29 Aug, 2008
16 commits
-
1. Implement 7.1 Output for vt1618 codec.
2. Fix typos in comments from my previous 1617a patch.Signed-off-by: John L. Utz III
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Pop time configuration is a debugging feature which shouldn't be used in
normal operation so move it to debugfs where it is clearer. This also
simplifies the code since debugfs provides standard facilities for
exposing simple integer values to user space.Signed-off-by: Mark Brown
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Added the descriptions of missing model values.
Also, fixed the model strings of a few new models to a standard style.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Add a workaround for bad DMA-position reporting on VIA chipset.
Signed-off-by: Joseph Chan
[modified and cleaned up by tiwai]
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Fix a few issues identified by Jean Delvare:
- Add missing newline to error display.
- Return an error when we fail to locate the I2C adaptor.
- Remove the static wm8903_i2c_device Jean suggested, it's redundant.Signed-off-by: Mark Brown
Acked-by: Jean Delvare
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Two warning messages lack their trailing new-line, add it.
Signed-off-by: Jean Delvare
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
- Add support for ECS (1019:9087)
- Delete G71V record from alc662_cfg_tbl[]
The PCI SubsystemID was the same with M70V
- Add more ASUS notebook supportSigned-off-by: Kailang Yang
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
- Add Lenovo Sky support (17aa:101d)
- Add ASUS M90V support (1043:8317)
- Add ASUS Eee 1601 support (1043:835f)Signed-off-by: Kailang Yang
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Added the support of Quanta FL1 with ALC269 code chip.
Also a bit space clean-ups.Signed-off-by: Kailang Yang
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Added the support of Acer Aspire One with ALC269 codec chip.
Signed-off-by: Kailang Yang
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Added the support of Toshiba S06 with ALC262 codec chip.
Signed-off-by: Kailang Yang
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Fixed the support of HP DC7600 with ALC260, which was formerly handled
as model=hp-3013.Signed-off-by: Kailang Yang
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Signed-off-by: Kailang Yang
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
The WM8903 is a high performance ultra-low power stereo CODEC optimised
for portable audio applications. Features include:* 5mW power consumption for DAC to headphone playback
* Stereo DAC SNR 96dB typical, THD -86dB typical
* Stereo ADC SNR 93dB typical, THD -80dB typical
* Up to 3 single ended inputs per stereo channel
* Up to 2 pseudo differential inputs per stereo channel
* Up to 1 fully differential mic input per stereo channel
* Digital Dynamic Range Controller (compressor/limiter)
* Digital sidetone mixingSigned-off-by: Mark Brown
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Make ',' delimited with space as for other entries in table.
Signed-off-by: Jaroslav Kysela
25 Aug, 2008
24 commits
-
Use the wss_dout function which does not mess
shadowed register values during chip probing.
Otherwise, user ends up with stupid mixer settings
after driver loading.Signed-off-by: Krzysztof Helt
Acked-by: Rene Herman
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Signed-off-by: Rene Herman
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
- more register naming work
- finally figured out that weird CR register stuff
(and did I mention that I hate _really_ undecipherable open-coded values?)
- fix handling of IRQ sharing in interrupt handler
(hopefully properly, otherwise I'd be grateful to hear your
pedantic comments ;)
- add handy SPECS_PAGE references wherever useful
- comments, cleanup
- add me as module authorSigned-off-by: Andreas Mohr
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
ALC269 capture source wasn't properly set up.
It's an independent MUX (0x23), not a source of ADC.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Check continuous pages in the buffer set up so that the number of
BDL is reduced. Also increased the max buffer size.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
The errors at buffer preallocations aren't fatal and safe to ignore.
The buffer will be allocated dynamically when opened.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Check the continuity of allocated pages to reduce the BDL size as much
as possible so that it can use more than 1MB buffers.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Most hardwares have limited buffer-descriptor table length. This
also restricts the max buffer size of the sound driver.
For example, snd-hda-intel has 1MB buffer size limit, and this is
because it can have at most 256 BDL entries. For supporting larger
buffers, we need to allocate larger pages even for sg-buffers.This patch changes the sgbuf allocation code to try to allocate
larger pages first. At each head of the allocated pages, the
number of allocated pages is stored in the lowest bits of the
corresponding entry of the table addr field. This change isn't
visible as long as the driver uses snd_sgbuf_get_addr() helper.Also, the patch adds a new function, snd_pcm_sgbuf_get_chunk_size().
This returns the size of the chunk on continuous pages starting at
the given position offset. If the chunk reaches to a non-continuous
page, it returns the size to the boundary.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
snd_dma_alloc_pages_fallback() always tries to reduce the size in a half,
but it's not good when the given size isn't a power-of-two.
Check it first then try to align.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Clean up SG-buffer helper functions and macros. Helpers take substream
as arguments now.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
It is ALSA bug #1754.
D6 bit in 02 register is PW4.Signed-off-by: Alexander Beregalov
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
ALC269 codec has a beep, but it was not used, so far.
Create a beep control appropriately.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Signed-off-by: Roel Kluin
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Replace snd_opl3sa2_info_xxx() with snd_wss_info_xxx().
Drop check of card->private_data which cannot be NULL
if card is not NULL (spotted by Rene Herman).Signed-off-by: Krzysztof Helt
Reviewed-by: Rene Herman
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
- use specs-derived register name enums instead of open-coded numeric
values, for better understanding of things
- fix naming confusion ("gcr" was _NOT_ the GCR register stuff, but
instead the io _base_ which has multiplexed _access_ to GCR config
space, at _sub_ registers 0x08 and 0x0c)
- add FIXME comments about a race condition and MPU401 featuresSigned-off-by: Andreas Mohr
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Added tiwai to MAINTAINERS (per request of akpm)
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
With the restructering of the indy button handling the old OSS HAL2 driver
got broken. Since there is a new ALSA driver for HAL2, the experimental
OSS driver is obsolete and will be removed by this patch.Signed-off-by: Thomas Bogendoerfer
Cc: Ralf Baechle
Signed-off-by: Andrew Morton
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
When bdl_pos_adj=0 is given, disable the position-check and the delayed
period update mechanism. Usually bdl_pos_adj=0 is set only for the
debugging purpose on really broken hardwares. It's better to disable
the extra complexity in such a case.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Mute sound by setting mute bit without
setting volume to 0. It makes both source code
and binary shorter.Signed-off-by: Krzysztof Helt
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Added the basic support of AD1882A codec chip.
It's almost compatible with AD1882, but with a digital mic and some
differences in connections.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Remove card pointer from the snd_opl3sa2
structure and break circular reference
snd_card->snd_opl3sa2->snd_card.Signed-off-by: Krzysztof Helt
Acked-by: Rene Herman
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Set up channel information for HDMI widgets. This will allow LPCM
with multiple channels supported on some HDMI devices.TODO: It still doesn't check ELD and doesn't change PCM parameters
dynamically.Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela -
Signed-off-by: Takashi Iwai
Signed-off-by: Jaroslav Kysela
