08 Oct, 2011
4 commits
-
The sharpsl code selects the max1111 spi driver, so it must also
ensure that SPI itself is enabled. The platform does not work
without max1111.Signed-off-by: Arnd Bergmann
Signed-off-by: Eric Miao -
The two platforms are part of the palm27x family and use the same
code. Select the palm27x symbol to make sure they can be built
standalone.Signed-off-by: Arnd Bergmann
Signed-off-by: Eric Miao -
The raumfeld platform code calls power_supply_set_battery_charged
which is part of the power supply layer, so that always has
to be enabled.Signed-off-by: Arnd Bergmann
Signed-off-by: Eric Miao -
We cannot support ARMv5 and ARMv7 based boards in a single kernel,
so introduce a new option in mach-pxa to select between the two.The PJ4 (ARMv7) based boards are now only visible when
CONFIG_ARCH_PXA_V7 is set, the other boards are only visible
when it's not set.Signed-off-by: Arnd Bergmann
Signed-off-by: Eric Miao
25 May, 2011
1 commit
-
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS
preprocessor conditionals as partitioning is always available.Cc: Cc: David Woodhouse
Cc: Artem Bityutskiy
Signed-off-by: Jamie Iles
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse
07 Jan, 2011
2 commits
-
Conflicts:
arch/arm/mach-pxa/clock.c
arch/arm/mach-pxa/clock.h -
Conflicts:
arch/arm/Kconfig
arch/arm/common/Makefile
arch/arm/kernel/Makefile
arch/arm/kernel/smp.c
20 Dec, 2010
2 commits
-
Rename colibri-pxa270-evalboard to colibri-evalboard as this board is used with
all Colibri modules.Signed-off-by: Marek Vasut
Acked-by: Daniel Mack
Signed-off-by: Eric Miao -
This change -- pushing the MFP configuration back into Module files -- is
necessary because some evalboards can be used with multiple modules, where MFP
differs from module to module. Therefore MFP isn't board-specific, but
module-specific and the module should preconfigure itself for the board.(And there is also the C preprocesor limitation and conflicting #define-s)
Signed-off-by: Marek Vasut
Acked-by: Daniel Mack
Signed-off-by: Eric Miao
18 Dec, 2010
2 commits
-
Saarb platform is a handheld platform that supports Marvell PXA955 silicon.
Signed-off-by: Haojian Zhuang
Signed-off-by: Eric Miao -
The core of PXA955 is PJ4. Add new PJ4 support. And add new macro
CONFIG_PXA95x.Signed-off-by: Haojian Zhuang
Signed-off-by: Eric Miao
16 Dec, 2010
1 commit
-
As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}()
directly.Signed-off-by: Lennert Buytenhek
Signed-off-by: Eric Miao
05 Dec, 2010
1 commit
-
Today more boards with arm cpu have selectable pci bus.
This patch makes this more scalable and remove line continuations in
KconfigAcked-by: Arnd Bergmann
Signed-off-by: Hans Ulli Kroll
Signed-off-by: Russell King
09 Oct, 2010
1 commit
-
Bringup tavorevb3 development platform. UART and PMIC are enabled.
Signed-off-by: Haojian Zhuang
Signed-off-by: Eric Miao
08 Oct, 2010
2 commits
-
Signed-off-by: Haojian Zhuang
Acked-by: Antonio Ospite
Signed-off-by: Eric Miao -
USB2.0 Device Controller (U2DC) which is found in Marvell PXA3xx.
U2DC supports both High and Full speed modes.
PXA320 and PXA300 U2DC supports only UTMI interface.
PXA310 U2DC supports only ULPI interface and has the OTG capability.U2D Controller ULPI driver introduced in this patch supports only the
PXA310 USB Host via the ULPI.Signed-off-by: Igor Grinberg
Signed-off-by: Mike Rapoport
Signed-off-by: Eric Miao
05 Aug, 2010
5 commits
-
Signed-off-by: Marek Vasut
-
This contains common code for Palm LD, TX, T5, Z72, Treo680, Centro
This code also adds PMIC support for all the devices,Signed-off-by: Marek Vasut
-
CORGI_SSP_DEPRECATED doesn't exist in Kconfig, therefore removing all
references for it from the source code.Signed-off-by: Christoph Egger
Acked-by: Kristoffer Ericson
Signed-off-by: Eric Miao -
With kexec-based kernel boot loader on Zaurus, the machine ID is
actually correctly passed, and head-sharpsl.S is not necessary.
Introduce PXA_SHARPSL_DETECT_MACH_ID, and include head-sharpsl.S
only when that's explicitly enabled.Signed-off-by: Eric Miao
-
1. TOSA related un-hidden options moved to right under MACH_TOSA
2. SHARPSL_PM related hidden options moved to the end of KconfigSigned-off-by: Eric Miao
18 Jun, 2010
2 commits
-
This is support for custom design based on Toradex Colibri PXA270 CPU card.
Initial patch was by Pavel Revak.[daniel - rebased the code to follow the module/board split]
Signed-off-by: Marek Vasut
Cc: Pavel Revak
Cc: Daniel Mack
Signed-off-by: Eric Miao -
Follow the idea of several MX31 based boards and split code that is
related to the module from code that is baseboard specific. This makes
adding new base board support easier, while avoiding code duplication.Signed-off-by: Daniel Mack
Acked-by: Marek Vasut
Signed-off-by: Eric Miao
11 May, 2010
8 commits
-
This patch adds support for the on-board IDE channel. I tested this with a CDROM
connected over 2.5-3.5 IDE reduction with external power supplied to the CDROM.
This was not tested with the Voipac 270-HDD-000 (official Voipac HDD module),
but I expect no problems.Signed-off-by: Marek Vasut
Signed-off-by: Eric Miao -
This patch adds basic support for the Voipac PXA270 SBC.
The device consists of the following hardware:
- PXA270 @ 520 MHz
- 256MB RAM (sparsemem, 2*128MB regions)
- 64MB NOR flash
- 640x480 LCD
- Ports: 2xUHC, 1xUDC, 1xPCMCIA, VGA, FFUART, 2xPS2, Speaker, MICSigned-off-by: Marek Vasut
Signed-off-by: Eric Miao -
This patch adds support for the Zipit Z2. The parts missing from this
patch are the battery support, SPI driver for the LCD and support for
the Silicon Serial ID chip.Signed-off-by: Marek Vasut
Signed-off-by: Eric Miao -
Tosa is now able to use generic matrix keypad driver instead of the deprecated
tosakbd.c, where CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is still useful. Move
it to mach/Kconfig.Signed-off-by: Eric Miao
-
PXA_SSP is actually used by drivers like drivers/spi/pxa2xx_spi.c and
sound/soc/pxa/pxa-ssp.c, not by boards. Remove those incorrect 'select'
from Kconfig and make SOC_PXA_SSP to select.Signed-off-by: Eric Miao
-
Signed-off-by: Haojian Zhuang
Acked-by: Mark Brown
Signed-off-by: Eric Miao -
Signed-off-by: Eric Miao
-
The only use of corgi_ssp.c is corgi_ts.c, which is now deprecated
and removed. Remove corgi_ssp.c and corgi_lcd.c and their relevant
function declarations and data structures.Signed-off-by: Eric Miao
Cc: Richard Purdie
Cc: Pavel Machek
22 Mar, 2010
2 commits
-
sharpsl_pm.c actually depends on max1111 driver being built-in when
not using legacy ssp code.Reported-by: Jonathan Cameron
Signed-off-by: Eric Miao -
Reported-by: Jonathan Cameron
Signed-off-by: Eric Miao
02 Mar, 2010
3 commits
-
Signed-off-by: Eric Miao
-
Signed-off-by: Edwin Peer
Signed-off-by: Eric Miao -
IRQ_LOCOMO_* are never used elsewhere, remove these definitions. As well
as the cascade of these IRQs. IRQ_LOCOMO_*_BASE changed to IRQ_LOCOMO_*.IRQ_LOCOMO_LT and IRQ_LOCOMO_SPI are likely to be used in a same way as
IRQ_LOCOMO_KEY.IRQ_LOCOMO_GPIO and the demultiplex handler should really be living
somewhere else.Signed-off-by: Eric Miao
28 Jan, 2010
1 commit
29 Dec, 2009
1 commit
-
This has to be selected, otherwise some peripherals don't get initialized.
Signed-off-by: Marek Vasut
Signed-off-by: Eric Miao
18 Dec, 2009
1 commit
-
This adds support for Raumfeld's 'Controller', 'Connector', 'Speaker S'
and 'Speaker M' devices. They're all based on PXA303 SoCs.Signed-off-by: Daniel Mack
Signed-off-by: Eric Miao
16 Dec, 2009
1 commit
-
Signed-off-by: Igor Grinberg
Signed-off-by: Mike Rapoport
Signed-off-by: Eric Miao