19 Oct, 2006
4 commits
-
Update the documentation for the k8temp driver.
Signed-off-by: Rudolf Marek
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
The SMSC LPC47M112 Super-I/O chip appears to be compatible with the
LPC47M10x and LPC47M13x as far as hardware monitoring is concerned.
The device ID is even the same, so it's really only a documentation
update.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Fix typos in hardware monitoring documentation.
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Replace a bouncing email that I cannot recover from Mr Google.
Signed-off-by: Grant Coady
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
29 Sep, 2006
9 commits
-
hwmon: Remove Yuan Mu's address
Yuan Mu no longer works at Winbond.
I wish to publicly thank Yuan for his help with Winbond hardware
monitoring chips support during the past 10 months.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
vt1211: Document module parameters
Add a description of the module parameters to the documentation of
the vt1211 driver.Signed-off-by: Juerg Haefliger
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
vt1211: Add documentation
Add documentation for the new vt1211 hardware monitoring driver.
Signed-off-by: Juerg Haefliger
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
w83791d: Documentation update
The alarm bits and the beep enable bits are in different positions in
the hardware. Document the problem and leave it to the user-space code
to handle the situation. When this driver is updated to the standardized
sysfs alarm/beep methodology, this won't be a problem.This is a documentation only change.
Signed-off by: Charles Spirakis
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
k8temp: Add documentation
Add promised documentation for the k8temp driver.
Signed-off-by: Rudolf Marek
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
it87: Copyright update
I think my contributions to the it87 driver over the past two
years qualify me as a co-author of this driver.Also drop old comments of dubious usefulness.
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
it87: Add support for the IT8718F
The IT8718F is a Super-I/O chip with integrated hardware monitoring
functions. It is very similar to the IT8716F, so adding support to the
it87 driver was pretty straightforward. The most significant difference
is that the IT8718F has up to 8 VID pins, instead of 6 for the older
chips.For the IT8718F, the VID value can only be read from Super-I/O space.
Userspace support is already in lm_sensors SVN (to be soon released
as 2.10.1.)Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
it87: Add support for the IT8716F
The IT8716F is a Super-I/O chip with integrated hardware monitoring
functions. It is very similar to the IT8712F, so adding support to the
it87 driver was pretty straightforward. The most significant change here
is that the IT8716F has 16-bit fan speed counters, so the user no more
needs to tweak the fan clock dividers to get the best readings.Userspace support is already in lm_sensors SVN (to be soon released
as 2.10.1.)Thanks to Stian Oksavik, Olivier Nicolas, Prakash Punnoor and
Juergen Kilb for testing the early versions of this patch.Thanks also to ITE for providing datasheets and answering my questions.
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Add documentation for the w83627ehf hardware monitoring driver.
Signed-off-by: Rudolf Marek
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
13 Jul, 2006
1 commit
-
Documentation update for the new bank1_types module param.
Also add what we know about different revisions of the uGuru and
a note that the abituguru driver unfortunatly does not work with the
latest and greatest motherboards, which have what I think is revision
4 of the uGuru.Signed-off-by: Hans de Goede
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
23 Jun, 2006
10 commits
-
This driver implements support for the National Semiconductor LM70
temperature sensor.The LM70 temperature sensor chip supports a single temperature sensor.
It communicates with a host processor (or microcontroller) via an
SPI/Microwire Bus interface.Communication with the LM70 is simple: when the temperature is to be sensed,
the driver accesses the LM70 using SPI communication: 16 SCLK cycles
comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's
complement digital temperature (sent via the SIO line), is available in the
driver for interpretation. This driver makes use of the kernel's in-core
SPI support.Signed-off-by: Kaiwan N Billimoria
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
New hardware monitoring driver for the Abit uGuru
Signed-off-by: Hans de Goede
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Reword and complete certain parts of the hwmon sysfs-interface
documentation file. Hopefully this will make things clearer for new
driver authors.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
This patch cleans up hwmon sysfs documentation file, plus introduces
the description of DC/PWM selection for fan speed control.Signed-off-by: Rudolf Marek
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Improve the help text for CONFIG_HWMON to let the users know how they
pick the right hardware monitoring driver(s) for their system.Also fix a couple typos in the related documentation file and improve
some parts a bit.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
One more motherboard confirmed to have an LM83 temperature sensor chip.
