALSA] Fix __devinit and __devexit issues with sound drivers ... Browse Code »

    Fix __devinit and __devexit issues with sound drivers.
    Resolves MODPOST warnings similar to:
    WARNING: sound/drivers/snd-dummy.o - Section mismatch: reference to .init.text:snd_dummy_probe from .data.rel.local between 'snd_dummy_driver' (at offset 0x0) and 'snd_dummy_controls'
    WARNING: sound/drivers/snd-mtpav.o - Section mismatch: reference to .init.text:snd_mtpav_probe from .data.rel.local between 'snd_mtpav_driver' (at offset 0x0) and 'snd_mtpav_input'
    WARNING: sound/drivers/snd-virmidi.o - Section mismatch: reference to .init.text:snd_virmidi_probe from .data.rel.local after 'snd_virmidi_driver' (at offset 0x0)

    Signed-off-by: Prarit Bhargava
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Prarit Bhargava
     

05 Oct, 2006

1 commit

  • 7d12e780e   IRQ: Maintain regs pointer globally rather than passing to IRQ handlers ... Browse Code »

    Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
    of passing regs around manually through all ~1800 interrupt handlers in the
    Linux kernel.

    The regs pointer is used in few places, but it potentially costs both stack
    space and code to pass it around. On the FRV arch, removing the regs parameter
    from all the genirq function results in a 20% speed up of the IRQ exit path
    (ie: from leaving timer_interrupt() to leaving do_IRQ()).

    Where appropriate, an arch may override the generic storage facility and do
    something different with the variable. On FRV, for instance, the address is
    maintained in GR28 at all times inside the kernel as part of general exception
    handling.

    Having looked over the code, it appears that the parameter may be handed down
    through up to twenty or so layers of functions. Consider a USB character
    device attached to a USB hub, attached to a USB controller that posts its
    interrupts through a cascaded auxiliary interrupt controller. A character
    device driver may want to pass regs to the sysrq handler through the input
    layer which adds another few layers of parameter passing.

    I've build this code with allyesconfig for x86_64 and i386. I've runtested the
    main part of the code on FRV and i386, though I can't test most of the drivers.
    I've also done partial conversion for powerpc and MIPS - these at least compile
    with minimal configurations.

    This will affect all archs. Mostly the changes should be relatively easy.
    Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

    struct pt_regs *old_regs = set_irq_regs(regs);

    And put the old one back at the end:

    set_irq_regs(old_regs);

    Don't pass regs through to generic_handle_irq() or __do_IRQ().

    In timer_interrupt(), this sort of change will be necessary:

    - update_process_times(user_mode(regs));
    - profile_tick(CPU_PROFILING, regs);
    + update_process_times(user_mode(get_irq_regs()));
    + profile_tick(CPU_PROFILING);

    I'd like to move update_process_times()'s use of get_irq_regs() into itself,
    except that i386, alone of the archs, uses something other than user_mode().

    Some notes on the interrupt handling in the drivers:

    (*) input_dev() is now gone entirely. The regs pointer is no longer stored in
    the input_dev struct.

    (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
    something different depending on whether it's been supplied with a regs
    pointer or not.

    (*) Various IRQ handler function pointers have been moved to type
    irq_handler_t.

    Signed-Off-By: David Howells
    (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

    David Howells
     

03 Jul, 2006

1 commit

12 Apr, 2006

2 commits

22 Mar, 2006

1 commit

03 Jan, 2006

4 commits

04 Nov, 2005

1 commit

12 Sep, 2005

2 commits

  • 9e76a76ef   [ALSA] Replace with kzalloc() - isa stuff ... Browse Code »

    ES18xx driver,OPL3SA2 driver,AD1816A driver,AD1848 driver,CS4231 driver
    ES1688 driver,GUS Library,Opti9xx drivers,EMU8000 driver
    SB16/AWE driver,SB drivers
    Replace kcalloc(1,..) with kzalloc().

    Signed-off-by: Takashi Iwai

    Takashi Iwai
     
  • 43bcd973d   [ALSA] Add snd_card_set_generic_dev() call to ISA drivers ... Browse Code »

    ISA,CMI8330 driver,ES18xx driver,OPL3SA2 driver,Sound Galaxy driver
    Sound Scape driver,AD1848 driver,CS4231 driver,CS4236+ driver
    ES1688 driver,GUS Classic driver,GUS Extreme driver,GUS MAX driver
    AMD InterWave driver,Opti9xx drivers,SB16/AWE driver,SB8 driver
    Wavefront drivers
    - Added snd_card_set_generic_dev() call.
    - Added SND_GENERIC_DRIVER to Kconfig.
    - Clean up the error path in probe if necessary.

    Signed-off-by: Takashi Iwai

    Takashi Iwai
     

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds