22 May, 2010
4 commits
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits)
fix handling of offsets in cris eeprom.c, get rid of fake on-stack files
get rid of home-grown mutex in cris eeprom.c
switch ecryptfs_write() to struct inode *, kill on-stack fake files
switch ecryptfs_get_locked_page() to struct inode *
simplify access to ecryptfs inodes in ->readpage() and friends
AFS: Don't put struct file on the stack
Ban ecryptfs over ecryptfs
logfs: replace inode uid,gid,mode initialization with helper function
ufs: replace inode uid,gid,mode initialization with helper function
udf: replace inode uid,gid,mode init with helper
ubifs: replace inode uid,gid,mode initialization with helper function
sysv: replace inode uid,gid,mode initialization with helper function
reiserfs: replace inode uid,gid,mode initialization with helper function
ramfs: replace inode uid,gid,mode initialization with helper function
omfs: replace inode uid,gid,mode initialization with helper function
bfs: replace inode uid,gid,mode initialization with helper function
ocfs2: replace inode uid,gid,mode initialization with helper function
nilfs2: replace inode uid,gid,mode initialization with helper function
minix: replace inode uid,gid,mode init with helper
ext4: replace inode uid,gid,mode init with helper
...Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)
-
Conflicts:
drivers/md/md.c- Resolved conflict in md_update_sb
- Added extra 'NULL' arg to new instance of sysfs_get_dirent.Signed-off-by: NeilBrown
-
Now that the last user passing a NULL file pointer is gone we can remove
the redundant dentry argument and associated hacks inside vfs_fsynmc_range.The next step will be removig the dentry argument from ->fsync, but given
the luck with the last round of method prototype changes I'd rather
defer this until after the main merge window.Signed-off-by: Christoph Hellwig
Signed-off-by: Al Viro -
The problem. When implementing a network namespace I need to be able
to have multiple network devices with the same name. Currently this
is a problem for /sys/class/net/*, /sys/devices/virtual/net/*, and
potentially a few other directories of the form /sys/ ... /net/*.What this patch does is to add an additional tag field to the
sysfs dirent structure. For directories that should show different
contents depending on the context such as /sys/class/net/, and
/sys/devices/virtual/net/ this tag field is used to specify the
context in which those directories should be visible. Effectively
this is the same as creating multiple distinct directories with
the same name but internally to sysfs the result is nicer.I am calling the concept of a single directory that looks like multiple
directories all at the same path in the filesystem tagged directories.For the networking namespace the set of directories whose contents I need
to filter with tags can depend on the presence or absence of hotplug
hardware or which modules are currently loaded. Which means I need
a simple race free way to setup those directories as tagged.To achieve a reace free design all tagged directories are created
and managed by sysfs itself.Users of this interface:
- define a type in the sysfs_tag_type enumeration.
- call sysfs_register_ns_types with the type and it's operations
- sysfs_exit_ns when an individual tag is no longer valid- Implement mount_ns() which returns the ns of the calling process
so we can attach it to a sysfs superblock.
- Implement ktype.namespace() which returns the ns of a syfs kobject.Everything else is left up to sysfs and the driver layer.
For the network namespace mount_ns and namespace() are essentially
one line functions, and look to remain that.Tags are currently represented a const void * pointers as that is
both generic, prevides enough information for equality comparisons,
and is trivial to create for current users, as it is just the
existing namespace pointer.The work needed in sysfs is more extensive. At each directory
or symlink creating I need to check if the directory it is being
created in is a tagged directory and if so generate the appropriate
tag to place on the sysfs_dirent. Likewise at each symlink or
directory removal I need to check if the sysfs directory it is
being removed from is a tagged directory and if so figure out
which tag goes along with the name I am deleting.Currently only directories which hold kobjects, and
symlinks are supported. There is not enough information
in the current file attribute interfaces to give us anything
to discriminate on which makes it useless, and there are
no potential users which makes it an uninteresting problem
to solve.Signed-off-by: Eric W. Biederman
Signed-off-by: Benjamin Thery
Signed-off-by: Greg Kroah-Hartman
18 May, 2010
36 commits
-
Devices which know that they are spares do not really need to have
an event count that matches the rest of the array, so there are no
data-in-sync issues. It is enough that the uuid matches.
So remove the requirement that the event count is up-to-date.We currently still write out and event count on spares, but this
allows us in a year or 3 to stop doing that completely.Signed-off-by: NeilBrown
-
When updating the event count for a simple clean dirty transition,
we try to avoid updating the spares so they can safely spin-down.
As the event_counts across an array must be +/- 1, this means
decrementing the event_count on a dirty->clean transition.
This is not always safe and we have to avoid the unsafe time.
We current do this with a misguided idea about it being safe or
not depending on whether the event_count is odd or even. This
approach only works reliably in a few common instances, but easily
falls down.So instead, simply keep internal state concerning whether it is safe
or not, and always assume it is not safe when an array is first
assembled.Signed-off-by: NeilBrown
-
Fix: Raid-6 was not trying to correct a read-error when in
singly-degraded state and was instead dropping one more device, going to
doubly-degraded state. This patch fixes this behaviour.Tested-by: Janos Haar
Signed-off-by: Gabriele A. Trombetti
Reported-by: Janos Haar
Signed-off-by: NeilBrown
Cc: stable@kernel.org -
Some time ago we stopped the clean/active metadata updates
from being written to a 'spare' device in most cases so that
it could spin down and say spun down. Device failure/removal
etc are still recorded on spares.However commit 51d5668cb2e3fd1827a55 broke this 50% of the time,
depending on whether the event count is even or odd.
The change log entry said:This means that the alignment between 'odd/even' and
'clean/dirty' might take a little longer to attain,how ever the code makes no attempt to create that alignment, so it
could take arbitrarily long.So when we find that clean/dirty is not aligned with odd/even,
force a second metadata-update immediately. There are already cases
where a second metadata-update is needed immediately (e.g. when a
device fails during the metadata update). We just piggy-back on that.Reported-by: Joe Bryant
Signed-off-by: NeilBrown
Cc: stable@kernel.org -
read_balance uses a "unsigned long" for a sector number which
will get truncated beyond 2TB.
This will cause read-balancing to be non-optimal, and can cause
data to be read from the 'wrong' branch during a resync. This has a
very small chance of returning wrong data.Reported-by: Jordan Russell
Cc: stable@kernel.org
Signed-off-by: NeilBrown -
md/linear:mdname:
Signed-off-by: NeilBrown
-
All messages now start
md/raid0:md-device-name:Signed-off-by: NeilBrown
-
All raid10 printk messages now start
md/raid10:md-device-name:Signed-off-by: NeilBrown
-
Make sure the array name is included in a uniform way in all printk
messages.Signed-off-by: NeilBrown
-
Many 'printk' messages from the raid456 module mention 'raid5' even
though it may be a 'raid6' or even 'raid4' array. This can cause
confusion.
Also the actual array name is not always reported and when it is
it is not reported consistently.So change all the messages to start:
md/raid:%s:
where '%s' becomes e.g. md3 to identify the particular array.Signed-off-by: NeilBrown
-
RAID10 has been available for quite a while now and is quite well
tested, so we can remove the EXPERIMENTAL designation.Reported-by: Eric MSP Veith
Signed-off-by: NeilBrown -
e.g. allow md to interpret 'echo 4 > md/level' as a request for raid4.
Signed-off-by: Dan Williams
-
Level modifications change the output of mdstat. The mdmon manager
thread is interested in these events for external metadata management.Signed-off-by: Dan Williams
-
For consistency allow raid4 to takeover raid0 in addition to raid5 (with a
raid4 layout).Signed-off-by: Dan Williams
-
When a raid1 array is configured to support write-behind
on some devices, it normally only reads from other devices.
If all devices are write-behind (because the rest have failed)
it is possible for a read request to be serviced before a
behind-write request, which would appear as data corruption.So when forced to read from a WriteMostly device, wait for any
write-behind to complete, and don't start any more behind-writes.Signed-off-by: NeilBrown
-
This message seems to suggest the named device is the one on which a
read failed, however it is actually the device that the read will be
redirected to.
So make the message a little clearer.Reported-by: Tim Burgess
Signed-off-by: NeilBrown -
This is
- unnecessary because mddev_suspend is always followed by a call to
->stop, and each ->stop unregisters the thread, and
- a problem as it makes it awkwards to suspend and then resume a
device as we will want later.Signed-off-by: NeilBrown
-
This is a simple factorisation that makes mddev_find easier to read.
Signed-off-by: NeilBrown
-
We used to pass the personality make_request function direct
to the block layer so the first argument had to be a queue.
But now we have the intermediary md_make_request so it makes
at lot more sense to pass a struct mddev_s.
It makes it possible to have an mddev without its own queue too.Signed-off-by: NeilBrown
-
This moves the call to the other side of set_readonly, but that should
not be an issue.
This encapsulates in 'md_stop' all of the functionality for internally
stopping the array, leaving all the interactions with externalities
(sysfs, request_queue, gendisk) in do_md_stop.Signed-off-by: NeilBrown
-
Using do_md_stop to set an array to read-only is a little confusing.
Now most of the common code has been factored out, split
md_set_readonly off in to a separate function.Signed-off-by: NeilBrown
-
Further refactoring of do_md_stop.
This one requires some explanation as it takes code from different
places in do_md_stop, so some re-ordering happens.We only get into this part of do_md_stop if there are no active opens
of the device, so no writes can be happening and the device must have
been flushed. In md_stop_writes we want to stop any internal sources
of writes - i.e. resync - and flush out the metadata.The only code that was previously before some of this code is
code to clean up the queue, the mddev, the gendisk, or sysfs, all
of which is probably better after code that makes active changes (i.e.
triggers writes).Signed-off-by: NeilBrown
-
do_md_stop is large and clunky, so hard to understand.
This is a first step of refactoring, pulling two simple
sub-functions out.Signed-off-by: NeilBrown
-
As part of relaxing the binding between an mddev and gendisk,
we separate do_md_run into two functions.
md_run does all the work internal to md
do_md_run calls md_run and makes and changes to gendisk
that are required.Signed-off-by: NeilBrown
-
We set ->changed to 1 and call check_disk_change at the end
of md_open so that bd_invalidated would be set and thus
partition rescan would happen appropriately.Now that we call revalidate_disk directly, which sets bd_invalidates,
that indirection is no longer needed and can be removed.Signed-off-by: NeilBrown
-
Using ->array_sectors rather than get_capacity() is more
direct and is a step towards relaxing the tight connection
between mddev and gendisk.Signed-off-by: NeilBrown
-
While I generally prefer letting personalities do as much as possible,
given that we have a central md_make_request anyway we may as well use
it to simplify code.
Also this centralises knowledge of ->gendisk which will help later.Signed-off-by: NeilBrown
-
Diving through ->queue to find mddev is unnecessarily complex - there
is an easier path to finding mddev, so use that.Signed-off-by: NeilBrown
-
This is unlikely to be wanted, but we may as well provide it
for completeness.Signed-off-by: NeilBrown
-
Level changes can be very significant, so make sure
to notify them via sysfs.Signed-off-by: Maciej Trela
Signed-off-by: NeilBrown -
When metadata is being managed by user-space, md doesn't know
what the maximum number of devices allowed in an array is
so ->max_disks is 0. In this case we should allow any (+ve)
number of disks.Signed-off-by: NeilBrown
-
Writing "none" to "../md/dev-xx/slot" removes that device
from being an active part of the array, but it didn't
set ->raid_disk to -1 to record this fact.Signed-off-by: Maciej Trela
Signed-off-by: NeilBrown -
Signed-off-by: Maciej Trela
Signed-off-by: NeilBrown -
Signed-off-by: Maciej Trela
Signed-off-by: NeilBrown -
Signed-off-by: Maciej Trela
Signed-off-by: NeilBrown -
In a subsequent patch we will make it possible to change
mddev->raid_disks while a RAID0 or RAID10 array is active. This is
part of the process of reshaping such an array.This means that we cannot use this value while processes requests
(it is OK to use it during initialisation as we are locked against
changes then).
Both RAID0 and RAID10 have the same value stored in the private data
structure, so use that value instead.Signed-off-by: NeilBrown