Thanks to Steven Hardy for reporting.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Add support for the w83791d sensor chip. The w83791d hardware is
somewhere between the w83781d and the w83792d and this driver code
is derived from the code that supports those chips.Signed-off-by: Charles Spirakis
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Extend the sysfs interface of hardware monitoring chips, by adding
individual alarm and beep files. Contrary to the old aggregated "alarms"
and "beeps" files, individual files constitute a standard way to access
the status information, making it finally possible to implement a
chip-independant hardware monitoring chip access library (once all
drivers have been added this new interface, that is.)If future drivers need more individual files, the interface will be
extended as needed at the same time these drivers are merged into the
kernel tree.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
New driver (smsc47m192) which supports voltage and temperature
measurement features of SMSC LPC47M192 and LPC47M997 chips.Signed-off-by: Hartmut Rick
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Add LM82 temperature sensor support (similar to the LM83,
but less featureful).Signed-off-by: Jordan Crouse
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
24 Mar, 2006
3 commits
-
Stop resetting the chip on load by default, so as to preserve the BIOS
initializations. Same was done in the w83627hf driver some times ago
for the same reasons.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Document the individual alarm and beep bits of the w83781d driver.
Ideally we would offer a chip-independant interface for them, but
until it's done, it's only fair that we document the current
interface.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Add support for the Winbond W83687THF chip to the w83627hf hardware
monitoring driver. This new chip is almost similar to the already
supported W83627THF chip, except for VID and a few other minor
changes.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
14 Feb, 2006
1 commit
-
Document the reset module parameter which was recently added to the
w83627hf driver.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
07 Feb, 2006
3 commits
-
Only scan I2C address 0x2d. This is the default address and no IT87xxF
chip was ever seen on I2C at a different address. These chips are
better accessed through their ISA interface anyway.This fixes bug #5889, although it doesn't address the whole class
of problems. We'd need the ability to blacklist arbitrary I2C addresses
on systems known to contain I2C devices which behave badly when probed.Plan the I2C interface for removal as well. If nobody complains within
a year, it will confirm my impression that the I2C interface isn't
actually needed by anyone.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
This is my f71805f hardware monitoring driver ported from lm_sensors
to Linux 2.6. This new driver differs from the other hardware monitoring
drivers in that it is implemented as a platform driver. This might not
be optimal yet (we would probably need a generic infrastructure and bus
type for Super-I/O logical devices) but it is certainly much better than
the i2c-isa solution.Note that this driver requires lm_sensors CVS. I hope to get it
released as 2.10.0 soon.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Add some documentation for the new f71805f driver. This is almost the
same help that was present in lm_sensors, with a few minor layout fixes.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
06 Jan, 2006
1 commit
-
This patch clarifies the W83627THF VID documentation.
Signed-off-by: Mark M. Hoffman
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
29 Oct, 2005
6 commits
-
The SMSC LPC47M997 Super-I/O chip seems to be compatible with the
LPC47M192, so it is supported by the smsc47m1 driver.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Update the I2C addresses for the ADM1032 and ADT7461 chips.
Also update the links to the Analog Devices web site.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Add PEC support to the lm90 driver. Only the ADM1032 chip supports it,
and in a rather tricky way, which is why this patch comes with
documentation reinforcements. At least, this demonstrates that the new
PEC support logic in i2c-core can properly deal with chips with partial
PEC support.As enabling PEC causes a significant performance drop, it can be
disabled through a sysfs file (unsurprisingly named "pec").Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
This patch adds a new ID to the SMSC LPC47B397-NC hardware
monitoring driver - for a chip that is claimed to be 100%
compatible otherwise.Signed-off-by: Bryan Young (Utilitek Systems, Inc.)
Signed-off-by: Mark M. Hoffman
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Drop legacy ISA address support from the it87 driver. All supported
chips are Super-I/O chips, so the device ISA address can be safely read
from Super-I/O space rather than blindly assumed.Two nearby inaccurate documentation statements have been fixed as well:
* The IT8705F doesn't have an SMBus interface.
* The SiS950 doesn't have a distinct prefix.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Do not enable the VIA VT82C686A/B integrated sensors by default, as
disabled sensors usually means that this feature is not used so the
values won't make any sense. This has been confusing many users in the
past:http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1786
http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1811
http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=2052It is still possible to forcibly enable the sensors by using the
force_addr module parameter.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-HartmanDocumentation/hwmon/via686a | 17 +++++++++++++++--
drivers/hwmon/via686a.c | 18 +++++++++++-------
2 files changed, 26 insertions(+), 9 deletions(-)
06 Sep, 2005
2 commits
-
This patch adds documentation entry for W83792D chip.
Signed-off-by: Rudolf Marek
Signed-off-by: Greg Kroah-Hartman -
Drop the separate client name for the LM78-J chip. This is really
only a later revision of the LM78, with almost no difference and
no difference the driver handles in any case.This was the only client name that had a dash in it, and special care
had to be taken in libsensors because of it. As we plan to write a new
library soon, I'd like to get rid of this exception before we do.As a nice side effect, it saves 876 bytes in lm78.ko.
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman