27 Nov, 2008
5 commits
-
Include firmware and protocol images in the kernel image if requested
Signed-off-by: Divy Le Ray
Signed-off-by: David S. Miller -
Add consistency in alloc_ring() parameter checking
to avoid potential memory leaks.
alloc_ring() callers are correct fo far.Signed-off-by: Divy Le Ray
Signed-off-by: David S. Miller -
Fix t3_eth_xmit() missing into the netdev_ops structure.
Signed-off-by: Divy Le Ray
Signed-off-by: David S. Miller -
Since all other gen_estimator functions use bstats and rate_est params
together, and searching for them is optimized now, let's use this also
in gen_estimator_active(). The return type of gen_estimator_active()
is changed to bool, and gen_find_node() parameters to const, btw.In tcf_act_police_locate() a check for ACT_P_CREATED is added before
calling gen_estimator_active().Signed-off-by: Jarek Poplawski
Signed-off-by: David S. Miller
26 Nov, 2008
35 commits
-
Some print_mac -> %pM conversions got lost in some merge or another...
Signed-off-by: John W. Linville
-
Signed-off-by: Ivan Kuten
Signed-off-by: John W. Linville -
This patch fixes a regression (introduced by
"p54: more definitions form lmac_longbow.h and pda.h")It turned out that the "ret" variable wasn't initialized and
this caused the following warnings/errors to appear:wmaster1: failed to set TX queue parameters for queue 2
wmaster1: failed to set TX queue parameters for queue 3
wmaster1: failed to set TX queue parameters for queue 1
wmaster1: failed to set TX queue parameters for queue 0Signed-off-by: Christian Lamparter
Signed-off-by: John W. Linville -
The TX channel width of the BSS can be obtained only after association.
In all cases, default to HT20 if HT is enabled, and set
chan width to HT40 only if the BSS supports it.Signed-off-by: Sujith
Signed-off-by: John W. Linville -
Merge core.c and base.c
Remove Antenna Diversity (unused now).
Remove unused chainmask handling code.
Comment, indentation scrub.Signed-off-by: Sujith
Signed-off-by: John W. Linville -
In order to be consistent with NL80211_ATTR_POWER_RULE_MAX_EIRP,
change NL80211_FREQUENCY_ATTR_MAX_TX_POWER to use mBm and U32 instead
of dBm and U8. This is a userspace interface change, but the previous
version had not yet been pushed upstream and there are no userspace
programs using this yet, so there is justification to get this change in
as long as it goes in before the previous version gets out.Signed-off-by: Jouni Malinen
Signed-off-by: John W. Linville -
Make firmware caching on startup optional, and make it default.
When the option is not selected and PM_SLEEP is configured, then
cache firmware in the suspend pm_notifier. This configuration saves
about 64k RAM in normal use, but can lead to a situation where the
driver is configured to use a different firmware.Signed-off by: David Kilroy
Signed-off-by: John W. Linville -
Retrieval of external firmware has been resolved, and should work with
the standard orinoco resume algorithm.This fixes an issue where priv->hw_unavailable indicates the card is
ready when firmware has not been loaded.Signed-off by: David Kilroy
Signed-off-by: John W. Linville -
Signed-off by: David Kilroy
Signed-off-by: John W. Linville -
This refactorring will make it easier to share logic with Symbol
firmware.Signed-off by: David Kilroy
Signed-off-by: John W. Linville -
We would get an oops on RX on -ENOMEM by passing
NULL to the hardware on ath_rx_buf_link(). The oops
would look something like this:ath_rx_tasklet+0x515/0x53b
ath9k_tasklet+0x48
tasklet_action
__do_softirq
irq_exit
do_IRQRIP: ath_rx_buf_link+0x3a
We correct this by handling the requeue directly on
the ath_rx_tasklet() and trying to allocate an skb
*prior* to sending up the last hardware processed
skb. If we run out of memory this gauranteees we have
skbs to work with while it simply drops new received
frames.Signed-off-by: Luis R. Rodriguez
Signed-off-by: John W. Linville -
We "optimize" away the get_state() hook call on rfkill_toggle_radio
when doing a forced state change. This means the resume path is not
calling get_state() as it should.Call it manually on the resume handler, as we don't want to mess with
the EPO path by removing the optimization. This has the added benefit
of making it explicit that rfkill->state could have been modified
before we hit the rfkill_toggle_radio() call in the class resume
handler.Signed-off-by: Henrique de Moraes Holschuh
Acked-by: Ivo van Doorn
Cc: Matthew Garrett
Cc: Alan Jenkins
Signed-off-by: John W. Linville -
The rfkill class API requires that the driver connected to a class
call rfkill_force_state() on resume to update the real state of the
rfkill controller, OR that it provides a get_state() hook.This means there is potentially a hidden call in the resume code flow
that changes rfkill->state (i.e. rfkill_force_state()), so the
previous state of the transmitter was being lost.The simplest and most future-proof way to fix this is to explicitly
store the pre-sleep state on the rfkill structure, and restore from
that on resume.Signed-off-by: Henrique de Moraes Holschuh
Acked-by: Ivo van Doorn
Cc: Matthew Garrett
Cc: Alan Jenkins
Signed-off-by: John W. Linville -
When a disassoc packet is received from the AP with a reason code of
'leaving the BSS', mac80211 should go into DISABLED state just as it
would do if the AP suddenly went away for some reason, as that is what
will happen shortly after the AP leaves anyway.Signed-off-by: Vivek Natarajan
Acked-by: Johannes Berg
Signed-off-by: John W. Linville -
This is useful information to provide for userspace (e.g., hostapd needs
this to generate Country IE).Signed-off-by: Jouni Malinen
Signed-off-by: John W. Linville -
This patch brings the ath5k eeprom parsing code in sync with the work
done on ath_info by Nick Kossifidis and integrates the missing parts
based on the code of the Atheros Legacy HAL release.Signed-off-by: Felix Fietkau
Signed-off-by: John W. Linville -
Update the rate control only with the tx status of first
AMPDU of an aggregation. This patch fixes frequent drops
in throughput.Signed-off-by: Vasanthakumar Thiagarajan
Signed-off-by: John W. Linville -
This instructs FH to increment the retry count of a packet when
it is brought from the memory to TX-FIFO to save transactions
during aggregation flow.Signed-off-by: Tomas Winkler
Signed-off-by: Reinette Chatre
Signed-off-by: John W. Linville -
This patch configures correctly TX DMA channel. It is not
the same as TX queue.Signed-off-by: Tomas Winkler
Acked-by: Zhu Yi
Signed-off-by: Reinette Chatre
Signed-off-by: John W. Linville -
Apply same idiom as in 5000 introduced by
'iwlwifi: define firmware file name once'Signed-off-by: Tomas Winkler
Signed-off-by: Reinette Chatre
Signed-off-by: John W. Linville -
This patch adds base band calibration support.
Signed-off-by: Tomas Winkler
Signed-off-by: Reinette Chatre
Signed-off-by: John W. Linville -
This patch moves iwl_clear_stations_table into iwl-sta.c
Signed-off-by: Tomas Winkler
Signed-off-by: Reinette Chatre
Signed-off-by: John W. Linville -
Patch fixes the ad-hoc mode by
1) Removing redundant clear_stations_table which prevented generation of
beacons.
2) Setting assoc_id to 1. It was never set so preventing tx flow
in iwl3945_tx_skb.Signed-off-by: Abhijeet Kolekar
Signed-off-by: Reinette Chatre
Signed-off-by: John W. Linville -
Configure the mac address in add_interface and clear it in
remove_interface so that users can change the mac address
to something other than the one in the eeprom. Also avoid
setting it at attach time so that we won't ack packets
until fully set up.Signed-off-by: Bob Copeland
Signed-off-by: John W. Linville -
Signed-off-by: Sujith
Signed-off-by: John W. Linville -
Signed-off-by: Sujith
Signed-off-by: John W. Linville -
CHANNEL_CCK flag is set for all 2 Ghz channels, so IS_CHAN_CCK() would
turn out to be true for all channles in that band.
Use IS_CHAN_B() now, which checks the channel mode and not the channel
flags.Signed-off-by: Sujith
Signed-off-by: John W. Linville -
Also, use a helper function to setup RC status data
when processing completed TX descriptors.Signed-off-by: Sujith
Signed-off-by: John W. Linville -
Break down huge functions, use helper functions or
macros instead.Signed-off-by: Sujith
Signed-off-by: John W. Linville -
Replace TRUE/FALSE macros with VALID/INVALID macros.
Follow a consistent variable convention.
Remove unnecessary comments.
Add all RC phy macros into a single enum.
Merge functions into reasonably sized entities.Signed-off-by: Sujith
Signed-off-by: John W. Linville -
Maintaining two sets of rate tables is redundant, remove one
and use struct ath_rate_table exclusively.Signed-off-by: Sujith
Signed-off-by: John W. Linville -
Remove the hack using vif, and use rate_driver_data within
skb->cb to hold driver specific rate information.
Setup the rate series in the skb's tx control area and remove
all references to ath9k specific rate series ( using struct ath_rc_series ).Signed-off-by: Sujith
Signed-off-by: John W. Linville -
Move the hw rate tables to ath_softc, and access them directly.
tx_triglevel_max is global, move it to ath_rate_node.
Now that ath_rate_softc is gone, rate control attach becomes simpler.Signed-off-by: Sujith
Signed-off-by: John W. Linville -
Rate control init is now confined to itself, using the
HT capabilites of the STA from rate_init().Signed-off-by: Sujith
Signed-off-by: John W. Linville -
Signed-off-by: Sujith
Signed-off-by: John W. Linville
