24 Nov, 2011
2 commits
-
This protocol is found on Sanyo/Aiwa remotes.
Tested with an Aiwa RC-7AS06 remote control.
Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
21 Nov, 2011
1 commit
-
Signed-off-by: Eddi De Pieri
Signed-off-by: Mauro Carvalho Chehab
20 Nov, 2011
5 commits
-
Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
With this patch I try again to add initial support for HVR930C.
Tested only DVB-T, since in Italy Analog service is stopped.
Actually "scan -a0 -f1", find only about 50 channel while 400 should
be available.[mchehab@redhat.com: Tested with DVB-C and fixed a few whitespace issues]
Tested-by: Mauro Carvalho Chehab
Signed-off-by: Eddi De Pieri
Signed-off-by: Mauro Carvalho Chehab -
This is needed for devices with DRX-K and xc5000.
Tested with a HVR 930C hardware.
Signed-off-by: Mauro Carvalho Chehab
17 Nov, 2011
1 commit
-
As reported by Andreas Oberritter , changeset
33ba28eebc3e1758e6adc1fcec9e1e3151bac453 did the wrong thing.Fix it to properly reflect the entries for Terratec H5 revs 1 and 2,
and restore Terratec XS entry.Signed-off-by: Mauro Carvalho Chehab
12 Nov, 2011
1 commit
-
The Annex C support were broken with the previous implementation,
as, at xc5000 and tda18271c2dd, it were choosing the wrong bandwidth
for some symbol rates.At DRX-J, it were always selecting Annex A, even having Annex C
support coded there.Signed-off-by: Mauro Carvalho Chehab
11 Nov, 2011
1 commit
-
DVB-C, as defined by ITU-T J.83 has 3 annexes. The differences between
Annex A and Annex C is that Annex C uses a subset of the modulation
types, and uses a different rolloff factor. A different rolloff means
that the bandwidth required is slicely different, and may affect the
saw filter configuration at the tuners. Also, some demods have different
configurations, depending on using Annex A or Annex C.So, allow userspace to specify it, by changing the rolloff factor.
Signed-off-by: Mauro Carvalho Chehab
08 Nov, 2011
29 commits
-
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Move all USB radio devices to the top of the list and move all ISA
devices to a separate menu.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Thanks to Guennadi Liakhovetski for pointing this
out to me.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
These are really, really old drivers. These are really no longer experimental...
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
USB webcams are some of the most used V4L devices, so move it to a more
prominent place in the menu instead of being at the end.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
The support for 10-bit I2C addresses in usbvision seems plain broken
to me. I had already noticed that back in February 2007 [1]. The code
was not fixed since then, so I take it that it's not actually needed.
And as a matter of fact I don't know of any 10-bit addressed I2C
tuner, encode, decoder or the like.So let's simply get rid of the broken and useless code.
I'm also adding I2C_FUNC_I2C, as the driver and hardware support plain
I2C messaging.[1] http://marc.info/?l=linux-i2c&m=117499415208244&w=2
Signed-off-by: Jean Delvare
Signed-off-by: Mauro Carvalho Chehab -
This indeed a clone of Kworld UB499 2T
Signed-off-by: Malcolm Priestley
Signed-off-by: Mauro Carvalho Chehab -
Remove pre-processor defined as10x_handle_t data type by directly
replacing it with struct as102_bus_adapter_t. phandle is renamed
to adap inside function bodies.Cc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
Supresses following checkpatch warning:
WARNING: static const char * array should probably be static const char * constCc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
Fixes following checkpatch.pl warning:
WARNING: externs should be avoided in .c filesCc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
Cc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
The as10x_cmd.h header is not public so there should be no need
for an "extern "C"" in it.Cc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
While at it also correct some spelling errors.
Cc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
Remove some unnecessary braces. Replace spaces with tabs where
expected. Replace gcc specific __FUNCTION__ with C99 __func__.
No functional changes.Cc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
Release already acquired resources when error happens during
devices registration steps.
Use dev_err() where struct device is available, instead of driver
specific err().Cc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
Cc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Piotr Chmura
Signed-off-by: Mauro Carvalho Chehab -
It doesn't seem to be of much advantage to compile in FW_LOADER
support conditionally, then make the driver always select FW_LOADER
and remove #idefs from the code.Cc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
SPI bus driver support is not included in this module, the SPI
driver files are missing. But some bits are still present so
clean up the unused code.
The SPI driver support can be properly added later if needed.Then CONFIG_AS102_SPI and CONFIG_AS102_USB is now not needed
and the pre-processor statements using these config options
can now be removed from *.c files.Cc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
According to the kernel coding rules typedefs should be avoided,
so replace theit occurances with explicit enum/union types.Cc: Devin Heitmueller
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
Cc: Devin Heitmueller
Signed-off-by: Piotr Chmura
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
Correction of reading from frontend and represents
a SNR nonlinear scale of minimum signal to full signal.Signed-off-by: Malcolm Priestley
Signed-off-by: Mauro Carvalho Chehab -
add support for conexant PCI device 0x36c. Seems to be fully compatible with
the currently supported chips, yet the chip has different PCI ID.Signed-off-by: Peter De Schrijver
Signed-off-by: Mauro Carvalho Chehab -
The following patch adds support for the Tongwei Video Technology TD-3116 board. This
is a Bt878 based capture card with 16 inputs meant for surveilance applications.
It also offers a way to check which inputs have a video signal while capturing another
input. In addition there are a number of alarm inputs and outputs available and there
is microcontroller which is presumably intended for use as a system watchdog. None of
these extra capabilities are supported by the patch.Signed-off-by: Peter De Schrijver
Signed-off-by: Mauro Carvalho Chehab -
IT9135 devices do support USB 1.
Support added with restricton on pid count to 5.
IT9137 devices wil not connect in USB 1 mode.Signed-off-by: Malcolm Priestley
Signed-off-by: Mauro Carvalho Chehab -
64933337e3cb61ca555969a35ab68b477db34ee2
[media] tvp5150: Add video format registers configuration valuesAdded constants for each video standard supported by TVP5150, so this patch
get rid of the magic numbers.Signed-off-by: Javier Martinez Canillas
Signed-off-by: Mauro Carvalho Chehab